JavaScript Editor Javascript debugger      Website design 


Part VI. Function Reference

See also Appendix K, Extension Categorization.

Table of Contents

I. .NET
dotnet_load — Loads a DOTNET module
II. Apache
apache_child_terminate — Terminate apache process after this request
apache_get_modules — Get a list of loaded Apache modules
apache_get_version — Fetch Apache version
apache_getenv — Get an Apache subprocess_env variable
apache_lookup_uri — Perform a partial request for the specified URI and return all info about it
apache_note — Get and set apache request notes
apache_request_headers — Fetch all HTTP request headers
apache_reset_timeout — Reset the Apache write timer
apache_response_headers — Fetch all HTTP response headers
apache_setenv — Set an Apache subprocess_env variable
ascii2ebcdic — Translate string from ASCII to EBCDIC
ebcdic2ascii — Translate string from EBCDIC to ASCII
getallheaders — Fetch all HTTP request headers
virtual — Perform an Apache sub-request
III. APC
apc_add — Cache a variable in the data store (only if it's not stored)
apc_cache_info — Retrieves cached information (and meta-data) from APC's data store
apc_clear_cache — Clears the APC cache
apc_compile_file — Stores a file in the bytecode cache, bypassing all filters.
apc_define_constants — Defines a set of constants for retrieval and mass-definition
apc_delete — Removes a stored variable from the cache
apc_fetch — Fetch a stored variable from the cache
apc_load_constants — Loads a set of constants from the cache
apc_sma_info — Retrieves APC's Shared Memory Allocation information
apc_store — Cache a variable in the data store
IV. APD
apd_breakpoint — Stops the interpreter and waits on a CR from the socket
apd_callstack — Returns the current call stack as an array
apd_clunk — Throw a warning and a callstack
apd_continue — Restarts the interpreter
apd_croak — Throw an error, a callstack and then exit
apd_dump_function_table — Outputs the current function table
apd_dump_persistent_resources — Return all persistent resources as an array
apd_dump_regular_resources — Return all current regular resources as an array
apd_echo — Echo to the debugging socket
apd_get_active_symbols — Get an array of the current variables names in the local scope
apd_set_pprof_trace — Starts the session debugging
apd_set_session_trace — Starts the session debugging
apd_set_session — Changes or sets the current debugging level
apd_set_socket_session_trace — Starts the remote session debugging
override_function — Overrides built-in functions
rename_function — Renames orig_name to new_name in the global function table
V. Arrays
array_change_key_case — Changes all keys in an array
array_chunk — Split an array into chunks
array_combine — Creates an array by using one array for keys and another for its values
array_count_values — Counts all the values of an array
array_diff_assoc — Computes the difference of arrays with additional index check
array_diff_key — Computes the difference of arrays using keys for comparison
array_diff_uassoc — Computes the difference of arrays with additional index check which is performed by a user supplied callback function
array_diff_ukey — Computes the difference of arrays using a callback function on the keys for comparison
array_diff — Computes the difference of arrays
array_fill_keys — Fill an array with values, specifying keys
array_fill — Fill an array with values
array_filter — Filters elements of an array using a callback function
array_flip — Exchanges all keys with their associated values in an array
array_intersect_assoc — Computes the intersection of arrays with additional index check
array_intersect_key — Computes the intersection of arrays using keys for comparison
array_intersect_uassoc — Computes the intersection of arrays with additional index check, compares indexes by a callback function
array_intersect_ukey — Computes the intersection of arrays using a callback function on the keys for comparison
array_intersect — Computes the intersection of arrays
array_key_exists — Checks if the given key or index exists in the array
array_keys — Return all the keys of an array
array_map — Applies the callback to the elements of the given arrays
array_merge_recursive — Merge two or more arrays recursively
array_merge — Merge one or more arrays
array_multisort — Sort multiple or multi-dimensional arrays
array_pad — Pad array to the specified length with a value
array_pop — Pop the element off the end of array
array_product — Calculate the product of values in an array
array_push — Push one or more elements onto the end of array
array_rand — Pick one or more random entries out of an array
array_reduce — Iteratively reduce the array to a single value using a callback function
array_reverse — Return an array with elements in reverse order
array_search — Searches the array for a given value and returns the corresponding key if successful
array_shift — Shift an element off the beginning of array
array_slice — Extract a slice of the array
array_splice — Remove a portion of the array and replace it with something else
array_sum — Calculate the sum of values in an array
array_udiff_assoc — Computes the difference of arrays with additional index check, compares data by a callback function
array_udiff_uassoc — Computes the difference of arrays with additional index check, compares data and indexes by a callback function
array_udiff — Computes the difference of arrays by using a callback function for data comparison
array_uintersect_assoc — Computes the intersection of arrays with additional index check, compares data by a callback function
array_uintersect_uassoc — Computes the intersection of arrays with additional index check, compares data and indexes by a callback functions
array_uintersect — Computes the intersection of arrays, compares data by a callback function
array_unique — Removes duplicate values from an array
array_unshift — Prepend one or more elements to the beