JavaScript Editor Source code editor     What Is Ajax 

Main Page

Appendix E. MySQL Change History

Table of Contents

E.1. Changes in release 5.0.x (Production)
E.1.1. Changes for release 5.0.27 and up
E.1.2. Changes in release 5.0.26 (03 October 2006)
E.1.3. Changes in release 5.0.25 (15 September 2006)
E.1.4. Changes in release 5.0.24a (25 August 2006)
E.1.5. Changes in release 5.0.24 (27 July 2006)
E.1.6. Changes in release 5.0.23 (Not released)
E.1.7. Changes in release 5.0.22 (24 May 2006)
E.1.8. Changes in release 5.0.21 (02 May 2006)
E.1.9. Changes in release 5.0.20a (18 April 2006)
E.1.10. Changes in release 5.0.20 (31 March 2006)
E.1.11. Changes in release 5.0.19 (04 March 2006)
E.1.12. Changes in release 5.0.18 (21 December 2005)
E.1.13. Changes in release 5.0.17 (14 December 2005)
E.1.14. Changes in release 5.0.16 (10 November 2005)
E.1.15. Changes in release 5.0.15 (19 October 2005: Production)
E.1.16. Changes in release 5.0.14 (Not released)
E.1.17. Changes in release 5.0.13 (22 September 2005: Release Candidate)
E.1.18. Changes in release 5.0.12 (02 September 2005)
E.1.19. Changes in release 5.0.11 (06 August 2005)
E.1.20. Changes in release 5.0.10 (27 July 2005)
E.1.21. Changes in release 5.0.9 (15 July 2005)
E.1.22. Changes in release 5.0.8 (Not released)
E.1.23. Changes in release 5.0.7 (10 June 2005)
E.1.24. Changes in release 5.0.6 (26 May 2005)
E.1.25. Changes in release 5.0.5 (Not released)
E.1.26. Changes in release 5.0.4 (16 April 2005)
E.1.27. Changes in release 5.0.3 (23 March 2005: Beta)
E.1.28. Changes in release 5.0.2 (01 December 2004)
E.1.29. Changes in release 5.0.1 (27 July 2004)
E.1.30. Changes in release 5.0.0 (22 December 2003: Alpha)
E.2. Changes in MySQL Cluster
E.2.1. Changes in MySQL Cluster-5.0.7 (10 June 2005)
E.2.2. Changes in MySQL Cluster-5.0.6 (26 May 2005)
E.2.3. Changes in MySQL Cluster-5.0.5 (Not released)
E.2.4. Changes in MySQL Cluster-5.0.4 (16 April 2005)
E.2.5. Changes in MySQL Cluster-5.0.3 (23 March 2005: Beta)
E.2.6. Changes in MySQL Cluster-5.0.1 (27 July 2004)
E.2.7. Changes in MySQL Cluster-4.1.13 (15 July 2005)
E.2.8. Changes in MySQL Cluster-4.1.12 (13 May 2005)
E.2.9. Changes in MySQL Cluster-4.1.11 (01 April 2005)
E.2.10. Changes in MySQL Cluster-4.1.10 (12 February 2005)
E.2.11. Changes in MySQL Cluster-4.1.9 (13 January 2005)
E.2.12. Changes in MySQL Cluster-4.1.8 (14 December 2004)
E.2.13. Changes in MySQL Cluster-4.1.7 (23 October 2004)
E.2.14. Changes in MySQL Cluster-4.1.6 (10 October 2004)
E.2.15. Changes in MySQL Cluster-4.1.5 (16 September 2004)
E.2.16. Changes in MySQL Cluster-4.1.4 (31 August 2004)
E.2.17. Changes in MySQL Cluster-4.1.3 (28 June 2004)
E.3. MySQL Connector/ODBC (MyODBC) Change History
E.3.1. Changes in Connector/ODBC 5.0.12 (Not yet released)
E.3.2. Changes in Connector/ODBC 5.0.11 (31 January 2007)
E.3.3. Changes in Connector/ODBC 5.0.10 (14 December 2006)
E.3.4. Changes in Connector/ODBC 5.0.9 (22 November 2006)
E.3.5. Changes in Connector/ODBC 5.0.8 (17 November 2006)
E.3.6. Changes in Connector/ODBC 5.0.7 (08 November 2006)
E.3.7. Changes in Connector/ODBC 5.0.6 (03 November 2006)
E.3.8. Changes in Connector/ODBC 5.0.5 (17 October 2006)
E.3.9. Changes in Connector/ODBC 5.0.3 (Connector/ODBC 5.0 Alpha 3) (20 June 2006)
E.3.10. Changes in Connector/ODBC 5.0.2 (Never released)
E.3.11. Changes in Connector/ODBC 5.0.1 (Connector/ODBC 5.0 Alpha 2) (05 June 2006)
E.3.12. Changes in Connector/ODBC 3.51.17 (Not yet released)
E.3.13. Changes in Connector/ODBC 3.51.16 (14 June 2007)
E.3.14. Changes in Connector/ODBC 3.51.15 (7 May 2007)
E.3.15. Changes in Connector/ODBC 3.51.14 (08 March 2007)
E.3.16. Changes in Connector/ODBC 3.51.13 (Never released)
E.3.17. Changes in Connector/ODBC 3.51.12
E.3.18. Changes in Connector/ODBC 3.51.11
E.4. Connector/NET Change History
E.4.1. Changes in MySQL Connector/NET Version 5.1.3 (Not yet released)
E.4.2. Changes in MySQL Connector/NET Version 5.1.2 (Not yet released)
E.4.3. Changes in MySQL Connector/NET Version 5.1.1 (23 May 2007)
E.4.4. Changes in MySQL Connector/NET Version 5.1.0 (01 May 2007)
E.4.5. Changes in MySQL Connector/NET Version 5.0.8 (Not yet released)
E.4.6. Changes in MySQL Connector/NET Version 5.0.7 (18 May 2007)
E.4.7. Changes in MySQL Connector/NET Version 5.0.6 (22 March 2007)
E.4.8. Changes in MySQL Connector/NET Version 5.0.5 (07 March 2007)
E.4.9. Changes in MySQL Connector/NET Version 5.0.4 (Not released)
E.4.10. Changes in MySQL Connector/NET Version 5.0.3 (05 January 2007)
E.4.11. Changes in MySQL Connector/NET Version 5.0.2 (06 November 2006)
E.4.12. Changes in MySQL Connector/NET Version 5.0.1 (01 October 2006)
E.4.13. Changes in MySQL Connector/NET Version 5.0.0 (08 August 2006)
E.4.14. Changes in MySQL Connector/NET Version 1.0.10 (Not yet released)
E.4.15. Changes in MySQL Connector/NET Version 1.0.9 (02 February 2007
E.4.16. Changes in MySQL Connector/NET Version 1.0.8 (20 October 2006)
E.4.17. Changes in MySQL Connector/NET Version 1.0.7 (21 November 2005)
E.4.18. Changes in MySQL Connector/NET Version 1.0.6 (03 October 2005)
E.4.19. Changes in MySQL Connector/NET Version 1.0.5 (29 August 2005)
E.4.20. Changes in MySQL Connector/NET Version 1.0.4 (20 January 2005)
E.4.21. Changes in MySQL Connector/NET Version 1.0.3-gamma (12 October 2004)
E.4.22. Changes in MySQL Connector/NET Version 1.0.2-gamma (15 November 2004)
E.4.23. Changes in MySQL Connector/NET Version 1.0.1-beta2 (27 October 2004)
E.4.24. Changes in MySQL Connector/NET Version 1.0.0 (01 September 2004)
E.4.25. Changes in MySQL Connector/NET Version 0.9.0 (30 August 2004)
E.4.26. Changes in MySQL Connector/NET Version 0.76
E.4.27. Changes in MySQL Connector/NET Version 0.75
E.4.28. Changes in MySQL Connector/NET Version 0.74
E.4.29. Changes in MySQL Connector/NET Version 0.71
E.4.30. Changes in MySQL Connector/NET Version 0.70
E.4.31. Changes in MySQL Connector/NET Version 0.68
E.4.32. Changes in MySQL Connector/NET Version 0.65
E.4.33. Changes in MySQL Connector/NET Version 0.60
E.4.34. Changes in MySQL Connector/NET Version 0.50
E.5. MySQL Visual Studio Plugin Change History
E.5.1. Changes in MySQL Visual Studio Plugin 1.1.3 (Not yet released)
E.5.2. Changes in MySQL Visual Studio Plugin 1.0.2 (Not yet released)
E.5.3. Changes in MySQL Visual Studio Plugin 1.0.1 (4 October 2006)
E.5.4. Changes in MySQL Visual Studio Plugin 1.0.0 (4 October 2006)
E.6. MySQL Connector/J Change History
E.6.1. Changes in MySQL Connector/J 5.1.x
E.6.2. Changes in MySQL Connector/J 5.0.x
E.6.3. Changes in MySQL Connector/J 3.1.x
E.6.4. Changes in MySQL Connector/J 3.0.x
E.6.5. Changes in MySQL Connector/J 2.0.x
E.6.6. Changes in MySQL Connector/J 1.2b (04 July 1999)
E.6.7. Changes in MySQL Connector/J 1.2.x and lower
E.7. MySQL Connector/MXJ Change History
E.7.1. Changes in MySQL Connector/MXJ 5.0.6 (04 May 2007)
E.7.2. Changes in MySQL Connector/MXJ 5.0.5 (14 March 2007)
E.7.3. Changes in MySQL Connector/MXJ 5.0.4 (28 January 2007)
E.7.4. Changes in MySQL Connector/MXJ 5.0.3 (24 June 2006)
E.7.5. Changes in MySQL Connector/MXJ 5.0.2 (15 June 2006)
E.7.6. Changes in MySQL Connector/MXJ 5.0.1 (Never released)
E.7.7. Changes in MySQL Connector/MXJ 5.0.0 (09 December 2005)


This appendix lists the changes from version to version in the MySQL 5.0 source code through MySQL 5.0.26. For changes made to versions following 5.0.26, see Appendix C, MySQL Enterprise Release Notes, and Appendix D, MySQL Community Server Enhancements and Release Notes.

Starting with MySQL 5.0, we began offering a new version of the Manual for each new series of MySQL releases (5.0, 5.1, and so on). For information about changes in previous release series of the MySQL database software, see the corresponding version of this Manual. For information about legacy versions of the MySQL software through the 4.1 series, see MySQL 3.23, 4.0, 4.1 Reference Manual.

We update this section as we add new features in the 5.0 series, so that everybody can follow the development process.

Note that we tend to update the manual at the same time we make changes to MySQL. If you find a recent version of MySQL listed here that you can't find on our download page (, it means that the version has not yet been released.

The date mentioned with a release version is the date of the last BitKeeper ChangeSet on which the release was based, not the date when the packages were made available. The binaries are usually made available a few days after the date of the tagged ChangeSet, because building and testing all packages takes some time.

The manual included in the source and binary distributions may not be fully accurate when it comes to the release changelog entries, because the integration of the manual happens at build time. For the most up-to-date release changelog, please refer to the online version instead.

E.1. Changes in release 5.0.x (Production)

The following changelog shows what has been done in the 5.0 tree:

  • Basic support for read-only server side cursors. For information about using cursors within stored routines, see Section 17.2.9, “Cursors”. For information about using cursors from within the C API, see Section, “mysql_stmt_attr_set().

  • Basic support for (updatable) views. See, for example, Section 19.2, “CREATE VIEW Syntax”.

  • Basic support for stored procedures and functions (SQL:2003 style). See Chapter 17, Stored Procedures and Functions.

  • Initial support for rudimentary triggers.

  • Added SELECT INTO list_of_vars, which can be of mixed (that is, global and local) types. See Section, “SELECT ... INTO Statement”.

  • Removed the update log. It is fully replaced by the binary log. If the MySQL server is started with --log-update, it is translated to --log-bin (or ignored if the server is explicitly started with --log-bin), and a warning message is written to the error log. Setting SQL_LOG_UPDATE silently sets SQL_LOG_BIN instead (or do nothing if the server is explicitly started with --log-bin).

  • Support for the ISAM storage engine has been removed. If you have ISAM tables, you should convert them before upgrading. See Section, “Upgrading from MySQL 4.1 to 5.0”.

  • Support for RAID options in MyISAM tables has been removed. If you have tables that use these options, you should convert them before upgrading. See Section, “Upgrading from MySQL 4.1 to 5.0”.

  • User variable names are now case insensitive: If you do SET @a=10; then SELECT @A; now returns 10. Case sensitivity of a variable's value depends on the collation of the value.

  • Strict mode, which in essence means that you get an error instead of a warning when inserting an incorrect value into a column. See Section 5.2.6, “SQL Modes”.

  • VARCHAR and VARBINARY columns remember end space. A VARCHAR() or VARBINARY column can contain up to 65,535 characters or bytes, respectively.

  • MEMORY (HEAP) tables can have VARCHAR columns.

  • When using a constant string or a function that generates a string result in CREATE ... SELECT, MySQL creates the result column based on the maximum length of the string or expression:

    Maximum LengthData type
    = 0CHAR(0)
    < 512VARCHAR(max_length)
    >= 512TEXT
  • A fixed-point math library is introduced that supports precision math, resulting in more accurate results when working with the DECIMAL and NUMERIC data types. For details, see Chapter 21, Precision Math.

For a full list of changes, please refer to the changelog sections for each individual 5.0.x release.

E.1.1. Changes for release 5.0.27 and up

Beginning with MySQL 5.0.27, change notes are listed separately for MySQL Enterprise and MySQL Community Server. See Appendix C, MySQL Enterprise Release Notes, and Appendix D, MySQL Community Server Enhancements and Release Notes.

E.1.2. Changes in release 5.0.26 (03 October 2006)

This is a bugfix release for the current production release family.

This section documents all changes and bug fixes that have been applied since the last official MySQL release. If you would like to receive more fine-grained and personalized update alerts about fixes that are relevant to the version and features you use, please consider subscribing to MySQL Enterprise (a commercial MySQL offering). For more details please see

Functionality added or changed:

  • The output generated by the server when using the --xml option has changed with regard to null values. It now matches the output from mysqldump --xml. That is, a column containing a NULL value is now reported as

    <field name="column_name" xsi:nil="true" />

    whereas a column containing the string value 'NULL' is reported as

    <field name="column_name">NULL</field>

    and a column containing an empty string is reported as

    <field name="column_name">>/field>


  • The source distribution has been updated so that the UDF example can be compiled under Windows with CMake. See Section, “Compiling and Installing User-Defined Functions”. (Bug#19121)

  • The LOAD DATA FROM MASTER and LOAD TABLE FROM MASTER statements are deprecated. See Section, “LOAD DATA FROM MASTER Syntax”, for recommended alternatives. (Bug#18822, Bug#9125, Bug#12187, Bug#14399, Bug#15025, Bug#20596)

  • LOAD DATA INFILE no longer causes an implicit commit for all storage engines. It now causes an implicit commit only for tables using the NDB storage engine. (Bug#11151)

  • mysqldump now has a --flush-privileges option. It causes mysqldump to emit a FLUSH PRIVILEGES statement after dumping the mysql database. This option should be used any time the dump contains the mysql database and any other database that depends on the data in the mysql database for proper restoration. (Bug#21424)

  • The number of InnoDB threads is no longer limited to 1,000 on Windows. (Bug#22268)

Bugs fixed:

  • Deleting entries from a large MyISAM index could cause index corruption when it needed to shrink. Deletes from an index can happen when a record is deleted, when a key changes and must be moved, and when a key must be un-inserted because of a duplicate key. This can also happen in REPAIR TABLE when a duplicate key is found and in myisamchk when sorting the records by an index. (Bug#22384)

  • mysql_config --libmysqld-libs did not produce any SSL options necessary for linking libmysqld with SSL support enabled. (Bug#21239)

  • The parser rejected queries that selected from a table twice using a UNION within a subquery. The parser now supports arbitrary subquery, join, and parenthesis operations within EXISTS subqueries. A limitation still exists for scalar subqueries: If the subquery contains UNION, the first SELECT of the UNION cannot be within parentheses. For example, SELECT (SELECT a FROM t1 UNION SELECT b FROM t2) will work, but SELECT ((SELECT a FROM t1) UNION (SELECT b FROM t2)) will not. (Bug#14654)

  • Subqueries with aggregate functions but no FROM clause could return incorrect results. (Bug#21540)

  • The presence of a subquery in the ON clause of a join in a view definition prevented the MERGE algorithm from being used for the view in cases where it should be allowed. (Bug#21646)

  • Conversion of values inserted into a BIT column could affect adjacent columns. (Bug#22271)

  • The URL into the online manual that is printed in the stack trace message by the server was out of date. (Bug#21449)

  • PROCEDURE ANALYSE() returned incorrect values of M FLOAT(M, D) and DOUBLE(M, D). (Bug#20305)

  • Join conditions using index prefixes on utf8 columns of InnoDB tables incorrectly ignored rows where the length of the actual value was greater than the length of the index prefix. (Bug#19960)

  • On an INSERT into an updatable but non-insertable view, an error message was issued stating that the view was not updatable. Now the message says the view is not insertable-into. (Bug#5505)

  • INSERT DELAYED did not honor SET INSERT_ID or the auto_increment_* system variables. (Bug#20627, Bug#20830)

  • For character sets having a mbmaxlen value of 2, any ALTER TABLE statement changed TEXT columns to MEDIUMTEXT. (Bug#21620)

  • A query that used GROUP BY and an ALL or ANY quantified subquery in a HAVING clause could trigger an assertion failure. (Bug#21853)

  • For an ENUM column that used the ucs2 character set, using ALTER TABLE to modify the column definition caused the default value to be lost. (Bug#20108)

  • mysql_com.h unnecessarily referred to the ulong type. (Bug#22227)

  • Incorporated some portability fixes into the definition of __attribute__ in my_global.h. (Bug#2717)

  • Linking the pthreads library to single-threaded MySQL libraries caused dlopen() to fail at runtime on HP-UX. (Bug#18267)

  • In the package of pre-built time zone tables that is available for download at, the tables now explicitly use the utf8 character set so that they work the same way regardless of the system character set value. (Bug#21208)

  • The build process incorrectly tried to overwrite sql/lex_hash.h. This caused the build to fail when using a shadow link tree pointing to original sources that were owned by another account. (Bug#18888)

  • mysql_ftdump produced bad counts for common words. (Bug#22326)

  • yaSSL had a conflicting definition for socklen_t on hurd-i386 systems. (Bug#22326)

  • When records are merged from the insert buffer and the page needs to be reorganized, InnoDB used incorrect column length information when interpreting the records of the page. This caused a server crash due to apparent corruption of secondary indexes in ROW_FORMAT=COMPACT that contain prefix indexes of fixed-length columns. Data files should not be corrupted, but the crash was likely to repeat every time the server was restarted. (Bug#21638)

  • Using GROUP_CONCAT() on the result of a subquery in the FROM clause that itself used GROUP_CONCAT() could cause a server crash. (Bug#22015)

  • Execution of a prepared statement that uses an IN subquery with aggregate functions in the HAVING clause could cause a server crash. (Bug#22085)

  • The value of LAST_INSERT_ID() was not always updated correctly within stored routines. (Bug#21726)

  • If mysqld was linked against a system-installed zlib library compiled without large-file support, it would likely exit with a SIGXFSZ (file size exceeded) signal if an ARCHIVE table reached 2GB. The server now checks for space before writing. (Bug#21675)

  • Selecting from a MERGE table could result in a server crash if the underlying tables had fewer indexes than the MERGE table itself. (Bug#21617, Bug#22937)

  • make install tried to build files that should already have been built by make all, causing a failure if installation was performed using a different account than the one used for the initial build. (Bug#19738)

  • The source distribution would not build on Windows due to a spurious dependency on ib_config.h. (Bug#22224)

  • The server returns a more informative error message when it attempts to open a MERGE table that has been defined to use non-MyISAM tables. (Bug#10974)

  • Within stored routines, some error messages were printed incorrectly. A non-null-terminated string was passed to a message-printing routine that expected a null-terminated string. (Bug#20778)

  • SUBSTR() results sometimes were stored improperly into a temporary table when multi-byte character sets were used. (Bug#20204)

  • On Windows, inserting into a MERGE table after renaming an underlying MyISAM table caused a server crash. (Bug#20789)

  • On Mac OS X, zero-byte read() or write() calls to an SMB-mounted filesystem could return a non-standard return value, leading to data corruption. Now such calls are avoided. (Bug#12620)

  • With TRADITIONAL SQL mode, assignment of out-of-bound values and rounding of assigned values was done correctly, but assignment of the same numbers represented as strings sometimes was handled differently. (Bug#6147)

  • The source distribution failed to compile when configured with the --without-geometry option. (Bug#12991)

  • The source distribution failed to compile when configured with the --with-libwrap option. (Bug#18246)

  • For INSERT ... ON DUPLICATE KEY UPDATE, use of VALUES(col_name) within the UPDATE clause sometimes was handled incorrectly. (Bug#21555)

  • Row equalities (such as WHERE (a,b) = (c,d) were not taken into account by the optimizer, resulting in slow query execution. Now they are treated as conjunctions of equalities between row elements. (Bug#16081)

  • Column names supplied for a view created on a master server could be lost on a slave server. (Bug#19419)

  • For a MyISAM table locked with LOCK TABLES ...WRITE, queries optimized using the index_merge method did not show rows inserted with the lock in place. (Bug#20256)

  • Table aliases in multiple-table DELETE statements sometimes were not resolved. (Bug#21392)

  • A function result in a comparison was replaced with a constant by the optimizer under some circumstances when this optimization was invalid. (Bug#21698)

  • A subquery that uses an index for both the WHERE and ORDER BY clauses produced an empty result. (Bug#21180)

  • If the auto_increment_offset setting causes MySQL to generate a value larger than the column's maximum possible value, the INSERT statement is accepted in strict SQL mode, whereas but should fail with an error. (Bug#20573)

  • Queries containing a subquery that used aggregate functions could return incorrect results. (Bug#16792)

  • EXPLAIN sometimes returned an incorrect select_type for a SELECT from a view, compared to the select_type for the equivalent SELECT from the base table. (Bug#5500)

  • For a MyISAM table with a FULLTEXT index, compression with myisampack or a check with myisamchk after compression resulted in table corruption. (Bug#19702)

  • BIN(), OCT(), and CONV() did not work with BIT values. (Bug#15583)

  • The server could crash for the second execution of a function containing a SELECT statement that uses an aggregating IN subquery. (Bug#21493)

  • UPGRADE was treated as a reserved word, although it is not. (Bug#21772)

  • mysql_upgrade produced a malformed upgrade_defaults file by overwriting the [client] group header with a password option. This prevented mysqlcheck from running successfully when invoked by mysql_upgrade. (Bug#21011)

  • Usernames have a maximum length of 16 characters (even if they contain multi-byte characters), but were being truncated to 16 bytes. (Bug#20393)

  • mysql displayed an empty string for NULL values. (Bug#21618)

E.1.3. Changes in release 5.0.25 (15 September 2006)

This is a bugfix release for the current production release family. This version was released as MySQL Classic 5.0.25 to commercial customers only.

This section documents all changes and bug fixes that have been applied since the last official MySQL release. If you would like to receive more fine-grained and personalized update alerts about fixes that are relevant to the version and features you use, please consider subscribing to MySQL Enterprise (a commercial MySQL offering). For more details please see

Functionality added or changed:

  • For the mysql client, typing Control-C causes mysql to attempt to kill the current statement. If this cannot be done, or Control-C is typed again before the statement is killed, mysql exits. Previously, Control-C caused mysql to exit in all cases. (Bug#17926; see also Bug#1989)

  • For mysqlshow, if a database name argument contains wildcard characters (such as ‘_’) but matches a single database name exactly, treat the name as a literal name. This allows a command such as mysqlshow information_schema work without having to escape the wildcard character. (Bug#19147)

  • If a DROP VIEW statement named multiple views, it stopped with an error if a non-existent view was named and did not drop the remaining views. Now it continues on and reports an error at the end, similar to DROP TABLE. (Bug#16614)

  • Table comments longer than 60 characters and column comments longer than 255 characters were truncated silently. Now a warning is issued, or an error in strict mode. (Bug#13934)

  • The bundled yaSSL library was upgraded to version 1.3.7.

  • The bundled yaSSL library licensing has added a FLOSS exception similar to MySQL to resolve licensing incompatibilities with MySQL. (See the extra/yassl/FLOSS-EXCEPTIONS file in a MySQL source distribution for details.) (Bug#16755)

  • The server now issues a warning if it removes leading spaces from an alias. (Bug#10977)

  • The VIEW_DEFINITION column of the INFORMATION_SCHEMA VIEWS table now contains information about the view algorithm. (Bug#16832)

  • For a successful dump, mysqldump now writes a SQL comment to the end of the dump file in the following format:

    -- Dump completed on YYYY-MM-DD hh:mm:ss


  • The mysqld and mysqlmanager manpages have been reclassified from volume 1 to volume 8. (Bug#21220)

  • configure now defines the symbol DBUG_ON in config.h to indicate whether the source tree is configured to be compiled with debugging support. (Bug#19517)

  • The MySQL distribution now compiles on UnixWare 7.13. (Bug#20190)

  • The mysql client used the default character set if it automatically reconnected to the server, which is incorrect if the character set had been changed. To enable the character set to remain synchronized on the client and server, the mysql command charset (or \C) that changes the default character set and now also issues a SET NAMES statement. The changed character set is used for reconnects. (Bug#11972)

  • mysql_upgrade no longer reads the [client] option file group because it is not a client and did not understand client options such as host. Now it reads only the [mysql_upgrade] group. (Bug#19452)

  • MySQL now can do stack dumps on x86_64 and i386/NPTL systems. (Bug#21250)

  • TIMESTAMP columns that are NOT NULL now are reported that way by SHOW COLUMNS and INFORMATION_SCHEMA. (Bug#20910)

  • Using --with-debug to configure MySQL with debugging support enables you to use the --debug="d,parser_debug" option when you start the server. This causes the Bison parser that is used to process SQL statements to dump a parser trace to the server's standard error output. Typically, this output is written to the error log.

  • A new system variable, lc_time_names, specifies the locale that controls the language used to display day and month names and abbreviations. This variable affects the output from the DATE_FORMAT(), DAYNAME() and MONTHNAME() functions. See Section 5.10.9, “MySQL Server Locale Support”.

Bugs fixed:

  • Security fix: On Linux, and possibly other platforms using case-sensitive filesystems, it was possible for a user granted rights on a database to create or access a database whose name differed only from that of the first by the case of one or more letters. (CVE-2006-4226, Bug#17647)

  • Security fix: A stored routine created by one user and then made accessible to a different user using GRANT EXECUTE could be executed by that user with the privileges of the routine's definer. (CVE-2006-4227, Bug#18630)

  • Setting myisam_repair_threads caused any repair operation on a MyISAM table to fail to update the cardinality of indexes, instead making them always equal to 1. (Bug#18874)

  • The optimizer did not take advantage of indexes on columns used for the second or third arguments of BETWEEN. (Bug#18165)

  • Successive invocations of a COUNT(*) query containing a join on two MyISAM tables and a WHERE clause of the form WHERE (table1.column1 = table2.column2) OR table2.column2 IS NULL yielded different results. (Bug#21019)

  • CREATE TABLE ... SELECT statements that selected GEOMETRY values resulted in a table that contained BLOB columns, not GEOMETRY columns. (Bug#14807)

  • A DATE can be represented as an integer (such as 20060101) or as a string (such as '2006.01.01'). When a DATE (or TIME) column is compared in one SELECT against both representations, constant propagation by the optimizer led to comparison of DATE as a string against DATE as an integer. This could result in integer comparisons such as 2006 against 20060101, erroneously producing a false result. (Bug#21475)

  • A query result could be sorted improperly when using ORDER BY for the second table in a join. (Bug#21302)

  • EXPORT_SET() did not accept arguments with coercible character sets. (Bug#21531)

  • The --collation-server server option was being ignored. With the fix for this problem, if you choose a non-default character set with --character-set-server, you should also use --collation-server to specify the collation. (Bug#15276)

  • The index_merge/Intersection optimizer could have a memory overrrun when the number of table columns covered by an index is sufficiently large, possibly resulting in a server crash. (Bug#16201)

  • With max_sp_recursion set to 0, a stored procedure that executed a SHOW CREATE PROCEDURE statement for itself triggered a recursion limit exceeded error, though the statement involves no recursion. (Bug#21416)

  • The optimizer could produce an incorrect result after AND with collations such as latin1_german2_ci, utf8_czech_ci, and utf8_lithianian_ci. (Bug#9509)

  • Database and table names have a maximum length of 64 characters (even if they contain multi-byte characters), but were being truncated to 64 bytes. (Bug#21432) This patch was reverted in MySQL 5.0.26.

  • character_set_results can be NULL to signify “no conversion,” but some code did not check for NULL, resulting in a server crash. (Bug#21913)

  • InnoDB was slow with more than 100,000 .idb files. (Bug#21112)

  • SHOW INNODB STATUS contained some duplicate output. (Bug#21113)

  • Using cursors with READ COMMITTED isolation level could cause InnoDB to crash. (Bug#19834)

  • The ndb_mgm program was included in both the MySQL-ndb-tools and MySQL-ndb-management RPM packages, resulting in a conflict if both were installed. Now ndb_mgm is included only in MySQL-ndb-tools. (Bug#21058)

  • A query could produce different results with and without and index, if the WHERE clause contained a range condition that used an invalid DATETIME constant. (Bug#16249)

  • libmysqld produced some warnings to stderr which could not be silenced. These warnings now are suppressed. (Bug#13717)

  • If a query had a condition of the form tableX.key = tableY.key, which participated in equality propagation and also was used for ref access, then early ref-access NULL filtering was not peformed for the condition. This could make query execution slower. (Bug#19649)

  • The optimizer sometimes produced an incorrect row-count estimate after elimination of const tables. This resulted in choosing extremely inefficient execution plans in same cases when distribution of data in joins were skewed. (Bug#21390)

  • Query results could be incorrect if the WHERE clause contained t.key_part NOT IN (val_list), where val_list is a list of more than 1000 constants. (Bug#21282)

  • STR_TO_DATE() sometimes would return NULL if the %D format specifier was not the last specifier in the format string. (Bug#20987)

  • The myisam_stats_method variable was mishandled when set from an option file or on the command line. (Bug#21054)

  • The optimizer assumed that if (a=x AND b=x) is true, (a=x AND b=x) AND a=b is also true. But that is not always so if a and b have different data types. (Bug#21159)

  • InnoDB did not honor IGNORE INDEX, which prevented using IGNORE INDEX in cases where an index sort would be slower than a filesort. (Bug#21174) This patch was reverted in MySQL 5.0.26. Hint operation was revised further in MySQL 5.0.40.

  • If a column definition contained a character set declaration, but a DEFAULT value began with an introducer, the introducer character set was used as the column character set. (Bug#20695)

  • The MD5(), SHA1(), and ENCRYPT() functions should return a binary string, but the result sometimes was converted to the character set of the argument. MAKE_SET() and EXPORT_SET() now use the correct character set for their default separators, resulting in consistent result strings which can be coerced according to normal character set rules. (Bug#20536)

  • For connections that required a SUBJECT value, a check was performed to verify that the value was correct, but the connection was not refused if not. (Bug#20411)

  • Some Linux-x86_64-icc packages (of previous releases) mistakenly contained 32-bit binaries. Only ICC builds are affected, not gcc builds. Solaris and FreeBSD x86_64 builds are not affected. (Bug#22238)

  • INSERT ... SELECT sometimes generated a spurious Column count doesn't match value count error. (Bug#21774)

  • For TIME_FORMAT(), the %H and %k format specifiers can return values larger than two digits (if the hour is greater than 99), but for some query results that contained three-character hours, column values were truncated. (Bug#19844)

  • For table-format output, mysql did not always calculate columns widths correctly for columns containing multi-byte characters in the column name or contents. (Bug#17939)

  • Views could not be updated within a stored function or trigger. (Bug#17591)

  • Some user-level errors were being written to the server's error log, which is for server errors. (Bug#20402)

  • When using tables created under MySQL 4.1 with a 5.0 server, if the tables contained VARCHAR columns, for some queries the metadata sent to the client could have an empty column name. (Bug#14897)

  • On 64-bit systems, use of the cp1250 character set with a primary key column in a LIKE clause caused a server crash for patterns having letters in the range 128..255. (Bug#19741)

  • N'xxx' and _utf8'xxx' were not treated as equivalent because N'xxx' failed to unescape backslashes (\) and doubled apostrophe/single quote characters (''). (Bug#17313)

  • ORDER BY RAND() LIMIT 1 always set a user variable to the last possible value from the table. (Bug#16861)

  • A subquery in the WHERE clause of the outer query and using IN and GROUP BY returned an incorrect result. (Bug#16255)

  • When NOW() was used in a BETWEEN clause of the definition for a view, it was replaced with a constant in the view. (Bug#15950)

  • A stored procedure with a CONTINUE handler that encountered an error continued to execute a statement that caused an error, rather with the next statement following the one that caused the error. (Bug#8153)

  • libmysqlclient defined a symbol BN_bin2bn which belongs to OpenSSL. This could break applications that also linked against OpenSSL's libcrypto library. The fix required correcting an error in a build script that was failing to add rename macros for some functions. (Bug#21930)

  • COUNT(*) queries with ORDER BY and LIMIT could return the wrong result. (Bug#21787)

    Note: This problem was introduced by the fix for Bug#9676, which limited the rows stored in a temporary table to the LIMIT clause. This optimization is not applicable to non-group queries with aggregate functions. The current fix disables the optimization in such cases.

  • Memory overruns could occur for certain kinds of subqueries. (Bug#21477)

  • The SELECT privilege was required for an insert on a view, instead of the INSERT privilege. (Bug#21261)

    Note: This fixes a regression that was introduced by the fix for Bug#20989.

  • Running SHOW MASTER LOGS at the same time as binary log files were being switched would cause mysqld to hang. (Bug#21965)

  • A server or network failure with an open client connection would cause the client to hang even though the server was no longer available. (Bug#9678)

  • Inserts into BIT columns of FEDERATED tables did not work. (Bug#14532)

  • The yaSSL library bundled with libmysqlclient had some conflicts with OpenSSL. Now macros are used to rename the conflicting symbols to have a prefix of ya. (Bug#19810)

  • It is possible to create MERGE tables into which data cannot be inserted (by not specifying a UNION clause. However, when an insert was attempted, the error message was confusing. Now an error occurs indicating that the table is read-only. (Bug#17766)

  • A NUL byte within a prepared statement string caused the rest of the string not to be written to the query log, allowing logging to be bypassed. (Bug#21813)

  • mysql_upgrade created temporary files in a possibly insecure way. (Bug#21224)

  • Some prepared statements caused a server crash when executed a second time. (Bug#21166)

  • With query_cache_type set to 0, RESET QUERY CACHE was very slow and other threads were blocked during the operation. Now a cache reset is faster and non-blocking. (Bug#21051)

  • NDB Cluster: Setting TransactionDeadlockDetectionTimeout to a value greater than 12000 would cause scans to deadlock, time out, fail to release scan records, until the cluster ran out of scan records and stopped processing. (Bug#21800)

  • NDB Cluster: The server provided a non-descriptive error message when encountering a fatally corrupted REDO log. (Bug#21615)

  • NDB Cluster: A partial rollback could lead to node restart failures. (Bug#21536)

  • NDB Cluster: The failure of a unique index read due to an invalid schema version could be handled incorrectly in some cases, leading to unpredictable results. (Bug#21384)

  • NDB Cluster: In a cluster with more than 2 replicas, a manual restart of one of the data nodes could fail and cause the other nodes in its nodegroup to shut down. (Bug#21213)

  • NDB Cluster: When the redo buffer ran out of space, a Pointer too large error was raised and the cluster could become unusable until restarted with --initial. (Bug#20892)

  • NDB Cluster: In some situations with a high disk-load, writing of the redo log could hang, causing a crash with the error message GCP STOP detected. (Bug#20904)

  • NDB Cluster: A vague error message was returned when reading of both schema files occurred during a restart of the cluster. (Bug#20860)

  • NDB Cluster: The server did not honor the value set for ndb_cache_check_time in the my.cnf file. (Bug#20708)

  • NDB Cluster: The server failed with a non-descriptive error message when out of data memory. (Bug#18475)

  • NDB Cluster: and ndb_error_reporter were missing from RPM packages. (Bug#20426)

  • When DROP DATABASE or SHOW OPEN TABLES was issued while concurrently issuing DROP TABLE (or RENAME TABLE, CREATE TABLE LIKE or any other statement that required a name lock) in another connection, the server crashed. (Bug#21216)

  • Use of zero-length variable names caused a server crash. (Bug#20908)

  • Prepared statements caused general log and server memory corruption. (Bug#14346)

  • mysqldump incorrectly tried to use LOCK TABLES for tables in the INFORMATION_SCHEMA database. (Bug#21527)

  • Adding ORDER BY to a SELECT DISTINCT(expr) query could produce incorrect results. (Bug#21456)

  • For InnoDB tables, the server could crash when executing NOT IN () subqueries. (Bug#21077)

  • Use of the --prompt option or prompt command caused mysql to be unable to connect to the Instance Manager. (Bug#17485)

  • The server crashed if it tried to access a CSV table for which the data file had been removed. (Bug#15205)

  • CREATE USER did not respect the 16-character username limit. (Bug#10668)

  • On Windows, a definition for mysql_set_server_option() was missing from the C client library. (Bug#16513)

  • For the CSV storage engine, memory-mapped pages of the data file were not invalidated when new data was appended to the file via traditional (file descriptor-based) I/O primitives. (Bug#15669)

  • In debugging mode, mysqld printed server_init rather than network_init during network initialization. (Bug#20968)

  • For user-defined functions created with CREATE FUNCTION, the DEFINER clause is not legal, but no error was generated. (Bug#21269)

  • mysqld --flush failed to flush MyISAM table changes to disk following an UPDATE statement for which no updated column had an index. (Bug#20060)

  • When not running in strict mode, the server failed to convert the invalid years portion of a DATE or DATETIME value to '0000' when inserting it into a table. (Bug#19370)

    This patch was reverted in MySQL 5.0.42.

  • The --with-collation option was not honored for client connections. (Bug#7192)

  • Users who had the SHOW VIEW privilege for a view and privileges on one of the view's base table could not see records in INFORMATION_SCHEMA tables relating to the base table. (Bug#20543)

  • An issue with yaSSL prevented Connector/J clients from connecting to the server using a certificate. (Bug#19705)

  • Some server errors were not reported to the client, causing both to try to read from the connection until a hang or crash resulted. (Bug#16581)

  • When setting a column to its implicit default value as the result of inserting a NULL into a NOT NULL column as part of a multi-row insert or LOAD DATA operation, the server returned a misleading warning message. (Bug#14770)

  • DECIMAL columns were handled incorrectly in two respects (Bug#16172):

    1. When the precision of the column was too small for the value. In this case, the original value was returned instead of an error.

    2. When the scale of the column was set to 0. In this case, the value. In this case, the value was treated as though the scale had been defined as 2.

  • Tables created with the FEDERATED storage engine did not permit indexes using NULL columns. (Bug#15133)

  • The Instance Manager allowed STOP INSTANCE to be used on a server instance that was not running. (Bug#12673)

  • On Windows, mysql_upgrade.exe could not find mysqlcheck.exe. (Bug#20950)

  • FEDERATED tables raised invalid duplicate key errors when attempting on one server to insert rows having the same primary key values as rows that had been deleted from the linked table on the other server. (Bug#18764)

  • The C API failed to return a status message when invoking a stored procedure. (Bug#15752)

  • A stored procedure that created and invoked a prepared statement was not executed when called in a mysqld init-file. (Bug#17843)

  • Stored procedures did not use the character set defined for the database in which they were created. (Bug#16676)

  • CREATE PROCEDURE, CREATE FUNTION, CREATE TRIGGER, and CREATE VIEW statements containing multi-line comments (/* ... */) could not be replicated. (Bug#20438)

  • The final parenthesis of a CREATE INDEX statement occurring in a stored procedure was omitted from the binary log when the stored procedure was called. (Bug#19207)

  • Attempting to insert a string of greater than 4096 bytes into a FEDERATED table resulted in the error ERROR 1296 (HY000) at line 2: Got error 10000 'Error on remote system: 1054: Unknown column 'string-value' from FEDERATED. This error was raised regardless of the type of column involved (VARCHAR, TEXT, and so on.) (Bug#17608)

  • Performance during an import on a table with a trigger that called a stored procedure was severely degraded. This issue first arose in MySQL 5.0.18. (Bug#21013)

  • Repeated DROP TABLE statements in a stored procedure could sometimes cause the server to crash. (Bug#19399)

  • The value returned by a stored function returning a string value was not of the declared character set. (Bug#16211)

  • For mysql, escaping with backslash sometimes did not work. (Bug#20103)

  • Under certain circumstances, AVG(key_val) returned a value but MAX(key_val) returned an empty set due to incorrect application of MIN()/MAX() optimization. (Bug#20954)

  • Using aggregate functions in subqueries yielded incorrect results under certain circumstances due to incorrect application of MIN()/MAX() optimization. (Bug#20792)

  • A query using WHERE column = constant OR column IS NULL did not return consistent results on successive invocations. The column in each part of the WHERE clause could be either the same column, or two different columns, for the effect to be observed. (Bug#21019)

  • The PASSWORD() function returned invalid results when used in some UNION queries. (Bug#16881)

  • USE did not refresh database privileges when employed to re-select the current database. (Bug#10979)

  • A query using WHERE NOT (column < ANY (subquery)) yielded a different result from the same query using the same column and subquery with WHERE (column > ANY (subquery)). (Bug#20975)

  • A user variable set to a value selected from an unsigned column was stored as a signed value. (Bug#7498)

  • SELECT statements using GROUP BY against a view could have missing columns in the output when there was a trigger defined on one of the base tables for the view. (Bug#20466)

  • A SELECT with a subquery that was bound to the outer query over multiple columns returned different results when a constant was used instead of one of the dependant columns. (Bug#18925)

  • When performing a GROUP_CONCAT(), the server transformed BLOB columns VARCHAR columns, which could cause erroneous results when using Connector/J and possibly other MySQL APIs. (Bug#16712)

  • The type of the value returned by the VARIANCE() function varied according to the type of the input value. The function should always return a DOUBLE value. (Bug#10966)

  • Performing an INSERT on a view that was defined using a SELECT that specified a collation and a column alias caused the server to crash (Bug#21086).

  • A query of the form shown here caused the server to crash:

        t2 JOIN (
            t3 NATURAL JOIN t4,
            t5 NATURAL JOIN t6
        ON (t3.id3 = t2.id3 AND t5.id5 = t2.id5)


  • NDB Cluster (Direct APIs): Invoking the MGM API function ndb_mgm_listen_event() caused a memory leak. (Bug#21671)

  • NDB Cluster (Direct APIs): The MGM API function ndb_logevent_get_fd() was not actually implemented. (Bug#21129)

  • A memory leak was found when running ndb_mgm -e "SHOW". (Bug#21670)

  • NDB Cluster: Restarting a data node while DDL operations were in progress on the cluster could cause other data nodes to fail. This could also lead to mysqld hanging or crashing under some circumstances. (Bug#21017, Bug#21050)

  • NDB Cluster: An issue that arose from a patch for Bug#19852 made in MySQL 5.0.23 was corrected. (See Section E.1.6, “Changes in release 5.0.23 (Not released)”.)

  • NDB Cluster: The management client ALL STATUS command could sometimes report the status of some data nodes incorrectly. (Bug#13985)

  • NDB Cluster: Some queries involving joins on very large NDB tables could crash the MySQL server. (Bug#21059)

  • NDB Cluster: SELECT ... FOR UPDATE failed to lock the selected rows. (Bug#18184)

  • NDB Cluster: A Cluster whose storage nodes were installed from the MySQL-ndb-storage-* RPMs could not perform CREATE or ALTER operations that made use of non-default character sets or collations. (Bug#14918)

  • NDB Cluster: REPLACE statements did not work correctly on an NDB table having both a primary key and a unique key. In such cases, proper values were not set for columns which were not explicitly referenced in the statement. (Bug#20728)

  • NDB Cluster: Trying to create or drop a table while a node was restarting caused the node to crash. This is now handled by raising an error. (Bug#18781)

  • NDB Cluster: Running ndbd --nowait-nodes=id where id was the node ID of a node that was already running would fail with an invalid error message. (Bug#20419)

  • NDB Cluster: Incorrect values were inserted into AUTO_INCREMENT columns of tables restored from a cluster backup. (Bug#20820)

  • NDB Cluster: When attempting to restart the cluster following a data import, the cluster would fail during Phase 4 of the restart with Error 2334: Job buffer congestion. (Bug#20774)

  • NDB Cluster: A node failure during a scan could sometime cause the node to crash when restarting too quickly following the failure. (Bug#20197)

  • NDB Cluster: It was possible to use port numbers greater than 65535 for ServerPort in the config.ini file. (Bug#19164)

  • NDB Cluster: Under certain circumstances, a node that was shut down then restarted could hang during the restart. (Bug#18863)

  • NDB Cluster (Replication): In some cases, a large number of MySQL servers sending requests to the cluster simultaneously could cause the cluster to crash. This could also be triggered by many NDB API clients making simultaneous event subscriptions or unsubscriptions. (Bug#20683)

  • NDB Cluster (Direct APIs): NdbScanOperation::readTuples() and NdbIndexScanOperation::readTuples() ignored the batch parameter. (Bug#20252)

  • The implementation for UNCOMPRESS() did not indicate that it could return NULL, causing the optimizer to do the wrong thing. (Bug#18539)

  • TIMESTAMPDIFF() examined only the date and ignored the time when the requested difference unit was months or quarters. (Bug#16226)

  • perror did not properly report NDB error codes. (Bug#16561)

  • mysqlimport sends a set @@character_set_database=binary statement to the server, but this is not understood by pre-4.1 servers. Now mysqlimport encloses the statement within a /*!40101 ... */ comment so that old servers will ignore it. (Bug#15690)

  • The character set was not being properly initialized for CAST() with a type like CHAR(2) BINARY, which resulted in incorrect results or even a server crash. (Bug#17903)

  • For ODBC compatibility, MySQL supports use of WHERE col_name IS NULL for DATE or DATETIME columns that are NOT NULL, to allow column values of '0000-00-00' or '0000-00-00 00:00:00' to be selected. However, this was not working for WHERE clauses in DELETE statements. (Bug#8143)

  • The --master-data option for mysqldump requires certain privileges, but mysqldump generated a truncated dump file without producing an appropriate error message or exit status if the invoking user did not have those privileges. (Bug#21215)

  • ALTER VIEW did not retain existing values of attributes that had been originally specified but were not changed in the ALTER VIEW statement. (Bug#21080)

  • mysql crashed for very long arguments to the connect command. (Bug#21042)

  • perror crashed on Solaris due to NULL return value of strerror() system call. (Bug#20145)

  • The query command for mysqltest did not work. (Bug#19890)

  • For certain queries, the server incorrectly resolved a reference to an aggregate function and crashed. (Bug#20868)

  • When executing a SELECT with ORDER BY on a view that is constructed from a SELECT statement containing a stored function, the stored function was evaluated too many times. (Bug#19862)

  • Subqueries on INFORMATION_SCHEMA tables could erroneously return an empty result. (Bug#21231)

  • On 64-bit Windows, a missing table generated error 1017, not the correct value of 1146. (Bug#21396)

  • The same trigger error message was produced under two conditions: The trigger duplicated an existing trigger name, or the trigger duplicated an existing combination of action and event. Now different messages are produced for the two conditions so as to be more informative. (Bug#10946)

  • Multiplication of DECIMAL values could produce incorrect fractional part and trailing garbage caused by signed overflow. (Bug#20569)

  • A subquery that contained LIMIT N,1 could return more than one row. (Bug#20519)

  • DESCRIBE returned the type BIGINT for a column of a view if the column was specified by an expression over values of the type INT. (Bug#19714)

  • Multiple invocations of the REVERSE() function could return different results. (Bug#18243)

  • Using > ALL with subqueries that return no rows yielded incorrect results under certain circumstances due to incorrect application of MIN()/MAX() optimization. (Bug#18503)

  • Using ANY with “non-table” subqueries such as SELECT 1 yielded incorrect results under certain circumstances due to incorrect application of MIN()/MAX() optimization. (Bug#16302)

  • When a row was inserted through a view but did not specify a value for a column that had no default value in the base table, no warning or error occurred. Now a warning occurs, or an error in strict SQL mode. (Bug#16110)

  • The use of WHERE col_name IS NULL in SELECT statements reset the value of LAST_INSERT_ID() to zero. (Bug#14553)

  • The server crashed when using the range access method to execut a subquery with a ORDER BY DESC clause. (Bug#20869)

  • Use of the join cache in favor of an index for ORDER BY operations could cause incorrect result sorting. (Bug#17212)

  • A user-defined function that is called on each row of a returned result set, could receive an in_null state that is set, if it was set previously. Now, the is_null state is reset to false before each invocation of a UDF. (Bug#19904)

  • Referring to a stored function qualified with the name of one database and tables in another database caused a “table doesn't exist” error. (Bug#18444)

  • For NDB and possibly InnoDB tables, a BEFORE UPDATE trigger could insert incorrect values. (Bug#18437)

  • Triggers on tables in the mysql database caused a server crash. Triggers for tables in this database now are disallowed. (Bug#18361)

  • The length of the pattern string prefix for LIKE operations was calculated incorrectly for multi-byte character sets. As a result, the scanned range was wider than necessary if the prefix contained any multi-byte characters, and rows could be missing from the result set. (Bug#16674, Bug#18359)

  • For very complex SELECT statements could create temporary tables that were too big, but for which the temporary files did not get removed, causing subsequent queries to fail. (Bug#11824)

  • For spatial data types, the server formerly returned these as VARSTRING values with a binary collation. Now the server returns spatial values as BLOB values. (Bug#10166)

  • Using SELECT and a table join while running a concurrent INSERT operation would join incorrect rows. (Bug#14400)

  • Using SELECT on a corrupt MyISAM table using the dynamic record format could cause a server crash. (Bug#19835)

  • Using tables from MySQL 4.x in MySQL 5.x, in particular those with VARCHAR fields and using INSERT DELAYED to update data in the table would result in either data corruption or a server crash. (Bug#16611, Bug#16218, Bug#17294)

  • Checking a MyISAM table (using CHECK TABLE) having a spatial index and only one row would wrongly indicate that the table was corrupted. (Bug#17877)

  • SHOW GRANTS FOR CURRENT_USER did not return definer grants when executed in DEFINER context (such as within a stored prodedure defined with SQL SECURITY DEFINER), it returned the invoker grants. (Bug#15298)

  • For SELECT ... FOR UPDATE statements that used DISTINCT or GROUP BY over all key parts of a unique index (or primary key), the optimizer unnecessarily created a temporary table, thus losing the linkage to the underlying unique index values. This caused a Result set not updatable error. (The temporary table is unnecessary because under these circumstances the distinct or grouped columns must also be unique.) (Bug#16458)

  • The first time a user who had been granted the CREATE ROUTINE privilege used that privilege to create a stored function or procedure, the Password column in that user's row in the mysql.user table was set to NULL. (Bug#19857)

  • Creation of a view as a join of views or tables could fail if the views or tables are in different databases. (Bug#20482)

  • Use of MIN() or MAX() with GROUP BY on a ucs2 column could cause a server crash. (Bug#20076)

  • INSERT INTO ... SELECT ... LIMIT 1 could be slow because the LIMIT was ignored when selecting candidate rows. (Bug#9676)

  • Certain queries having a WHERE clause that included conditions on multi-part keys with more than 2 key parts could produce incorrect results and send [Note] Use_count: Wrong count for key at... messages to STDERR. (Bug#16168)

  • The mysql_list_fields() C API function returned the incorrect table name for views. (Bug#19671)

  • A cast problem caused incorrect results for prepared statements that returned float values when MySQL was compiled with gcc 4.0. (Bug#19694)

  • Updating a column of a FEDERATED table to NULL sometimes failed. (Bug#16494)

E.1.4. Changes in release 5.0.24a (25 August 2006)

This is a bugfix release for the current production release family. It replaces MySQL 5.0.24.

Changes from 5.0.24 to 5.0.24a:

  • MySQL 5.0.24 introduced an ABI incompatibility, which this release reverts. Programs compiled against 5.0.24 are not compatible with any other version and must be recompiled. (Bug#21543)

  • Closing of temporary tables failed if binary logging was not enabled. (Bug#20919)

  • For statements that have a DEFINER clause such as CREATE TRIGGER or CREATE VIEW, long usernames or hostnames could cause a buffer overflow. (Bug#16899)

  • Pathname separator and device characters were not correctly parameterized for NetWare, causing mysqld startup errors. (Bug#21537)

  • mysqld could crash when closing temporary tables. (Bug#21582)

In addition, the following problem affected the initial build of 5.0.24a, but has been corrected in the RPM files now available:

  • The shared compatibility RPM files were missing some files. (Bug#22251)

E.1.5. Changes in release 5.0.24 (27 July 2006)

This is a bugfix release for the current production release family.

This section documents all changes and bug fixes that have been applied since the last official MySQL release. If you would like to receive more fine-grained and personalized update alerts about fixes that are relevant to the version and features you use, please consider subscribing to MySQL Enterprise (a commercial MySQL offering). For more details please see

Functionality added or changed:

  • The LEFT() and RIGHT() functions return NULL if any argument is NULL. (Bug#11728)

  • In the INFORMATION_SCHEMA.ROUTINES table the ROUTINE_DEFINITION column now is defined as NULL rather than NOT NULL. Also, NULL rather than the empty string is returned as the column value if the user does not have sufficient privileges to see the routine definition. (Bug#20230)

Bugs fixed:

  • Security fix: If a user has access to MyISAM table t, that user can create a MERGE table m that accesses t. However, if the user's privileges on t are subsequently revoked, the user can continue to access t by doing so through m. If this behavior is undesirable, you can start the server with the new --skip-merge option to disable the MERGE storage engine. (Bug#15195)

  • Using the extended syntax for TRIM() — that is, TRIM(... FROM ...) — in a SELECT statement defining a view caused an invalid syntax error when selecting from the view. (Bug#17526)

  • Assignments of values to variables of type TEXT were handled incorrectly in stored routines. (Bug#17225)

  • NDB Cluster: The script did not account for TEXT and BLOB column values correctly. (Bug#21204)

  • NDB Cluster: The repeated creating and dropping of a table would eventually lead to NDB Error 826, Too many tables and attributes ... Insufficient space. (Bug#20847)

  • Issuing a SHOW CREATE FUNCTION or SHOW CREATE PROCEDURE statement without sufficient privileges could crash the mysql client. (Bug#20664)

  • In a view defined with SQL SECURITY DEFINER, the CURRENT_USER() function returned the invoker, not the definer. (Bug#20570)

  • DATE_ADD() and DATE_SUB() returned NULL when the result date was on the day '9999-12-31'. (Bug#12356)

  • For a DATE parameter sent via a MYSQL_TIME data structure, mysql_stmt_execute() zeroed the hour, minute, and second members of the structure rather than treating them as read-only. (Bug#20152)

  • The DATA DIRECTORY table option did not work for TEMPORARY tables. (Bug#8706)

  • With the auto_increment_increment system variable set larger than 1, if the next generated AUTO_INCREMENT value would be larger than the column's maximum value, the value would be clipped down to that maximum value and inserted, even if the resulting value would not be in the generated sequence. This could cause problems for master-master replication. Now the server clips the value down to the previous value in the sequence, which correctly produces a duplicate-key error if that value already exists in the column. (Bug#20524)

  • If a table on a slave server had a higher AUTO_INCREMENT counter than the corresponding master table (even though all rows of the two tables were identical), in some cases REPLACE or INSERT ... ON DUPLICATE KEY UPDATE would not replicate properly using statement-based logging. (Different values would be inserted on the master and slave.) (Bug#20188)

  • Under heavy load (executing more than 1024 simultaneous complex queries), a problem in the code that handles internal temporary tables could lead to writing beyond allocated space and memory corruption. Use of more than 1024 simultaneous cursors server wide also could lead to memory corruption. (This applies both to stored procedure and C API cursors.) (Bug#21206)

  • A race condition during slave server shutdown caused an assert failure. (Bug#20850)

  • mysqldump produced a malformed dump file when dumping multiple databases that contained views. (Bug#20221)

  • SELECT @@INSERT_ID displayed a value unrelated to a preceding SET INSERT_ID. (It was returning LAST_INSERT_ID instead.) (Bug#20392)

  • Performing INSERT ... SELECT ... JOIN ... USING without qualifying the column names caused ERROR 1052 "column 'x' in field list is ambiguous" even in cases where the column references were unambiguous. (Bug#18080)

  • Bug#10952 may cause inadvertent data loss. A fix for this bug was included in MySQL 5.0.23, but the approach used caused a loss of intended functionality. Because of this, that fix has been reverted in MySQL 5.0.24. As a consequence, the risk of inadvertent data loss still exists (see Bug#10952).

  • A SELECT that used a subquery in the FROM clause that did not select from a table failed when the subquery was used in a join. (Bug#21002)

  • REPLACE ... SELECT for a view required the INSERT privilege for tables other than the table being modified. (Bug#20989)

  • The mysql client did not understand help commands that had spaces at the end. (Bug#20328)

  • Failure to account for a NULL table pointer on big-endian machines could cause a server crash during type conversion. (Bug#21135)

  • mysqldump sometimes did not select the correct database before trying to dump views from it, resulting in an empty result set that caused mysqldump to die with a segmentation fault. (Bug#21014)

E.1.6. Changes in release 5.0.23 (Not released)

MySQL 5.0.23 was never officially released.

This section documents all changes and bug fixes that have been applied since the last official MySQL release. If you would like to receive more fine-grained and personalized update alerts about fixes that are relevant to the version and features you use, please consider subscribing to MySQL Enterprise (a commercial MySQL offering). For more details please see

Functionality added or changed:

  • NDB Cluster: The limit of 2048 ordered indexes per cluster has been lifted. There is now no upper limit on the number of ordered indexes (including AUTO_INCREMENT columns) that may be used. (Bug#14509)

  • NDB Cluster: The status variables Ndb_connected_host and Ndb_connected_port were renamed to Ndb_config_from_host and Ndb_config_from_port, respectively.

  • The mysql_upgrade command has been converted from a shell script to a C program, so it is available on non-Unix systems such as Windows. This program should be run for each MySQL upgrade. See Section 5.5.8, “mysql_upgrade — Check Tables for MySQL Upgrade”.

  • Binary distributions that include SSL support now are built using yaSSL when possible.

  • Added the --ssl-verify-server-cert option to MySQL client programs. This option causes the server's Common Name value in its certificate to be verified against the hostname used when connecting to the server, and the connection is rejected if there is a mismatch. Added MYSQL_OPT_SSL_VERIFY_SERVER_CERT option for the mysql_options() C API function to enable this verification. This feature can be used to prevent man-in-the-middle attacks. Verification is disabled by default. (Bug#17208)

  • Added the ssl_ca, ssl_capath, ssl_cert, ssl_cipher, and ssl_key system variables, which display the values given via the corresponding command options. See Section, “SSL Command Options”. (Bug#19606)

  • Added the log_queries_not_using_indexes system variable. (Bug#19616)

  • Added the --angel-pid-file option to mysqlmanager for specifying the file in which the angel process records its process ID when mysqlmanager runs in daemon mode. (Bug#14106)

  • The ONLY_FULL_GROUP_BY SQL mode now also applies to the HAVING clause. That is, columns not named in the GROUP BY clause cannot be used in the HAVING clause if not used in an aggregate function. (Bug#18739)

  • SQL syntax for prepared statements now supports ANALYZE TABLE, OPTIMIZE TABLE, and REPAIR TABLE. (Bug#19308)

  • The bundled yaSSL library was upgraded to version 1.3.5. This improves handling of certain problems with SSL-related command options. (Bug#17737)

  • Added the --set-charset option to mysqlbinlog to allow the character set to be specified for processing binary log files. (Bug#18351)

  • For a table with an AUTO_INCREMENT column, SHOW CREATE TABLE now shows the next AUTO_INCREMENT value to be generated. (Bug#19025)

  • It is now possible to use NEW.var_name values within triggers as INOUT parameters to stored procedures. (Bug#14635)

  • The mysqldumpslow script has been moved from client RPM packages to server RPM packages. This corrects a problem where mysqldumpslow could not be used with a client-only RPM install, because it depends on my_print_defaults which is in the server RPM. (Bug#20216)

  • The mysql_get_ssl_cipher() C API function was added.

Bugs fixed:

  • An invalid GRANT statement for which Ok was returned on a replication master caused an error on the slave and replication to fail. (Bug#6774)

  • Use of the --no-pager option caused mysql to crash. (Bug#19363)

  • mysqlcheck tried to check views instead of ignoring them. (Bug#16502)

  • Long multiple-row INSERT statements could take a very long time for some multi-byte character sets. (Bug#15811)

  • Re-executing a stored procedure with a complex stored procedure cursor query could lead to a server crash. (Bug#15217)

  • Views created from prepared statements inside of stored procedures were created with a definition that included both SQL_CACHE and SQL_NO_CACHE. (Bug#17203)

  • mysqldump did not dump the table name correctly for some table identifiers that contained unusual characters such as ‘:’. (Bug#19479)

  • mysqldump would not dump views that had become invalid because a table named in the view definition had been dropped. Instead, it quit with an error message. Now you can specify the --force option to cause mysqldump to keep going and write a SQL comment containing the view definition to the dump output. (Bug#17371)

  • The WITH CHECK OPTION was not enforced when a REPLACE statement was executed against a view. (Bug#19789)

  • The use of MIN() and MAX() on columns with an index prefix produced incorrect results in some queries. (Bug#18206)

  • Concatenating the results of multiple constant subselects produced incorrect results. (Bug#16716)

  • A Table ... doesn't exist error could occur for statements that called a function defined in another database. (Bug#17199)

  • A buffer overwrite error in Instance Manager caused a crash. (Bug#20622)

  • Re-execution of a prepared multiple-table DELETE statement that involves a trigger or stored function can result in a server crash. (Bug#19634)

  • On Windows, corrected a crash stemming from differences in Visual C runtime library routines from POSIX behavior regarding invalid file descriptors. (Bug#18275)

  • Multiple-table updates with FEDERATED tables could cause a server crash. (Bug#19773)

  • On Windows, terminating mysqld with Control-C could result in a crash during shutdown. (Bug#18235)

  • On Windows, removal of binary log files would fail if the files were already open. (Bug#19208)

  • mysqldump produced garbled output for view definitions. (Bug#18462)

  • The omission of leading zeros in dates could lead to erroneous results when these were compared with the output of certain date and time functions. (Bug#16377)

  • An invalid comparison between keys with index prefixes over multi-byte character fields could lead to incorrect result sets if the selected query execution plan used a range scan by an index prefix over a UTF8 character field. This also caused incorrect results under similar circumstances with many other character sets. (Bug#14896)

  • NDB Cluster: Cluster system status variables were not updated. (Bug#11459)

  • NDB Cluster: The cluster's data nodes would fail while trying to load data when NoOfFrangmentLogFiles was equal to 1. (Bug#19894)

  • NDB Cluster: A problem with error handling when ndb_use_exact_count was enabled could lead to incorrect values returned from queries using COUNT(). A warning is now returned in such cases. (Bug#19202)

  • NDB Cluster: Restoring a backup made using ndb_restore failed when the backup had been taken from a cluster whose data memory was full. (Bug#19852)

  • NDB Cluster: TEXT columns in Cluster tables having both an explicit primary key and a unique key were not correctly updated by REPLACE statements. (Bug#19906)

  • NDB Cluster: An internal formatting error caused some management client error messages to be unreadable. (Bug#20016)

  • NDB Cluster: Running management client commands while mgmd was in the process of disconnecting could cause the management server to fail. (Bug#19932)

  • NDB Cluster (NDBAPI): Update operations on blobs were not checked for illegal operations.

    Note: Read locks with blob update operations are now upgraded from read committed to read shared.

  • NDB Cluster: The management client ALL STOP command shut down mgmd processes (as well as ndbd processes). (Bug#18966)

  • NDB Cluster: LOAD DATA LOCAL failed to ignore duplicate keys in Cluster tables. (Bug#19496)

  • NDB Cluster: Repeated CREATE - INSERT - DROP operations tables could in some circumstances cause the MySQL table definition cache to become corrupt, so that some mysqld processes could access table information but others could not. (Bug#18595)

  • NDB Cluster: The mgm client command ALL CLUSTERLOG STATISTICS=15; had no effect. (Bug#20336)

  • NDB Cluster: TRUNCATE TABLE failed to reset the AUTO_INCREMENT counter. (Bug#18864)

  • NDB Cluster: The failure of a data node when preparing to commit a transaction (that is, while the node's status was CS_PREPARE_TO_COMMIT) could cause the failure of other cluster data nodes. (Bug#20185)

  • NDB Cluster: Renaming a table in such a way as to move it to a different database failed to move the table's indexes. (Bug#19967)

  • NDB Cluster: Resources for unique indexes on Cluster table columns were incorrectly allocated, so that only one-fourth as many unique indexes as indicated by the value of UniqueHashIndexes could be created. (Bug#19623)

  • NDB Cluster: Running ALL START in the NDB management client or restarting multiple nodes simultaneously could under some circumstances cause the cluster to crash. (Bug#19930)

  • NDB Cluster (NDBAPI): On big-endian platforms, NdbOperation::write_attr() did not update 32-bit fields correctly. (Bug#19537)

  • NDB Cluster: Some queries having a WHERE clause of the form c1=val1 OR c2 LIKE 'val2' were not evaluated correctly. (Bug # 17421)

  • NDB Cluster: Using “stalemysqld .FRM files could cause a newly-restored cluster to fail. This situation could arise when restarting a MySQL Cluster using the --intial option while leaving connected mysqld processes running. (Bug#16875)

  • NDB Cluster: Repeated use of the SHOW and ALL STATUS commands in the ndb_mgm client could cause the mgmd process to crash. (Bug#18591)

  • NDB Cluster: An issue with ndb_mgmd prevented more than 27 mysqld processes from connecting to a single cluster at one time. (Bug#17150)

  • NDB Cluster: Data node failures could cause excessive CPU usage by ndb_mgmd. (Bug#13987)

  • NDB Cluster: TRUNCATE failed on tables having BLOB or TEXT columns with the error Lock wait timeout exceeded. (Bug#19201)

  • NDB Cluster: Stopping multiple nodes could cause node failure handling not to be completed. (Bug#19039)

  • NDB Cluster: ndbd could sometimes fail to start with the error Node failure handling not completed following a graceful restart. (Bug#18550)

  • NDB Cluster: Backups could fail for large clusters with many tables, where the number of tables approached MaxNoOfTables. (Bug#17607)

  • On Windows, temporary tables containing ‘:’ in the name could not be created. (Bug#20616)

  • The --core-file-size option for mysqld_safe was effective only for root. (Bug#17353)

  • Some queries that used ORDER BY and LIMIT performed quickly in MySQL 3.23, but slowly in MySQL 4.x/5.x due to an optimizer problem. (Bug#4981)

  • mysql_upgrade was missing from binary MySQL distributions. (Bug#18516, Bug#20403)

  • Queries using an indexed column as the argument for the MIN() and MAX() functions following an ALTER TABLE .. DISABLE KEYS statement returned Got error 124 from storage engine until ALTER TABLE ... ENABLE KEYS was run on the table. (Bug#20357)

  • A number of dependency issues in the RPM bench and test packages caused installation of these packages to fail. (Bug#20078)

  • Nested natural joins worked executed correctly when executed as a non-prepared statement could fail with an Unknown column 'col_name' in 'field list' error when executed as a prepared statement, due to a name resolution problem. (Bug#15355)

  • GROUP BY on an expression that contained a cast to DECIMAL produced an incorrect result. (Bug#19667)

  • The max_length metadata value for columns created from CONCAT() could be incorrect when the collation of an argument differed from the collation of the CONCAT() itself. In some contexts such as UNION, this could lead to truncation of the column contents. (Bug#15962)

  • The MD5() and SHA() functions treat their arguments as case-sensitive strings. But when they are compared, their arguments were compared as case-insensitive strings, which leads to two function calls with different arguments (and thus different results) compared as being identical. This can lead to a wrong decision made in the range optimizer and thus to an incorrect result set. (Bug#15351)

  • For BOOLEAN mode full-text searches on non-indexed columns, NULL rows generated by a LEFT JOIN caused incorrect query results. (Bug#14708)

  • BIT columns in a table could cause joins that use the table to fail. (Bug#18895)

  • A UNION over more than 128 SELECT statements that use an aggregate function failed. (Bug#18175)

  • InnoDB unlocked its data directory before committing a transaction, potentially resulting in non-recoverable tables if a server crash occurred before the commit. (Bug#19727)

  • Multiple-table DELETE statements containing a subquery that selected from one of the tables being modified caused a server crash. (Bug#19225)

  • With settings of read_buffer_size >= 2G and read_rnd_buffer_size >=2G, LOAD DATA INFILE failed with no error message or caused a server crash for files larger than 2GB. (Bug#12982)

  • REPLACE statements caused activation of UPDATE triggers, not DELETE and INSERT triggers. (Bug#13479)

  • The thread for INSERT DELAYED rows was maintaining a separate AUTO_INCREMENT counter, resulting in incorrect values being assigned if DELAYED and non-DELAYED inserts were mixed. (Bug#20195)

  • mysqldump wrote an extra pair of DROP DATABASE and CREATE DATABASE statements if run with the --add-drop-database option and the database contained views. (Bug#17201)

  • On 64-bit Windows systems, REGEXP for regular expressions with exactly 31 characters did not work. (Bug#19407)

  • For mysqld, Valgrind revealed problems that were corrected: A dangling stack pointer being overwritten (Bug#20769); possible uninitialized data in a string comparison (Bug#20783); memory corruption in replication slaves when switching databases (Bug#19022); syscall write parameter pointing to uninitialized byte (Bug#20579).

  • For ndb_mgmd, Valgrind revealed problems that were corrected: A memory leak (Bug#19318); a dependency on an uninitialized variable (Bug#20333).

  • An update that used a join of a table to itself and modified the table on both sides of the join reported the table as crashed. (Bug#18036)

  • SSL connections using yaSSL on OpenBSD could fail. (Bug#19191)

  • On Windows, multiple clients simultaneously attempting to perform ALTER TABLE operations on an InnoDB table could deadlock. (Bug#17264)

  • The fill_help_tables.sql file did not load properly if the ANSI_QUOTES SQL mode was enabled. (Bug#20542)

  • The fill_help_tables.sql file did not contain a SET NAMES 'utf8' statement to indicate its encoding. This caused problems for some settings of the MySQL character set such as big5. (Bug#20551)

  • The MySQL server startup script /etc/init.d/mysql (created from mysql.server) is now marked to ensure that the system services ypbind, nscd, ldap, and NTP are started first (if these are configured on the machine). (Bug#18810)

  • MERGE tables did not work reliably with BIT columns. (Bug#19648)

  • For a reference to a non-existent index in FORCE INDEX, the error message referred to a column, not an index. (Bug#17873)

  • Some yaSSL public function names conflicted with those from OpenSSL, causing conflicts for applications that linked against both OpenSSL and a version of libmysqlclient that was built with yaSSL support. The yaSSL public functions now are renamed to avoid this conflict. (Bug#19575)

  • CHECK TABLE on a MyISAM table briefly cleared its AUTO_INCREMENT value, while holding only a read lock. Concurrent inserts to that table could use the wrong AUTO_INCREMENT value. CHECK TABLE no longer modifies the AUTO_INCREMENT value. (Bug#19604)

  • If there is a global read lock, CREATE DATABASE, RENAME DATABASE, and DROP DATABASE could deadlock. (Bug#19815)

  • On Linux, libmysqlclient when compiled with yaSSL using the icc compiler had a spurious dependency on C++ libraries. (Bug#20119)

  • Using CONCAT(@user_var, col_name), where col_name is a column in an INFORMATION_SCHEMA table, could cause erroneous duplication of data in the query result. (Bug#19599)

  • Results from INFORMATION_SCHEMA.SCHEMATA could contain uppercase information when lower_case_table_names was not 0. (Bug#17661)

  • Grant table modifications sometimes did not refresh the in-memory tables if the hostname was '' or not specified. (Bug#16297)

  • Invalid escape sequences in option files caused MySQL programs that read them to abort. (Bug#15328)

  • InnoDB did not increment the handler_read_prev counter. (Bug#19542)

  • Race conditions on certain platforms could cause the Instance Manager to fail to initialize. (Bug#19391)

  • ALTER TABLE on a table created prior to 5.0.3 would cause table corruption if the ALTER TABLE did one of the following:

    • Change the default value of a column.

    • Change the table comment.

    • Change the table password.


  • An ALTER TABLE operation that does not need to copy data, when executed on a table created prior to MySQL 4.0.25, could result in a server crash for subsequent accesses to the table. (Bug#19192)

  • The binary log lacked character set information for table name when dropping temporary tables. (Bug#14157)

  • A B-TREE index on a MEMORY table erroneously reported duplicate entry error for multiple NULL values. (Bug#12873)

  • Race conditions on certain platforms could cause the Instance Manager to try to restart the same instance multiple times. (Bug#18023)

  • A CREATE TABLE statement that created a table from a materialized view did not inherit default values from the underlying table. (Bug#19089)

  • The COM_STATISTICS command was changed in 5.0.3 to display session status variable values rather than global values. This causes mysqladmin status information not to be useful for the Slow queries and Opens values. Now COM_STATISTICS displays the global values for Slow queries and Opens. (Bug#18669)

  • INFORMATION_SCHEMA.TABLES provided inconsistent info about invalid views. This could cause server crashes or result in incorrect data being returned for queries that attempt to obtain information from INFORMATION_SCHEMA tables about views using stored functions. (Bug#18282)

  • Multiple calls to a stored procedure that selects from INFORMATION_SCHEMA could cause a server crash. (Bug#17204)

  • Premature optimization of nested subqueries in the FROM clause that refer to aggregate functions could lead to incorrect results. (Bug#19077)

  • A view definition that referred to an alias in the HAVING clause could be saved in the .frm file with the alias replaced by the expression that it referred to, causing failure of subsequent SELECT * FROM view_name statements. (Bug#19573)

  • Several aspects of view privileges were being checked incorrectly. (Bug#18681, Bug#20363)

  • A view with a non-existent account in the DEFINER clause caused SHOW CREATE VIEW to fail. Now SHOW CREATE VIEW issues a warning instead. (Bug#14875)

  • A compatibility issue with NPTL (Native POSIX Thread Library) on Linux could result in a deadlock with FLUSH TABLES WITH READ LOCK under some conditions. (Bug#20048)

  • MyISAM table deadlock was possible if one thread issued a LOCK TABLES request for write locks and then an administrative statement such as OPTIMIZE TABLE, if between the two statements another client meanwhile issued a multiple-table SELECT for some of the locked tables. (Bug#16986)

  • Subqueries that produced a BIGINT UNSIGNED value were being treated as returning a signed value. (Bug#19700)

  • The patch for Bug#17164 introduced the problem that some outer joins were incorrectly converted to inner joins. (Bug#19816)

  • BLOB or TEXT arguments to or values returned from stored functions were not copied properly if too long and could become garbled. (Bug#18587)

  • Selecting data from a MEMORY table with a VARCHAR column and a HASH index over it returned only the first row matched. (Bug#18233)

  • CREATE TABLE ... SELECT did not always produce the proper column default value in TRADITIONAL SQL mode. (Bug#17626)

  • Privilege checking on the contents of the INFORMATION_SCHEMA.VIEWS table was insufficiently restrictive. (Bug#16681)

  • The result from CONV() is a string, but was not always treated the same way as a string when converted to a real value for an arithmetic operation. (Bug#13975)

  • CREATE TABLE ... SELECT ... statements that used a stored function explicitly or implicitly (through a view) resulted in a Table not locked error. (Bug#12472, Bug#15137)

  • Within a trigger, SET used the SQL mode of the invoking statement, not the mode in effect at trigger creation time. (Bug#6951)

  • The server no longer uses a signal handler for signal 0 because it could cause a crash on some platforms. (Bug#15869)

  • Revised memory allocation for local objects within stored functions and triggers to avoid memory leak for repeated function or trigger invocation. (Bug#17260)

  • EXPLAIN ... SELECT INTO caused the client to hang. (Bug#15463)

  • Symlinking .mysql_history to /dev/null to suppress statement history saving by mysql did not work. (mysql deleted the symlink and recreated .mysql_history as a regular file, and then wrote history to it.) (Bug#16803)

  • The basedir and tmpdir system variables could not be accessed via @@var_name syntax. (Bug#1039)

  • For certain CREATE VIEW statements, the server did not detect invalid subqueries within the SELECT part. (Bug#7549)

  • The range operator failed and caused a server crash for clauses of the form tbl_name.unsigned_keypart NOT IN (negative_const, ...). (Bug#19618)

  • Returning the value of a system variable from a stored function caused a server crash. (Bug#18037)

  • Updates to a MEMORY table caused the size of BTREE indexes for the table to increase. (Bug#18160)

  • REPAIR TABLE did not restore the length for packed keys in tables created under MySQL 4.x, which caused them to appear corrupt to CHECK TABLE but not to REPAIR TABLE. (Bug#17810)

  • Selecting from a view that used GROUP BY on a non-constant temporal interval (such as DATE(col) + INTERVAL TIME_TO_SEC(col) SECOND could cause a server crash. (Bug#19490)

  • An outer join of two views that was written using { OJ ... } syntax could cause a server crash. (Bug#19396)

  • LOAD_FILE() returned an error if the file did not exist, rather than NULL as it should according to the manual. (Bug#10418)

  • For certain CREATE TABLE ... SELECT statements, the selected values were truncated when inserted into the new table. (Bug#17048)

  • Use of uninitialized user variables in a subquery in the FROM clause results in bad entries in the binary log. (Bug#19136)

  • In the INFORMATION_SCHEMA.COLUMNS table, the values for the CHARACTER_MAXIMUM_LENGTH and CHARACTER_OCTET_LENGTH columns were incorrect for multi-byte character sets. (Bug#19236)

  • An entry in the mysql.proc table with an empty routine name caused access to the INFORMATION_SCHEMA.ROUTINES table to crash the server. (Bug#18177)

  • A range access optimizer heuristic was invalid, causing some queries to be much slower in MySQL 5.0 than in 4.0. (Bug#17379, Bug#18940)

  • IS_USED_LOCK() could return an incorrect connection identifier. (Bug#16501)

  • mysql displayed NULL for strings that are empty or contain only spaces. (Bug#19564)

  • Concurrent reading and writing of privilege structures could crash the server. (Bug#16372)

  • A NUL byte within a comment in a statement string caused the rest of the string not to be written to the query log, allowing logging to be bypassed. (CVE-2006-0903, Bug#17667)

  • started NDB even for test cases that didn't need it. (Bug#19083)

  • SELECT DISTINCT queries sometimes returned only the last row. (Bug#18068)

  • Use of CONVERT_TZ() in a stored function or trigger (or in a stored procedure called from a stored function or trigger) caused an error. (Bug#11081)

  • Some queries were slower in 5.0 than in 4.1 because some 4.1 cost-evaluation code had not been merged into 5.0. (Bug#14292)

  • Index prefixes for utf8 VARCHAR columns did not work for UPDATE statements. (Bug#19080)

  • InnoDB does not support SPATIAL indexes, but did not prevent creation of such an index. (Bug#15860)

  • The configuration information for building the embedded server on Windows was missing a file. (Bug#18455)

  • The parser leaked memory when its stack needed to be extended. (Bug#18930)

  • When myisamchk needed to rebuild a table, AUTO_INCREMENT information was lost. (Bug#10405)

  • LOAD DATA FROM MASTER would fail when trying to load the INFORMATION_SCHEMA database from the master, because the INFORMATION_SCHEMA system database would already exist on the slave. (Bug#18607)

  • The binary log would create an incorrect DROP query when creating temporary tables during replication. (Bug#17263)

  • The IN-to-EXISTS transformation was making a reference to a parse tree fragment that was left out of the parse tree. This caused problems with prepared statements. (Bug#18492)

  • In mysqltest, --sleep=0 had no effect. Now it correctly causes sleep commands in test case files to sleep for 0 seconds. (Bug#18312)

  • Attempting to set the default value of an ENUM or SET column to NULL caused a server crash. (Bug#19145)

  • The sql_notes and sql_warnings system variables were not always displayed correctly by SHOW VARIABLES (for example, they were displayed as ON after being set to OFF). (Bug#16195)

  • The sql_big_selects system variable was not displayed by SHOW VARIABLES. (Bug#17849)

  • The system_time_zone and version_* system variables could not be accessed via SELECT @@var_name syntax. (Bug#12792, Bug#15684)

  • Flushing the compression buffer (via FLUSH TABLE) no longer increases the size of an unmodified ARCHIVE table. (Bug#19204)

  • RPM packages had spurious dependencies on Perl modules and other programs. (Bug#13634)

  • SHOW CREATE TABLE did not display the AUTO_INCREMENT column attribute if the SQL mode was MYSQL323 or MYSQL40. This also affected mysqldump, which uses SHOW CREATE TABLE to get table definitions. (Bug#14515)

E.1.7. Changes in release 5.0.22 (24 May 2006)

This is a security fix release for the previous production release family.

This section documents all changes and bug fixes that have been applied since the last official MySQL release. If you would like to receive more fine-grained and personalized update alerts about fixes that are relevant to the version and features you use, please consider subscribing to MySQL Enterprise (a commercial MySQL offering). For more details please see

Bugs fixed:

  • Security fix: An SQL-injection security hole has been found in multi-byte encoding processing. The bug was in the server, incorrectly parsing the string escaped with the mysql_real_escape_string() C API function. (CVE-2006-2753, Bug#8378)

    This vulnerability was discovered and reported by Josh Berkus and Tom Lane as part of the inter-project security collaboration of the OSDB consortium. For more information about SQL injection, please see the following text.

    Discussion: An SQL-injection security hole has been found in multi-byte encoding processing. An SQL-injection security hole can include a situation whereby when a user supplied data to be inserted into a database, the user might inject SQL statements into the data that the server will execute. With regards to this vulnerability, when character set unaware-escaping is used (for example, addslashes() in PHP), it is possible to bypass the escaping in some multi-byte character sets (for example, SJIS, BIG5 and GBK). As a result, a function such as addslashes() is not able to prevent SQL-injection attacks. It is impossible to fix this on the server side. The best solution is for applications to use character set-aware escaping offered by a function such mysql_real_escape_string().

    However, a bug was detected in how the MySQL server parses the output of mysql_real_escape_string(). As a result, even when the character set-aware function mysql_real_escape_string() was used, SQL injection was possible. This bug has been fixed.

    Workarounds: If you are unable to upgrade MySQL to a version that includes the fix for the bug in mysql_real_escape_string() parsing, but run MySQL 5.0.1 or higher, you can use the NO_BACKSLASH_ESCAPES SQL mode as a workaround. (This mode was introduced in MySQL 5.0.1.) NO_BACKSLASH_ESCAPES enables an SQL standard compatibility mode, where backslash is not considered a special character. The result will be that queries will fail.

    To set this mode for the current connection, enter the following SQL statement:


    You can also set the mode globally for all clients:


    This SQL mode also can be enabled automatically when the server starts by using the command-line option --sql-mode=NO_BACKSLASH_ESCAPES or by setting sql-mode=NO_BACKSLASH_ESCAPES in the server option file (for example, my.cnf or my.ini, depending on your system).

  • The dropping of a temporary table whose name contained a backtick ('`') character was not correctly written to the binary log, which also caused it not to be replicated correctly. (Bug#19188)

  • The patch for Bug#8303 broke the fix for Bug#8378 and was undone. (In string literals with an escape character (\) followed by a multi-byte character that has a second byte of (\), the literal was not interpreted correctly. The next byte now is escaped, not the entire multi-byte character. This means it a strict reverse of the mysql_real_escape_string() function.)

  • The client libraries had not been compiled for position-indpendent code on Solaris-SPARC and AMD x86_64 platforms. (Bug#13159, Bug#14202, Bug#18091)

  • Running myisampack followed by myisamchk with the --unpack option would corrupt the auto_increment key. (Bug#12633)

E.1.8. Changes in release 5.0.21 (02 May 2006)

This is a bugfix release for the current production release family.

This MySQL 5.0.21 release includes the patches for recently reported security vulnerabilites in the MySQL client-server protocol. We would like to thank Stefano Di Paola for finding and reporting these to us.

This section documents all changes and bug fixes that have been applied since the last official MySQL release. If you would like to receive more fine-grained and personalized update alerts about fixes that are relevant to the version and features you use, please consider subscribing to MySQL Enterprise (a commercial MySQL offering). For more details please see

Functionality added or changed:

  • Security enhancement: Added the global max_prepared_stmt_count system variable to limit the total number of prepared statements in the server. This limits the potential for denial-of-service attacks based on running the server out of memory by preparing huge numbers of statements. The current number of prepared statements is available through the prepared_stmt_count system variable. (Bug#16365)

  • The MySQL-shared-compat-5.0.X-.i386.rpm shared compatibility RPMs no longer contain libraries for MySQL 5.1. This avoids a conflict because the 5.0 and 5.1 libraries share the same soname number. It contains libraries for 3.23, 4.0, 4.1, and 5.0. (Bug#19288)

  • Creating a table in an InnoDB database with a column name that matched the name of an internal InnoDB column (including DB_ROW_ID, DB_TRX_ID, DB_ROLL_PTR and DB_MIX_ID) would cause a crash. MySQL now returns error 1005 (cannot create table) with errno set to -1. (Bug#18934)

  • NDB Cluster: It is now possible to perform a partial start of a cluster. That is, it is now possible to bring up the cluster without running ndbd --initial on all configured data nodes first. (Bug#18606)

  • NDB Cluster: A new --nowait-nodes startup option for ndbd makes it possible to “skip” specific nodes without waiting for them to start when starting the cluster. See Section, “Command Options for ndbd.

  • NDB Cluster: It is now possible to install MySQL with Cluster support to a non-default location and change the search path for font description files using either the --basedir or --character-sets-dir options. (Previously in MySQL 5.0, ndbd searched only the default path for character sets.)

  • In result set metadata, the MYSQL_FIELD.length value for BIT columns now is reported in number of bits. For example, the value for a BIT(9) column is 9. (Formerly, the value was related to number of bytes.) (Bug#13601)

  • The default for the innodb_thread_concurrency system variable was changed to 8. (Bug#15868)

Bugs fixed:

  • Security fix: A malicious client, using specially crafted invalid login or COM_TABLE_DUMP packets was able to read uninitialized memory, which potentially, though unlikely in MySQL, could have led to an information disclosure. (CVE-2006-1516, CVE-2006-1517) Thanks to Stefano Di Paola for finding and reporting this bug.

  • Security fix: A malicious client, using specially crafted invalid COM_TABLE_DUMP packets was able to trigger an exploitable buffer overflow on the server. (CVE-2006-1518) Thanks to Stefano Di Paola for finding and reporting this bug.

  • Security fix: Invalid arguments to DATE_FORMAT() caused a server crash. (CVE-2006-3469, Bug#20729) Thanks to Jean-David Maillefer for discovering and reporting this problem to the Debian project and to Christian Hammers from the Debian Team for notifying us of it.

  • NDB Cluster: A simultaneous DROP TABLE and table update operation utilising a table scan could trigger a node failure. (Bug#18597)

  • mysql-test-run could not be run as root. (Bug#17002)

  • MySQL-shared-compat-5.0.13-0.i386.rpm, MySQL-shared-compat-5.0.15-0.i386.rpm, MySQL-shared-compat-5.0.18-0.i386.rpm, MySQL-shared-compat-5.0.19-0.i386.rpm, MySQL-shared-compat-5.0.20-0.i386.rpm, and MySQL-shared-compat-5.0.20a-0.i386.rpm incorrectly depended on glibc 2.3 and could not be installed on a glibc 2.2 system. (Bug#16539)

  • IA-64 RPM packages for Red Hat and SuSE Linux that were built with the icc compiler incorrectly depended on icc runtime libraries. (Bug#16662)

  • After calling FLUSH STATUS, the max_used_connections variable did not increment for existing connections and connections which use the thread cache. (Bug#15933)

  • MySQL would not compile on Linux distributions that use the tinfo library. (Bug#18912)

  • Within a trigger, CONNECTION_ID() did not return the connection ID of the thread that caused the trigger to be activated. (Bug#16461)

  • The yaSSL library returned a cipher list in a manner incompatible with OpenSSL. (Bug#18399)

  • For single-SELECT union constructs of the form (SELECT ... ORDER BY order_list1 [LIMIT n]) ORDER BY order_list2, the ORDER BY lists were concatenated and the LIMIT clause was ignored. (Bug#18767)

  • CREATE VIEW statements would not be replicated to the slave if the --replicate-wild-ignore-table rule was enabled. (Bug#18715)

  • Index corruption could occur in cases when key_cache_block_size was not a multiple of myisam_block_size (for example, with key_cache_block_size=1536 and myisam_block_size=1024). (Bug#19079)

  • LAST_INSERT_ID() in a stored function or trigger returned zero. . (Bug#15728)

  • Use of CONVERT_TZ() in a view definition could result in spurious syntax or access errors. (Bug#15153)

  • UNCOMPRESS(NULL) could cause subsequent UNCOMPRESS() calls to return NULL for legal non-NULL arguments. (Bug#18643)

  • Conversion of a number to a CHAR UNICODE string returned an invalid result. (Bug#18691)

  • DELETE and UPDATE statements that used large NOT IN (value_list) clauses could use large amounts of memory. (Bug#15872)

  • Prevent recursive views caused by using RENAME TABLE on a view after creating it. (Bug#14308)

  • A LOCK TABLES statement that failed could cause MyISAM not to update table statistics properly, causing a subsequent CHECK TABLE to report table corruption. (Bug#18544)

  • For a reference to a non-existent stored function in a stored routine that had a CONTINUE handler, the server continued as though a useful result had been returned, possibly resulting in a server crash. (Bug#18787)

  • InnoDB did not use a consistent read for CREATE ... SELECT when innodb_locks_unsafe_for_binlog was set. (Bug#18350)

  • InnoDB could read a delete mark from its system tables incorrectly. (Bug#19217)

  • Corrected a syntax error in (Bug#19190)

  • A missing DBUG_RETURN() caused the server to emit a spurious error message: missing DBUG_RETURN or DBUG_VOID_RETURN macro in function "open_table". (Bug#18964)

  • DROP DATABASE did not drop stored routines associated with the database if the database name was longer than 21 characters. (Bug#18344)

  • Avoid trying to include <asm/atomic.h> when it doesn't work in C++ code. (Bug#13621)

  • Executing SELECT on a large table that had been compressed within myisampack could cause a crash. (Bug#17917)

  • NDB Cluster: When attempting to create an index on a BIT or BLOB column, Error 743: Unsupported character set in table or index was returned instead of Error 906: Unsupported attribute type in index.

  • Within stored routines, usernames were parsed incorrectly if they were enclosed within quotes. (Bug#13310)

  • Casting a string to DECIMAL worked, but casting a trimmed string (using LTRIM() or RTRIM()) resulted in loss of decimal digits. (Bug#17043)

  • NDB Cluster: On slow networks or CPUs, the management client SHOW command could sometimes erroneously show all data nodes as being master nodes belonging to nodegroup 0. (Bug#15530)

  • If the second or third argument to BETWEEN was a constant expression such as '2005-09-01 - INTERVAL 6 MONTH and the other two arguments were columns, BETWEEN was evaluated incorrectly. (Bug#18618)

  • If the first argument to BETWEEN was a DATE or TIME column of a view and the other arguments were constants, BETWEEN did not perform conversion of the constants to the appropriate temporary type, resulting in incorrect evaluation. (Bug#16069)

  • Server and clients ignored the --sysconfdir option that was passed to configure. (Bug#15069)

  • NDB Cluster: In a 2-node cluster with a node failure, restarting the node with a low value for StartPartialTimeout could cause the cluster to come up partitioned (“split-brain” issue). (Bug#16447)

    A similar issue could occur when the cluster was first started with a sufficiently low value for this parameter. (Bug#18612)

  • NDB Cluster: On systems with multiple network interfaces, data nodes would get “stuck” in startup phase 2 if the interface connecting them to the management server was working on node startup while the interface interconnecting the data nodes experienced a temporary outage. (Bug#15695)

  • NDB Cluster: Unused open handlers for tables in which the metadata had changed were not properly closed. This could result in stale results from Cluster tables following an ALTER TABLE. (Bug#13228)

  • NDB Cluster: Uninitialized internal variables could lead to unexpected results. (Bug#11033, Bug#11034)

  • For InnoDB tables, an expression of the form col_name BETWEEN col_name2 - INTERVAL x DAY AND col_name2 + INTERVAL x DAY when used in a join returned incorrect results. (Bug#14360)

  • INSERT DELAYED into a view caused an infinite loop. (Bug#13683)

  • Lettercase in database name qualifiers was not consistently handled properly in queries when lower_case_table_names was set to 1. (Bug#15917)

  • The optimizer could cause a server crash or use a non-optimal subset of indexes when evaluating whether to use Index Merge/Intersection variant of index_merge optimization. (Bug#19021)

  • The presence of multiple equalities in a condition after reading a constant table could cause the optimizer not to use an index. This resulted in certain queries being much slower than in MySQL 4.1. (Bug#16504)

  • A recent change caused the mysql client not to display NULL values correctly and to display numeric columns left-justified rather than right-justified. The problems have been corrected. (Bug#18265)

  • mysql_reconnect() sent a SET NAMES statement to the server, even for pre-4.1 servers that do not understand the statement. (Bug#18830)

  • COUNT(*) on a MyISAM table could return different results for the base table and a view on the base table. (Bug#18237)

  • DELETE with LEFT JOIN for InnoDB tables could crash the server if innodb_locks_unsafe_for_binlog was enabled. (Bug#15650)

  • InnoDB failure to release an adaptive hash index latch could cause a server crash if the query cache was enabled. (Bug#15758)

  • For mysql.server, if the basedir option was specified after datadir in an option file, the setting for datadir was ignored and assumed to be located under basedir. (Bug#16240)

  • The euro sign (Ђ) was not stored correctly in columns using the latin1_german1_ci or latin1_general_ci collation. (Bug#18321)

  • EXTRACT(QUARTER FROM date) returned unexpected results. (Bug#18100)

  • TRUNCATE did not reset the AUTO_INCREMENT counter for MyISAM tables when issued inside a stored procedure. (Bug#14945)

    Note: This bug did not affect InnoDB tables. Also, TRUNCATE does not reset the AUTO_INCREMENT counter for NDBCluster tables regardless of when it is called (see Bug#18864).

  • The server was always built as though --with-extra-charsets=complex had been specified. (Bug#12076)

  • A query using WHERE (column_1, column_2) IN ((value_1, value_2)[, (..., ...), ...]) would return incorrect results. (Bug#16248)

  • Queries of the form SELECT DISTINCT timestamp_column WHERE date_function(timestamp_col) = constant did not return all matching rows. (Bug#16710)

  • When running a query that contained a GROUP_CONCAT( SELECT GROUP_CONCAT(...) ), the result was NULL except in the ROLLUP part of the result, if there was one. (Bug#15560)

  • For tables created in a MySQL 4.1 installation upgraded to MySQL 5.0 and up, multiple-table updates could update only the first matching row. (Bug#16281)

  • NDB Cluster: When multiple node restarts were attempted without allowing each restart to complete, the error message returned was Array index out of bounds rather than Too many crashed replicas. (Bug#18349)

  • CAST(double AS SIGNED INT) for large double values outside the signed integer range truncates the result to be within range, but the result sometimes had the wrong sign, and no warning was generated. (Bug#15098)

  • Updating a field value when also requesting a lock with GET_LOCK() would cause slave servers in a replication environment to terminate. (Bug#17284)

E.1.9. Changes in release 5.0.20a (18 April 2006)

This is a bugfix release for the current production release family. It replaces MySQL 5.0.20.

Changes from 5.0.20 to 5.0.20a:

  • The fix for “Command line options are ignored for mysql client” (Bug#16855) has been revoked because it introduced an incompatible change in the way the mysql command-line client selects the server to connect to. In the worst case, this might have led to a client issuing commands to a server for which they were not intended, and this must not happen. To help all users in understanding this subject, Section 4.2, “Invoking MySQL Programs” now includes additional explanation of how command options with regard to host selection.

  • The code of the yaSSL library has been improved to avoid the dependency on a C++ runtime library, so a link with pure C applications is now possible on additional (but not yet all) platforms. We are working on fixing the remaining issues.

Additional information about SSL support:

  • With version 5.0.20a, SSL support is contained in all binaries for all Unix (including Linux) and Windows platforms except AIX, HP-UX, OpenServer 6, and the RPMs specific for RHAS3/RHAS4/SLES9 on Itanium CPUs (ia64); It is also not contained in those for Novell Netware. We are trying to add these platforms in future versions.

  • Please note that the original 5.0.20 announcement included inexact wording: SSL support is “included” in both server and client, but by default not “enabled”. SSL can be enabled by passing the SSL-related options (--ssl, --ssl-key=..., --ssl-cert=..., --ssl-ca=...) when starting the server and the client or by specifying these options in an option file. For more information, see Section 5.8.7, “Using Secure Connections”.

E.1.10. Changes in release 5.0.20 (31 March 2006)

Functionality added or changed:

  • Added the --sysdate-is-now option to mysqld to enable SYSDATE() to be treated as an alias for NOW(). See Section 12.6, “Date and Time Functions”. (Bug#15101)

  • InnoDB: The InnoDB storage engine now provides a descriptive error message if ibdata file information is omitted from my.cnf. (Bug#16827)

  • The NDBCluster storage engine now supports INSERT IGNORE and REPLACE statements. Previously, these statements failed with an error. (Bug#17431)

  • Builds for Windows, Linux, and Unix (except AIX) platforms now have SSL support enabled, in the server as well as in the client libraries. Because part of the SSL code is written in C++, this does introduce dependencies on the system's C++ runtime libraries in several cases, depending on compiler specifics. (Bug#18195)

  • The syntax for CREATE PROCEDURE and CREATE FUNCTION statements now includes a DEFINER clause. The DEFINER value specifies the security context to be used when checking access privileges at routine invocation time if the routine has the SQL SECURITY DEFINER characteristic. See Section 17.2.1, “CREATE PROCEDURE and CREATE FUNCTION Syntax”, for more information.

    When mysqldump is invoked with the --routines option, it now dumps the DEFINER value for stored routines.

  • Large file support added to build for QNX platform. (Bug#17336)

  • Large file support was re-enabled for the MySQL server binary for the AIX 5.2 platform. (Bug#13571)

Bugs fixed:

  • If the WHERE condition of a query contained an OR-ed FALSE term, the set of tables whose rows cannot serve for null-complements in outer joins was determined incorrectly. This resulted in blocking possible conversions of outer joins into joins by the optimizer for such queries. (Bug#17164)

  • mysql_config returned incorrect libraries on x86_64 systems. (Bug#13158)

  • Stored routine names longer than 64 characters were silently truncated. Now the limit is properly enforced and an error occurs. (Bug#17015)

  • During conversion from one character set to ucs2, multi-byte characters with no ucs2 equivalent were converted to multiple characters, rather than to 0x003F QUESTION MARK. (Bug#15375)

  • The mysql_close() C API function leaked handles for shared-memory connections on Windows. (Bug#15846)

  • Checks for permissions on database operations could be performed in a case-insensitive manner (a user with permissions on database MYDATABASE could by accident get permissions on database myDataBase), if the privilege data were still cached from a previous check. (Bug#17279)

  • If InnoDB ran out of buffer space for row locks and adaptive hashes, the server would crash. Now InnoDB rolls back the transaction. (Bug#18238)

  • InnoDB tables with an adaptive hash blocked other queries during CHECK TABLE statements while the entire hash was checked. This could be a long time for a large hash. (Bug#17126)

  • For InnoDB tables created in MySQL 4.1 or earlier, or created in 5.0 or later with compact format, updating a row so that a long column is updated or the length of some column changes, InnoDB later would fail to reclaim the BLOB storage space if the row was deleted. (Bug#18252)

  • InnoDB had a memory leak for duplicate-key errors with tables having 90 columns or more. (Bug#18384)

  • InnoDB: The LATEST FOREIGN KEY ERROR section in the output of SHOW INNODB STATUS was sometimes formatted incorrectly, causing problems with scripts that parsed the output of this statement. (Bug#16814)

  • When using ORDER BY with a non-string column inside GROUP_CONCAT() the result's character set was converted to binary. (Bug#18281)

    See also Bug#14169.

  • SELECT ... WHERE column LIKE 'A%', when column had a key and used the latin2_czech_cs collation, caused the wrong number of rows to be returned. (Bug#17374)

  • Complex queries with nested joins could cause a server crash. (Bug#18279)

  • The server could deadlock under heavy load while writing to the binary log. (Bug#18116)

  • A SELECT ... ORDER BY ... from a view defined using a function could crash the server. An example of such a view might be CREATE VIEW AS SELECT SQRT(c1) FROM t1. (Bug#18386)

  • A DELETE using a subquery could crash the server. (Bug#18306)

  • REPAIR TABLE, OPTIMIZE TABLE, and ALTER TABLE operations on transactional tables (or on tables of any type on Windows) could corrupt triggers associated with those tables. (Bug#18153)

  • MyISAM: Performing a bulk insert on a table referenced by a trigger would crash the table. (Bug#17764)

  • MyISAM: Keys for which the first part of the key was a CHAR or VARCHAR column using the UTF-8 character set and longer than 254 bytes could become corrupted. (Bug#17705)

  • Using ORDER BY intvar within a stored procedure (where intvar is an integer variable or expression) would crash the server. (Bug#16474)

    Note: The use of an integer i in an ORDER BY i clause for sorting the result by the ith column is deprecated (and non-standard). It should not be used in new applications. See Section 13.2.7, “SELECT Syntax”.

  • Triggers created in MySQL 5.0.16 and earlier could not be dropped after upgrading the server to 5.0.17 or later. (Bug#15921)

  • A SELECT using a function against a nested view would crash the server. (Bug#15683)

  • NDB Cluster: Certain queries using ORDER BY ... ASC in the WHERE clause could return incorrect results. (Bug#17729)

  • NDB Cluster: A timeout in the handling of an ABORT condition with more that 32 operations could yield a node failure. (Bug#18414)

  • NDB Cluster: A node restart immediately following a CREATE TABLE would fail. Important: This fix supports 2-node Clusters only. (Bug#18385)

  • NDB Cluster: In event of a node failure during a rollback, a “false” lock could be established on the backup for that node, which lock could not be removed without restarting the node. (Bug#18352)

  • NDB Cluster: The cluster created a crashed replica of a table having an ordered index — or when logging was not enabled, of a table having a table or unique index — leading to a crash of the cluster following 8 successibe restarts. (Bug#18298)

  • NDB Cluster: When replacing a failed master node, the replacement node could cause the cluster to crash from a buffer overflow if it had an excessively large amount of data to write to the cluster log. (Bug#18118)

  • NDB Cluster: If a mysql or other client could not parse the result set returned from a mysqld process acting as an SQL node in a cluster, the client would crash instead of returning the appropriate error. For example, this could happen when the client attempted to use a character set was not available to the mysqld. (Bug#17380)

  • NDB Cluster: Restarting nodes were allowed to start and join the cluster too early. (Bug#16772)

  • If a row was inserted inside a stored procedure using the parameters passed to the procedure in the INSERT statement, the resulting binlog entry was not escaped properly. (Bug#18293)

  • If InnoDB encountered a HA_ERR_LOCK_TABLE_FULL error and rolled-back a transaction, the transaction was still written to the binary log. (Bug#18283)

  • Stored procedures that call UDFs and pass local string variables caused server crashes. (Bug#17261)

  • Connecting to a server with a UCS2 default character set with a client using a non-UCS2 character set crashed the server. (Bug#18004)

  • Loading of UDFs in a statically linked MySQL caused a server crash. UDF loading is now blocked if the MySQL server is statically linked. (Bug#11835)

  • Views that incorporated tables from the INFORMATION_SCHEMA database resulted in a server crash when queried. (Bug#18224)

  • A SELECT * query on an INFORMATION_SCHEMA table by a user with limited privileges resulted in a server crash. (Bug#18113)

  • Attempting to access an InnoDB table after starting the server with --skip-innodb caused a server crash. (Bug#14575)

  • Replication slaves could not replicate triggers from older servers that included no DEFINER clause in the trigger definition. Now the trigger executes with the privileges of the invoker (which on the slave is the slave SQL thread). (Bug#16266)

  • Character set conversion of string constants for UNION of constant and table column was not done when it was safe to do so. (Bug#15949)

  • The DEFINER value for stored routines was not replicated. (Bug#15963)

  • Use of stored functions with DISTINCT or GROUP BY can produce incorrect results when ORDER BY is also used. (Bug#13575)

  • Use of TRUNCATE TABLE for a TEMPORARY table on a master server was propagated to slaves properly, but slaves did not decrement the Slave_open_temp_tables counter properly. (Bug#17137)

  • SELECT COUNT(*) for a MyISAM table could return different results depending on whether an index was used. (Bug#14980)

  • A LEFT JOIN with a UNION that selects literal values could crash the server. (Bug#17366)

  • Large file support did not work in AIX server binaries. (Bug#10776)

  • Updating a view that filters certain rows to set a filtered out row to be included in the table caused infinite loop. For example, if the view has a WHERE clause of salary > 100 then issuing an UPDATE statement of SET salary = 200 WHERE id = 10, caused an infinite loop. (Bug#17726)

  • Certain combinations of joins with mixed ON and USING clauses caused unknown column errors. (Bug#15229)

  • NDB Cluster: Inserting and deleting BLOB column values while a backup was in process could cause the loss of an ndbd node. (Bug#14028)

  • If the server was started with the --skip-grant-tables option, it was impossible to create a trigger or a view without explicitly specifying a DEFINER clause. (Bug#16777)

  • COUNT(DISTINCT col1, col2) and COUNT(DISTINCT CONCAT(col1, col2)) operations produced different results if one of the columns was an indexed DECIMAL column. (Bug#15745)

  • The server displayed garbage in the error message warning about bad assignments to DECIMAL columns or routine variables. (Bug#15480)

  • The server would execute stored routines that had a non-existent definer. (Bug#13198)

  • For FEDERATED tables, a SELECT statement with an ORDER BY clause did not return rows in the proper order. (Bug#17377)

  • The FORMAT() function returned an incorrect result when the client's character_set_connection value was utf8. (Bug#16678)

  • NDB Cluster: Some query cache statistics were not always correctly reported for Cluster tables. (Bug#16795)

  • Updating the value of a Unicode VARCHAR column with the result returned by a stored function would cause the insertion of ASCII characters into the column instead of Unicode, even where the function's return type was also declared as Unicode. (Bug#17615)

E.1.11. Changes in release 5.0.19 (04 March 2006)

Functionality added or changed:

  • Incompatible change: The InnoDB storage engine no longer ignores trailing spaces when comparing BINARY or VARBINARY column values. This means that (for example) the binary values 'a' and 'a ' are now regarded as unequal any time they are compared, as they are in MyISAM tables. (Bug#14189)

    See Section 11.4.2, “The BINARY and VARBINARY Types” for more information about the BINARY and VARBINARY types.

  • Several changes were made to make upgrades easier:

    • Added the mysql_upgrade program that checks all tables for incompatibilities with the current version of MySQL Server and repairs them if necessary. This program should be run for each MySQL upgrade (rather than mysql_fix_privilege_tables). See Section 5.5.8, “mysql_upgrade — Check Tables for MySQL Upgrade”.

    • Added the FOR UPGRADE option for the CHECK TABLE statement. This option checks whether tables are incompatible with the current version of MySQL Server.

    • Added the --check-upgrade to mysqlcheck that invokes CHECK TABLE with the FOR UPGRADE option.

  • NDB Cluster: The ndb_mgm client commands node_id START and node_id STOP now work with management nodes as well as data nodes. (However, using ALL for the node_id continues to affect all data nodes only.)

  • When using the GROUP_CONCAT() function where the group_concat_max_len system variable was greater than 512, the type of the result was BLOB only if the query included an ORDER BY clause; otherwise the result was a VARCHAR.

    The result type of the GROUP_CONCAT() function is now VARCHAR only if the value of the group_concat_max_len system variable is less than or equal to 512. Otherwise, this function returns a BLOB. (Bug#14169)

  • mysql no longer terminates data value display when it encounters a NUL byte. Instead, it displays NUL bytes as spaces. (Bug#16859)

  • Added the --wait-timeout option to mysqlmanager to allow configuration of the timeout for dropping an inactive connection, and increased the default timeout from 30 seconds to 28,800 seconds (8 hours). (Bug#12674, Bug#15980)

  • A number of performance issues were resolved that had previously been encountered when using statements that repeatedly invoked stored functions. For example, calling BENCHMARK() using a stored function executed much more slowly than when invoking it with inline code that accomplished the same task. In most cases the two should now execute with approximately the same speed. (Bug#15014, Bug#14946)

  • libmysqlclient now uses versioned symbols with GNU ld. (Bug#3074)

  • NDB Cluster: More descriptive warnings are now issued when inappropriate logging parameters are set in config.ini. (Formerly, the warning issued was simply Could not add logfile destination.) (Bug#11331)

  • Added the --port-open-timeout option to mysqld to control how many seconds the server should wait for the TCP/IP port to become free if it cannot be opened. (Bug#15591)

  • Repeated invocation of my_init() and my_end() caused corruption of character set data and connection failure. (Bug#6536)

  • Two new Hungarian collations are included: utf8_hungarian_ci and ucs2_hungarian_ci. These support the correct sort order for Hungarian vowels. However, they do not support the correct order for sorting Hungarian consonant contractions; this issue will be fixed in a future release.

  • Wording of error 1329 changed to No data - zero rows fetched, selected, or processed. (Bug#15206)

  • The INFORMATION_SCHEMA now skips data contained in unlistable/unreadable directories rather than returning an error. (Bug#15851)

  • InnoDB now caches a list of unflushed files instead of scanning for unflushed files during a table flush operation. This improves performance when --innodb-file-per-table is set on a system with a large number of InnoDB tables. (Bug#15653)

  • The message for error 1109 changed from Unknown table ... in order clause to Unknown table ... in field list. (Bug#15091)

  • The mysqltest utility now converts all CR/LF combinations to LF to allow test cases intended for Windows to work properly on UNIX-like systems. (Bug#13809)

  • The mysql_ping function will now retry if the reconnect flag is set and error CR_SERVER_LOST is encountered during the first attempt to ping the server. (Bug#14057)

  • mysqldump now surrounds the DEFINER, SQL SECURITY DEFINER and WITH CHECK OPTION clauses of a CREATE VIEW statement with "not in version" comments to prevent errors in earlier versions of MySQL. (Bug#14871)

  • New charset command added to mysql command-line client. By typing charset name or \C name (such as \C UTF8), the client character set can be changed without reconnecting. (Bug#16217)

  • Client API will now attempt reconnect on TCP/IP if the reconnect flag is set, as is the case with sockets. (Bug#2845)

Bugs fixed:

  • Generating an AUTO_INCREMENT value through a FEDERATED table did not set the value returned by LAST_INSERT_ID(). (Bug#14768)

  • Cursors in stored routines could cause a server crash. (Bug#16887)

  • Setting the myisam_repair_threads system variable to a value larger than 1 could cause corruption of large MyISAM tables. (Bug#11527)

  • The length of a VARCHAR() column that used the utf8 character set would increase each time the table was re-created in a stored procedure or prepared statement, eventually causing the CREATE TABLE statement to fail. (Bug#13134)

  • type_decimal failed with the prepared statement protocol. (Bug#17826)

  • The MySQL server could crash with out of memory errors when performing aggregate functions on a DECIMAL column. (Bug#17602)

  • A stored procedure failed to return data the first time it was called per connection. (Bug#17476)

  • Using DROP FUNCTION IF EXISTS func_name to drop a user-defined function caused a server crash if the server was running with the --skip-grant-tables option. (Bug#17595)

  • Using ALTER TABLE to increase the length of a BINARY(M) column caused column values to be padded with spaces rather than 0x00 bytes. (Bug#16857)

  • A large BIGINT value specified in a WHERE clause could be treated differently depending on whether it is specified as a quoted string. (For example, WHERE bigint_col = 17666000000000000000 versus WHERE bigint_col = '17666000000000000000'). (Bug#9088)

  • A natural join between INFORMATION_SCHEMA tables failed. (Bug#17523)

  • A memory leak caused warnings on slaves for certain statements that executed without warning on the master. (Bug#16175)

  • The embedded server did not allow binding of columns to the MYSQL_TYPE_VAR_STRING data type in prepared statements. (Bug#12070)

  • The embedded server failed various tests in the automated test suite. (Bug#9630, Bug#9631, Bug#9633, Bug#10801, Bug#10911, Bug#10924, Bug#10925, Bug#10926, Bug#10930, Bug#15433)

  • Instance Manager erroneously accepted a list of instance identifiers for the START INSTANCE and STOP INSTANCE commands (should accept only a single identifier). (Bug#12813)

  • For a transaction that used MyISAM and InnoDB tables, interruption of the transaction due to a dropped connection on a master server caused slaves to lose synchrony. (Bug#16559)

  • SELECT with GROUP BY on a view can cause a server crash. (Bug#16382)

  • If the query optimizer transformed a GROUP BY clause in a subquery, it did not also transform the HAVING clause if there was one, producing incorrect results. (Bug#16603)

  • SUBSTRING_INDEX() could yield inconsistent results when applied with the same arguments to consecutive rows in a query. (Bug#14676)

  • The parser allowed CREATE AGGREGATE FUNCTION for creating stored functions, even though AGGREGATE does not apply. (It is used only for CREATE FUNCTION only when creating user-defined functions.) (Bug#16896)

  • Data truncations on non-UNIQUE indexes could crash InnoDB when using multi-byte character sets. (Bug#17530)

  • Triggers created without BEGIN and END clauses resulted in “You have an error in your SQL syntax” errors when dumping and replaying a binary log. (Bug#16878)

  • The RENAME TABLE statement did not move triggers to the new table. (Bug#13525)

  • Clients compiled from source with the --without-readline did not save command history from session to session. (Bug#16557)

  • Stored routines that contained only a single statement were not written properly to the dumpfile when using mysqldump. (Bug#14857)

  • For certain MERGE tables, the optimizer wrongly assumed that using index_merge/intersection was too expensive. (Bug#17314)

  • Executing a SHOW CREATE VIEW query of an invalid view caused the mysql_next_result function of libMySQL.dll to hang. (Bug#15943)

  • BIT fields were not properly handled when using row-based replication. (Bug#13418)

  • Issuing GRANT EXECUTE on a procedure would display any warnings related to the creation of the procedure. (Bug#7787)

  • NDB Cluster: ndb_delete_all would run out of memory on tables containing BLOB columns. (Bug#16693)

  • NDB Cluster: UNIQUE keys in Cluster tables were limited to 225 bytes in length. (Bug#15918)

  • In a highly concurrent environment, a server crash or deadlock could result from execution of a statement that used stored functions or activated triggers coincident with alteration of the tables used by these functions or triggers. (Bug#16593)

  • Previously, a stored function invocation was written to the binary log as DO func_name() if the invocation changes data and occurs within a non-logged statement, or if the function invokes a stored procedure that produces an error. These invocations now are logged as SELECT func_name() instead for better control over error code checking (slave servers could stop due to detecting a different error than occurred on the master). (Bug#14769)

  • CHECKSUM TABLE returned different values on MyISAM table depending on whether the QUICK or EXTENDED options were used. (Bug#8841)

  • MySQL server dropped client connection for certain SELECT statements against views defined that used MERGE algorithm. (Bug#16260)

  • A call to the IF() function using decimal arguments could return incorrect results. (Bug#16272)

  • A statement containing GROUP BY and HAVING clauses could return incorrect results when the HAVING clause contained logic that returned FALSE for every row. (Bug#14927)

  • Using GROUP BY on column used in WHERE clause could cause empty set to be returned. (Bug#16203)

  • For a MySQL 5.0 server, using MySQL 4.1 tables in queries with a GROUP BY clause could result in buffer overrun or a server crash. (Bug#16752)

  • SET sql_mode = N, where N > 31, did not work properly. (Bug#13897)

  • NDB Cluster: Cluster log file paths were truncated to 128 characters. They may now be as long as MAX_PATH (the maximum path length permitted by the operating system). (Bug#17411)

  • The mysql_stmt_store_result() C API function could not be used for a prepared statement if a cursor had been opened for the statement. (Bug#14013)

  • The mysql_stmt_sqlstate() C API function incorrectly returned an empty string rather than '00000' when no error occurred. (Bug#16143)

  • Using the TRUNCATE() function with a negative number for the second argument on a BIGINT column returned incorrect results. (Bug#8461)

  • Instance Manager searched wrong location for password file on some platforms. (Bug#16499)

  • NDB Cluster: Following multiple forced shutdowns and restarts of data nodes, DROP DATABASE could fail. (Bug#17325)

  • NDB Cluster: An UPDATE with an inner join failed to match any records if both tables in the join did not have a primary key. (Bug#17257)

  • NDB Cluster: A DELETE with a join in the WHERE clause failed to retrieve any records if both tables in the join did not have a primary key. (Bug#17249)

  • The error message returned by perror --ndb was prefixed with OS error code: instead of NDB error code:. (Bug#17235)

  • NDB Cluster: In some cases, LOAD DATA INFILE did not load all data into NDB tables. (Bug#17081)

  • NDB Cluster: The REDO log would become corrupted (and thus unreadable) in some circumstances, due to a failure in the query handler. (Bug#17295)

  • NDB Cluster: No error message was generated for setting NoOfFragmentLogFiles too low. (Bug#13966)

  • NDB Cluster: No error message was generated for setting MaxNoOfAttributes too low. (Bug#13965)

  • Binary distributions for Solaris contained files with group ownership set to the non-existing wheel group. Now the bin group is used. (Bug#15562)

  • The DECIMAL data type was not being handled correctly with prepared statements. (Bug#16511)

  • The SELECT privilege was required for triggers that performed no selects. (Bug#15196)

  • The UPDATE privilege was required for triggers that performed no updates. (Bug#15166)

  • CAST(... AS TIME) operations returned different results when using versus not using prepared-statement protocol. (Bug#15805)

  • Improper memory handling for stored routine variables could cause memory overruns and binary log corruption. (Bug#15588)

  • Killing a long-running query containing a subquery could cause a server crash. (Bug#14851)

  • A FULLTEXT query in a prepared statement could result in unexpected behavior. (Bug#14496)

  • A RETURN statement within a trigger caused a server crash. RETURN now is disallowed within triggers. To exit immediately, use LEAVE. (Bug#16829)

  • STR_TO_DATE(1,NULL) caused a server crash. (CVE-2006-3081, Bug#15828)

  • An invalid stored routine could not be dropped. (Bug#16303)

  • When evaluation of the test in a CASE failed in a stored procedure that contained a CONTINUE handler, execution resumed at the beginning of the CASE statement instead of at the end. (Bug#16568)

  • An INSERT statement in a stored procedure corrupted the binary log. (Bug#16621)

  • When MyODBC or any other client called my_init()/my_end() several times, it caused corruption of charset data stored in once_mem_pool. (Bug#11892)

  • When multiple handlers are created for the same MySQL error number within nested blocks, the outermost handler took precedence. (Bug#15011)

  • Certain LEAVE statements in stored procedures were not properly optimized. (Bug#15737)

  • Setting InnoDB path settings to an empty string caused InnoDB storage engine to crash upon server startup. (Bug#16157)

  • InnoDB used full explicit table locks in trigger processing. (Bug#16229)

  • Server crash when dropping InnoDB constraints named TABLENAME_ibfk_0. (Bug#16387)

  • Corrected race condition when dropping the adaptive hash index for a B-tree page in InnoDB. (Bug#16582)

  • The mysql_real_connect() C API function incorrectly reset the MYSQL_OPT_RECONNECT option to its default value. (Bug#15719)

  • InnoDB: After upgrading an InnoDB table having a VARCHAR BINARY column created in MySQL 4.0 to MySQL 5.0, update operations on the table would cause the server to crash. (Bug#16298)

  • Trying to compile the server on Windows generated a stack overflow warning due to a recursive definition of the internal Field_date::store() method. (Bug#15634)

  • The use of LOAD INDEX within a stored routine was permitted and caused the server to crash. Note: LOAD INDEX statements within stored routines are not supported, and now yield an error if attempted. This behavior is intended. (Bug#14270)

  • The mysqlbinlog utility did not output DELIMITER statements, causing syntax errors for stored routine creation statements. (Bug#11312)

  • NDB Cluster returned incorrect Can't find file error for OS error 24, changed to Too many open files. (Bug#15020)

  • Performing a RENAME TABLE on an InnoDB table when the server is started with the --innodb-file-per-table option and the data directory is a symlink caused a server crash. (Bug#15991)

  • Multi-byte path names for LOAD DATA and SELECT ... INTO OUTFILE caused errors. Added the character_set_filesystem system variable, which controls the interpretation of string literals that refer to filenames. (Bug#12448)

  • Certain subqueries where the inner query is the result of a aggregate function would return different results on MySQL 5.0 than on MySQL 4.1. (Bug#15347)

  • Attempts to create FULLTEXT indexes on VARCHAR columns larger than 1000 bytes resulted in error. (Bug#13835)

  • Characters in the gb2312 and euckr character sets which did not have Unicode mappings were truncated. (Bug#15377)

  • Certain nested LEFT JOIN operations were not properly optimized. (Bug#16393)

  • GRANT statements specifying schema names that included underscore characters (i.e. my_schema) did not match if the underscore was escaped in the GRANT statement (i.e. GRANT ALL ON `my\_schema` ...). (Bug#14834)

  • Running out of diskspace in the location specified by the tmpdir option resulted in incorrect error message. (Bug#14634)

  • Test suite sp test left behind tables when the test failed that could cause future tests to fail. (Bug#15866)

  • UPDATE statement crashed multi-byte character set FULLTEXT index if update value was almost identical to initial value only differing in some spaces being changed to &nbsp;. (Bug#16489)

  • A SELECT query which contained a GROUP_CONCAT() and an ORDER BY clause against the INFORMATION_SCHEMA resulted in an empty result set. (Bug#15307)

  • The --replicate-do and --replicate-ignore options were not being enforced on multiple-table statements. (Bug#15699, Bug#16487)

  • A prepared statement created from a SELECT ... LIKE query (such as PREPARE stmt1 FROM 'SELECT col_1 FROM tedd_test WHERE col_1 LIKE ?';) would begin to produce erratic results after being executed repeatedly numerous (thousands) of times. (Bug#12734)

  • The server would crash when the size of an ARCHIVE table grew beyond 2GB. (Bug#15787)

  • Created a user function with an empty string (that is, CREATE FUNCTION ''()), was accepted by the server. Following this, calling SHOW FUNCTION STATUS would cause the server to crash. (Bug#15658)

  • In some cases the query optimizer did not properly perform multiple joins where inner joins followed left joins, resulting in corrupted result sets. (Bug#15633)

  • The absence of a table in the left part of a left or right join was not checked prior to name resolution, which resulted in a server crash. (Bug#15538)

  • NDBCluster: A bitfield whose offset and length totaled 32 would crash the cluster. (Bug#16125)

  • NDBCluster: Upon the completion of a scan where a key request remained outstanding on the primary replica and a starting node died, the scan did not terminate. This caused incompleted error handling of the failed node. (Bug#15908)

  • NDBCluster: The ndb_autodiscover test failed sporadically due to a node not being permitted to connect to the cluster. (Bug#15619)

  • NDBCluster: When running more than one management process in a cluster:

    • ndb_mgm -c host:port -e "node_id stop" would stop a management process running only on the same system on which the command was issued.

    • ndb_mgm -e "shutdown" failed to shut down any management processes at all.

    (Bug#12045, Bug#12124)

  • The contents of fill_help_tables.sql could not be loaded in strict SQL mode. (Bug#15760)

  • fill_help_tables.sql was not included in binary distributions for several platforms. (Bug#15759)

  • An INSERT ... SELECT statement between tables in a MERGE set can return errors when statement involves insert into child table from merge table or vice-versa. (Bug#5390)

  • Certain permission management statements could create a NULL hostname for a user, resulting in a server crash. (Bug#15598)

  • A COMMIT statement followed by a ALTER TABLE statement on a BDB table caused server crash. (Bug#14212)

  • A DELETE statement involving a LEFT JOIN and an IS NULL test on the right-hand table of the join crashed the server when the innodb_locks_unsafe_for_binlog option was enabled. (Bug#15650)

  • Performing an ORDER BY on an indexed ENUM column returned error. (Bug#15308)

  • The NOT FOUND condition handler for stored procedures did not distinguish between a NOT FOUND condition and an exception or warning. (Bug#15231)

  • A stored procedure with an undefined variable and an exception handler would hang the client when called. (Bug#14498)

  • Subselect could return wrong results when records cache and grouping was involved. (Bug#15347)

  • Temporary table aliasing did not work inside stored functions. (Bug#12198)

  • MIN() and MAX() operations were not optimized for views. (Bug#16016)

  • Using an aggregate function as the argument for a HAVING clause would result in the aggregate function always returning FALSE. (Bug#14274)

  • Parallel builds occasionally failed on Solaris. (Bug#16282)

  • The FORCE INDEX keyword in a query would prevent an index merge from being used where an index merge would normally be chosen by the optimizer. (Bug#16166)

  • The COALESCE() function truncated data in a TINYTEXT column. (Bug#15581)

  • InnoDB: Comparison of indexed VARCHAR CHARACTER SET ucs2 COLLATE ucs2_bin columns using LIKE could fail. (Bug#14583)

  • An attempt to open a table that requires a disabled storage engine could cause a server crash. (Bug#15185)

  • Issuing a DROP USER command could cause some users to encounter a hostname is not allowed to connect to this MySQL server error. (Bug#15775)

  • Setting innodb_log_file_size to a value greater than 4G crashed the server. (Bug#15108)

  • A SELECT of a stored function that references the INFORMATION_SCHEMA could crash the server. (Bug#15533)

  • Tarball install package was missing a proper fill_help_tables.sql file. (Bug#15151)

E.1.12. Changes in release 5.0.18 (21 December 2005)

Functionality added or changed:

  • It is now possible to build the server such that MyISAM tables can support up to 128 keys rather than the standard 64. This can be done by configuring the build using the option --with-max-indexes=N, where N≤128 is the maximum number of indexes to permit per table. (Bug#10932)

  • The server treats stored routine parameters and local variables (and stored function return values) according to standard SQL. Previously, parameters, variables, and return values were treated as items in expressions and were subject to automatic (silent) conversion and truncation. Now the data type is observed. Data type conversion and overflow problems that occur in assignments result in warnings, or errors in strict mode. The CHARACTER SET clause for character data type declarations is used. Parameters, variables, and return values must be scalars; it is no longer possible to assign a row value. Also, stored functions execute using the sql_mode value in force at function creation time rather than ignoring it. For more information, see Section 17.2.1, “CREATE PROCEDURE and CREATE FUNCTION Syntax”. (Bug#8702, Bug#8768, Bug#8769, Bug#9078, Bug#9572, Bug#12903, Bug#13705, Bug#13808, Bug#13909, Bug#14161, Bug#15148)

Bugs fixed:

  • API function mysql_stmt_prepare returned wrong field length for TEXT columns. (Bug#15613)

  • The output of mysqldump --triggers did not contain the DEFINER clause in dumped trigger definitions. (Bug#15110)

  • The output of SHOW TRIGGERS contained extraneous whitespace. (Bug#15103)

  • Creating a trigger caused a server crash if the table or trigger database was not known because no default database had been selected. (Bug#14863)

  • SHOW [FULL] COLUMNS and SHOW INDEX FROM did not function with temporary tables. (Bug#14271, Bug#14387, Bug#15224)

  • The INFORMATION_SCHEMA.COLUMNS table did not report the size of BINARY or VARBINARY columns. (Bug#14271)

  • The server would not compile under Cygwin. (Bug#13640)

  • DESCRIBE did not function with temporary tables. (Bug#12770)

  • Reversing the order of operands in a WHERE clause testing a simple equality (such as WHERE t1.col1 = t2.col2) would produce different output from EXPLAIN. (Bug#15106)

  • Column aliases were displayed incorrectly in a SELECT from a view following an update to a base table of the view. (Bug#14861)

  • Set functions could not be aggregated in outer subqueries. (Bug#12762)

  • When a connection using yaSSL was aborted, the server would continue to try to read the closed socket, and the thread continued to appear in the output of SHOW PROCESSLIST. Note that this issue did not affect secure connection attempts using OpenSSL. (Bug#15772)

  • InnoDB: Having two tables in a parent-child relationship enforced by a foreign key where one table used ROW_FORMAT=COMPACT and the other used ROW_FORMAT=REDUNDANT could result in a MySQL server crash. Note that this problem did not exist prior to MySQL 5.0.3, when the compact row format for InnoDB was introduced. (Bug#15550)

  • BDB: A DELETE, INSERT, or UPDATE of a BDB table could cause the server to crash where the query contained a subquery using an index read. (Bug#15536)

  • A left join on a column that having a NULL value could cause the server to crash. (Bug#15268)

  • A replication slave server could sometimes crash on a BEFORE UPDATE trigger if the UPDATE query was not executed in the same database as the table with the trigger. (Bug#14614)

  • A race condition when creating temporary files caused a deadlock on Windows with threads in Opening tables or Waiting for table states. (Bug#12071)

  • InnoDB: If FOREIGN_KEY_CHECKS was 0, InnoDB allowed inconsistent foreign keys to be created. (Bug#13778)

  • NDB Cluster: Under some circumstances, it was possible for a restarting node to undergo a forced shutdown. (Bug#15632)

  • NDB Cluster: If an abort by the Transaction Coordinator timed out, the abort condition was incorrectly handled, causing the transaction record to be released prematurely. (Bug#15685)

  • NDB Cluster: The ndb_read_multi_range.test script failed to drop a table, causing the test to fail. (Bug#15675) (See also Bug#15401.)

  • NDB Cluster: A node which failed during cluster startup was sometimes not removed from the internal list of active nodes. (Bug#15587)

  • Resolution of the argument to the VALUES() function to a variable inside a stored routine caused a server crash. The argument must be a table column. (Bug#15441)

E.1.13. Changes in release 5.0.17 (14 December 2005)

Functionality added or changed:

  • The original Linux RPM packages (5.0.17-0) had an issue with a zlib dependency that would result in an error during an install or upgrade. They were replaced by new binaries, 5.0.17-1. (Bug#15223) Here is a list of the new RPM binaries:

    • MySQL-{Max,client,devel,server,shared,ndb*}-5.0.17-1.i386.rpm

    • MySQL-*-standard-5.0.17-1.rhel3.i386.rpm, MySQL-*-standard-5.0.17-1.rhel3.ia64.rpm, MySQL-*-standard-5.0.17-1.rhel3.x86_64.rpm

    • MySQL-*-pro-5.0.17-1.rhel3.i386.rpm, MySQL-*-pro-5.0.17-1.rhel3.ia64.rpm, MySQL-*-pro-5.0.17-1.rhel3.x86_64.rpm

    • MySQL-*-pro-gpl-5.0.17-1.rhel3.i386.rpm, MySQL-*-pro-gpl-5.0.17-1.rhel3.ia64.rpm, MySQL-*-pro-gpl-5.0.17-1.rhel3.x86_64.rpm

  • The syntax for CREATE TRIGGER now includes a DEFINER clause for specifying which access privileges to check at trigger invocation time. See Section 18.1, “CREATE TRIGGER Syntax”, for more information.

    Known issue: If you attempt to replicate from a master server older than MySQL 5.0.17 to a slave running MySQL 5.0.17 through 5.0.19, replication of CREATE TRIGGER statements fails on the slave with a Definer not fully qualified error. A workaround is to create triggers on the master using a version-specific comment embedded in each CREATE TRIGGER statement:

    CREATE /*!50017 DEFINER = 'root'@'localhost' */ TRIGGER ... ;

    CREATE TRIGGER statements written this way will replicate to newer slaves, which pick up the DEFINER clause from the comment and execute successfully. (Bug#16266)

  • Added a DEFINER column to the INFORMATION_SCHEMA.TRIGGERS table.

  • Invoking a stored function or trigger creates a new savepoint level. When the function or trigger finishes, the previous savepoint level is restored. (See Bug#13825 for more information.)

  • Recursion is allowed in stored procedures. Recursive stored functions and triggers still are disallowed. (Bug#10100)

  • In the latin5_turkish_ci collation, the order of the characters A WITH CIRCUMFLEX, I WITH CIRCUMLEX, and U WITH CIRCUMFLEX was changed. If you have used these characters in any indexed columns, you should rebuild those indexes. (Bug#13421)

  • Support files for compiling with Visual Studio 6 have been removed. (Bug#15094)

  • Added the SHOW FUNCTION CODE and SHOW PROCEDURE CODE statements (available only for servers that have been built with debugging support). See Section, “SHOW PROCEDURE CODE and SHOW FUNCTION CODE Syntax”.

Bugs fixed:

  • RPM packages had an incorrect zlib dependency. (Bug#15223)

  • NDB Cluster: REPLACE failed when attempting to update a primary key value in a Cluster table. (Bug#14007)

  • make failed when attempting to build MySQL in different directory than source. (Bug#11827)

  • Corrected an error-handling problem within stored routines on 64-bit platforms. (Bug#15630)

  • Slave SQL thread cleanup was not handled properly on Mac OS X when a statement was killed, resulting in a slave crash. (Bug#15623, Bug#15668)

  • Symbolic links did not function properly on Windows platforms. (Bug#14960, Bug#14310)

  • mysqld would not start on Windows 9X operating systems including Windows Me. (Bug#15209)

  • InnoDB: During replication, There was a failure to record events in the binary log that still occurred even in the event of a ROLLBACK. For example, this sequence of commands:


    would succeed on the replication master as expected. However, the INSERT would fail on the slave because the ROLLBACK would (erroneously) cause the CREATE TEMPORARY TABLE statement not to be written to the binlog. (Bug#7947)

  • A bug in mysql-test/t/mysqltest.test caused that test to fail. (Bug#15605)

  • The CREATE test case in failed on AIX and SCO. (Bug#15607)

  • NDB Cluster: Creating a table with packed keys failed silently. NDB now supports the PACK_KEYS option to CREATE TABLE correctly. (Bug#14514)

  • NDB Cluster: Using ORDER BY primary_key_column when selecting from a table having the primary key on a VARCHAR column caused a forced shutdown of the cluster. (Bug#14828, Bug#15240, Bug#15682, Bug#15517)

  • NDB Cluster: Under certain circumstances, when mysqld connects to a cluster management server, the connection would fail before a node ID could be allocated. (Bug#15215)

  • NDB Cluster: There was a small window for a node failure to occur during a backup without an error being reported. (Bug#15425)

  • mysql --help was missing a newline after the version string when the bundled readline library was not used. (Bug#15097)

  • Implicit versus explicit conversion of float to integer (such as inserting a float value into an integer column versus using CAST(... AS UNSIGNED before inserting the value) could produce different results. Implicit and explicit typecasts now are done the same way, with a value equal to the nearest integer according to the prevailing rounding mode. (Bug#12956)

  • GROUP BY on a view column did not correctly account for the possibility that the column could contain NULL values. (Bug#14850)

  • ANALYZE TABLE did not properly update table statistics for a MyISAM table with a FULLTEXT index containing stopwords, so a subsequent ANALYZE TABLE would not recognize the table as having already been analyzed. (Bug#14902)

  • The maximum value of MAX_ROWS was handled incorrectly on 64-bit systems. (Bug#14155)

  • NDB Cluster: A forced cluster shutdown occurred when the management daemon was restarted with a changed config.ini file that added an API/SQL node. (Bug#15512)

  • Multiple-table update operations were counting updates and not updated rows. As a result, if a row had several updates it was counted several times for the “rows matched” value but updated only once. (Bug#15028)

  • A statement that produced a warning, when fetched via mysql_stmt_fetch(), did not produce a warning count according to mysql_warning_count(). (Bug#15510)

  • Manual manipulation of the mysql.proc table could cause a server crash. This should not happen, but it is also not supported that the server will notice such changes. (Bug#14233)

  • Revised table locking to allow proper assessment of view security. (Bug#11555)

  • Within a stored procedure, inserting with INSERT ... SELECT into a table with an AUTO_INCREMENT column did not generate the correct sequence number. (Bug#14304)

  • SELECT queries that began with an opening parenthesis were not being placed in the query cache. (Bug#14652)

  • Space truncation was being ignored when inserting into BINARY or VARBINARY columns. Now space truncation results in a warning, or an error in strict mode. (Bug#14299)

  • The database-changing code for stored routine handling caused an error-handling problem resulting in a server crash. (Bug#15392)

  • Selecting from a view processed with the temptable algorithm caused a server crash if the query cache was enabled. (Bug#15119)

  • REPAIR TABLES, BACKUP TABLES, RESTORE TABLES within a stored procedure caused a server crash. (Bug#13012)

  • Creating a view that referenced a stored function that selected from a view caused a crash upon selection from the view. (Bug#15096)

  • ALTER TABLE ... SET DEFAULT had no effect. (Bug#14693)

  • Creating a view within a stored procedure could result in an out of memory error or a server crash. (Bug#14885)

  • InnoDB: A race condition allowed two threads to drop a hash index simultaneously. (Bug#14747)

  • mysqlhotcopy tried to copy INFORMATION_SCHEMA tables. (Bug#14610)

  • CHAR(... USING ...) and CONVERT(CHAR(...) USING ...), though logically equivalent, could produce different results. (Bug#14146)

  • The value of INFORMATION_SCHEMA.TABLES.TABLE_TYPE sometimes was reported as empty. (Bug#14476)

  • InnoDB: Activity on an InnoDB table caused execution time for SHOW CREATE TABLE for the table to increase. (Bug#13762)

  • DELETE from CSV tables reported an incorrect rows-affected value. (Bug#13406)

  • The server crashed if compiled without any transactional storage engines. (Bug#15047)

  • Declaring a stored routine variable to have a DEFAULT value that referred to a variable of the same name caused a server crash. (For example: DECLARE x INT DEFAULT x) Now the DEFAULT variable is interpreted as referring to a variable in an outer scope, if there is one. (Bug#14376)

  • Perform character set conversion of constant values whenever possible without data loss. (Bug#10446)

  • mysql ignored the MYSQL_TCP_PORT environment variable. (Bug#5792)

  • ROW_COUNT() returned an incorrect result after EXECUTE of a prepared statement. (Bug#14956)

  • A UNION of DECIMAL columns could produce incorrect results. (Bug#14216)

  • Queries that select records based on comparisons to a set of column could crash the server if there was one index covering the columns, and a set of other non-covering indexes that taken together cover the columns. (Bug#15204)

  • When using an aggregate function to select from a table that has a multiple-column primary key, adding ORDER BY to the query could produce an incorrect result. (Bug#14920)

  • SHOW CREATE TABLE for a view could fail if the client had locked the view. (Bug#14726)

  • For binary string data types, mysqldump --hex-blob produced an illegal output value of 0x rather than ''. (Bug#13318)

  • Some comparisons for the IN() operator were inconsistent with equivalent comparisons for the = operator. (Bug#12612)

  • In a stored procedure, continuing (via a condition handler) after a failed variable initialization caused a server crash. (Bug#14643)

  • Within a stored procedure, exception handling for UPDATE statements that caused a duplicate-key error caused a Packets out of order error for the following statement. (Bug#13729)

  • Creating a table containing an ENUM or SET column from within a stored procedure or prepared statement caused a server crash later when executing the procedure or statement. (Bug#14410)

  • Selecting from a view used filesort retrieval when faster retrieval was possible. (Bug#14816)

  • Warnings from a previous command were not being reset when fetching from a cursor. (Bug#13524)

  • RESET MASTER failed to delete log files on Windows. (Bug#13377)

  • Using ORDER BY on a column from a view, when also selecting the column normally, and via an alias, caused a mistaken Column 'x' in order clause is ambiguous error. (Bug#14662)

  • Invoking a stored procedure within another stored procedure caused the server to crash. (Bug#13549)

  • Stored functions making use of cursors were not replicated. (Bug#14077)

  • CAST(expr AS BINARY(N)) did not pad with 0x00 to a length of N bytes. (Bug#14255)

  • Casting a FLOAT or DOUBLE whose value was less than 1.0E-06 to DECIMAL would yield an inappropriate value. (Bug#14268)

  • In some cases, a left outer join could yield an invalid result or cause the server to crash, due to a MYSQL_DATA_TRUNCATED error. (Bug#13488)

  • For a invalid view definition, selecting from the INFORMATION_SCHEMA.VIEWS table or using SHOW CREATE VIEW failed, making it difficult to determine what part of the definition was invalid. Now the server returns the definition and issues a warning. (Bug#13818)

  • The server could misinterpret old trigger definition files created before MySQL 5.0.17. Now they are interpreted correctly, but this takes more time and the server issues a warning that the trigger should be re-created. (Bug#14090)

  • mysqldump --triggers did not account for the SQL mode and could dump trigger definitions with missing whitespace if the IGNORE_SPACE mode was enabled. (Bug#14554)

  • Within a trigger definition the CURRENT_USER() function evaluated to the user whose actions caused the trigger to be activated. Now that triggers have a DEFINER value, CURRENT_USER() evaluates to the trigger definer. (Bug#5861)

  • CREATE TABLE tbl_name (...) SELECT ... could crash the server and write invalid data into the .frm file if the CREATE TABLE and SELECT both contained a column with the same name. Also, if a default value is specified in the column definition, it is now actually used. (Bug#14480)

  • A newline character in a column alias in a view definition caused an error when selecting from the view later. (Bug#13622)

  • mysql_fix_privilege_tables.sql contained an erroneous comment that resulted in an error when the file contents were processed. (Bug#14469)

  • On Windows, the server could crash during shutdown if both replication threads and normal client connection threads were active. (Re-fix of Bug#11796)

  • The grammar for supporting the DEFINER = CURRENT_USER clause in CREATE VIEW and ALTER VIEW was incorrect. (Bug#14719)

  • Queries on ARCHIVE tables that used the filesort sorting method could result in a server crash. (Bug#14433)

  • The mysql_stmt_fetch() C APP function could return MYSQL_NO_DATA for a SELECT COUNT(*) FROM tbl_name WHERE 1 = 0 statement, which should return 1 row. (Bug#14845)

  • A LIMIT-related optimization failed to take into account that MyISAM table indexes can be disabled, causing Error 124 when it tried to use such an index. (Bug#14616)

  • A server crash resulted from the following sequence of events: 1) With no default database selected, create a stored procedure with the procedure name explicitly qualified with a database name (CREATE PROCEDURE db_name.proc_name ...). 2) Create another stored procedure with no database name qualifier. 3) Execute SHOW PROCEDURE STATUS. (Bug#14569)

  • Complex subqueries could cause improper internal query execution environment initialization and crash the server. (Bug#14342)

  • For a table that had been opened with HANDLER OPEN, issuing OPTIMIZE TABLE, ALTER TABLE, or REPAIR TABLE caused a server crash. (Bug#14397)

  • A server crash could occur if a prepared statement invoked a stored procedure that existed when the statement was prepared but had been dropped and re-created prior to statement execution. (Bug#12329)

  • A server crash could occur if a prepared statement updated a table for which a trigger existed when the statement was prepared but had been dropped prior to statement execution. (Bug#13399)

  • Statements that implicitly commit a transaction are prohibited in stored functions and triggers. An attempt to create a function or trigger containing such a statement produces an error. (Bug#13627) (The originally reported symptom was that a trigger that dropped another trigger could cause a server crash. That problem was fixed by the patch for Bug#13343.)

E.1.14. Changes in release 5.0.16 (10 November 2005)

Functionality added or changed:

  • When trying to run the server with yaSSL enabled, MySQL now tries to open /dev/random automatically if /dev/urandom is not available. (Bug#13164)

  • The read_only system variable no longer applies to TEMPORARY tables. (Bug#4544)

  • Due to changes in binary logging, the restrictions on which stored routine creators can be trusted not to create unsafe routines have been lifted for stored procedures (but not stored functions). Consequently, the log_bin_trust_routine_creators system variable and the corresponding --log-bin-trust-routine-creators server option were renamed to log_bin_trust_function_creators and --log-bin-trust-function-creators. For backward compatibility, the old names are recognized but result in a warning. See Section 17.4, “Binary Logging of Stored Routines and Triggers”.

  • Added the Compression status variable, which indicates whether the client connection uses compression in the client/server protocol.

  • In MySQL 5.0.13, syntax for DEFINER and SQL SECURITY clauses was added to the CREATE VIEW and ALTER VIEW statements, but the clauses had no effect. They now are enabled. They specify the security context to be used when checking access privileges at view invocation time. See Section 19.2, “CREATE VIEW Syntax”, for more information.

  • The InnoDB, NDB, BDB, and ARCHIVE storage engines now support spatial columns. See Chapter 16, Spatial Extensions.

  • The CHECK TABLE statement now works for ARCHIVE tables.

  • You must now declare a prefix for an index on any column of any Geometry class, the only exception being when the column is a POINT. (Bug#12267)

  • Added a --hexdump option to mysqlbinlog that displays a hex dump of the log in comments. This output can be helpful for replication debugging.

  • MySQL 5.0 now supports character set conversion for seven additional cp950 characters into the big5 character set: 0xF9D6, 0xF9D7, 0xF9D8, 0xF9D9, 0xF9DA, 0xF9DB, and 0xF9DC. Note: If you move data containing these additional characters to an older MySQL installation which does not support them, you may encounter errors. (Bug#12476)

  • When a date column is set NOT NULL and contains 0000-00-00, it will be updated for UPDATE statements that contains columnname IS NULL in the WHERE clause. (Bug#14186)

Bugs fixed:

  • When the DATE_FORMAT() function appeared in both the SELECT and ORDER BY clauses of a query but with arguments that differ by case (i.e. %m and %M), incorrect sorting may have occurred. (Bug#14016)

  • For InnoDB tables, using a column prefix for a utf8 column in a primary key caused Cannot find record errors when attempting to locate records. (Bug#14056)

  • NDB Cluster: A memory leak occurred when performing ordered index scans using indexes a columns larger than 32 bytes, which would eventually lead to the forced shutdown of all mysqld server processes used with the cluster. (Bug#13078)

  • InnoDB: Large innobase_buffer_pool_size and innobase_log_file_size values were displayed incorrectly on 64-bit systems. (Bug#12701)

  • InnoDB: When dropping and adding a PRIMARY KEY, if a loose index scan using only the second part of multiple-part index was chosen, incorrect keys were created and an endless loop resulted. (Bug#13293)

  • NDB Cluster: Repeated transactions using unique index lookups could cause a memory leak leading to error 288, Out of index operations in transaction coordinator. (Bug#14199)

  • Selecting from a table in both an outer query and a subquery could cause a server crash. (Bug#14482)

  • SHOW CREATE TABLE did not display the CONNECTION string for FEDERATED tables. (Bug#13724)

  • For some stored functions dumped by mysqldump --routines, the function definition could not be reloaded later due to a parsing error. (Bug#14723)

  • For a MyISAM table originally created in MySQL 4.1, INSERT DELAYED could cause a server crash. (Bug#13707)

  • The --exit-info=65536 option conflicted with --temp-pool and caused problems with the server's use of temporary files. Now --temp-pool is ignored if --exit-info=65536 is specified. (Bug#9551)

  • ORDER BY DESC within the GROUP_CONCAT() function was not honored when used in a view. (Bug#14466)

  • A comparison with an invalid date (such as WHERE col_name > '2005-09-31') caused any index on col_name not to be used and a string comparison for each row, resulting in slow performance. (Bug#14093)

  • Within stored routines, REPLACE() could return an empty string (rather than the original string) when no replacement was done, and IFNULL() could return garbage results. (Bug#13941)

  • Inserts of too-large DECIMAL values were handled inconsistently (sometimes set to the maximum DECIMAL value, sometimes set to 0). (Bug#13573)

  • Executing REPAIR TABLE, ANALYZE TABLE, or OPTIMIZE TABLE on a view for which an underlying table had been dropped caused a server crash. (Bug#14540)

  • A prepared statement that selected from a view processed using the merge algorithm could crash on the second execution. (Bug#14026)

  • Deletes from a CSV table could cause table corruption. (Bug#14672)

  • An update of a CSV table could cause a server crash. (Bug#13894)

  • For queries with nested outer joins, the optimizer could choose join orders that query execution could not handle. The fix is that now the optimizer avoids choosing such join orders. (Bug#13126)

  • Starting mysqld with the --skip-innodb and --default-storage-engine=innodb (or --default-table-type=innodb caused a server crash. (Bug#9815, re-fix of bug from 5.0.5)

  • mysqlmanager did not start up correctly on Windows 2003. (Bug#14537)

  • The parser did not correctly recognize wildcards in the host part of the DEFINER user in CREATE VIEW statements. (Bug#14256)

  • Memory corruption and a server crash could be caused by statements that used a cursor and generated a result set larger than max_heap_table_size. (Bug#14210)

  • mysqld_safe did not correctly start the -max version of the server (if it was present) if the --ledir option was given. (Bug#13774)

  • The mysql parser did not properly strip the delimiter from input lines less than nine characters long. For example, this could cause USE abc; to result in an Unknown database: abc; error. (Bug#14358)

  • Statements of the form CREATE TABLE ... SELECT ... that created a column with a multi-byte character set could incorrectly calculate the maximum length of the column, resulting in a Specified key was too long error. (Bug#14139)

  • Some updatable views could not be updated. (Bug#14027)

  • Running OPTIMIZE TABLE and other data-updating statements concurrently on an InnoDB table could cause a crash or the following warnings in the error log: Warning: Found locks from different threads in write: enter write_lock, Warning: Found locks from different threads in write: start of release lock. (Bug#11704)

  • Indexes for BDB tables were being limited incorrectly to 255 bytes. (Bug#14381)

  • Use of col_name = VALUES(col_name) in the ON DUPLICATE KEY UPDATE clause of an INSERT statement failed with an Column 'col_name' in field list is ambiguous error. (Bug#13392)

  • On Windows, the server was not ignoring hidden or system directories that Windows may have created in the data directory, and would treat them as available databases. (Bug#4375)

  • mysqldump could not dump views if the -x option was given. (Bug#12838)

  • mysqlimport now issues a SET @@character_set_database = binary statement before loading data so that a file containing mixed character sets (columns with different character sets) can be loaded properly. (Bug#12123)

  • Use of the deprecated --sql-bin-update-same option caused a server crash. (Bug#12974)

  • Maximum values were handled incorrectly for command-line options of type GET_LL. (Bug#12925)

  • For a user that has the SELECT privilege on a view, the server erroneously was also requiring the user to have the EXECUTE privilege at view execution time for stored functions used in the view definition. (Bug#9505)

  • Use of WITH ROLLUP PROCEDURE ANALYSE() could hang the server. (Bug#14138)

  • TIMEDIFF(), ADDTIME(), and STR_TO_DATE() were not reporting that they could return NULL, so functions that invoked them might misinterpret their results. (Bug#14009)

  • The example configuration files supplied with MySQL distributions listed the thread_cache_size variable as thread_cache. (Bug#13811)

  • Using ALTER TABLE to add an index could fail if the operation ran out of temporary file space. Now it automatically makes a second attempt that uses a slower method but no temporary file. In this case, problems that occurred during the first attempt can be displayed with SHOW WARNINGS. (Bug#12166)

  • The input polling loop for Instance Manager did not sleep properly. Instance Manager used up too much CPU as a result. (Bug#14388)

  • Trying to take the logarithm of a negative value is now handled in the same fashion as division by zero. That is, it produces a warning when ERROR_FOR_DIVISION_BY_ZERO is set, and an error in strict mode. (Bug#13820)

  • LOAD DATA INFILE would not accept the same character for both the ESCAPED BY and the ENCLOSED BY clauses. (Bug#11203)

  • The value of Last_query_cost was not updated for queries served from the query cache. (Bug#10303)

  • TIMESTAMPDIFF() returned an incorrect result if one argument but not the other was a leap year and a date was from March or later. (Bug#13534)

  • The server incorrectly accepted column definitions of the form DECIMAL(0,D) for D less than 11. (Bug#13667)

  • The displayed value for the CHARACTER_MAXIMUM_LENGTH column in the INFORMATION_SCHEMA.COLUMNS table was not adjusted for multi-byte character sets. (Bug#14290)

  • A bugfix in MySQL 5.0.15 caused the displayed values for the CHARACTER_MAXIMUM_LENGTH and CHARACTER_OCTET_LENGTH columns in the INFORMATION_SCHEMA.COLUMNS table to be reversed. (Bug#14207)

  • On Windows, the value of character_sets_dir in SHOW VARIABLES output was displayed inconsistently (using both ‘/’ and ‘\’ as pathname component separators). (Bug#14137)

  • Subqueries in the FROM clause failed if the current database was INFORMATION_SCHEMA. (Bug#14089)

  • Corrected a parser precedence problem that resulted in an Unknown column ... in 'on clause' error for some joins. (Bug#13832)

  • For LIKE ... ESCAPE, an escape sequence longer than one character was accepted as valid. Now the sequence must be empty or one character long. If the NO_BACKSLASH_ESCAPES SQL mode is enabled, the sequence must be one character long. (Bug#12595)

  • SELECT DISTINCT CHAR(col_name) returned incorrect results after SET NAMES utf8. (Bug#13233)

  • A prepared statement failed with Illegal mix of collations if the client character set was utf8 and the statement used a table that had a character set of latin1. (Bug#12371)

  • Inserting a new row into an InnoDB table could cause DATETIME values already stored in the table to change. (Bug#13900)

  • The default value of query_prealloc_size was set to 8192, lower than its minimum of 16384. The minimum has been lowered to 8192. (Bug#13334)

  • The server did not take character set into account in checking the width of the mysql.user.Password column. As a result, it could incorrectly generate long password hashes even if the column was not long enough to hold them. (Bug#13064)

  • Inserting cp932 strings into a VARCHAR column caused a server crash rather than string truncation if the string was longer than the column definition. (Bug#12547)

  • Two threads that were creating triggers on an InnoDB table at the same time could deadlock. (Bug#12739)

  • mysqladmin and mysqldump would hang on SCO OpenServer. (Bug#13238)

  • Where one stored procedure called another stored procedure: If the second stored procedure generated an exception, the exception was not caught by the calling stored procedure. For example, if stored procedure A used an EXIT statement to handle an exception, subsequent statements in A would be executed regardless when A was called by another stored procedure B, even if an exception that should have been handled by the EXIT was generated in A. (Bug#7049)

  • Trying to create a stored routine with no database selected would crash the server. (Bug#13514, Bug#13587)

  • Specifying --default-character-set=cp-932 for mysqld would cause SQL scripts containing comments written using that character set to fail with a syntax error. (Bug#13487)

  • Trying to compile the server using the --without-geometry option caused the build to fail. (Bug#12991)

E.1.15. Changes in release 5.0.15 (19 October 2005: Production)

Functionality added or changed:

  • Warning: Incompatible change. For BINARY columns, the pad value and how it is handled has changed. The pad value for inserts now is 0x00 rather than space, and there is no stripping of the pad value for selects. For details, see Section 11.4.2, “The BINARY and VARBINARY Types”.

  • Warning: Incompatible change. The CHAR() function now returns a binary string rather than a string in the connection character set. An optional USING charset clause may be used to produce a result in a specific character set instead. Also, arguments larger than 256 produce multiple characters. They are no longer interpreted modulo 256 to produce a single character each. These changes may cause some incompatibilities, as noted in Section, “Upgrading from MySQL 4.1 to 5.0”.

  • NDB Cluster: The perror utility included with the MySQL-Server RPM now provides support for the --ndb option, and so can be used to obtain error message text for MySQL Cluster error codes. (Bug#13740)

  • NDB Cluster: The ndb_mgm client now reports node startup phases automatically. (Bug#16197)

  • When executing single-table UPDATE or DELETE queries containing an ORDER BY ... LIMIT N clause, but not having any WHERE clause, MySQL can now take advantage of an index to read the first N rows in the ordering specified in the query. If an index is used, only the first N records will be read, as opposed to scanning the entire table. (Bug#12915)

  • The MySQL-server RPM now explicitly assigns the mysql system user to the mysql user group during the postinstallation process. This corrects an issue with upgrading the server on some Linux distributions whereby a previously existing mysql user was not changed to the mysql group, resulting in wrong groups for files created following the installation. (Bug#12823)

  • Added the --tz-utc option to mysqldump. This option adds SET TIME_ZONE='+00:00' to the dump file so that TIMESTAMP columns can be dumped and reloaded between servers in different time zones and protected from changes due to daylight saving time. (Bug#13052)

  • When declaring a local variable (or parameter) named password or name, and setting it with SET (for example, SET password = ''), the new error message ERROR 42000: Variable 'nnn' must be quoted with `...`, or renamed is returned (where 'nnn' is 'password' or 'names'). This means there is a syntax conflict with special sentences like SET PASSWORD = PASSWORD(...) (for setting a user's password) and set names default (for setting charset and collation).

    This must be resolved either by quoting the variable name: SET `password` = ..., which will set the local variable `password`, or by renaming the variable to something else (if setting the user's password is the desired effect).

  • The following statements now cause an implicit COMMIT:










  • NDBCluster: A number of new or improved error messages have been implemented in this release in order to provide better and more accurate diagnostic information regarding cluster configuration issues and problems. (Bug#11739, Bug#11749, Bug#12044, Bug#12786, Bug#13197)

  • NDBCluster: A new “smart” node allocation algorithm means that it is no longer necessary to use sequential IDs for cluster nodes, and that nodes not explicitly assigned IDs should now have IDs allocated automatically in most cases. In practical terms, this means that it is now possible to assign a set of node IDs such as 1, 2, 4, 5 without an error being generated due to the missing 3. (Bug#13009)

Bugs fixed:

  • Issuing STOP SLAVE after having acquired a global read lock with FLUSH TABLES WITH READ LOCK caused a deadlock. Now STOP SLAVE is generates an error in such circumstances. (Bug#10942)

  • An expression in an ORDER BY clause failed with Unknown column 'col_name' in 'order clause' if the expression referred to a column alias. (Bug#11694)

  • mysqldump could not dump views. (Bug#14061)

  • Using an undefined variable in an IF or SET clause inside a stored routine produced an incorrect unknown column ... in 'order clause' error message. (Bug#13037)

  • Trying to create a view dynamically using a prepared statement within a stored procedure failed with error 1295. (Bug#13095)

  • mysqldump --triggers did not quote identifiers properly if the --compatible option was given, so the dump output could not be reloaded. (Bug#13146)

  • Character set conversion was not being done for FIND_IN_SET(). (Bug#13751)

  • CAST(1E+300 TO SIGNED INT) produced an incorrect result on little-endian machines. (Bug#13344)

  • Corrected a memory-copying problem for big5 values when using icc compiler on Linux IA-64 systems. (Bug#10836)

  • On BSD systems, the system crypt() call could return an error for some salt values. The error was not handled, resulting in a server crash. (Bug#13619)

  • Character set file parsing during mysql_real_connect() read past the end of a memory buffer. (Bug#6413)

  • InnoDB: Queries that were executed using an index_merge union or intersection could produce incorrect results if the underlying table used the InnoDB storage engine and had a primary key containing VARCHAR members. (Bug#13484)

  • CREATE DEFINER=... VIEW ... caused the server to crash when run with --skip-grant-tables. (Bug#13504)

  • The --interactive-timeout and --slave-net-timeout options for mysqld were not being obeyed on Mac OS X and other BSD-based platforms. (Bug#8731)

  • Queries of the form (SELECT ...) ORDER BY ... were being treated as a UNION. This improperly resulted in only distinct values being returned (because UNION by default eliminates duplicate results). Also, references to column aliases in ORDER BY clauses following parenthesized SELECT statements were not resolved properly. (Bug#7672)

  • If special characters such as '_' , '%', or the escape character were included within the prefix of a column index, LIKE pattern matching on the indexed column did not return the correct result. (Bug#13046, Bug#13919)

  • An UPDATE query using a join would be executed incorrectly on a replication slave. (Bug#12618)

  • Server crashed during a SELECT statement, writing a message like this to the error log:

    InnoDB: Error: MySQL is trying to perform a SELECT
    InnoDB: but it has not locked any tables in ::external_lock()!


  • NDBCluster: ndb_mgmd would allow a node to be stopped or restarted while another node was still starting up, which could crash the cluster. It should now not be possible to issue a node stop or restart while a different node is still restarting, and the cluster management client issues an error if an attempt is made to do so. (Bug#13461)

  • NDBCluster: Placing multiple [TCP DEFAULT] sections in the cluster config.ini file crashed ndb_mgmd. (The ndb_mgmd process now exits gracefully with an appropriate error message instead.) (Bug#13611)

  • NDBCluster: Trying to run ndbd as system root when connecting to a mysqld process running as the mysql system user via SHM caused the ndbd process to crash. (ndbd should now exit gracefully with an appropriate error message instead.) (Bug#9249)

  • Server may over-allocate memory when performing a FULLTEXT search for stopwords only. (Bug#13582)

  • Queries that use indexes in normal SELECT statements may cause range scans in VIEWs. (Bug#13327)

  • When calling a stored procedure with the syntax CALL schema.procedurename and no default schema selected, ERROR 1046 was displayed after the procedure returned. (Bug#13616)

  • With --log-slave-updates Exec_master_log_pos of SQL thread lagged IO (Bug#13023)

  • SHOW CREATE TABLE did not display any FOREIGN KEY clauses if a temporary file could not be created. Now SHOW CREATE TABLE displays an error message in an SQL comment if this occurs. (Bug#13002)

  • A column in the ON condition of a join that referenced a table in a nested join could not be resolved if the nested join was a right join. (Bug#13597)

  • A qualified reference to a view column in the HAVING clause could not be resolved. (Bug#13410)

  • comp_err did not detect when multiple error messages for a language were given for an error symbol. (Bug#13071)

  • For XA transaction IDs (gtrid.bqual.formatID), uniqueness is supposed to be assessed based on gtrid and bqual. MySQL was also including formatID in the uniqueness check. (Bug#13143)

  • Local (non-XA) and XA transactions are supposed to be mutually exclusive within a given client connection, but this prohibition was not always enforced. (Bug#12935)

  • mysqlcheck --all-databases --analyze --optimize failed because it also tried to analyze and optimize the INFORMATION_SCHEMA tables which it can't. (Bug#13783)

  • SELECT * INTO OUTFILE ... FROM INFORMATION_SCHEMA.schemata failed with an Access denied error. (Bug#13202)

  • A table or view named З (C-cedilla) couldn't be dropped. (Bug#13145)

  • Tests containing SHOW TABLE STATUS or INFORMATION_SCHEMA failed on opnsrv6c. (Bug, #14064, Bug#14065)

E.1.16. Changes in release 5.0.14 (Not released)

Functionality added or changed:

  • The limit of 255 characters on the input buffer for mysql on Windows has been lifted. The exact limit depends on what the system allows, but can be up to 64K characters. A typical limit is 16K characters. (Bug#12929)

  • Re-enabled the --delayed-inserts option for mysqldump, which now checks for each table dumped whether its storage engine supports DELAYED inserts. (Bug#7815)

  • Added the myisam_stats_method, which controls whether NULL values in indexes are considered the same or different when collecting statistics for MyISAM tables. This influences the query optimizer as described in Section 7.4.7, “MyISAM Index Statistics Collection”. (Bug#12232)

  • When an InnoDB foreign key constraint is violated, the error message now indicates which table, column, and constraint names are involved. (Bug#3443)

  • Configure-time checking for the availability of multi-byte macros and functions in the bundled readline library. This improves handling of multi-byte character sets in the mysql client. (Bug#3982)

  • The CHAR() function now takes into account the character set and collation given by the character_set_connection and collation_connection system variables. For an argument n to CHAR(), the result is n mod 256 for single-byte character sets. For multi-byte character sets, n must be a valid code point in the character set. Also, the result string from CHAR() is checked for well-formedness. For invalid arguments, or a result that is not well-formed, MySQL generates a warning (or, in strict SQL mode, an error). (Bug#10504)

  • RENAME TABLE now works for views as well, as long as you do not try to rename a view into a different database. (Bug#5508)

  • Multiple-table UPDATE and DELETE statements that do not affect any rows are now written to the binary log and will replicate. (Bug#13348, Bug#12844)

  • Range scans can now be performed for queries on VIEWs such as column IN (<constants>) and column BETWEEN ConstantA AND ConstantB. (Bug#13317)

Bugs fixed:

  • Certain joins using Range checked for each record in the query execution plan could cause the server to crash. (Bug#24776)

  • NDBCluster: A trigger updating the value of an AUTO_INCREMENT column in a Cluster table would insert an error code rather than the expected value into the column. (Bug#13961)

  • NDBCluster: When performing a delete of a great many (tens of thousands of) rows at once from a Cluster table, an improperly dereferenced pointer could cause the mysqld process to crash. (Bug#9282)

  • CHECKSUM TABLE locked InnoDB tables and did not use a consistent read. (Bug#12669)

  • The --skip-innodb-doublewrite option disables use of the InnoDB doublewrite buffer. However, having this option in effect when creating a new MySQL installation prevented the buffer from even being created, resulting in a server crash later. (Bug#13367)

  • MySQL programs in binary distributions for Solaris 8/9/10 x86 systems would not run on Pentium III machines. (Bug#6772)

  • When SELECT ... FOR UPDATE or SELECT ... LOCK IN SHARE MODE for an InnoDB table were executed from within a stored function or a trigger, they were converted to a non-locking consistent read. (Bug#11238)

  • NDB Cluster: If ndb_restore could not find a free mysqld process, it crashed. (Bug#13512)

  • NDB Cluster: Receipt of several enter single user mode commands by multiple ndb_mgmd processes within a short period of time resulted in cluster shutdown. (Bug#13053)

  • NDB Cluster: Multiple ndb_mgmd processes in a cluster would not know each other's IP addresses. (Bug#12037)

  • NDB Cluster: With two mgmd processes in a cluster, ndb_mgmd output for SHOW would display the same IP address for both processes, even when they were on different hosts. (Bug#11595)

  • NDB Cluster: Queries on NDB tables that are executed using index_merge/union or index_merge/intersection could produce incorrect results. (Bug#13081)

  • The --replicate-rewrite-db and --replicate-do-table options did not work for statements in which tables were aliased to names other than those listed by the options. (Bug#11139)

  • After running configure with the --with-embedded-privilege-control option, the embedded server failed to build. (Bug#13501)

  • Nested handlers within stored procedures didn't work. (Bug#6127)

  • The optimizer chose a less efficient execution plan for col_name BETWEEN const AND const than for col_name = const, even though the two expressions are logically equivalent. Now the optimizer can use the ref access method for both expressions. (Bug#13455)

  • Incorrect creation of DECIMAL local variables in a stored procedure could cause a server crash. (Bug#12589)

  • Queries against a MERGE table that has a composite index could produce incorrect results. (Bug#9112)

  • The server was not rejecting FLOAT(M,D) or DOUBLE(M,D) columns specifications when M was less than D. (Bug#12694)

  • After running configure with the --without-server option, the distribution failed to build. (Bug#11680, Bug#13550)

  • Joins nested under NATURAL or USING joins were sometimes not initialized properly, causing a server crash. (Bug#13545)

  • Locking a view with the query cache enabled and query_cache_wlock_invalidate enabled could cause a server crash. (Bug#13424)

  • A HAVING clause that references an unqualified view column name could crash the server. (Bug#13411)

  • Comparisons involving row constructors containing constants could cause a server crash. (Bug#13356)

  • NDB Cluster: LOAD DATA INFILE with a large data file failed. (Bug#10694)

  • NDB Cluster: Adding an index to a table with a large number of columns (more then 100) crashed the storage node. (Bug#13316)

  • Calling the FORMAT() function with a DECIMAL column value caused a server crash when the value was NULL. (Bug#13361)

  • Aggregate functions sometimes incorrectly were allowed in the WHERE clause of UPDATE and DELETE statements. (Bug#13180)

  • It was possible to create a view that executed a stored function for which you did not have the EXECUTE privilege. (Bug#12812)

  • BIT columns and following columns in NDB tables were corrupt when dumped by mysqldump. (Bug#13152)

  • NATURAL joins and joins with USING against a view could return NULL rather than the correct value. (Bug#13127)

  • Use of a user-defined function within the HAVING clause of a query resulted in an Unknown column error. (Bug#11553)

  • For queries for which the optimizer determined a join type of “Range checked for each record” (as shown by EXPLAIN, the query sometimes could cause a server crash, depending on the data distribution. (Bug#12291)

  • For queries with DISTINCT and WITH ROLLUP, the DISTINCT should be applied after the rollup operation, but was not always. (Bug#12887)

  • The server crashed when processing a view that invoked the CONVERT_TZ() function. (Bug#11416)

  • Shared-memory connections were not working on Windows. (Bug#12723)

E.1.17. Changes in release 5.0.13 (22 September 2005: Release Candidate)

Functionality added or changed:

  • The syntax for CREATE VIEW and ALTER VIEW statements now includes DEFINER and SQL SECURITY clauses for specifying the security context to be used when checking access privileges at view invocation time. (The syntax is present in 5.0.13, but these clauses have no effect until 5.0.16.) See Section 19.2, “CREATE VIEW Syntax”, for more information.

  • The --hex-dump option for mysqldump now also applies to BIT columns.

  • Added a --routines option for mysqldump that enables dumping of stored routines. (Bug#9056)

  • The connection string for FEDERATED tables now is specified using a CONNECTION table option rather than a COMMENT table option.

  • Better detection of connection timeout for replication servers on Windows allows elimination of extraneous Lost connection errors in the error log. (Bug#5588)

  • The counters for the Key_read_requests, Key_reads, Key_write_requests, and Key_writes status variables were changed from unsigned long to unsigned longlong to accommodate larger values before the variables roll over and restart from 0. (Bug#12920)

  • The restriction on the use of PREPARE, EXECUTE, and DEALLOCATE PREPARE within stored procedures was lifted. The restriction still applies to stored functions and triggers. (Bug#10975, Bug#7115, Bug#10605)

  • A new command line argument was added to mysqld to ignore client character set information sent during handshake, and use server side settings instead, to reproduce 4.0 behavior (Bug#9948):

    mysqld --skip-character-set-client-handshake

  • OPTIMIZE TABLE and HANDLER now are prohibited in stored procedures and functions and in triggers. (Bug#12953, Bug#12995)

  • InnoDB: The TRUNCATE TABLE statement for InnoDB tables always resets the counter for an AUTO_INCREMENT column now, regardless of whether there is a foreign key constraint on the table. (Beginning with 5.0.3, TRUNCATE TABLE reset the counter, but only if there was no such constraint.) (Bug#11946)

  • The LEAST() and GREATEST() functions used to return NULL only if all arguments were NULL. Now they return NULL if any argument is NULL, the same as Oracle. (Bug#12791)

  • Two new collations have been added for Esperanto: utf8_esperanto_ci and ucs2_esperanto_ci.

  • Reorder network startup to come after all other initialization, particularly storage engine startup which can take a long time. This also prevents MySQL from being run on a privileged port (any port under 1024) unless run as the root user. (Bug#11707)

  • The Windows binary packages are now compiled with the Microsoft Visual Studio 2003 compiler instead of Microsoft Visual C++ 6.0.

  • The binaries compiled with the Intel icc compiler are now built using icc 9.0 instead of icc 8.1. You will have to install new versions of the Intel icc runtime libraries, which are available from here: (

  • RAND() no longer allows non-constant initializers. (Prior to MySQL 5.0.13, the effect of non-constant initializers is undefined.) (Bug#6172)

Bugs fixed:

  • Incompatible change: A lock wait timeout caused InnoDB to roll back the entire current transaction. Now it rolls back only the most recent SQL statement. (Bug#12308)

  • The FEDERATED storage engine does not support ALTER TABLE, but no appropriate error message was issued. (Bug#13108)

  • mysqldump did not dump triggers properly. (Bug#12597)

  • NDBCluster: The average row size for Cluster tables was being calculated incorrectly. This affected the values shown for the Data_length and Avg_row_length columns in the output generated by SHOW TABLE STATUS as well as the values for the data_length and data_length/table_rows columns shown in the TABLES table of the INFORMATION_SCHEMA database with respect to Cluster tables (tables using other storage engines were not affected by this bug). (Bug#9896)

  • Within a stored procedure, fetching a large number of rows in a loop using a cursor could result in a server crash or an out of memory error. Also, values inserted within a stored procedure using a cursor were interpreted as latin1 even if character set variables had been set to a different character set. (Bug#6513, Bug#9819)

  • For a server compiled with yaSSL, clients that used MySQL Connector/J were not able to establish SSH connections. (Bug#13029)

  • When used in view definitions, DAYNAME(expr), DAYOFWEEK(expr), WEEKDAY(expr) were incorrectly treated as though the expression was TO_DAYS(expr) or TO_DAYS(TO_DAYS(expr)). (Bug#13000)

  • Incorrect implicit nesting of joins caused the parser to fail on queries of the form SELECT ... FROM t1 JOIN t2 JOIN t3 ON t1.t1col = t3.t3col with an Unknown column 't1.t1col' in 'on clause' error. (Bug#12943)

  • NDB: A cluster shutdown following the crash of a data node would fail to terminate the remaining node processes, even though ndb_mgm showed the shutdown request as having been completed. (Bug#10938, Bug#9996, Bug#11623)

  • A column that can be NULL was not handled properly for WITH ROLLUP in a subquery or view. (Bug#12885)

  • Within a transaction, the following statements now cause an implicit commit: CREATE FUNCTION, DROP FUNCTION, DROP PROCEDURE, ALTER FUNCTION, ALTER PROCEDURE, CREATE PROCEDURE. This corrects a problem where these statements followed by ROLLBACK might not be replicated properly. (Bug#12870)

  • Simultaneous execution of DML statements and CREATE TRIGGER or DROP TRIGGER statements on the same table could cause server crashes or errors. (Bug#12704)

  • If a stored function invoked from a SELECT failed with an error, it could cause the client connection to be dropped. Now such errors generate warnings instead so as not to interrupt the SELECT. (Bug#12379)

  • A concurrency problem for CREATE ... SELECT could cause a server crash. (Bug#12845)

  • The server incorrectly generated an Unknown table error message when for attempts to drop tables in the INFORMATION_SCHEMA database. Now it issues an Access denied message. (Bug#9846)

  • The server allowed privileges to be granted explicitly for the INFORMATION_SCHEMA database. Such privileges are always implicit and should not be grantable. (Bug#10734)

  • The server allowed TEMPORARY tables and stored procedures to be created in the INFORMATION_SCHEMA database. (Bug#9683, Bug#10708)

  • The server failed to disallow SET AUTOCOMMIT in stored functions and triggers. It is allowed to change the value of AUTOCOMMIT in stored procedures, but a runtime error might occur if the procedure is invoked from a stored function or trigger. (Bug#12712)

  • Using an INOUT parameter with a DECIMAL data type in a stored procedure caused a server crash. (Bug#12979)

  • Performing an IS NULL check on the MIN() or MAX() of an indexed column in a complex query could produce incorrect results. (Bug#12695)

  • The mysql.server script contained incorrect path for the libexec directory. (Bug#12550)

  • The NDB START BACKUP command could be interrupted by a SHOW command. (Bug#13054)

  • The LIKE ... ESCAPE syntax produced invalid results when escape character was larger than one byte. (Bug#12611)

  • A client connection thread cleanup problem caused the server to crash when closing the connection if the binary log was enabled. (Bug#12517)

  • Using AS to rename a column selected from a view in a subquery made it not possible to refer to that column in the outer query. (Bug#12993)

  • The character_set_system system variable could not be selected with SELECT @@character_set_system. (Bug#11775)

  • A view-creation statement of the form CREATE VIEW name AS SELECT ... FROM tbl_name AS name failed with a Not unique table/alias: 'name' error. (Bug#6808)

  • UNION [DISTINCT] was not removing all duplicates for multi-byte character values. (Bug#12891)

  • Multiplying a DECIMAL value within a loop in a stored routine could incorrectly result in a value of NULL. (Bug#12938)

  • mysql and mysqldump were ignoring the --defaults-extra-file option. (Bug#12917)

  • Columns named in the USING() clause of JOIN ... USING() were incorrectly resolved in case-sensitive fashion. (Bug#13067)

  • Local variables in stored routines were not always initialized correctly. (Bug#13133)

  • SHOW FIELDS FROM schemaname.viewname caused error 1046 when no default schema was set. (Bug#12905)

  • The value of character_set_results could be set to NULL, but returned the string "NULL" when retrieved. (Bug#12363)

  • InnoDB: Limit recursion depth to 200 in deadlock detection to avoid running out of stack space. (Bug#12588)

  • GROUP_CONCAT() ignored an empty string if it was the first value to occur in the result. (Bug#12863)

  • Outer join elimination was erroneously applied for some queries that used a NOT BETWEEN condition, an IN(value_list) condition, or an IF() condition. (Bug#12101, Bug#12102)

  • SHOW FIELDS truncated the TYPE column to 40 characters. (Bug#7142)

  • Use of PREPARE and EXECUTE with a statement that selected from a view in a subquery could cause a server crash. (Bug#12651)

  • On HP-UX 11.x (PA-RISC), the -L option caused mysqlimport to crash. (Bug#12958)

  • If the binary log is enabled, execution of a stored procedure that modifies table data and uses user variables could cause a server crash or incorrect information to be written to the binary log. (Bug#12637)

  • Queries with subqueries, where the inner subquery uses the range or index_merge access method, could return incorrect results. (Bug#12720)

  • After changing the character set with SET CHARACTER SET, the result of the GROUP_CONCAT() function was not converted to the proper character set. (Bug#12829)

  • A bug introduced in MySQL 5.0.12 caused SHOW TABLE STATUS to display an Auto_increment value of 0 for InnoDB tables. (Bug#12973)

  • Foreign keys were not properly enforced in TEMPORARY tables. Foreign keys now are disallowed in TEMPORARY tables. (Bug#12084)

  • Replication of LOAD DATA INFILE failed between systems using different pathname syntax (such as delimiter characters). (Bug#11815)

  • Within a stored procedure, a server crash was caused by assigning to a VARCHAR INOUT parameter the value of an expression that included the variable itself. (For example, SET c = c.) (Bug#12849)

  • SELECT ... JOIN ... ON ... JOIN ... USING caused a server crash. (Bug#12977)

  • Using GROUP BY when selecting from a view in some cases could cause incorrect results to be returned. (Bug#12922)

  • myisampack did not properly pack BLOB values larger than 224 bytes. (Bug#4214)

  • Incorrect results could be returned from a view processed using a temporary table. (Bug#12941)

  • The server crashed when one thread resized the query cache while another thread was using it. (Bug#12848)

  • mysqld_multi now quotes arguments on command lines that it constructs to avoid problems with arguments that contain shell metacharacters. (Bug#11280)

  • InnoDB: A consistent read could return inconsistent results due to a bug introduced in MySQL 5.0.5. (Bug#12947)

  • Deadlock occurred when several account management statements were run (particularly between FLUSH PRIVILEGES/SET PASSWORD and GRANT/REVOKE statements). (Bug#12423)

  • The Windows installer made a change to one of the mysql.proc table files, causing stored routine functionality to be compromised. The Windows installer now never overwrites files in the MySQL data directory. During an upgrade from one version to another, a file in the data directory will not be overwritten even if it has not been modified since it was put there by an older installer.

    If you have already lost access to stored routines because of this problem, you can get them back using the following procedure:

    • Stop the server.

    • In the mysql\data directory under your MySQL installation directory, and replace the proc.frm file with corresponding file from the version of MySQL that you were using before you upgraded.

    • Start the server

    • Start the mysql command-line client (use the root account or another account that has full database privileges) and execute the mysql_fix_privilege_tables.sql script that upgrades the grant tables to the current structure. Instructions for doing this are given in Section 5.5.4, “mysql_fix_privilege_tables — Upgrade MySQL System Tables”.

    After this, all stored routine functionality should work. (Bug#12820)

  • On Windows, the server was preventing tables from being created if the table name was a prefix of a forbidden name. For example, nul is a forbidden name because it's the same as a Windows device name, but a table with the name of n or nu was being forbidden as well. (Bug#12325)

  • InnoDB was too permissive with LOCK TABLE ... READ LOCAL and allowed new inserts into the table. Now READ LOCAL is equivalent to READ for InnoDB. This will cause slightly more locking in mysqldump, but makes InnoDB table dumps consistent with MyISAM table dumps. (Bug#12410)

  • Use of the mysql client HELP command from within a stored routine caused a “packets out of order” error and a lost connection. Now HELP is detected and disallowed within stored routines. (Bug#12490)

  • Use of yaSSL for a secure client connection caused LOAD DATA LOCAL INFILE to fail. (Bug#11286)

  • SHOW CREATE PROCEDURE and SHOW CREATE FUNCTION no longer qualify the routine name with the database name, for consistency with the behavior of SHOW CREATE TABLE. (Bug#10362)

  • A UNION of long utf8 VARCHAR columns was sometimes returned as a column with a LONGTEXT data type rather than VARCHAR. This could prevent such queries from working at all if selected into a MEMORY table because the MEMORY storage engine does not support the TEXT data types. (Bug#12537)

  • If a client has opened an InnoDB table for which the .ibd file is missing, InnoDB would not honor a DROP TABLE statement for the table. (Bug#12852)

  • ALTER TABLE ... DISCARD TABLESPACE for non-InnoDB table caused the client to lose the connection. (The server was not returning the error properly.) (Bug#12207)

  • DO IFNULL(NULL, NULL) and SELECT CAST(IFNULL(NULL, NULL) AS DECIMAL) caused a server crash. (Bug#12841)

  • When using a cursor, a SELECT statement that uses a GROUP BY clause could return incorrect results. (Bug#11904)

  • The SYSDATE() function now returns the time at which it was invoked. In particular, within a stored routine or trigger, SYSDATE() returns the time at which it executes, not the time at which the stored routine or triggering statement began to execute. (Bug#12480)

  • CREATE VIEW inside a stored procedure caused a server crash if the table underlying the view had been deleted. (Bug#12468)

  • A memory leak resulting from repeated SELECT ... INTO statements inside a stored procedure could cause the server to crash. (Bug#11333)

E.1.18. Changes in release 5.0.12 (02 September 2005)

Functionality added or changed:

  • Incompatible change: Beginning with MySQL 5.0.12, natural joins and joins with USING, including outer join variants, are processed according to the SQL:2003 standard. The changes include elimination of redundant output columns for NATURAL joins and joins specified with a USING clause and proper ordering of output columns. (Bug#6136, Bug#6276, Bug#6489, Bug#6495, Bug#6558, Bug#9067, Bug#9978, Bug#10428, Bug#10646, Bug#10972.) The precedence of the comma operator also now is lower compared to JOIN. (Bug#4789, Bug#12065, Bug#13551.)

    These changes make MySQL more compliant with standard SQL. However, they can result in different output columns for some joins. Also, some queries that appeared to work correctly prior to 5.0.12 must be rewritten to comply with the standard. For details about the scope of the changes and examples that show what query rewrites are necessary, see Section, “JOIN Syntax”.

  • Recursive triggers are detected and disallowed. Also, within a stored function or trigger, it is not allowable to modify a table that is already being used (for reading or writing) by the statement that invoked the function or trigger. (Bug#11896, Bug#12644)

  • SHOW TABLE STATUS for a view now shows VIEW in uppercase, consistent with SHOW TABLES and INFORMATION_SCHEMA. (Bug#5501)

  • An optimizer estimate of zero rows for a non-empty InnoDB table used in a left or right join could cause incomplete rollback for the table. (Bug#12779)

  • Calls to stored procedures were written to the binary log even within transactions that were rolled back, causing them to be executed on replication slaves. (Bug#12334)

  • Interleaved execution of stored procedures and functions could be written to the binary log incorrectly, causing replication slaves to get out of sync. (Bug#12335)

  • A query of the form SHOW TABLE STATUS FROM db_name WHERE name IN (select_query) would crash the server. (Bug#12636)

  • Users created using an IP address or other alias rather than a hostname listed in /etc/hosts could not set their own passwords. (Bug#12302)

  • Using DESCRIBE on a view after renaming a column in one of the view's base tables caused the server to crash. (Bug#12533)

  • SHOW OPEN TABLES now supports FROM and LIKE clauses. (Bug#12183)

  • SHOW TABLE STATUS FROM INFORMATION_SCHEMA now sorts output by table name the same as it does for other databases. (Bug#12315)

  • SHOW ENGINE INNODB STATUS now can display longer query strings. (Bug#7819)

  • Added the SLEEP() function, which pauses for the number of seconds given by its argument. (Bug#6760)

  • Trying to drop the default keycache by setting @@global.key_buffer_size to zero now returns a warning that the default keycache cannot be dropped. (Bug#10473)

  • The stability of cursors when used with InnoDB tables was greatly improved. (Bug#11832, Bug#12243, Bug#11309)

  • It is no longer possible to issue FLUSH commands from within stored functions or triggers. See Section F.1, “Restrictions on Stored Routines and Triggers”, for details. (Bug#12280, Bug#12307)

  • INFORMATION_SCHEMA objects are now reported as a SYSTEM VIEW table type. (Bug#11711)

Bugs fixed:

  • CHECKSUM TABLE command returned incorrect results for tables with deleted rows. After upgrading, users who used stored checksum information to detect table changes should rebuild their checksum data. (Bug#12296)

  • A data type of CHAR BINARY was not recognized as valid for stored routine parameters. (Bug#9048)

  • SET GLOBAL TRANSACTION ISOLATION LEVEL was not working. (Bug#11207)

  • NDB Cluster: Corrected the parsing of the CLUSTERLOG command by ndb_mgm to allow multiple items. (Bug#12833)

  • NDB Cluster: Improved error messages related to filesystem issues. (Bug#11218)

  • NDB Cluster: When a schema was detected to be corrupt, ndb neglected to close it, resulting in a “file already open” error if the schema was opened again later. written. (Bug#12027)

  • NDB Cluster: When it could not copy a fragment, ndbd exited without printing a message about the condition to the error log. Now the message is written. (Bug#12900)

  • NDB Cluster: When a disk full condition occurred, ndbd exited without printing a message about the condition to the error log. Now the message is written. (Bug#12716)

  • mysql_fix_privilege_tables.sql was missing a comma, causing a syntax error when executed. (Bug#12705)

  • STRCMP() was not handled correctly in views. (Bug#12489)

  • NDB Cluster: Bad values in config.ini caused ndb_mdmd to crash. (Bug#12043)

  • TRUNCATE TABLE did not work with TEMPORARY InnoDB tables. (Bug#11816)

  • Built-in commands for the mysql client, such as delimiter and \d are now always parsed within files that are read using the \. and source commands. (Bug#11523)

  • ALTER TABLE db_name.t RENAME t did not move the table to default database unless the new name was qualified with the database name. (Bug#11493)

  • It was not possible to create a stored function with a spatial return value data type. (Bug#10499)

  • The only valid values for the PACK_KEYS table option are 0 and 1, but other values were being accepted. (Bug#10056)

  • If a DROP DATABASE fails on a master server due to the presence of a non-database file in the database directory, the master have the database tables deleted, but not the slaves. To deal with failed database drops, we now write DROP TABLE statements to the binary log for the tables so that they are dropped on slaves. (Bug#4680)

  • Improper use of loose index scan in InnoDB sometimes caused incorrect query results. (Bug#12672)

  • DELETE or UPDATE for an indexed MyISAM table could fail. This was due to a change in end-space comparison behavior from 4.0 to 4.1. (Bug#12565)

  • Joins on VARCHAR columns of different lengths could produce incorrect results. (Bug#11398)

  • A “Duplicate column name” error no longer occurs when selecting from a view defined as SELECT * from a join that uses a USING clause on tables that have a common column name. (Bug#6558)

  • Invocations of the SLEEP() function incorrectly could get optimized away for statements in which it occurs. Statements containing SLEEP() incorrectly could be stored in the query cache. (Bug#12689)

  • NDB Cluster: An ALTER TABLE command caused loss of data stored prior to the issuing of the command. (Bug#12118)

  • Query cache is switched off if a thread (connection) has tables locked. This prevents invalid results where the locking thread inserts values between a second thread connecting and selecting from the table. (Bug#12385)

  • NOW(), CURRENT_TIME and values generated by timestamp columns are now constant for the duration of a stored function or trigger. This prevents the breaking of statements-based replication. (Bug#12480, Bug#12481)

  • Some statements executed on a master server caused the SQL thread on a slave to run out of memory. (Bug#12532)

  • A SELECT DISTINCT query with a constant value for one of the columns would return only a single row. (Bug#12625)

  • NDB Cluster: Cluster failed to take character set data into account when recomputing hashes (and thus could not locate records for updating or deletion) following a configuration change and node restart. (Bug#12220)

  • NDB Cluster: Wrong error message displayed when cluster management server closed port while mysqld was connecting. (Bug#10950)

  • A view was allowed to depend on a function that referred to a temporary table. (Bug#10970)

  • Prepared statement parameters could cause errors in the binary log if the character set was cp932. (Bug#11338)

  • The CREATE_OPTIONS column of INFORMATION_SCHEMA.TABLES showed incorrect options for tables in INFORMATION_SCHEMA. (Bug#12397)

  • MEMORY tables using B-Tree index on 64-bit platforms could produce false table is full errors. (Bug#12460)

  • Issuing FLUSH INSTANCES followed by STOP INSTANCE caused instance manager to crash. (Bug#10957)

  • Duplicate instructions in stored procedures resulted in incorrect execution when the optimizer optimized the duplicate code away. (Bug#12168)

  • SHOW TABLES FROM returned wrong error message if the schema specified did not exist. (Bug#12591)

  • The ROW() function returned an incorrect result when comparison involved NULL values. (Bug#12509)

  • Views with multiple UNION and UNION ALL produced incorrect results. (Bug#10624)

  • Stored procedures with particularly long loops could crash server due to memory leak. (Bug#12297, Bug#11247)

  • Trigger and stored procedure execution could break replication. (Bug#12482)

  • A server crash could result from an update of a view defined as a join, even though the update updated only a single table. (Bug#12569)

  • On Windows when the --innodb_buffer_pool_awe_mem_mb option has been given, the server detects whether AWE support is available and has been compiled into the server, and displays an appropriate error message if not. (Bug#6581)

  • The NUMERIC_SCALE column of the INFORMATION_SCHEMA.COLUMNS table should be returned as 0 for integer columns. It was being returned as NULL. (Bug#12301)

  • The COLUMN_DEFAULT column of the INFORMATION_SCHEMA.COLUMNS table should be returned as NULL if a column has no default value. An empty string was being returned if the column was defined as NOT NULL. (Bug#12518)

  • Slave I/O threads were considered to be in the running state when launched (rather than after successfully connecting to the master server), resulting in incorrect SHOW SLAVE STATUS output. (Bug#10780)

  • Column names in subqueries must be unique, but were not being checked for uniqueness. (Bug#11864)

  • On Windows, the server could crash during shutdown if both replication threads and normal client connection threads were active. (Bug#11796)

  • Some subqueries of the form SELECT ... WHERE ROW(...) IN (subquery) were being handled incorrectly. (Bug#11867)

  • Selecting from a view after INSERT statements for the view's underlying table yielded different results than subsequent selects. (Bug#12382)

  • The mysql_info() C API function could return incorrect data when executed as part of a multi-statement that included a mix of statements that do and do not return information. (Bug#11688)

  • When restoring INFORMATION_SCHEMA as the default database after failing to execute a stored procedure in an inaccessible database, the server returned a spurious ERROR 42000: Unknown database 'information_schema' message. (Bug#12318)

  • Renamed the rest() macro in my_list.h to list_rest() to avoid name clashes with user code. (Bug#12327)

  • DATE_ADD() and DATE_SUB() were converting invalid dates to NULL in TRADITIONAL SQL mode rather than rejecting them with an error. (Bug#10627)

  • A trigger that included a SELECT statement could cause a server crash. (Bug#11587)

  • An incorrect conversion from double to ulonglong caused indexes not to be used for BDB tables on HP-UX. (Bug#10802)

  • myisampack failed to delete .TMD temporary files when run with -T option. (Bug#12235)

  • Added portability check for Intel compiler to address a problem compiling InnoDB code. (Bug#11510)

  • XA allowed two active transactions to be started with the same XID. (Bug#12162)

  • Concatenating USER() or DATEBASE() with a column produced invalid results. (Bug#12351)

  • Creating a view that included the TIMESTAMPDIFF() function resulted in a invalid view. (Bug#12298)

  • Comparison of InnoDB multi-part primary keys that include VARCHAR columns can result in incorrect results. (Bug#12340)

  • For PKG installs on Mac OS X, the preinstallation and postinstallation scripts were being run only for new installations and not for upgrade installations, resulting in an incomplete installation process. (Bug#11380)

  • Using cursors and nested queries for the same table, corrupted results were returned for the outer query. (Bug#11909)

  • User variables were not automatically cast for comparisons, causing queries to fail if the column and connection character sets differed. Now when mixing strings with different character sets but the same coercibility, allow conversion if one character set is a superset of the other. (Bug#10892)

  • Selecting from a view defined as a join over many tables could result in a server crash due to miscalculation of the number of conditions in the WHERE clause. (Bug#12470)

  • Pathame values for options such as ---basedir or --datadir didn't work on Japanese Windows machines for directory names containing multi-byte characters having a second byte of 0x5C (‘\’). (Bug#5439)

  • A race condition between server threads could cause a crash if one thread deleted a stored routine while another thread was executing a stored routine. (Bug#12228)

  • Mishandling of comparison for rows containing NULL values against rows produced by an IN subquery could cause a server crash. (Bug#12392)

  • Inserting NULL into a GEOMETRY column for a table that has a trigger could result in a server crash if the table was subsequently dropped. (Bug#12281)

  • A failure to obtain a lock for an IN SHARE MODE query could result in a server crash. (Bug#12082)

  • SELECT ... INTO var_name within a trigger could cause a server crash. (Bug#11973)

  • INSERT ... SELECT ... ON DUPLICATE KEY UPDATE could fail with an erroneous “Column 'col_name' specified twice” error. (Bug#10109)

  • SHOW TABLE STATUS sometimes reported a Row_format value of Dynamic for MEMORY tables, though such tables always have a format of Fixed. (Bug#3094)

  • A query using a LEFT JOIN, an IN subquery on the outer table, and an ORDER BY clause, caused the server to crash when cursors were enabled. (Bug#11901)

  • Using a stored procedure that referenced tables in the INFORMATION_SCHEMA database would return an empty result set. (Bug#10055, Bug#12278)

  • Columns defined as TINYINT(1) were redefined as TINYINT(4) when incorporated into a VIEW. (Bug#11335)

  • ISO-8601 formatted dates were not being parsed correctly. (Bug#7308)

  • FLUSH TABLES WITH READ LOCK combined with LOCK TABLE .. WRITE caused deadlock. (Bug#9459)

  • NULL column definitions read incorrectly for inner tables of nested outer joins. (Bug#12154)

  • GROUP_CONCAT ignores the DISTINCT modifier when used in a query joining multiple tables where one of the tables has a single row. (Bug#12095)

  • UNION query with FULLTEXT could cause server crash. (Bug#11869)

E.1.19. Changes in release 5.0.11 (06 August 2005)

Functionality added or changed:

  • Security improvement: Applied a patch that addresses a potential zlib data vulnerability that could result in an application crash. (CVE-2005-1849) This only affects the binaries for platforms that are linked statically against the bundled zlib (most notably Microsoft Windows and HP-UX).

  • SHOW CHARACTER SET and INFORMATION_SCHEMA now properly report the Latin1 character set as cp1252. (Bug#11216)

  • mysqldump now dumps triggers for each dumped table. This can be suppressed with the --skip-triggers option. (Bug#10431)

  • Added new ER_STACK_OVERRUN_NEED_MORE error message to indicate that, while the stack is not completely full, more stack space is required. (Bug#11213)

  • NDB: Improved handling of the configuration variables NoOfPagesToDiskDuringRestartACC, NoOfPagesToDiskAfterRestartACC, NoOfPagesToDiskDuringRestartTUP, and NoOfPagesToDiskAfterRestartTUP should result in noticeably faster startup times for MySQL Cluster. (Bug#12149)

  • Added support of where clause for queries with FROM DUAL. (Bug#11745)

  • Added an optimization that avoids key access with NULL keys for the ref method when used in outer joins. (Bug#12144)

  • Maximum size of stored procedures increased from 64k to 4Gb. (Bug#11602)

  • Added error message for users who attempt CREATE TABLE ... LIKE and specify a non-table in the LIKE clause. (Bug#6859)

Bugs fixed:

  • DDL statements now are allowed in stored procedures if the procedure is not invoked from a stored function or a trigger. Also fixed problems where a TEMPORARY statement created by one stored routine was inaccessible to another routine invoked during the same connection. (Bug#11126)

  • Creation of the mysql group account failed during the RPM installation. (Bug#12348)

  • big5 strings were not being stored in FULLTEXT index. (Bug#12075)

  • When DROP DATABASE was called concurrently with a DROP TABLE of any table, the MySQL Server crashed. (Bug#12212)

  • max_connections_per_hour setting was being capped by unrelated max_user_connections setting. (Bug#9947)

  • SELECT @@local... returned @@session... in the column header. (Bug#10724)

  • Multiplying ABS() output by a negative number would return incorrect results. (Bug#11402)

  • Updated dependency list for RPM builds to include missing dependencies such as useradd and groupadd. (Bug#12233)

  • mysql_install_db used static localhost value in GRANT tables even when server hostname is not localhost, such as localhost.localdomain. This change is applied to version 5.0.10b on Windows. (Bug#11822)

  • Multiple SELECT SQL_CACHE queries in a stored procedure causes error and client hang. (Bug#6897)

  • Added checks to prevent error when allocating memory when there was insufficient memory available. (Bug#7003)

  • Character data truncated when GBK characters 0xA3A0 and 0xA1 are present. (Bug#11987)

  • Comparisons like SELECT "A\\" LIKE "A\\"; fail when using SET NAMES utf8;. (Bug#11754)

  • When used in a SELECT query against a view, the GROUP_CONCAT() function returned only a single row. (Bug#11412)

  • Calling the C API function mysql_stmt_fetch() after all rows of a result set were exhausted would return an error instead of MYSQL_NO_DATA. (Bug#11037)

  • Information about a trigger was not displayed in the output of SELECT ... FROM INFORMATION_SCHEMA.TRIGGERS when the selected database was INFORMATION_SCHEMA, prior to the trigger's first invocation. (Bug#12127)

  • Issuing successive FLUSH TABLES WITH READ LOCK would cause the mysql client to hang. (Bug#11934)

  • In stored procedures, a cursor that fetched an empty string into a variable would set the variable to NULL instead. (Bug#8692)

  • A trigger dependent on a feature of one SQL_MODE setting would cause an error when invoked after the SQL_MODE was changed. (Bug#5891)

  • A delayed insert that would duplicate an existing record crashed the server instead. (Bug#12226)

  • ALTER TABLE when SQL_MODE = 'TRADITIONAL' gave rise to an invalid error message. (Bug#11964)

  • Attempting to repair a table having a fulltext index on a column containing words whose length exceeded 21 characters and where myisam_repair_threads was greater than 1 would crash the server. (Bug#11684)

  • The MySQL Cluster backup log was invalid where the number of Cluster nodes was not equal to a power of 2. (Bug#11675)

  • GROUP_CONCAT() sometimes returned a result with a different collation from that of its arguments. (Bug#10201)

  • The LPAD() and RPAD() functions returned the wrong length to mysql_fetch_fields(). (Bug#11311)

  • A UNIQUE VARCHAR column would be mis-identified as MUL in table descriptions. (Bug#11227)

  • Incorrect error message displayed if user attempted to create a table in a non-existing database using CREATE database_name.table_name syntax. (Bug#10407)

  • InnoDB: Do not flush after each write, not even before setting up the doublewrite buffer. Flushing can be extremely slow on some systems. (Bug#12125)

  • InnoDB: True VARCHAR: Return NULL columns in the format expected by MySQL. (Bug#12186)

  • Two threads could potentially initialize different characters sets and overwrite each other. (Bug#12109)

  • Unsigned LONG system variables may return incorrect value when retrieved with a SELECT for certain values. (Bug#10351)

  • Prepared statements were not being written to the Slow Query log. (Bug#9968)

E.1.20. Changes in release 5.0.10 (27 July 2005)

Functionality added or changed:

  • Security improvement: Applied a patch that addresses a zlib data vulnerability that could result in a buffer overflow and code execution. (CVE-2005-2096) (Bug#11844)

  • Incompatible change: The namespace for triggers has changed. Previously, trigger names had to be unique per table. Now they must be unique within the schema (database). An implication of this change is that DROP TRIGGER syntax now uses a schema name instead of a table name (schema name is optional and, if omitted, the current schema will be used). (Bug#5892)

    Note: When upgrading from a previous version of MySQL 5 to MySQL 5.0.10 or newer, you must drop all triggers and re-create them or DROP TRIGGER will not work after the upgrade. A suggested procedure for doing this is given in Section, “Upgrading from MySQL 4.1 to 5.0”.

  • The viewing of triggers and trigger metadata has been enhanced as follows:

  • Triggers can now reference tables by name. See Section 18.1, “CREATE TRIGGER Syntax”, for more information.

  • The output of perror --help now displays the --ndb option. (Bug#11999)

  • On Windows, the search path used by MySQL applications for my.ini now includes ..\my.ini (that is, the application's parent directory, and hence, the installation directory). (Bug#10419)

  • Add the --defaults-group-suffix option. See Section 4.3.2, “Using Option Files”.

  • Added mysql_get_character_set_info() C API function for obtaining information about the default character set of the current connection.

  • The bundled version of the readline library was upgraded to version 5.0.

  • It is no longer necessary to issue an explicit LOCK TABLES for any tables accessed by a trigger prior to executing any statements that might invoke the trigger. (Bug#9581, Bug#8406)

  • MySQL Cluster: A new -P option is available for use with the ndb_mgmd client. When called with this option, ndb_mgmd prints all configuration data to stdout, then exits.

  • Add table_lock_wait_timeout global server system variable.

Bugs fixed:

  • NDB: Trying to use a greater number of tables then specified by the value of MaxNoOfTables caused table corruption such that data nodes could not be restarted. (Bug#9994)

  • NDB: Attempting to create or drop tables during a backup would cause the cluster to shut down. (Bug#11942)

  • When attempting to drop a table with a broken unique index, NDB failed to drop the table and erroneously report that the table was unknown. (Bug#11355)

  • SELECT ... NOT IN() gave unexpected results when only static value present between the (). (Bug#11885)

  • Fixed compile error when using GCC4 on AMD64. (Bug#12040)

  • NDB ignored the Hostname option in the NDBD DEFAULT section of the Cluster configuration file. (Bug#12028)

  • SHOW PROCEDURE/FUNCTION STATUS didn't work for users with limited access. (Bug#11577)

  • MySQL server would crash is a fetch was performed after a ROLLBACK when cursors were involved. (Bug#10760)

  • The temporary tables created by an ALTER TABLE on a cluster table were visible to all MySQL servers. (Bug#12055)

  • NDB_MGMD was leaking file descriptors. (Bug#11898)

  • IP addresses not shown in ndb_mgm SHOW command on second ndb_mgmd (or on ndb_mgmd restart). (Bug#11596)

  • Functions that evaluate to constants (such as NOW() and CURRENT_USER() were being evaluated in the definition of a VIEW rather than included verbatim. (Bug#4663)

  • Execution of SHOW TABLES failed to increment the Com_show_tables status variable. (Bug#11685)

  • For execution of a stored procedure that refers to a view, changes to the view definition were not seen. The procedure continued to see the old contents of the view. (Bug#6120)

  • For prepared statements, the SQL parser did not disallow ‘?’ parameter markers immediately adjacent to other tokens, which could result in malformed statements in the binary log. (For example, SELECT * FROM t WHERE? = 1 could become SELECT * FROM t WHERE0 = 1.) (Bug#11299)

  • When two threads compete for the same table, a deadlock could occur if one thread has also a lock on another table through LOCK TABLES and the thread is attempting to remove the table in some manner and the other thread want locks on both tables. (Bug#10600)

  • Aliasing the column names in a VIEW did not work when executing a SELECT query on the VIEW. (Bug#11399)

  • Performing an ORDER BY on a SELECT from a VIEW produced unexpected results when VIEW and underlying table had the same column name on different columns. Bug#11709)

  • The C API function mysql_statement_reset() did not clear error information. (Bug#11183)

  • When used within a subquery, SUBSTRING() returned an empty string. (Bug#10269)

  • Multiple-table UPDATE queries using CONVERT_TZ() would fail with an error. (Bug#9979)

  • mysql_fetch_fields() returned incorrect length information for MEDIUM and LONG TEXT and BLOB columns. (Bug#9735)

  • mysqlbinlog was failing the test suite on Windows due to BOOL being incorrectly cast to INT. (Bug#11567)

  • NDBCLuster: Server left core files following shutdown if data nodes had failed. (Bug#11516)

  • Creating a trigger in one database that references a table in another database was being allowed without generating errors. (Bug#8751)

  • Duplicate trigger names were allowed within a single schema. (Bug#6182)

  • Server did not accept some fully-qualified trigger names. (Bug#8758)

  • The traditional SQL mode accepted invalid dates if the date value provided was the result of an implicit type conversion. (Bug#5906)

  • The MySQL server had issues with certain combinations of basedir and datadir. (Bug#7249)

  • INFORMATION_SCHEMA.COLUMNS had some inaccurate values for some data types. (Bug#11057)

  • LIKE pattern matching using prefix index didn't return correct result. (Bug#11650)

  • For several character sets, MySQL incorrectly converted the character code for the division sign to the eucjpms character set. (Bug#11717)

  • When invoked within a view, SUBTIME() returned incorrect values. (Bug#11760)

  • SHOW BINARY LOGS displayed a file size of 0 for all log files but the current one if the files were not located in the data directory. (Bug#12004)

  • Server-side prepared statements failed for columns with a character set of ucs2. (Bug#9442)

  • References to system variables in an SQL statement prepared with PREPARE were evaluated during EXECUTE to their values at prepare time, not to their values at execution time. (Bug#9359)

  • For server shutdown on Windows, error messages of the form Forcing close of thread n user: 'name' were being written to the error log. Now connections are closed more gracefully without generating error messages. (Bug#7403)

  • Increased the version number of the libmysqlclient shared library from 14 to 15 because it is binary incompatible with the MySQL 4.1 client library. (Bug#11893)

  • A recent optimizer change caused DELETE ... WHERE ... NOT LIKE and DELETE ... WHERE ... NOT BETWEEN to not properly identify the rows to be deleted. (Bug#11853)

  • Within a stored procedure that selects from a table, invoking another procedure that requires a write lock for the table caused that procedure to fail with a message that the table was read-locked. (Bug#9565)

  • Within a stored procedure, selecting from a table through a view caused subsequent updates to the table to fail with a message that the table was read-locked. (Bug#9597)

  • For a stored procedure defined with SQL SECURITY DEFINER characteristic, CURRENT_USER() incorrectly reported the use invoking the procedure, not the user who defined it. (Bug#7291)

  • Creating a table with a SET or ENUM column with the DEFAULT 0 clause caused a server crash if the table's character set was utf8. (Bug#11819)

  • With strict SQL mode enabled, ALTER TABLE reported spurious “Invalid default value” messages for columns that had no DEFAULT clause. (Bug#9881)

  • In SQL prepared statements, comparisons could fail for values not equally space-padded. For example, SELECT 'a' = 'a '; returns 1, but PREPARE s FROM 'SELECT ?=?'; SET @a = 'a', @b = 'a '; PREPARE s FROM 'SELECT ?=?'; EXECUTE s USING @a, @b; incorrectly returned 0. (Bug#9379)

  • Labels in stored routines did not work if the character set was not latin1. (Bug#7088)

  • Invoking the DES_ENCRYPT() function could cause a server crash if the server was started without the --des-key-file option. (Bug#11643)

  • The server crashed upon execution of a statement that used a stored function indirectly (via a view) if the function was not yet in the connection-specific stored routine cache and the statement would update a Handler_xxx status variable. This fix allows the use of stored routines under LOCK TABLES without explicitly locking the mysql.lock table. However, you cannot use mysql.proc in statements that will combine locking of it with modifications for other tables. (Bug#11554)

  • The server crashed when dropping a trigger that invoked a stored procedure, if the procedure was not yet in the connection-specific stored routine cache. (Bug#11889)

  • Selecting the result of an aggregate function for an ENUM or SET column within a subquery could result in a server crash. (Bug#11821)

  • Incorrect column values could be retrieved from views defined using statements of the form SELECT * FROM tbl_name. (Bug#11771)

  • The mysql.proc table was not being created properly with the proper utf8 character set and collation, causing server crashes for stored procedure operations if the server was using a multi-byte character set. To take advantage of the bug fix, mysql_fix_privilege_tables should be run to correct the structure of the mysql.proc table. (Bug#11365)

    Note that it is necessary to run mysql_fix_privileges_tables when upgrading from a previous installation that contains the mysql.proc table (that is, from a previous 5.0 installation). Otherwise, creating stored procedures might not work.

  • Execution of a prepared statement that invoked a non-existent or dropped stored routine would crash the server. (Bug#11834)

  • Executing a statement that invoked a trigger would cause problems unless a LOCK TABLES was first issued for any tables accessed by the trigger. Note: The exact nature of the problem depended upon the MySQL 5.0 release being used: prior to 5.0.3, this resulted in a crash; from 5.0.3 to 5.0.7, MySQL would issue a warning; in 5.0.9, the server would issue an error. (Bug#8406)

    The same issue caused LOCK TABLES to fail following UNLOCK TABLES if triggers were involved. (Bug#9581)

  • In a shared Windows environment, MySQL could not find its configuration file unless the file was in the C:\ directory. (Bug#5354)

E.1.21. Changes in release 5.0.9 (15 July 2005)

Functionality added or changed:

  • An attempt to create a TIMESTAMP column with a display width (for example, TIMESTAMP(6)) now results in a warning. Display widths have not been supported for TIMESTAMP since MySQL 4.1. (Bug#10466)

  • InnoDB: When creating or extending an InnoDB data file, at most one megabyte at a time is allocated for initializing the file. Previously, InnoDB allocated and initialized 1 or 8 megabytes of memory, even if only a few 16-kilobyte pages were to be written. This improves the performance of CREATE TABLE in innodb_file_per_table mode.

  • InnoDB: Various optimizations. Removed unreachable debug code from non-debug builds. Added hints for the branch predictor in gcc. Made assertions occupy less space.

  • InnoDB: Make innodb_thread_concurrency=20 by default. Bypass the concurrency checking if the setting is greater than or equal to 20.

  • InnoDB: Make CHECK TABLE killable. (Bug#9730)

  • Recursion in stored routines is now disabled because it was crashing the server. We plan to modify stored routines to allow this to operate safely in a future release. (Bug#11394)

  • The handling of BIT columns has been improved, and should now be much more reliable in a number of cases. (Bug#10617, Bug#11091, Bug#11572)

  • mysql_real_escape_string() API function now respects NO_BACKSLASH_ESCAPES SQL mode. (Bug#10214)

Bugs fixed:

  • SHOW CREATE VIEW did not take the ANSI MODE into account when quoting identifiers. (Bug#6903)

  • The mysql_config script did not handle symbolic linking properly. (Bug#10986)

  • Incorrect results when using GROUP BY ... WITH ROLLUP on a VIEW. (Bug#11639)

  • Instances of the VAR_SAMP() function in view definitions were converted to VARIANCE(). This is incorrect because VARIANCE() is the same as VAR_POP(), not VAR_SAMP(). (Bug#10651)

  • mysqldump failed when reloading a view if the view was defined in terms of a different view that had not yet been reloaded. mysqldump now creates a dummy table to handle this case. (Bug#10927)

  • mysqldump could crash for illegal or non-existent table names. (Bug#9358)

  • The --no-data option for mysqldump was being ignored if table names were given after the database name. (Bug#9558)

  • The --master-data option for mysqldump resulted in no error if the binary log was not enabled. Now an error occurs unless the --force option is given. (Bug#11678)

  • DES_ENCRYPT() and DES_DECRYPT() require SSL support to be enabled, but were not checking for it. Checking for incorrect arguments or resource exhaustion was also improved for these functions. (Bug#10589)

  • When used in joins, SUBSTRING() failed to truncate to zero any string values that could not be converted to numbers. (Bug#10124)

  • mysqldump --xml did not format NULL column values correctly. (Bug#9657)

  • There was a compression algorithm issue with myisampack for very large datasets (where the total size of all records in a single column was on the order of 3 GB or more) on 64-bit platforms. (A fix for other platforms was made in MySQL 5.0.6.) (Bug#8321)

  • Temporary tables were created in the data directory instead of tmpdir. (Bug#11440)

  • MySQL would not compile correctly on QNX due to missing rint() function. (Bug#11544)

  • A SELECT DISTINCT col_name would work correctly with a MyISAM table only when there was an index on col_name. (Bug#11484)

  • The server would lose table-level CREATE VIEW and SHOW VIEW privileges following a FLUSH PRIVILEGES or server restart. (Bug#9795)

  • In strict mode, an INSERT into a view that did not include a value for a NOT NULL column but that did include a WHERE test on the same column would succeed, This happened even though the INSERT should have been prevented due to the failure to supply a value for the NOT NULL column. (Bug#6443)

  • Running a CHECK TABLES on multiple views crashed the server. (Bug#11337)

  • When a table had a primary key containing a BLOB column, creation of another index failed with the error BLOB/TEXT column used in key specification without keylength, even when the new index did not contain a BLOB column. (Bug#11657)

  • NDB Cluster: When trying to open a table that could not be discovered or unpacked, cluster would return error codes which the MySQL server falsely interpreted as operating system errors. (Bug#103651)

  • Manually inserting a row with host='' into mysql.tables_priv and performing a FLUSH PRIVILEGES would cause the server to crash. (Bug#11330)

  • A cursor using a query with a filter on a DATE or DATETIME column would cause the server to crash server after the data was fetched. (Bug#11172)

  • Closing a cursor that was already closed would cause MySQL to hang. (Bug#9814)

  • Using CONCAT_WS on a column set NOT NULL caused incorrect results when used in a LEFT JOIN. (Bug#11469)

  • Signed BIGINT would not accept -9223372036854775808 as a DEFAULT value. (Bug#11215)

  • Views did not use indexes on all appropriate queries. (Bug#10031)

  • For MEMORY tables, it was possible for updates to be performed using outdated key statistics when the updates involved only very small changes in a very few rows. This resulted in the random failures of queries such as UPDATE t SET col = col + 1 WHERE col_key = 2; where the same query with no WHERE clause would succeed. (Bug#10178)

  • Optimizer performed range check when comparing unsigned integers to negative constants, could cause errors. (Bug#11185)

  • Wrong comparison method used in VIEW when relaxed date syntax used (for example, 2005.06.10). (Bug#11325)

  • The ENCRYPT() and SUBSTRING_INDEX() functions would cause errors when used with a VIEW. (Bug#7024)

  • Clients would hang following some errors with stored procedures. (Bug#9503)

  • Combining cursors and subqueries could cause server crash or memory leaks. (Bug#10736)

  • If a prepared statement cursor is opened but not completely fetched, attempting to open a cursor for a second prepared statement will fail. (Bug#10794)

E.1.22. Changes in release 5.0.8 (Not released)

Note: Starting with version 5.0.8, changes for MySQL Cluster can be found in the combined Change History.

Functionality added or changed:

  • Warning: Incompatible change: Previously, conversion of DATETIME values to numeric form by adding zero produced a result in YYYYMMDDHHMMSS format. The result of DATETIME+0 is now in YYYYMMDDHHMMSS.000000 format. (Bug#12268)

  • MEMORY tables now support indexes of up to 500 bytes. See Section 14.4, “The MEMORY (HEAP) Storage Engine”. (Bug#10566)

  • New SQL_MODE - NO_ENGINE_SUBSTITUTION Prevents automatic substitution of storage engine when the requested storage engine is disabled or not compiled in. (Bug#6877)

  • The statements CREATE TABLE, TRUNCATE TABLE, DROP DATABASE, and CREATE DATABASE cause an implicit commit. (Bug#6883)

  • Expanded on information provided in general log and slow query log for prepared statements. (Bug#8367, Bug#9334)

  • Where a GROUP BY query uses a grouping column from the query's SELECT clause, MySQL now issues a warning. This is done because the SQL standard states that any grouping column must unambiguously reference a column of the table resulting from the query's FROM clause, and allowing columns from the SELECT clause to be used as grouping columns is a MySQL extension to the standard.

    By way of example, consider the following table:

    CREATE TABLE users (
      username VARCHAR(25),
      usergroupid INT NOT NULL

    MySQL allows you to use the alias in this query:

    SELECT usergroupid AS id, COUNT(userid) AS number_of_users
    FROM users
    GROUP BY id;

    However, the SQL standard requires that the column name be used, as shown here:

    SELECT usergroupid AS id, COUNT(userid) AS number_of_users
    FROM users
    GROUP BY usergroupid;

    Queries such as the first of the two shown above will continue to be supported in MySQL; however, beginning with MySQL 5.0.8, using a column alias in this fashion will generate a warning. Note that in the event of a collision between column names and/or aliases used in joins, MySQL attempts to resolve the conflict by giving preference to columns arising from tables named in the query's FROM clause. (Bug#11211)

  • The granting or revocation of privileges on a stored routine is no longer performed when running the server with --skip-grant-tables even after the statement SET @@global.automatic_sp_privileges=1; has been executed. (Bug#9993)

  • Added support for B'10' syntax for bit literal. (Bug#10650)

Bugs fixed:

  • Security fix: On Windows systems, a user with any of the following privileges




    • CREATE

    • SELECT

    on *.* could crash mysqld by issuing a USE LPT1; or USE PRN; command. In addition, any of the commands USE NUL;, USE CON;, USE COM1;, or USE AUX; would report success even though the database was not in fact changed. Note: Although this bug was thought to be fixed previously, it was later discovered to be present in the MySQL 5.0.7-beta release for Windows. (Bug#9148, CVE-2005-0799

  • A CREATE TABLE db_name.tbl_name LIKE ... statement would crash the server when no database was selected. (Bug#11028)

  • SELECT DISTINCT queries or GROUP BY queries without MIN() or MAX() could return inconsistent results for indexed columns. (Bug#11044)

  • The SHOW INSTANCE OPTIONS command in MySQL Instance Manager displayed option values incorrectly for options for which no value had been given. (Bug#11200)

  • An outer join with an empty derived table (a result from a subquery) returned no result. (Bug#11284)

  • An outer join with an ON condition that evaluated to false could return an incorrect result. (Bug#11285)

  • mysqld_safe would sometimes fail to remove the pid file for the old mysql process after a crash. As a result, the server would fail to start due to a false A mysqld process already exists... error. (Bug#11122)

  • CAST( ... AS DECIMAL) didn't work for strings. (Bug#11283)

  • NULLIF() function could produce incorrect results if first argument is NULL. (Bug#11142)

  • Setting @@SQL_MODE = NULL caused an erroneous error message. (Bug#10732)

  • Converting a VARCHAR column having an index to a different type (such as TINYTEXT) gave rise to an incorrect error message. (Bug#10543)

    Note that this bugfix induces a slight change in the behavior of indexes: If an index is defined to be the same length as a field (or is left to default to that field's length), and the length of the field is later changed, then the index will adopt the new length of the field. Previously, the size of the index did not change for some field types (such as VARCHAR) when the field type was changed.

  • sql_data_access column of routines table of INFORMATION_SCHEMA was empty. (Bug#11055)

  • A CAST() value could not be included in a VIEW. (Bug#11387)

  • Server crashed when using GROUP BY on the result of a DIV operation on a DATETIME value. (Bug#11385)

  • Possible NULL values in BLOB columns could crash the server when a BLOB was used in a GROUP BY query. (Bug#11295)

  • Fixed 64 bit compiler warning for packet length in replication. (Bug#11064)

  • Multiple range accesses in a subquery cause server crash. (Bug#11487)

  • An issue with index merging could cause suboptimal index merge plans to be chosen when searching by indexes created on DATE columns. The same issue caused the InnoDB storage engine to issue the warning using a partial-field key prefix in search. (Bug#8441)

  • The mysqlhotcopy script was not parsing the output of SHOW SLAVE STATUS correctly when called with the --record_log_pos option. (Bug#7967)

  • SELECT * FROM table returned incorrect results when called from a stored procedure, where table had a primary key. (Bug#10136)

  • When used in defining a view, the TIME_FORMAT() function failed with calculated values, for example, when passed the value returned by SEC_TO_TIME(). (Bug#7521)

  • SELECT DISTINCT ... GROUP BY constant returned multiple rows (it should return a single row). (Bug#8614)

  • INSERT INTO SELECT FROM view produced incorrect result when using ORDER BY. (Bug#11298)

  • Fixed hang/crash with Boolean full-text search where a query contained more query terms that one-third of the query length (it could be achieved with truncation operator: 'a*b*c*d*'). (Bug#7858)

  • Fixed column name generation in VIEW creation to ensure there are no duplicate column names. (Bug#7448)

  • An ORDER BY clause sometimes had no effect on the ordering of a result when selecting specific columns (as opposed to using SELECT *) from a view. (Bug#7422)

  • Some data definition statements (CREATE TABLE where the table was not a temporary table, TRUNCATE TABLE, DROP DATABASE, and CREATE DATABASE) were not being written to the binary log after a ROLLBACK. This also caused problems with replication. (Bug#6883)

  • Calling a stored procedure that made use of an INSERT ... SELECT ... UNION SELECT ... query caused a server crash. (Bug#11060)

  • Selecting from a view defined using SELECT SUM(DISTINCT ...) caused an error; attempting to execute a SELECT * FROM INFORMATION_SCHEMA.TABLES query after defining such a view crashed the server. (Bug#7015)

  • The mysql client would output a prompt twice following input of very long strings, because it incorrectly assumed that a call to the _cgets() function would clear the input buffer. (Bug#10840)

  • A three byte buffer overflow in the client functions caused improper exiting of the client when reading a command from the user. (Bug#10841)

  • Fixed a problem where a stored procedure caused a server crash if the query cache was enabled. (Bug#9715)

  • SHOW CREATE DATABASE INFORMATION_SCHEMA returned an “unknown database” error. (Bug#9434)

  • Corrected a problem with IFNULL() returning an incorrect result on 64-bit systems. (Bug#11235)

  • Fixed a problem resolving table names with lower_case_table_names=2 when the table name lettercase differed in the FROM and WHERE clauses. (Bug#9500)

  • Fixed server crash due to some internal functions not taking into account that for multi-byte character sets, CHAR columns could exceed 255 bytes and VARCHAR columns could exceed 65,535 bytes. (Bug#11167)

  • Fixed locking problems for multiple-statement DELETE statements performed within a stored routine, such as incorrectly locking a to-be-modified table with a read lock rather than a write lock. (Bug#11158)

  • Fixed a portability problem testing for crypt() support that caused compilation problems when using OpenSSL/yaSSL on HP-UX and Mac OS X. (Bug#10675, Bug#11150)

  • The hostname cache was not working. (Bug#10931)

  • On Windows, mysqlshow did not interpret wildcard characters properly if they were given in the table name argument. (Bug#10947)

  • The default hostname for MySQL server was always mysql. (Bug#11174)

  • Using PREPARE to prepare a statement that invoked a stored routine that deallocated the prepared statement caused a server crash. This is prevented by disabling dynamic SQL within stored routines. (Bug#10975) (Note: This restriction was lifted in 5.0.13 for stored procedures, but not stored functions or triggers.)

  • Using PREPARE to prepare a statement that invoked a stored routine that executed the prepared statement caused a Packets out of order error the second time the routine was invoked. This is prevented by disabling dynamic SQL within stored routines. (Bug#7115) (Note: This restriction was lifted in 5.0.13 for stored procedures, but not stored functions or triggers.)

  • Using prepared statements within a stored routine (PREPARE, EXECUTE, DEALLOCATE) could cause the client connection to be dropped after the routine returned. This is prevented by disabling dynamic SQL within stored routines. (Bug#10605) (Note: This restriction was lifted in 5.0.13 for stored procedures, but not stored functions or triggers.)

  • When using a cursor with a prepared statement, the first execution returned the correct result but was not cleaned up properly, causing subsequent executions to return incorrect results. (Bug#10729)

  • MySQL Cluster: Connections between data nodes and management nodes were not being closed following shutdown of ndb_mgmd. (Bug#11132)

  • MySQL Cluster: mysqld processes would not reconnect to cluster following restart of ndb_mgmd. (Bug#11221)

  • MySQL Cluster: Fixed problem whereby data nodes would fail to restart on 64-bit Solaris (Bug#9025)

  • MySQL Cluster: Calling ndb_select_count() crashed the cluster when running on Red Hat Enterprise 4/64-bit/Opteron. (Bug#10058)

  • MySQL Cluster: Insert records were incorrectly applied by ndb_restore, thus making restoration from backup inconsistent if the binlog contained inserts. (Bug#11166)

  • MySQL Cluster: Cluster would time out and crash after first query on 64-bit Solaris 9. (Bug#8918)

  • MySQL Cluster: ndb_mgm client show command displayed incorrect output after master data node failure. (Bug#11050)

  • MySQL Cluster: A delete performed as part of a transaction caused an erroneous result. (Bug#11133)

  • MySQL Cluster: Not allowing sufficient parallelism in cluster configuration (for example, NoOfTransactions too small) caused ndb_restore to fail without providing any error messages. (Bug#10294)

  • MySQL Cluster: When using dynamically allocated ports on Linux, cluster would hang on initial startup. (Bug#10893)

  • MySQL Cluster: Setting TransactionInactiveTimeout= 0 did not result in an infinite timeout. (Bug#11290)

  • InnoDB: Enforce maximum CHAR_LENGTH() of UTF-8 data in ON UPDATE CASCADE. (Bug#10409)

  • InnoDB: Pad UTF-8 VARCHAR columns with 0x20. Pad UCS2 CHAR columns with 0x0020. (Bug#10511)

E.1.23. Changes in release 5.0.7 (10 June 2005)

Functionality added or changed:

  • Security improvement: Applied a patch to fix a UDF library-loading vulnerability that could result in a buffer overflow and code execution. (CVE-2005-2558)

  • Added mysql_set_character_set() C API function for setting the default character set of the current connection. This allows clients to affect the character set used by mysql_real_escape_string(). (Bug#8317)

  • The behavior of the Last_query_cost system variable has been changed. The default value is now 0 (rather than -1) and it now has session-level scope (rather than being global). See Section 5.2.5, “Status Variables”, for additional information.

  • All characters occurring on the same line following the DELIMITER keyword will be set as delimiter. For example, DELIMITER :; will set :; as the delimiter. This behavior is now consistent between MySQL 5.1 and MySQL 5.0. (Bug#9879)

  • The table, type, and rows columns of EXPLAIN output can now be NULL. This is required for using EXPLAIN on SELECT queries that use no tables (for example, EXPLAIN SELECT 1). (Bug#9899)

  • Placeholders now can be used for LIMIT in prepared statements. (Bug#7306)

  • SHOW BINARY LOGS now displays a File_size column that indicates the size of each file.

  • The --delayed-insert option for mysqldump has been disabled to avoid causing problems with storage engines that do not support INSERT DELAYED. (Bug#7815)

  • Improved the optimizer to be able to use indexes for expressions of the form indexed_col NOT IN (val1, val2, ...) and indexed_col NOT BETWEEN val1 AND val2.. (Bug#10561)

  • Removed mysqlshutdown.exe and mysqlwatch.exe from the Windows “No Installer” distribution (they had already been removed from the “With Installer” distribution before). Removed those programs from the source distribution.

  • Removed WinMySQLAdmin from the source distribution and from the “No Installer” Windows distribution (it had already been removed from the “With Installer” distribution before).

  • InnoDB: In stored procedures and functions, InnoDB no longer takes full explicit table locks for every involved table. Only `intention' locks are taken, similar to those in the execution of an ordinary SQL statement. This greatly reduces the number of deadlocks.

Bugs fixed:

  • Security update: A user with limited privileges could obtain information about the privileges of other users by querying objects in the INFORMATION_SCHEMA database for which that user did not have the requisite privileges. (Bug#10964)

  • Triggers with dropped functions caused crashes. (Bug#5893)

  • Failure of a BEFORE trigger did not prevent the triggering statement from performing its operation on the row for which the trigger error occurred. Now the triggering statement fails as described in Section 18.3, “Using Triggers”. (Bug#10902)

  • Issuing a write lock for a table from one client prevented other clients from accessing the table's metadata. For example, if one client issued a LOCK TABLES mydb.mytable WRITE, then a second client attempting to execute a USE mydb; would hang. (Bug#9998)

  • The LAST_DAY() failed to return NULL when supplied with an invalid argument. See Section 12.6, “Date and Time Functions”. (Bug#10568)

  • The functions COALESCE(), IF(), and IFNULL() performed incorrect conversions of their arguments. (Bug#9939)

  • The TIME_FORMAT() function returned incorrect results with some format specifiers. See Section 12.6, “Date and Time Functions”. (Bug#10590)

  • Dropping stored routines when the MySQL server had been started with --skip-grant-tables generated extraneous warnings. (Bug#9993)

  • A problem with the my_global.h file caused compilation of MySQL to fail on single-processor Linux systems running 2.6 kernels. (Bug#10364)

  • The ucs2_turkish_ci collation failed with upper('i'). UPPER/LOWER now can return a string with different length. (Bug#8610)

  • OPTIMIZE of InnoDB table does not return 'Table is full' if out of tablespace. (Bug#8135)

  • GROUP BY queries with ROLLUP returned wrong results for expressions containing group by columns. (Bug#7894)

  • Fixed bug in FIELD() function where value list contains NULL. (Bug#10944)

  • Corrected a problem where an incorrect data type was returned in the result set metadata when using a prepared SELECT DISTINCT statement to select from a view. (Bug#11111)

  • Fixed bug in the MySQL Instance manager that caused the version to always be unknown when SHOW INSTANCE STATUS was issued. (Bug#10229)

  • Using ORDER BY to sort the results of an IF() that contained a FROM_UNIXTIME() expression returned incorrect results due to integer overflow. (Bug#9669)

  • Fixed a server crash resulting from accessing InnoDB tables within stored functions. This is handled by prohibiting statements that do an implicit or explicit commit or rollback within stored functions or triggers. (Bug#10015)

  • Fixed a server crash resulting from the second invocation of a stored procedure that selected from a view defined as a join that used ON in the join conditions. (Bug#6866)

  • Using ALTER TABLE for a table that had a trigger caused a crash when executing a statement that activated the trigger, and also a crash later with USE db_name for the database containing the table. (Bug#5894)

  • Fixed a server crash resulting from an attempt to allocate too much memory when GROUP BY blob_col and COUNT(DISTINCT) were used. (Bug#11088)

  • Fixed a portability problem for compiling on Windows with Visual Studio 6. (Bug#11153)

  • The incorrect sequence of statements HANDLER tbl_name READ index_name NEXT without a preceding HANDLER tbl_name READ index_name = (value_list) for an InnoDB table resulted in a server crash rather than an error. (Bug#5373)

  • On Windows, with lower_case_table_names set to 2, using ALTER TABLE to alter a MEMORY or InnoDB table that had a mixed-case name also improperly changed the name to lowercase. (Bug#9660)

  • The server timed out SSL connections too quickly on Windows. (Bug#8572)

  • Executing LOAD INDEX INTO CACHE for a table while other threads where selecting from the table caused a deadlock. (Bug#10602)

  • Fixed a server crash resulting from CREATE TABLE ... SELECT that selected from a table being altered by ALTER TABLE. (Bug#10224)

  • The FEDERATED storage engine properly handled outer joins, but not inner joins. (Bug#10848)

  • Consistently report INFORMATION_SCHEMA table names in uppercase in SHOW TABLE STATUS output. (Bug#10059)

  • Fixed a failure of WITH ROLLUP to sum values properly. (Bug#10982)

  • Triggers were not being activated for multiple-table UPDATE or DELETE statements. (Bug#5860)

  • INSERT BEFORE triggers were not being activated for INSERT ... SELECT statements. (Bug#6812)

  • INSERT BEFORE triggers were not being activated for implicit inserts (LOAD DATA). (Bug#8755)

  • If a stored function contained a FLUSH statement, the function crashed when invoked. FLUSH now is disallowed within stored functions. (Bug#8409)

  • Multiple-row REPLACE could fail on a duplicate-key error when having one AUTO_INCREMENT key and one unique key. (Bug#11080)

  • Fixed a server crash resulting from invalid string pointer when inserting into the table. (Bug#10181)

  • Multiple-table DELETE did always delete on the fly from the first table that was to be deleted from. In some cases, when using many tables and it was necessary to access the same row twice in the first table, we could miss some rows-to-be-deleted from other tables. This is now fixed.

  • The mysql_next_result() function could hang if you were executing many statements in a mysql_real_query() call and one of those statements raised an error. (Bug#9992)

  • The combination of COUNT(), DISTINCT, and CONCAT() sometimes triggered a memory deallocation bug on Windows resulting in a server crash. (Bug#9593)

  • InnoDB: Do very fast shutdown only if innodb_fast_shutdown=2, but wait for threads to exit and release allocated memory if innodb_fast_shutdown=1. Starting with MySQL/InnoDB 5.0.5, InnoDB would do brutal shutdown also when innodb_fast_shutdown=1. (Bug#9673)

  • InnoDB: Fixed InnoDB: Error: stored_select_lock_type is 0 inside ::start_stmt()! in a stored procedure call if innodb_locks_unsafe_for_binlog was set in my.cnf. (Bug#10746)

  • InnoDB: Fixed a duplicate key error that occurred with REPLACE in a table with an AUTO-INC column. (Bug#11005)

  • MySQL would pass an incorrect key length to storage engines for MIN(). This could cause warnings InnoDB: Warning: using a partial-field key prefix in search. in the .err log. (Bug#11039, same as Bug#13218 in MySQL 4.1.15)

  • Fixed a server crash for INSERT or UPDATE when the WHERE clause contained a correlated subquery that referred to a column of the table being modified. (Bug#6384)

  • Fixed a problem causing an incorrect result for columns that include an aggregate function as part of an expression when WITH ROLLUP is added to GROUP BY. (Bug#7914)

  • Fixed a problem with returning an incorrect result from a view that selected a COALESCE() expression from the result of an outer join. (Bug#9938)

  • MySQL was adding a DEFAULT clause to ENUM columns that included no explicit DEFAULT and were defined as NOT NULL. (This is supposed to happen only for columns that are NULL.) (Bug#6267)

  • Corrected inappropriate error messages that were displayed when attempting to set the read-only warning_count and error_count system variables. (Bug#10339)

E.1.24. Changes in release 5.0.6 (26 May 2005)

Functionality added or changed:

  • Incompatible change: MyISAM and InnoDB tables created with DECIMAL columns in MySQL 5.0.3 to 5.0.5 will appear corrupt after an upgrade to MySQL 5.0.6. Dump such tables with mysqldump before upgrading, and then reload them after upgrading. (The same incompatibility will occur for these tables created in MySQL 5.0.6 after a downgrade to MySQL 5.0.3 to 5.0.5.) (Bug#10465, Bug#10625)

  • Incompatible change: The behavior of LOAD DATA INFILE and SELECT ... INTO OUTFILE has changed when the FIELDS TERMINATED BY and FIELDS ENCLOSED BY values both are empty. Formerly, a column was read or written the display width of the column. For example, INT(4) was read or written using a field with a width of 4. Now columns are read and written using a field width wide enough to hold all values in the field. However, data files written before this change was made might not be reloaded correctly with LOAD DATA INFILE for MySQL 4.1.12 and up. This change also affects data files read by mysqlimport and written by mysqldump --tab, which use LOAD DATA INFILE and SELECT ... INTO OUTFILE. For more information, see Section 13.2.5, “LOAD DATA INFILE Syntax”. (Bug#12564)

  • The precision of the DECIMAL data type has been increased from 64 to 65 decimal digits.

  • Added the div_precision_increment system variable, which indicates the number of digits of precision by which to increase the result of division operations performed with the / operator.

  • Added the log_bin_trust_routine_creators system variable, which applies when binary logging is enabled. It controls whether stored routine creators can be trusted not to create stored routines that will cause unsafe events to be written to the binary log.

  • Added the --log-bin-trust-routine-creators server option for setting the log_bin_trust_routine_creators system variable from the command line.

  • Implemented the STMT_ATTR_PREFETCH_ROWS option for the mysql_stmt_attr_set() C API function. This sets how many rows to fetch at a time when using cursors with prepared statements.

  • The GRANT and REVOKE statements now support an object_type clause to be used for disambiguating whether the grant object is a table, a stored function, or a stored procedure. Use of this clause requires that you upgrade your grant tables. See Section 5.5.4, “mysql_fix_privilege_tables — Upgrade MySQL System Tables”. (Bug#10246)


  • Added a --show-warnings option to mysql to cause warnings to be shown after each statement if there are any. This option applies to interactive and batch mode. In interactive mode, \w and \W may be used to enable and disable warning display. (Bug#8684)

  • Removed a limitation that prevented use of FIFOs as logging targets (such as for the general query log). This modification does not apply to the binary log and the relay log. (Bug#8271)

  • Added a --debug option to my_print_defaults.

  • When the server cannot read a table because it cannot read the .frm file, print a message that the table was created with a different version of MySQL. (This can happen if you create tables that use new features and then downgrade to an older version of MySQL.) (Bug#10435)

  • SHOW VARIABLES now shows the slave_compressed_protocol, slave_load_tmpdir and slave_skip_errors system variables. (Bug#7800)

  • Removed unused system variable myisam_max_extra_sort_file_size.

  • Changed default value of myisam_data_pointer_size from 4 to 6. This allows us to avoid table is full errors for most cases.

  • The variable concurrent_insert now takes 3 values. Setting this to 2 changes MyISAM to do concurrent inserts to end of table if table is in use by another thread.

  • New /*> prompt for mysql. This prompt indicates that a /* ... */ comment was begun on an earlier line and the closing */ sequence has not yet been seen. (Bug#9186)

  • If strict SQL mode is enabled, VARCHAR and VARBINARY columns with a length greater than 65,535 no longer are silently converted to TEXT or BLOB columns. Instead, an error occurs. (Bug#8295, Bug#8296)


  • InnoDB: When the maximum length of SHOW INNODB STATUS output would be exceeded, truncate the beginning of the list of active transactions, instead of truncating the end of the output. (Bug#5436)

  • InnoDB: If innodb_locks_unsafe_for_binlog option is set and the isolation level of the transaction is not set to serializable then InnoDB uses a consistent read for select in clauses like INSERT INTO ... SELECT and UPDATE ... (SELECT) that do not specify FOR UPDATE or IN SHARE MODE. Thus no locks are set to rows read from selected table.

  • Updated version of libedit to 2.9. (Bug#2596)

  • Removed mysqlshutdown.exe and mysqlwatch.exe from the Windows “With Installer” distribution.

Bugs fixed:

  • Security fix: mysql_install_db created the mysql_install_db.X file with a predictable filename and insecure permissions, which allowed local users to execute arbitrary SQL commands by modifying the file's contents. (CVE-2005-1636)

  • An error in the implementation of the MyISAM compression algorithm caused myisampack to fail with very large sets of data (total size of all the records in a single column needed to be >= 3 GB in order to trigger this issue). (Bug#8321)

  • Statements that create and use stored routines were not being written to the binary log, which affects replication and data recovery options. (Bug#2610) Stored routine-related statements now are logged, subject to the issues and limitations discussed in Section 17.4, “Binary Logging of Stored Routines and Triggers”.

  • Disabled binary logging within stored routines to avoid writing spurious extra statements to the binary log. For example, if a routine p() executes an INSERT statement, then for CALL p(), the CALL statement appears in the binary log, but not the INSERT statement. (Bug#9100)

  • Statements that create and drop triggers were not being written to the binary log, which affects replication and data recovery options. (Bug#10417) Trigger-related statements now are logged, subject to the issues and limitations discussed in Section 17.4, “Binary Logging of Stored Routines and Triggers”.

  • The mysql_stmt_execute() and mysql_stmt_reset() C API functions now close any cursor that is open for the statement, which prevents a server crash. (Bug#9478)

  • The mysql_stmt_attr_set() C API function now returns an error for option values that are defined in mysql.h but not yet implemented, such as CURSOR_TYPE_SCROLLABLE. (Bug#9643)

  • MERGE tables could fail on Windows due to incorrect interpretation of pathname separator characters for filenames in the .MRG file. (Bug#10687)

  • Fixed a server crash for INSERT ... ON DUPLICATE KEY UPDATE with MERGE tables, which do not have unique indexes. (Bug#10400)

  • Fix FORMAT() to do better rounding for double values (for example, FORMAT(4.55,1) returns 4.6, not 4.5). (Bug#9060)

  • Disallow use of SESSION or GLOBAL for user variables or local variables in stored routines. (Bug#9286)

  • Fixed a server crash when using GROUP BY ... WITH ROLLUP on an indexed column in an InnoDB table. (Bug#9798)

  • In strict SQL mode, some assignments to numeric columns that should have been rejected were not (such as the result of an arithmetic expression or an explicit CAST() operation). (Bug#6961)

  • CREATE TABLE t AS SELECT UUID() created a VARCHAR(12) column, which is too small to hold the 36-character result from UUID(). (Bug#9535)

  • Fixed a server crash in the BLACKHOLE storage engine. (Bug#10175)

  • Fixed a server crash resulting from repeated calls to ABS() when the argument evaluated to NULL. (Bug#10599)

  • For a user-defined function invoked from within a prepared statement, the UDF's initialization routine was invoked for each execution of the statement, but the deinitialization routine was not. (It was invoked only when the statement was closed.) Similarly, when invoking a UDF from within a trigger, the initialization routine was invoked but the deinitialization routine was not. For UDFs that have an expensive deinit function (such as myperl, this bugfix will have negative performance consequences. (Bug#9913)

  • Portability fix for Cygwin: Don't use #pragma interface in source files. (Bug#10241)

  • Fix CREATE TABLE ... LIKE to work when lower_case_table_names is set on a case-sensitive filesystem and the source table name is not given in lowercase. (Bug#9761)

  • Fixed a server crash resulting from a CHECK TABLE statement where the arguments were a view name followed by a table name. (Bug#9897)

  • Within a stored procedure, attempting to update a view defined as an inner join failed with a Table 'tbl_name' was locked with a READ lock and can't be updated error. (Bug#9481)

  • Fixed a problem with INFORMATION_SCHEMA tables being inaccessible depending on lettercase used to refer to them. (Bug#10018)

  • my_print_defaults was ignoring the --defaults-extra-file option or crashing when the option was given. (Bug#9136, Bug#9851)

  • The INFORMATION_SCHEMA.COLUMNS table was missing columns of views for which the user has access. (Bug#9838)

  • Fixed a mysqldump crash that occurred with the --complete-insert option when dumping tables with a large number of long column names. (Bug#10286)

  • Corrected a problem where DEFAULT values were not assigned properly to BIT(1) or CHAR(1) columns if certain other columns preceded them in the table definition. (Bug#10179)

  • For MERGE tables, avoid writing absolute pathnames in the .MRG file for the names of the constituent MyISAM tables so that if the data directory is moved, MERGE tables will not break. For mysqld, write just the MyISAM table name if it is in the same database as the MERGE table, and a path relative to the data directory otherwise. For the embedded servers, absolute pathnames may still be used. (Bug#5964)

  • Corrected a problem resolving outer column references in correlated subqueries when using the prepared statements. (Bug#10041)

  • Corrected the error message for exceeding the MAX_CONNECTIONS_PER_HOUR limit to say max_connections_per_hour instead of max_connections. (Bug#9947)

  • Fixed incorrect memory block allocation for the query cache in the embedded server. (Bug#9549)

  • Corrected an inability to select from a view within a stored procedure. (Bug#9758)

  • Fixed a server crash resulting from use of AVG(DISTINCT) with GROUP BY ... WITH ROLLUP. (Bug#9799)

  • Fixed a server crash resulting from use of DISTINCT AVG() with GROUP BY ... WITH ROLLUP. (Bug#9800)

  • Fixed a server crash resulting from use of a CHAR or VARCHAR column with MIN() or MAX() and GROUP BY ... WITH ROLLUP. (Bug#9820)

  • Fixed a server crash resulting from use of SELECT DISTINCT with a prepared statement that uses a cursor. (Bug#9520)

  • Fixed server crash resulting from multiple calls to a stored procedure that assigned the result of a subquery to a variable or compared it to a value with IN. (Bug#5963)

  • Selecting from a single-table view defined on multiple-table views caused a server crash. (Bug#8528)

  • If the file named by a --defaults-extra-file option does not exist or is otherwise inaccessible, an error now occurs. (Bug#5056)

  • net_read_timeout and net_write_timeout were not being respected on Windows. (Bug#9721)

  • SELECT from INFORMATION_SCHEMA tables failed if the statement has a GROUP BY clause and an aggregate function in the select list. (Bug#9404)

  • Corrected some failures of prepared statements for SQL (PREPARE plus EXECUTE) to return all rows for some SELECT statements. (Bug#9096, Bug#9777)

  • Remove extra slashes in --tmpdir value (for example, convert /var//tmp to /var/tmp, because they caused various errors. (Bug#8497)

  • Added Create_routine_priv, Alter_routine_priv, and Execute_priv privileges to the privilege table. (They had been added to mysql.db in MySQL 5.0.3 but not to the host table.) (Bug#8166)

  • Fixed configure to properly recognize whether NPTL is available on Linux. (Bug#2173)

  • Incomplete results were returned from INFORMATION_SCHEMA.COLUMNS for INFORMATION_SCHEMA tables for non-root users. (Bug#10261)

  • Fixed a portability problem in compiling with VC++ on Windows. (Bug#10245)

  • SELECT 0/0 returned 0 rather than NULL. (Bug#10404)

  • MAX() for an INT UNSIGNED (unsigned 4-byte integer) column could return negative values if the column contained values larger than 231. (Bug#9298)

  • SHOW CREATE VIEW got confused and could not find the view if there was a temporary table with the same name as the view. (Bug#8921)

  • Fixed a deadlock resulting from use of FLUSH TABLES WITH READ LOCK while an INSERT DELAYED statement is in progress. (Bug#7823)

  • The optimizer was choosing suboptimal execution plans for certain outer joins where the right table of a left join (or left table of a right join) had both ON and WHERE conditions. (Bug#10162)

  • RENAME TABLE for an ARCHIVE table failed if the .arn file was not present. (Bug#9911)

  • Invoking a stored function that executed a SHOW statement resulted in a server crash. (Bug#8408)

  • Fixed problems with static variables and do not link with libsupc++ to allow building on FreeBSD 5.3. (Bug#9714)

  • Fixed some awk script portability problems in cmd-line-utils/libedit/ (Bug#9954)

  • Fixed a problem with mishandling of NULL key parts in hash indexes on VARCHAR columns, resulting in incorrect query results. (Bug#9489, Bug#10176)

  • InnoDB: Fixed a critical bug in InnoDB AUTO_INCREMENT: it could assign the same value for several rows. (Bug#10359) InnoDB: All InnoDB bug fixes from 4.1.12 and earlier versions, and also the fixes to bugs #10335 and #10607 listed in the 4.1.13 change notes.

E.1.25. Changes in release 5.0.5 (Not released)

No public release of MySQL 5.0.5 was made. The changes described in this section are available in MySQL 5.0.6.

Functionality added or changed:

  • Added support for the BIT data type to the MEMORY, InnoDB, and BDB storage engines.

  • SHOW VARIABLES no longer displays the deprecated log_update system variable. (Bug#9738)

  • The behavior controlled by the --innodb-fast-shutdown option now can be changed at runtime by setting the value of the global innodb_fast_shutdown system variable. It now accepts values 0, 1 and 2 (except on Netware where 2 is disabled). If set to 2, then when the MySQL server shuts down, InnoDB will just flush its logs and shut down brutally (and quickly) as if a MySQL crash had occurred; no committed transaction will be lost, but a crash recovery will be done at next startup.

Bugs fixed:

  • Security fix: If mysqld was started with --user=non_existent_user, it would run using the privileges of the account it was invoked from, even if that was root. (Bug#9833)

  • Corrected a failure to resolve a column reference correctly for a LEFT JOIN that compared a join column to an IN subquery. (Bug#9338)

  • Fixed a problem where, after an internal temporary table in memory became too large and had to be converted to an on-disk table, the error indicator was not cleared and the query failed with error 1023 (Can't find record in ''). (Bug#9703)

  • Multiple-table updates could produce spurious data-truncation warnings if they used a join across columns that are indexed using a column prefix. (Bug#9103)

  • Fixed a string-length comparison problem that caused mysql to fail loading dump files containing certain ‘\’-sequences. (Bug#9756)

  • Fixed a failure to resolve a column reference properly when an outer join involving a view contained a subquery and the column was used in the subquery and the outer query. (Bug#6106, Bug#6107)

  • Use of a subquery that used WITH ROLLUP in the FROM clause of the main query sometimes resulted in a Column cannot be null error. (Bug#9681)

  • Fixed a memory leak that occurred when selecting from a view that contained a subquery. (Bug#10107)

  • Fixed an optimizer bug in computing the union of two ranges for the OR operator. (Bug#9348)

  • Fixed a segmentation fault in mysqlcheck that occurred when the last table checked in --auto-repair mode returned an error (such as the table being a MERGE table). (Bug#9492)

  • SET @var= CAST(NULL AS [INTEGER|CHAR]) now sets the result type of the variable to INTEGER/CHAR. (Bug#6598)

  • Incorrect results were returned for queries of the form SELECT ... LEFT JOIN ... WHERE EXISTS (subquery), where the subquery selected rows based on an IS NULL condition. (Bug#9516)

  • Executing LOCK TABLES and then calling a stored procedure caused an error and resulting in the server thinking that no stored procedures exist. (Bug#9566)

  • Selecting from a view containing a subquery caused the server to hang. (Bug#8490)

  • Within a stored procedure, attempting to execute a multiple-table UPDATE failed with a Table 'tbl_name' was locked with a READ lock and can't be updated error. (Bug#9486)

  • Starting mysqld with the --skip-innodb and --default-storage-engine=innodb (or --default-table-type=innodb caused a server crash. (Bug#9815)

  • Queries containing CURRENT_USER() incorrectly were registered in the query cache. (Bug#9796)

  • Setting the storage_engine system variable to MEMORY succeeded, but retrieving the variable resulted in a value of HEAP (the old name for the MEMORY storage engine) rather than MEMORY. (Bug#10039)

  • mysqlshow displayed an incorrect row count for tables. (Bug#9391)

  • The server died with signal 11 if a non-existent location was specified for the location of the binary log. Now the server exits after printing an appropriate error message. (Bug#9542)

  • Fixed a problem in the client/server protocol where the server closed the connection before sending the final error message. The problem could show up as a Lost connection to MySQL server during query when attempting to connect to access a non-existent database. (Bug#6387, Bug#9455)

  • Fixed a readline-related crash in mysql when the user pressed Control-R. (Bug#9568)

  • For stored functions that should return a YEAR value, corrected a failure of the value to be in YEAR format. (Bug#8861)

  • Fixed a server crash resulting from invocation of a stored function that returned a value having an ENUM or SET data type. (Bug#9775)

  • Fixed a server crash resulting from invocation of a stored function that returned a value having a BLOB data type. (Bug#9102)

  • Fixed a server crash resulting from invocation of a stored function that returned a value having a BIT data type. (Bug#7648)

  • TIMEDIFF() with a negative time first argument and positive time second argument produced incorrect results. (Bug#8068)

  • Fixed a problem with OPTIMIZE TABLE for InnoDB tables being written twice to the binary log. (Bug#9149)

  • InnoDB: Prevent ALTER TABLE from changing the storage engine if there are foreign key constraints on the table. (Bug#5574, Bug#5670)

  • InnoDB: Fixed a bug where next-key locking doesn't allow the insert which does not produce a phantom. (Bug#9354) If the range is of type 'a' <= uniquecolumn, InnoDB lock only the RECORD, if the record with the column value 'a' exists in a CLUSTERED index. This allows inserts before a range.

  • InnoDB: When FOREIGN_KEY_CHECKS=0, ALTER TABLE and RENAME TABLE will ignore any type incompatibilities between referencing and referenced columns. Thus, it will be possible to convert the character sets of columns that participate in a foreign key. Be sure to convert all tables before modifying any data! (Bug#9802)

  • Provide more informative error messages in clustered setting when a query is issued against a table that has been modified by another mysqld server. (Bug#6762)

E.1.26. Changes in release 5.0.4 (16 April 2005)

Functionality added or changed:

  • Added ENGINE=MyISAM table option when creating mysql.proc table in mysql_create_system_tables script to make sure the table is created as a MyISAM table even if the default storage engine has been changed. (Bug#9496)

  • SHOW CREATE TABLE for an INFORMATION_SCHEMA table no longer prints a MAX_ROWS value because the value has no meaning. (Bug#8941)

  • Invalid DEFAULT values for CREATE TABLE now generate errors. (Bug#5902)

  • Added --show-table-type option to mysqlshow, to display a column indicating the table type, as in SHOW FULL TABLES. (Bug#5036)

  • The way the time zone information is stored in the binary log was changed, so that it is now possible to have a replication master and slave running with different global time zones. A drawback is that replication from 5.0.4 masters to pre-5.0.4 slaves is impossible.

  • Added --with-big-tables compilation option to configure. (Previously it was necessary to pass -DBIG_TABLES to the compiler manually in order to enable large table support.) See Section, “Typical configure Options”, for details.

  • New configuration directives !include and !includedir implemented for including option files and searching directories for option files. See Section 4.3.2, “Using Option Files”, for usage.

Bugs fixed:

  • The use of XOR together with NOT ISNULL() erroneously resulted in some outer joins being converted to inner joins by the optimizer. (Bug#9017)

  • Fixed an optimizer problem where extraneous comparisons between NULL values in indexed columns were being done for operators such as = that are never true for NULL. (Bug#8877)

  • Fixed the client/server protocol for prepared statements so that reconnection works properly when the connection is killed while reconnect is enabled. (Bug#8866)

  • A server installed as a Windows service and started with --shared-memory could not be stopped. (Bug#9665)

  • Fixed a server crash resulting from multiple executions of a prepared statement involving a join of an INFORMATION_SCHEMA table with another table. (Bug#9383)

  • Fixed utf8_spanish2_ci and ucs2_spanish2_ci collations to not consider ‘r’ equal to ‘rr’. If you upgrade to this version from an earlier version, you should rebuild the indexes of affected tables. (Bug#9269)

  • mysqldump dumped core when invoked with --tmp and --single-transaction options and a non-existent table name. (Bug#9175)

  • Allow extra HKSCS and cp950 characters (big5 extension characters) to be accepted in big5 columns. (Bug#9357)

  • mysql.server no longer uses non-portable alias command or LSB functions. (Bug#9852)

  • Fixed a server crash resulting from GROUP BY on a decimal expression. (Bug#9210)

  • In prepared statements, subqueries containing parameters were erroneously treated as const tables during preparation, resulting in a server crash. (Bug#8807)

  • InnoDB: ENUM and SET columns were treated incorrectly as character strings. This bug did not manifest itself with latin1 collations if there were less than about 100 elements in an ENUM, but it caused malfunction with UTF-8. Old tables will continue to work. In new tables, ENUM and SET will be internally stored as unsigned integers. (Bug#9526)

  • InnoDB: Avoid test suite failures caused by a locking conflict between two server instances at server shutdown/startup. This conflict on advisory locks appears to be the result of a bug in the operating system; these locks should be released when the files are closed, but somehow that does not always happen immediately in Linux. (Bug#9381)

  • InnoDB: True VARCHAR: InnoDB stored the 'position' of a row wrong in a column prefix primary key index; this could cause MySQL to complain ERROR 1032: Can't find record … in an update of the primary key, and also some ORDER BY or DISTINCT queries. (Bug#9314)

  • InnoDB: Fix bug in MySQL/InnoDB 5.0.3: SQL statements were not rolled back on error. (Bug#8650)

  • Fixed a Commands out of sync error when two prepared statements for single-row result sets were open simultaneously. (Bug#8880)

  • Fixed a server crash after a call to mysql_stmt_close() for single-row result set. (Bug#9159)

  • Fixed server crashes for CREATE TABLE ... SELECT or INSERT INTO ... SELECT when selecting from multiple-table view. (Bug#8703, Bug#9398)

  • TRADITIONAL SQL mode should prevent inserts where a column with no default value is omitted or set to a value of DEFAULT. Fixed cases where this restriction was not enforced. (Bug#5986)

  • Fixed a server crash when creating a PRIMARY KEY for a table, if the table contained a BIT column. (Bug#9571)

  • Warning message from GROUP_CONCAT() did not always indicate correct number of lines. (Bug#8681)

  • The commit count cache for NDB was not properly invalidated when deleting a record using a cursor. (Bug#8585)

  • Fixed option-parsing code for the embedded server to understand K, M, and G suffixes for the net_buffer_length and max_allowed_packet options. (Bug#9472)

  • Selecting a BIT column failed if the binary client/server protocol was used. (Bug#9608)

  • Fixed a permissions problem whereby information in INFORMATION_SCHEMA could be exposed to a user with insufficient privileges. (Bug#7214)

  • An error now occurs if you try to insert an invalid value via a stored procedure in STRICT mode. (Bug#5907)

  • Link with libsupc++ on Fedora Core 3 to get language support functions. (Bug#6554)

  • The value of the CHARACTER_MAXIMUM_LENGTH and CHARACTER_OCTET_LENGTH columns of the INFORMATION_SCHEMA.COLUMNS table must be NULL for numeric columns, but were not. (Bug#9344)

  • DROP TABLE did not drop triggers that were defined for the table. DROP DATABASE did not drop triggers in the database. (Bug#5859, Bug#6559)

  • CREATE OR REPLACE VIEW and ALTER VIEW now require the CREATE VIEW and DROP privileges, not CREATE VIEW and DELETE. (DELETE is a row-level privilege, not a table-level privilege.) (Bug#9260)

  • Some user variables were not being handled with “implicit” coercibility. (Bug#9425)

  • Setting the max_error_count system variable to 0 resulted in a setting of 1. (Bug#9072)

  • Fixed a collation coercibility problem that caused a union between binary and non-binary columns to fail. (Bug#6519)

  • Fixed a bug in division of floating point numbers. It could cause nine zeros (000000000) to be inserted in the middle of the quotient. (Bug#9501)

  • INFORMATION_SCHEMA tables had an implicit upper limit for the number of rows. As a result, not all data could be returned for some queries. (Bug#9317)

  • Fixed a problem with the tee command in mysql that resulted in mysql crashing. (Bug#8499)

  • CAST() now produces warnings when casting incorrect INTEGER and CHAR values. This also applies to implicit string to number casts. (Bug#5912)

  • ALTER TABLE now fails in STRICT mode if the alteration generates warnings.

  • Using CONVERT('0000-00-00',date) or CAST('0000-00-00' as date) with the NO_ZERO_DATE SQL mode enabled now produces a warning. (Bug#6145)

  • Inserting a zero date in a DATE, DATETIME or TIMESTAMP column during TRADITIONAL mode now produces an error. (Bug#5933)

  • Inserting a zero date into a DATETIME column in TRADITIONAL mode now produces an error.

  • STR_TO_DATE() now produces errors in strict mode (and warnings otherwise) when given an illegal argument. (Bug#5902)

  • Fixed a problem with ORDER BY that sometimes caused incorrect sorting of utf8 data. (Bug#9309)

  • Fixed server crash resulting from queries that combined SELECT DISTINCT, SUM(), and ROLLUP. (Bug#8615)

  • Incorrect results were returned from queries that combined SELECT DISTINCT, GROUP BY, and ROLLUP. (Bug#8616)

  • Too many rows were returned from queries that combined ROLLUP and LIMIT if SQL_CALC_FOUND_ROWS was given. (Bug#8617)

  • If, on a replication master a LOAD DATA INFILE operation was interrupted (by, for example, an integrity constraint violation or killed connection), the slave skipped the LOAD DATA INFILE entirely, thus missing changes if this command permanently inserted or updated table records before being interrupted. (Bug#3247)

E.1.27. Changes in release 5.0.3 (23 March 2005: Beta)

Note: This Beta release, as any other pre-production release, should not be installed on “production” level systems or systems with critical data. It is good practice to back up your data before installing any new version of software. Although MySQL worked very hard to ensure a high level of quality, protect your data by making a backup as you would for any software beta release.

Functionality added or changed:

  • Security improvement: The server creates .frm, .MYD, .MYI, .MRG, .ISD, and .ISM table files only if a file with the same name does not already exist. Thanks to Stefano Di Paola for finding and informing us about this issue. (CVE-2005-0711)

  • Security improvement: User-defined functions should have at least one symbol defined in addition to the xxx symbol that corresponds to the main xxx() function. These auxiliary symbols correspond to the xxx_init(), xxx_deinit(), xxx_reset(), xxx_clear(), and xxx_add() functions. mysqld by default no longer loads UDFs unless they have at least one auxiliary symbol defined in addition to the main symbol. The --allow-suspicious-udfs option controls whether UDFs that have only an xxx symbol can be loaded. By default, the option is off. mysqld also checks UDF filenames when it reads them from the mysql.func table and rejects those that contain directory pathname separator characters. (It already checked names as given in CREATE FUNCTION statements.) See Section, “UDF Calling Sequences for Simple Functions”, Section, “UDF Calling Sequences for Aggregate Functions”, and Section, “User-Defined Function Security Precautions”. Thanks to Stefano Di Paola for finding and informing us about this issue. (CVE-2005-0709, CVE-2005-0710)

  • The DECIMAL and NUMERIC data types now are handled with a fixed-point library that allows for precision math handling that results in more accurate results. See Chapter 21, Precision Math.

    Warning: Incompatible change: A consequence of the change in handling of the DECIMAL and NUMERIC fixed-point data types is that the server is more strict to follow standard SQL. For example, a data type of DECIMAL(3,1) stores a maximum value of 99.9. Previously, the server allowed larger numbers to be stored. That is, it stored a value such as 100.0 as 100.0. Now the server clips 100.0 to the maximum allowable value of 99.9. If you have tables that were created before MySQL 5.0.3 and that contain floating-point data not strictly legal for the data type, you should alter the data types of those columns. For example:

    ALTER TABLE tbl_name MODIFY col_name DECIMAL(4,1);

    Warning: Incompatible change: For user-defined functions, exact-value decimal arguments such as 1.3 or DECIMAL column values were passed as REAL_RESULT values prior to MySQL 5.0.3. As of 5.0.3, they are passed as strings with a type of DECIMAL_RESULT. If you upgrade to 5.0.3 and find that your UDF now receives string values, use the initialization function to coerce the arguments to numbers as described in Section, “UDF Argument Processing”.

    For the FLOOR() and CEILING() functions, the return type is no longer always BIGINT. For exact-value numeric arguments, the return value has an exact-value numeric type. For string or floating-point arguments, the return value has a floating-point type.

  • Incompatible change: The C API ER_WARN_DATA_TRUNCATED warning symbol was renamed to WARN_DATA_TRUNCATED.

  • InnoDB: Upgrading from 4.1: The sorting order for end-space in TEXT columns for InnoDB tables has changed. Starting from 5.0.3, InnoDB compares TEXT columns as space-padded at the end. If you have a non-unique index on a TEXT column, you should run CHECK TABLE on it, and run OPTIMIZE TABLE if the check reports errors. If you have a UNIQUE INDEX on a TEXT column, you should rebuild the table with OPTIMIZE TABLE.

  • Implemented support for XA transactions. See Section 13.4.7, “XA Transactions”. The implementation make the innodb_safe_binlog system variable obsolete, so it has been removed.

  • mysqlbinlog now prints a ROLLBACK statement at the end of its output, in case the server crashed while it was in the process of writing the final entry into the last binary log named on the command line. This causes any half-written transaction to be rolled back when the output is executed. The ROLLBACK is harmless if the binary log file was written and closed normally.

  • Added the engine_condition_pushdown system variable. For NDB, setting this variable to 1 allows processing of some WHERE clause conditions to be processed in NDB nodes before rows are sent to the MySQL server, rather than having rows sent to the server for evaluation.

  • Additional control over transaction completion was implemented. The COMMIT and ROLLBACK statements support AND [NO] CHAIN and RELEASE clauses. There is a new RELEASE SAVEPOINT statement. The completion_type system variable was added for setting the global and session default completion type.

  • A new CREATE USER privilege was added.

  • my.cnf in the compile-time datadir (usually /usr/local/mysql/data/ in the binary tarball distributions) is not being read anymore. The value of the environment variable MYSQL_HOME is used instead of the hard-coded path.

  • Support for the ISAM storage engine has been removed. If you have ISAM tables, you should convert them before upgrading. See Section, “Upgrading from MySQL 4.1 to 5.0”.

  • Support for RAID options in MyISAM tables has been removed. If you have tables that use these options, you should convert them before upgrading. See Section, “Upgrading from MySQL 4.1 to 5.0”.

  • Added support for AVG(DISTINCT).

  • ONLY_FULL_GROUP_BY no longer is included in the ANSI composite SQL mode. (Bug#8510)

  • mysqld_safe will create the directory where the UNIX socket file is to be located if the directory does not exist. This applies only to the last component of the directory pathname. (Bug#8513)

  • The coercibility for the return value of functions such as USER() or VERSION() now is “system constant” rather than “implicit.” This makes these functions more coercible than column values so that comparisons of the two do not result in Illegal mix of collations errors. COERCIBILITY() was modified to accommodate this new coercibility value. See Section 12.10.3, “Information Functions”.

  • User variable coercibility has been changed from “coercible” to “implicit.” That is, user variables have the same coercibility as column values.

  • Boolean full-text phrase searching now requires only that matches contain exactly the same words as the phrase and in the same order. Non-word characters no longer need match exactly.

  • CHECKSUM TABLE returns a warning for non-existing tables. The checksum value remains NULL as before. (Bug#8256)

  • The server now includes a timestamp in the Ready for connections message that is written to the error log at startup. (Bug#8444)

  • Added SQL_NOTES session variable to cause Note-level warnings not to be recorded. (Bug#6662)

  • Allowed the service-installation command for Windows servers to specify a single option other than --defaults-file following the service name. This is for compatibility with MySQL 4.1. (Bug#7856)

  • InnoDB: Commit after every 10,000 copied rows when executing ALTER TABLE, CREATE INDEX, DROP INDEX or OPTIMIZE TABLE. This makes it much faster to recover from an aborted operation.

  • Added VAR_POP() and STDDEV_POP() as standard SQL aliases for the VARIANCE() and STDDEV() functions that compute population variance and standard deviation. Added new VAR_SAMP() and STDDEV_SAMP() functions to compute sample variance and standard deviation. (Bug#3190)

  • Fixed a problem with out-of-order packets being sent (ERROR after OK or EOF) following a KILL QUERY statement. (Bug#6804)

  • Retrieving from a view defined as a SELECT that mixed UNION ALL and UNION DISTINCT resulted in a different result than retrieving from the original SELECT. (Bug#6565)

  • Fixed a problem with non-optimal index_merge query execution plans being chosen on IRIX. (Bug#8578)

  • BIT in column definitions now is a distinct data type; it no longer is treated as a synonym for TINYINT(1).

  • Bit-field values can be written using b'value' notation. value is a binary value written using 0s and 1s.

  • From the Windows distribution, predefined accounts without passwords for remote users ("root@%", "@%") were removed (other distributions never had them).

  • Added mysql_library_init() and mysql_library_end() as synonyms for the mysql_server_init() and mysql_server_end() C API functions. mysql_library_init() and mysql_library_end() are #define symbols, but the names more clearly indicate that they should be called when beginning and ending use of a MySQL C API library no matter whether the application uses libmysqlclient or libmysqld. (Bug#6149)

  • SHOW COLUMNS now displays NO rather than blank in the Null output column if the corresponding table column cannot be NULL.

  • Changed XML format for mysql from <col_name>col_value</col_name> to <field name="col_name">col_value</field> to allow for proper encoding of column names that are not legal as element names. (Bug#7811)

  • Added --innodb-checksums and --innodb-doublewrite options for mysqld.

  • Added --large-pages option for mysqld.

  • Added multi_read_range system variable.

  • SHOW DATABASES, SHOW TABLES, SHOW COLUMNS, and so forth display information about the INFORMATION_SCHEMA database. Also, several SHOW statements now accept a WHERE clause specifying which output rows to display. See Chapter 20, The INFORMATION_SCHEMA Database.

  • Added the CREATE ROUTINE and ALTER ROUTINE privileges, and made the EXECUTE privilege operational.

  • InnoDB: Corrected a bug in the crash recovery of ROW_FORMAT=COMPACT tables that caused corruption. (Bug#7973) There may still be bugs in the crash recovery, especially in COMPACT tables.

  • When the MyISAM storage engine detects corruption of a MyISAM table, a message describing the problem now is written to the error log.

  • InnoDB: When MySQL/InnoDB is compiled on Mac OS X 10.2 or earlier, detect the operating system version at run time and use the fcntl() file flush method on Mac OS X versions 10.3 and later. In Mac OS X, fsync() does not flush the write cache in the disk drive, but the special fcntl() does; however, the flush request is ignored by some external devices. Failure to flush the buffers may cause severe database corruption at power outages.

  • InnoDB: Implemented fast TRUNCATE TABLE. The old approach (deleting rows one by one) may be used if the table is being referenced by foreign keys. (Bug#7150)

  • Added cp932 (SJIS for Windows Japanese) and eucjpms (UJIS for Windows Japanese) character sets.

  • Added several InnoDB status variables. See Section 5.2.5, “Status Variables”.

  • Added the FEDERATED storage engine. See Section 14.7, “The FEDERATED Storage Engine”.

  • SHOW CREATE TABLE now uses USING index_type rather than TYPE index_type to specify an index type. (Bug#7233)

  • InnoDB now supports a fast TRUNCATE TABLE. One visible change from this is that auto-increment values for this table are reset on TRUNCATE.

  • Added an error member to the MYSQL_BIND data structure that is used in the C API for prepared statements. This member is used for reporting data truncation errors. Truncation reporting is enabled via the new MYSQL_REPORT_DATA_TRUNCATION option for the mysql_options() C API function.

  • API change: the reconnect flag in the MYSQL structure is now set to 0 by mysql_real_connect(). Only those client programs which didn't explicitly set this flag to 0 or 1 after mysql_real_connect() experience a change. Having automatic reconnection enabled by default was considered too dangerous (after reconnection, table locks, temporary tables, user and session variables are lost).

  • FLUSH TABLES WITH READ LOCK is now killable while it's waiting for running COMMIT statements to finish.

  • MEMORY (HEAP) can have VARCHAR() fields.

  • VARCHAR columns now remember end space. A VARCHAR() column can now contain up to 65535 bytes. For more details, see Section E.1, “Changes in release 5.0.x (Production)”. If the table handler doesn't support the new VARCHAR type, then it's converted to a CHAR column. Currently this happens for NDB tables.

  • InnoDB: Introduced a compact record format that does not store the number of columns or the lengths of fixed-size columns. The old format can be requested by specifying ROW_FORMAT=REDUNDANT. The new format (ROW_FORMAT=COMPACT) is the default. The new format typically saves 20 % of disk space and memory.

  • InnoDB: Setting the initial AUTO_INCREMENT value for an InnoDB table using CREATE TABLE ... AUTO_INCREMENT = n now works, and ALTER TABLE ... AUTO_INCREMENT = n resets the current value.

  • Seconds_Behind_Master is NULL (which means “unknown”) if the slave SQL thread is not running, or if the slave I/O thread is not running or not connected to master. It is zero if the SQL thread has caught up to the I/O thread. It no longer grows indefinitely if the master is idle.

  • The MySQL server aborts immediately instead of simply issuing a warning if it is started with the --log-bin option but cannot initialize the binary log at startup (that is, an error occurs when writing to the binary log file or binary log index file).

  • The binary log file and binary log index file now are handled the same way as MyISAM tables when there is a “disk full” or “quota exceeded” error. See Section B.1.4.3, “How MySQL Handles a Full Disk”.

  • The MySQL server now aborts when started with the option --log-bin-index and without --log-bin, and when started with --log-slave-updates and without --log-bin.

  • If the MySQL server is started without an argument to --log-bin and without --log-bin-index, thus not providing a name for the binary log index file, a warning is issued because MySQL falls back to using the hostname for that name, and this is prone to replication issues if the server's hostname's gets changed later. See Section B.1.8.1, “Open Issues in MySQL”.

  • Added account-specific MAX_USER_CONNECTIONS limit, which allows you to specify the maximum number of concurrent connections for the account. Also, all limited resources now are counted per account (instead of being counted per user + host pair as it was before). Use the --old-style-user-limits option to get the old behavior.

  • InnoDB: A shared record lock (LOCK_REC_NOT_GAP) is now taken for a matching record in the foreign key check because inserts can be allowed into gaps.

  • InnoDB: Relaxed locking in INSERT…SELECT, single table UPDATE…SELECT and single table DELETE…SELECT clauses when innodb_locks_unsafe_for_binlog is used and isolation level of the transaction is not serializable. InnoDB uses consistent read in these cases for a selected table.

  • Added a new global system variable slave_transaction_retries: if the replication slave SQL thread fails to execute a transaction because of an InnoDB deadlock or exceeded InnoDB's innodb_lock_wait_timeout or NDBCluster's TransactionDeadlockDetectionTimeout or TransactionInactiveTimeout, it automatically retries slave_transaction_retries times before stopping with an error. The default is 10. (Bug#8325)

  • When a client releases a user-level lock, DO RELEASE_LOCK() will not be written to the binary log anymore (this makes the binary log smaller); as a counterpart, the slave does not actually take the lock when it executes GET_LOCK(). This is mainly an optimization and should not affect existing setups. (Bug#7998)

  • The way the character set information is stored into the binary log was changed, so that it's now possible to have a replication master and slave running with different global character sets. A drawback is that replication from 5.0.3 masters to pre-5.0.3 slaves is impossible.

  • The LOAD DATA statement was extended to support user variables in the target column list, and an optional SET clause. Now one can perform some transformations on data after they have been read and before they are inserted into the table. For example:

    LOAD DATA INFILE 'file.txt'
      INTO TABLE t1
      (column1, @var1)
      SET column2 = @var1/100;

    Also, replication of LOAD DATA was changed, so you can't replicate such statements from a 5.0.3 master to pre-5.0.3 slaves.

  • NDB Cluster: When using this storage engine, the output of SHOW TABLE STATUS now displays properly-calculated values in the Avg_row_length and Data_length columns. (Note that BLOB columns are not yet taken into account.) In addition, the number of replicas is now shown in the Comment column (as number_of_replicas).

Bugs fixed:

  • If a MyISAM table on Windows had INDEX DIRECTORY or DATA DIRECTORY table options, mysqldump dumped the directory pathnames with single-backslash pathname separators. This would cause syntax errors when importing the dump file. mysqldump now changes ‘\’ to ‘/’ in the pathnames on Windows. (Bug#6660)

  • mysql_fix_privilege_tables now fixes that the mysql privilege tables can be used in MySQL 4.1. This allows one to easily downgrade to 4.1 or run MySQL 5.0 and 4.1 with the same privilege files for testing purposes.

  • Fixed bug creating user with GRANT fails with password but works without, (Bug#7905)

  • mysqldump misinterpreted ‘_’ and ‘%’ characters in the names of tables to be dumped as wildcard characters. (Bug#9123)

  • The definition of the enumeration-valued sql_mode column of the mysql.proc table was missing some of the current allowable SQL modes, so stored routines would not necessarily execute with the SQL mode in effect at the time of routine definition. (Bug#8902)

  • REPAIR TABLE did not invalidate query results in the query cache that were generated from the table. (Bug#8480)

  • In strict or traditional SQL mode, too-long string values assigned to string columns (CHAR, VARCHAR, BINARY, VARBINARY, TEXT, or BLOB) were correctly truncated, but the server returned an SQLSTATE value of 01000 (should be 22001). (Bug#6999, Bug#9029)

  • Stored functions that used cursors could return incorrect results. (Bug#8386)

  • AES_DECRYPT(col_name,key) could fail to return NULL for invalid values in col_name, if col_name was declared as NOT NULL. (Bug#8669)

  • Ordering by unsigned expression (more complex than a column reference) was treating the value as signed, producing incorrectly sorted results. (Bug#7425)

  • HAVING was treating unsigned columns as signed. (Bug#7425)

  • Fixed a problem with boolean full-text searches on utf8 columns where a double quote in the search string caused a server crash. (Bug#8351)

  • For a query with both GROUP BY and COUNT(DISTINCT) clauses and a FROM clause with a subquery, NULL was returned for any VARCHAR column selected by the subquery. (Bug#8218)

  • Fixed a bug in TRUNCATE, which did not work within stored procedures. A workaround has been made so that within stored procedures, TRUNCATE is executed like DELETE. This was necessary because TRUNCATE is implicitly locking tables. (Bug#8850)

  • Fixed an optimizer bug that caused incorrectly ordered result from a query that used a FULLTEXT index to retrieve rows and there was another index that was usable for ORDER BY. For such a query, EXPLAIN showed fulltext join type, but regular (not FULLTEXT) index in the Key column. (Bug#6635)

  • If SELECT DISTINCT named an index column multiple times in the select list, the server tried to access different key fields for each instance of the column, which could result in a crash. (Bug#8532)

  • For a stored function that refers to a given table, invoking the function while selecting from the same table resulted in a server crash. (Bug#8405)

  • Comparison of a DECIMAL column containing NULL to a subquery that produced DECIMAL values resulted in a server crash. (Bug#8397)

  • The --set-character-set option for myisamchk was changed to --set-collation. The value needed for specifying how to sort indexes is a collation name, not a character set name. (Bug#8349)

  • Hostname matching didn't work if a netmask was specified for table-specific privileges. (Bug#3309)

  • Corruption of MyISAM table indexes could occur with TRUNCATE TABLE if the table had already been opened. For example, this was possible if the table had been opened implicitly by selecting from a MERGE table that mapped to the MyISAM table. The server now issues an error message for TRUNCATE TABLE under these conditions. (Bug#8306)

  • Setting the connection collation to a value different from the server collation followed by a CREATE TABLE statement that included a quoted default value resulted in a server crash. (Bug#8235)

  • Fixed handling of table-name matching in mysqlhotcopy to accommodate DBD::mysql 2.9003 and up (which implement identifier quoting). (Bug#8136)

  • Selecting from a view defined as a join caused a server crash if the query cache was enabled. (Bug#8054)

  • Results in the query cache generated from a view were not properly invalidated after ALTER VIEW or DROP VIEW on that view. (Bug#8050)

  • FOUND_ROWS() returned an incorrect value after a SELECT SQL_CALC_FOUND_ROWS DISTINCT statement that selected constants and included GROUP BY and LIMIT clauses. (Bug#7945)

  • Selecting from an INFORMATION_SCHEMA table combined with a subquery on an INFORMATION_SCHEMA table caused an error with the message Table tbl_name is corrupted. (Bug#8164)

  • Fixed a problem with equality propagation optimization for prepared statements and stored procedures that caused a server crash upon re-execution of the prepared statement or stored procedure. (Bug#8115, Bug#8849)

  • LEFT OUTER JOIN between an empty base table and a view on an empty base table caused a server crash. (Bug#7433)

  • Use of GROUP_CONCAT() in the select list when selecting from a view caused a server crash. (Bug#7116)

  • Use of a view in a correlated subquery that contains HAVING but no GROUP BY caused a server crash. (Bug#6894)

  • Handling by mysql_list_fields() of references to stored functions within views was incorrect and could result in a server crash. (Bug#6814)

  • mysqldump now avoids writing SET NAMES to the dump output if the server is older than version 4.1 and would not understand that statement. (Bug#7997)

  • Fixed problems when selecting from a view that had an EXISTS or NOT EXISTS subquery. Selecting columns by name caused a server crash. With SELECT *, a crash did not occur, but columns in outer query were not resolved properly. (Bug#6394)

  • DDL statements for views were not being written to the binary log (and thus not subject to replication). (Bug#4838)

  • The CHAR() function was not ignoring NULL arguments, contrary to the documentation. (Bug#6317)

  • Creating a table using a name containing a character that is illegal in character_set_client resulted in the character being stripped from the name and no error. The character now is considered an error. (Bug#8041)

  • Fixed a problem with the Cyrillic letters I and SHORT I being treated the same by the utf8_general_ci collation. (Bug#8385)

  • Some INFORMATION_SCHEMA columns that contained catalog identifiers were of type LONGTEXT. These were changed to VARCHAR(N, where N is the appropriate maximum identifier length. (Bug#7215)

  • Some INFORMATION_SCHEMA columns that contained timestamp values were of type VARBINARY. These were changed to TIMESTAMP. (Bug#7217)

  • An expression that tested a case-insensitive character column against string constants that differed in lettercase could fail because the constants were treated as having a binary collation. (For example, WHERE city='London' AND city='london' could fail.) (Bug#7098, Bug#8690)

  • The output of the STATUS (\s) command in mysql had the values for the server and client character sets reversed. (Bug#7571)

  • If the slave was running with --replicate-*-table options which excluded one temporary table and included another, and the two tables were used in a single DROP TEMPORARY TABLE IF EXISTS statement, as the ones the master automatically writes to its binary log upon client's disconnection when client has not explicitly dropped these, the slave could forget to delete the included replicated temporary table. Only the slave needs to be upgraded. (Bug#8055)

  • When setting integer system variables to a negative value with SET VARIABLES, the value was treated as a positive value modulo 232. (Bug#6958)

  • Corrected a problem with references to DUAL where statements such as SELECT 1 AS a FROM DUAL would succeed but statements such as SELECT 1 AS a FROM DUAL LIMIT 1 would fail. (Bug#8023)

  • Fixed a server crash caused by DELETE FROM tbl_name ... WHERE ... ORDER BY tbl_name.col_name when the ORDER BY column was qualified with the table name. (Bug#8392)

  • Fixed a bug in MATCH ... AGAINST in natural language mode that could cause a server crash if the FULLTEXT index was not used in a join (EXPLAIN did not show fulltext join mode) and the search query matched no rows in the table (Bug#8522).

  • InnoDB: Honor the --tmpdir startup option when creating temporary files. Previously, InnoDB temporary files were always created in the temporary directory of the operating system. On Netware, InnoDB will continue to ignore --tmpdir. (Bug#5822)

  • Platform and architecture information in version information produced for --version option on Windows was always Win95/Win98 (i32). More accurately determine platform as Win32 or Win64 for 32-bit or 64-bit Windows, and architecture as ia32 for x86, ia64 for Itanium, and axp for Alpha. (Bug#4445)

  • If multiple semicolon-separated statements were received in a single packet, they were written to the binary log as a single event rather than as separate per-statement events. For a server serving as a replication master, this caused replication to fail when the event was sent to slave servers. (Bug#8436)

  • Fixed LOAD INDEX statement to actually load index in memory. (Bug#8452)

  • Fixed a failure of multiple-table updates to replicate properly on slave servers when --replicate-*-table options had been specified. (Bug#7011)

  • Fixed failure of CREATE TABLE ... LIKE Windows when the source or destination table was located in a symlinked database directory. (Bug#6607)

  • With lower_case_table_names set to 1, mysqldump on Windows could write the same table name in different lettercase for different SQL statements. Fixed so that consistent lettercase is used. (Bug#5185)

  • mysqld_safe now understands the --help option. Previously, it ignored the option and attempted to start the server anyway. (Bug#7931)

  • Fixed problem in NO_BACKSLASH_ESCAPES SQL mode for strings that contained both the string quoting character and backslash. (Bug#6368)

  • Fixed some portability issues with overflow in floating point values.

  • Prepared statements now gives warnings on prepare.

  • Fixed bug in prepared statements with SUM(DISTINCT...).

  • Fixed bug in prepared statements with OUTER JOIN.

  • Fixed a bug in CONV() function returning unsigned BIGINT number (third argument is positive, and return value does not fit in 32 bits). (Bug#7751)

  • Fixed a failure of the IN() operator to return correct result if all values in the list were constants and some of them were using substring functions, for example, LEFT(), RIGHT(), or MID(). (Bug#7716)

  • Fixed a crash in CONVERT_TZ() function when its second or third argument was from a const table (see Section 7.2.1, “Optimizing Queries with EXPLAIN). (Bug#7705)

  • Fixed a problem with calculation of number of columns in row comparison against subquery. (Bug#8020)

  • Fixed erroneous output resulting from SELECT DISTINCT combined with a subquery and GROUP BY. (Bug#7946)

  • Fixed server crash in comparing a nested row expression (for example row(1,(2,3))) with a subquery. (Bug#8022)

  • Fixed server crash resulting from certain correlated subqueries with forward references (references to an alias defined later in the outer query). (Bug#8025)

  • Fixed server crash resulting from re-execution of prepared statements containing subqueries. (Bug#8125)

  • Fixed a bug where ALTER TABLE improperly would accept an index on a TIMESTAMP column that CREATE TABLE would reject. (Bug#7884)

  • SHOW CREATE TABLE now reports ENGINE=MEMORY rather than ENGINE=HEAP for a MEMORY table (unless the MYSQL323 SQL mode is enabled). (Bug#6659)

  • Fixed a bug where the use of GROUP_CONCAT() with HAVING caused a server crash. (Bug#7769)

  • Fixed a bug where comparing the result of a subquery to a non-existent column caused a server crash on Windows. (Bug#7885)

  • Fixed a bug in a combination of -not and trunc* operators of full-text search. Using more than one truncated negative search term, was causing empty result set.

  • InnoDB: Corrected the handling of trailing spaces in the ucs2 character set. (Bug#7350, Bug#8771)

  • InnoDB: Use native tmpfile() function on Netware. All InnoDB temporary files are created under sys:\tmp. Previously, InnoDB temporary files were never deleted on Netware.

  • Fixed a bug in max_heap_table_size handling, that resulted in Table is full error when the table was still smaller than the limit. (Bug#7791).

  • Fixed a symlink vulnerability in the mysqlaccess script. Reported by Javier Fernandez-Sanguino Pena and Debian Security Audit Team. (CVE-2005-0004)

  • Fixed a bug that caused server crash if some error occurred during filling of temporary table created for derived table or view handling. (Bug#7413)

  • Fixed a bug which caused server crash if query containing CONVERT_TZ() function with constant arguments was prepared. (Bug#6849)

  • Prevent adding CREATE TABLE .. SELECT query to the binary log when the insertion of new records partially failed. (Bug#6682)

  • Fixed a bug which caused a crash when only the slave I/O thread was stopped and started. (Bug#6148)

  • Giving mysqld a SIGHUP caused it to crash.

  • Changed semantics of CREATE/ALTER/DROP DATABASE statements so that replication of CREATE DATABASE is possible when using --binlog-do-db and --binlog-ignore-db. (Bug#6391)

  • A sequence of BEGIN (or SET AUTOCOMMIT=0), FLUSH TABLES WITH READ LOCK, transactional update, COMMIT, FLUSH TABLES WITH READ LOCK could hang the connection forever and possibly the MySQL server itself. This happened for example when running the innobackup script several times. (Bug#6732)

  • mysqlbinlog did not print SET PSEUDO_THREAD_ID statements in front of LOAD DATA INFILE statements inserting into temporary tables, thus causing potential problems when rolling forward these statements after restoring a backup. (Bug#6671)

  • InnoDB: Fixed a bug no error message for ALTER with InnoDB and AUTO_INCREMENT (Bug#7061). InnoDB now supports ALTER TABLE...AUTO_INCREMENT = x query to set auto increment value for a table.

  • Made the MySQL server accept executing SHOW CREATE DATABASE even if the connection has an open transaction or locked tables; refusing it made mysqldump --single-transaction sometimes fail to print a complete CREATE DATABASE statement for some dumped databases. (Bug#7358)

  • Fixed that, when encountering a “disk full” or “quota exceeded” write error, MyISAM sometimes didn't sleep and retry the write, thus resulting in a corrupted table. (Bug#7714)

  • Fixed that --expire-log-days was not honored if using only transactions. (Bug#7236)

  • Fixed that a slave could crash after replicating many ANALYZE TABLE, OPTIMIZE TABLE, or REPAIR TABLE statements from the master. (Bug#6461, Bug#7658)

  • mysqlbinlog forgot to add backquotes around the collation of user variables (causing later parsing problems as BINARY is a reserved word). (Bug#7793)

  • Ensured that mysqldump --single-transaction sets its transaction isolation level to REPEATABLE READ before proceeding (otherwise if the MySQL server was configured to run with a default isolation level lower than REPEATABLE READ it could give an inconsistent dump). (Bug#7850)

  • Fixed that when using the RPAD() function (or any function adding spaces to the right) in a query that had to be resolved by using a temporary table, all resulting strings had rightmost spaces removed (that is, RPAD() did not work) (Bug#4048)

  • Fixed that a 5.0.3 slave can connect to a master < 3.23.50 without hanging (the reason for the hang is a bug in these quite old masters -- SELECT @@unknown_var hangs them -- which was fixed in MySQL 3.23.50). (Bug#7965)

  • InnoDB: Fixed a deadlock without any locking, simple select and update (Bug#7975). InnoDB now takes an exclusive lock when INSERT ON DUPLICATE KEY UPDATE is checking duplicate keys.

  • Fixed a bug where MySQL was allowing concurrent updates (inserts, deletes) to a table if binary logging is enabled. Changed to ensure that all updates are executed in a serialized fashion, because they are executed serialized when binlog is replayed. (Bug#7879)

  • Fixed a rare race condition which could lead to FLUSH TABLES WITH READ LOCK hanging. (Bug#8682)

  • Fixed a bug in replication that caused the master to stamp generated statements (such as SET commands) with an error_code intended only for another statement. This could happen, for example, when a statements generates a duplicate key error on the master but must be replicated. (Bug#8412)

E.1.28. Changes in release 5.0.2 (01 December 2004)

Functionality added or changed:

  • Warning: Incompatible change! The precedence of NOT operator has changed so that expressions such as NOT a BETWEEN b AND c are parsed correctly as NOT (a BETWEEN b AND c) rather than as (NOT a) BETWEEN b AND c. The pre-5.0 higher-precedence behavior can be obtained by enabling the new HIGH_NOT_PRECEDENCE SQL mode.

  • Warning: Incompatible change! SHOW STATUS now shows the session (thread-specific) status variables and SHOW GLOBAL STATUS shows the status variables for the whole server.

    Before MySQL 5.0.2, SHOW STATUS returned global status values. Because the default as of 5.0.2 is to return session values, this is incompatible with previous versions. To issue a SHOW STATUS statement that will retrieve global status values for all versions of MySQL, write it like this:

    SHOW /*!50002 GLOBAL */ STATUS;
  • Added support for the INFORMATION_SCHEMAinformation database” that provides database metadata. See Chapter 20, The INFORMATION_SCHEMA Database.

  • A HAVING clause in a SELECT statement now can refer to columns in the GROUP BY clause, as required by standard SQL.

  • Added the CREATE USER and RENAME USER statements.

  • Modify DROP USER so that it drops the account, including all its privileges. Formerly, it removed the account record only for an account that had all privileges revoked.

  • Added IS [NOT] boolean_value syntax, where boolean_value is TRUE, FALSE, or UNKNOWN.

  • Added several InnoDB status variables. See Section 5.2.5, “Status Variables”.

  • Implemented the WITH CHECK OPTION clause for CREATE VIEW.

  • CHECK TABLE now works for views.

  • The SCHEMA and SCHEMAS keywords are now accepted as synonyms for DATABASE and DATABASES.

  • Added initial support for rudimentary triggers (the CREATE TRIGGER and DROP TRIGGER statements).

  • Added basic support for read-only server side cursors.

  • mysqldump --single-transaction --master-data is now able to take an online (non-blocking) dump of InnoDB and report the corresponding binary log coordinates, which makes a backup suitable for point-in-time recovery, roll-forward or replication slave creation. See Section 8.13, “mysqldump — A Database Backup Program”.

  • Added --start-datetime, --stop-datetime, --start-position, --stop-position options to mysqlbinlog (makes point-in-time recovery easier).

  • Made the MySQL server not react to signals SIGHUP and SIGQUIT on Mac OS X 10.3. This is needed because under this OS, the MySQL server receives lots of these signals (reported as Bug#2030).

  • New --auto-increment-increment and --auto-increment-offset startup options. These allow you to set up a server to generate auto-increment values that don't conflict with another server.

  • MySQL now by default checks dates and in strict mode allows only fully correct dates. If you want MySQL to behave as before, you should enable the new ALLOW_INVALID_DATES SQL mode.

  • Added STRICT_TRANS_TABLES, STRICT_ALL_TABLES, NO_ZERO_IN_DATE, NO_ZERO_DATE, ERROR_FOR_DIVISION_BY_ZERO, and TRADITIONAL SQL modes. The TRADITIONAL mode is shorthand for all the preceding modes. When using mode TRADITIONAL, MySQL generates an error if you try to insert a wrong value in a column. It does not adjust the value to the closest possible legal value.

  • MySQL now remembers which columns were declared to have default values. In STRICT_TRANS_TABLES/STRICT_ALL_TABLES mode, you now get an error if you do an INSERT without specifying all columns that don't have a default value. A side effect of this is that when you do SHOW CREATE for a new table, you no longer see a DEFAULT value for a column for which you didn't specify a default value.

  • The compilation flag DONT_USE_DEFAULT_FIELDS was removed because you can get the same behavior by setting the sql_mode system variable to STRICT_TRANS_TABLES.

  • Added NO_AUTO_CREATE_USER SQL mode to prevent GRANT from automatically creating new users if it would otherwise do so, unless a password also is specified.

  • We now detect too-large floating point numbers during statement parsing and generate an error messages for them.

  • Renamed the sql_updatable_view_key system variable to updatable_views_with_limit. This variable now can have only two values:

    • 1 or YES: Don't issue an error message (warning only) if a VIEW without presence of a key in the underlying table is used in queries with a LIMIT clause for updating. (This is the default value.)

    • 0 or NO: Prohibit update of a VIEW, which does not contain a key in the underlying table and the query uses a LIMIT clause (usually get from GUI tools).

  • Reverted output format of SHOW TABLES to old pre-5.0.1 format that did not include a table type column. To get the additional column that lists the table type, use SHOW FULL TABLES now.

  • The mysql_fix_privilege_tables script now initializes the global CREATE VIEW and SHOW VIEW privileges in the user table to the value of the CREATE privilege in that table.

  • If the server finds that the user table has not been upgraded to include the view-related privilege columns, it treats each account as having view privileges that are the same as its CREATE privilege.

  • InnoDB: If you specify the option innodb_locks_unsafe_for_binlog in my.cnf, InnoDB in an UPDATE or a DELETE only locks the rows that it updates or deletes. This greatly reduces the probability of deadlocks.

  • A connection doing a rollback now displays "Rolling back" in the State column of SHOW PROCESSLIST.

  • mysqlbinlog now prints an informative commented line (thread id, timestamp, server id, and so forth) before each LOAD DATA INFILE, like it does for other queries; unless --short-form is used.

  • Two new server system variables were introduced. auto_increment_increment and auto_increment_offset can be set locally or globally, and are intended for use in controlling the behavior of AUTO_INCREMENT columns in master-to-master replication. Note that these variables are not intended to take the place of sequences. See Section 5.2.3, “System Variables”.

Bugs fixed:

  • Fixed that mysqlbinlog --read-from-remote-server sometimes couldn't accept two binary log files on the command line. (Bug#4507)

  • Fixed that mysqlbinlog --position --read-from-remote-server had incorrect # at lines. (Bug#4506)

  • Fixed that CREATE TABLE ... TYPE=HEAP ... AS SELECT... caused replication slave to stop. (Bug#4971)

  • Fixed that mysql_options(...,MYSQL_OPT_LOCAL_INFILE,...) failed to disable LOAD DATA LOCAL INFILE. (Bug#5038)

  • Fixed that disable-local-infile option had no effect if client read it from a configuration file using mysql_options(...,MYSQL_READ_DEFAULT,...). (Bug#5073)

  • Fixed that SET GLOBAL SYNC_BINLOG did not work on some platforms (Mac OS X). (Bug#5064)

  • Fixed that mysql-test-run failed on the rpl_trunc_binlog test if running test from the installed (the target of 'make install') directory. (Bug#5050)

  • Fixed that mysql-test-run failed on the grant_cache test when run as Unix user 'root'. (Bug#4678)

  • Fixed an unlikely deadlock which could happen when using KILL. (Bug#4810)

  • Fixed a crash when one connection got KILLed while it was doing START SLAVE. (Bug#4827)

  • Made FLUSH TABLES WITH READ LOCK block COMMIT if server is running with binary logging; this ensures that the binary log position can be trusted when doing a full backup of tables and the binary log. (Bug#4953)

  • Fixed that the counter of an auto_increment column was not reset by TRUNCATE TABLE is the table was a temporary one. (Bug#5033)

  • Fixed slave SQL thread so that the SET COLLATION_SERVER... statements it replicates don't advance its position (so that if it gets interrupted before the actual update query, it later redoes the SET). (Bug#5705)

  • Fixed that if the slave SQL thread found a syntax error in a query (which should be rare, as the master parsed it successfully), it stops. (Bug#5711)

  • Fixed that if a write to a MyISAM table fails because of a full disk or an exceeded disk quota, it prints a message to the error log every 10 minutes, and waits until disk becomes free. (Bug#3248)

  • Fixed problem introduced in 4.0.21 where a connection starting a transaction, doing updates, then FLUSH TABLES WITH READ LOCK, then COMMIT, would cause replication slaves to stop (complaining about error 1223). Bug surfaced when using the InnoDB innobackup script. (Bug#5949)

  • OPTIMIZE TABLE, REPAIR TABLE, and ANALYZE TABLE are now replicated without any error code in the binary log. (Bug#5551)

  • If a connection had an open transaction but had done no updates to transactional tables (for example if had just done a SELECT FOR UPDATE then executed a non-transactional update, that update automatically committed the transaction (thus releasing InnoDB's row-level locks etc). (Bug#5714)

  • If a connection was interrupted by a network error and did a rollback, the network error code got stored into the BEGIN and ROLLBACK binary log events; that caused superfluous slave stops. (Bug#6522)

  • Fixed a bug which prevented mysqlbinlog from being able to read from stdin, for example, when piping the output from zcat to mysqlbinlog. (Bug#7853)

E.1.29. Changes in release 5.0.1 (27 July 2004)

Note: This build passes our test suite and fixes a lot of reported bugs found in the previous 5.0.0 release. However, please be aware that this is not a “standard MySQL build” in the sense that there are still some open critical bugs in our bugs database at that affect this release as well. We are actively fixing these and will make a new release where these are fixed as soon as possible. However, this binary should be a good candidate for testing new MySQL 5.0 features for future products.

Functionality added or changed:

  • Warning: Incompatible change! C API change: mysql_shutdown() now requires a second argument. This is a source-level incompatibility that affects how you compile client programs; it does not affect the ability of compiled clients to communicate with older servers. See Section, “mysql_shutdown().

  • When installing a MySQL server as a Windows service, the installation command can include a --local-service option following the service name to cause the server to run using the LocalService Windows account that has limited privileges. This is in addition to the --defaults-file option that also can be given following the service name.

  • Added support for read-only and updatable views based on a single table or other updatable views. View use requires that you upgrade your grant tables to add the view-related privileges. See Section 5.5.4, “mysql_fix_privilege_tables — Upgrade MySQL System Tables”.

  • Implemented a new “greedy search” optimizer that can significantly reduce the time spent on query optimization for some many-table joins. (You are affected if not only some particular SELECT is slow, but even using EXPLAIN for it takes a noticeable amount of time.) Two new system variables, optimizer_search_depth and optimizer_prune_level, can be used to fine-tune optimizer behavior.

  • A stored procedure is no longer “global.” That is, it now belongs to a specific database:

    • When a database is dropped, all routines belonging to that database are also dropped.

    • Procedure names may be qualified, for example, db.p()

    • When executed from another database, an implicit USE db_name is in effect.

    • Explicit USE db_name statements no longer are allowed in a stored procedure.

    See Chapter 17, Stored Procedures and Functions.

  • Fixed SHOW TABLES output field name and values according to standard. Field name changed from Type to table_type, values are BASE TABLE, VIEW and ERROR. (Bug#4603)

  • Added the sql_updatable_view_key system variable.

  • Added the --replicate-same-server-id server option.

  • Added Last_query_cost status variable that reports optimizer cost for last compiled query.

  • Added the --to-last-log option to mysqlbinlog, for use in conjunction with --read-from-remote-server.

  • Added the --innodb-safe-binlog server option, which adds consistency guarantees between the content of InnoDB tables and the binary log. See Section 5.11.3, “The Binary Log”.

  • OPTIMIZE TABLE for InnoDB tables is now mapped to ALTER TABLE instead of ANALYZE TABLE. This rebuilds the table, which updates index statistics and frees space in the clustered index.

  • sync_frm is now a settable global variable (not only a startup option).

  • For replication of MEMORY (HEAP) tables: Made the master automatically write a DELETE FROM statement to its binary log when a MEMORY table is opened for the first time since master's startup. This is for the case where the slave has replicated a non-empty MEMORY table, then the master is shut down and restarted: the table is now empty on master; the DELETE FROM empties it on slave too. Note that even with this fix, between the master's restart and the first use of the table on master, the slave still has out-of-date data in the table. But if you use the --init-file option to populate the MEMORY table on the master at startup, it ensures that the failing time interval is zero. (Bug#2477)

  • When a session having open temporary tables terminates, the statement automatically written to the binary log is now DROP TEMPORARY TABLE IF EXISTS instead of DROP TEMPORARY TABLE, for more robustness.

  • The MySQL server now returns an error if SET SQL_LOG_BIN is issued by a user without the SUPER privilege (in previous versions it just silently ignored the statement in this case).

  • Changed that when the MySQL server has binary logging disabled (that is, no --log-bin option was used), then no transaction binary log cache is allocated for connections. This should save binlog_cache_size bytes of memory (32KB by default) for every connection.

  • Added the sync_binlog=N global variable and startup option, which makes the MySQL server synchronize its binary log to disk (fdatasync()) after every Nth write to the binary log.

  • Changed the slave SQL thread to print less useless error messages (no more message duplication; no more messages when an error is skipped because of slave-skip-errors).

  • DROP DATABASE IF EXISTS, DROP TABLE IF EXISTS, single-table DELETE, and single-table UPDATE now are written to the binary log even if they changed nothing on the master (for example, even if a DELETE matched no rows). The old behavior sometimes caused bad surprises in replication setups.

  • Replication and mysqlbinlog now have better support for the case that the session character set and collation variables are changed within a given session. See Section 6.7, “Replication Features and Known Problems”.

  • Killing a CHECK TABLE statement does not result in the table being marked as “corrupted” any more; the table remains as if CHECK TABLE had not even started. See Section, “KILL Syntax”.

Bugs fixed:

  • Strange results with index (x, y) ... WHERE x=val_1 AND y>=val_2 ORDER BY pk; (Bug#3155)

  • Adding ORDER BY to a query that uses a subquery can cause incorrect results. (Bug#3118)

  • ALTER DATABASE caused the client to hang if the database did not exist. (Bug#2333)

  • SLAVE START (which is a deprecated syntax, START SLAVE should be used instead) could crash the slave. (Bug#2516)

  • Multiple-table DELETE statements were never replicated by the slave if there were any --replicate-*-table options. (Bug#2527)

  • The MySQL server did not report any error if a statement (submitted through mysql_real_query() or mysql_stmt_prepare()) was terminated by garbage characters. This can happen if you pass a wrong length parameter to these functions. The result was that the garbage characters were written into the binary log. (Bug#2703)

  • Replication: If a client connects to a slave server and issues an administrative statement for a table (for example, OPTIMIZE TABLE or REPAIR TABLE), this could sometimes stop the slave SQL thread. This does not lead to any corruption, but you must use START SLAVE to get replication going again. (Bug#1858)

  • Made clearer the error message that one gets when an update is refused because of the --read-only option. (Bug#2757)

  • Fixed that --replicate-wild-*-table rules apply to ALTER DATABASE when the table pattern is %, as is the case for CREATE DATABASE and DROP DATABASE. (Bug#3000)

  • Fixed that when a Rotate event is found by the slave SQL thread in the middle of a transaction, the value of Relay_Log_Pos in SHOW SLAVE STATUS remains correct. (Bug#3017)

  • Corrected the master's binary log position that InnoDB reports when it is doing a crash recovery on a slave server. (Bug#3015)

  • Changed the column Seconds_Behind_Master in SHOW SLAVE STATUS to never show a value of -1. (Bug#2826)

  • Changed that when a DROP TEMPORARY TABLE statement is automatically written to the binary log when a session ends, the statement is recorded with an error code of value zero (this ensures that killing a SELECT on the master does not result in a superfluous error on the slave). (Bug#3063)

  • Changed that when a thread handling INSERT DELAYED (also known as a delayed_insert thread) is killed, its statements are recorded with an error code of value zero (killing such a thread does not endanger replication, so we thus avoid a superfluous error on the slave). (Bug#3081)

  • Fixed deadlock when two START SLAVE commands were run at the same time. (Bug#2921)

  • Fixed that a statement never triggers a superfluous error on the slave, if it must be excluded given the --replicate-* options. The bug was that if the statement had been killed on the master, the slave would stop. (Bug#2983)

  • The --local-load option of mysqlbinlog now requires an argument.

  • Fixed a segmentation fault when running LOAD DATA FROM MASTER after RESET SLAVE. (Bug#2922)

  • mysqlbinlog --read-from-remote-server read all binary logs following the one that was requested. It now stops at the end of the requested file, the same as it does when reading a local binary log. There is an option --to-last-log to get the old behavior. (Bug#3204)

  • Fixed mysqlbinlog --read-from-remote-server to print the exact positions of events in the "at #" lines. (Bug#3214)

  • Fixed a rare error condition that caused the slave SQL thread spuriously to print the message Binlog has bad magic number and stop when it was not necessary to do so. (Bug#3401)

  • mysqlbinlog failed to print a USE statement under rare circumstances where the binary log contained a LOAD DATA INFILE statement. (Bug#3415)

  • Fixed memory corruption occurring when replicating a LOAD DATA INFILE from a master running MySQL version 3.23. (Bug#3422)

  • Multiple-table DELETE statements were always replicated by the slave if there were some --replicate-*-ignore-table options and no --replicate-*-do-table options. (Bug#3461)

  • Fixed a crash of the MySQL slave server when it was built with --with-debug and replicating itself. (Bug#3568)

  • Fixed that in some replication error messages, a very long query caused the rest of the message to be invisible (truncated), by putting the query last in the message. (Bug#3357)

  • If server-id was not set using startup options but with SET GLOBAL, the replication slave still complained that it was not set. (Bug#3829)

  • mysql_fix_privilege_tables didn't correctly handle the argument of its --password=password_val option. (Bug#4240)

  • Fixed potential memory overrun in mysql_real_connect() (which required a compromised DNS server and certain operating systems). (Bug#4017, CVE-2004-0836)

  • During the installation process of the server RPM on Linux, mysqld was run as the root system user, and if you had --log-bin=somewhere_out_of_var_lib_mysql it created binary log files owned by root in this directory, which remained owned by root after the installation. This is now fixed by starting mysqld as the mysql system user instead. (Bug#4038)

  • Made DROP DATABASE honor the value of lower_case_table_names. (Bug#4066)

  • The slave SQL thread refused to replicate INSERT ... SELECT if it examined more than 4 billion rows. (Bug#3871)

  • mysqlbinlog didn't escape the string content of user variables, and did not deal well when these variables were in non-ASCII character sets; this is now fixed by always printing the string content of user variables in hexadecimal. The character set and collation of the string is now also printed. (Bug#3875)

  • Fixed incorrect destruction of expression that led to a server crash on complex AND/OR expressions if query was ignored (either by a replication server because of --replicate-*-table rules, or by any MySQL server because of a syntax error). (Bug#3969, Bug#4494)

  • If CREATE TEMPORARY TABLE t SELECT failed while loading the data, the temporary table was not dropped. (Bug#4551)

  • Fixed that when a multiple-table DROP TABLE failed to drop a table on the master server, the error code was not written to the binary log. (Bug#4553)

  • When the slave SQL thread was replicating a LOAD DATA INFILE statement, it didn't show the statement in the output of SHOW PROCESSLIST. (Bug#4326)

E.1.30. Changes in release 5.0.0 (22 December 2003: Alpha)

Functionality added or changed:

  • The output of the SHOW BINLOG EVENTS statement has been modified. The Orig_log_pos column has been renamed to End_log_pos and now represents the offset of the last byte of the event, plus one.

  • Important note: If you upgrade to MySQL 4.1.1 or higher, it is difficult to downgrade back to 4.0 or 4.1.0! That is because, for earlier versions, InnoDB is not aware of multiple tablespaces.

  • Added support for SUM(DISTINCT), MIN(DISTINCT), and MAX(DISTINCT).

  • The KILL statement now takes CONNECTION and QUERY modifiers. The first is the same as KILL with no modifier (it kills a given connection thread). The second kills only the statement currently being executed by the connection.

  • Added TIMESTAMPADD() and TIMESTAMPDIFF() functions.

  • Added WEEK and QUARTER values as INTERVAL arguments for the DATE_ADD() and DATE_SUB() functions.

  • New binary log format that enables replication of these session variables: sql_mode, SQL_AUTO_IS_NULL, FOREIGN_KEY_CHECKS (which was replicated since 4.0.14, but here it's done more efficiently and takes less space in the binary logs), UNIQUE_CHECKS. Other variables (like character sets, SQL_SELECT_LIMIT, ...) will be replicated in upcoming 5.0.x releases.

  • Implemented Index Merge optimization for OR clauses. See Section 7.2.6, “Index Merge Optimization”.

  • Basic support for stored procedures (SQL:2003 style). See Chapter 17, Stored Procedures and Functions.

  • Added SELECT INTO list_of_vars, which can be of mixed (that is, global and local) types. See Section, “SELECT ... INTO Statement”.

  • Easier replication upgrade (5.0.0 masters can read older binary logs and 5.0.0 slaves can read older relay logs). See Section 6.5, “Replication Compatibility Between MySQL Versions”, for more details). The format of the binary log and relay log is changed compared to that of MySQL 4.1 and older.

  • LOAD DATA INFILE causes an implicit commit. Important: The behaviour of LOAD DATA INFILE in this regard was changed again in MySQL 5.0.26. See Section E.1.2, “Changes in release 5.0.26 (03 October 2006)”.

Bugs fixed:

JavaScript Editor Source code editor     What Is Ajax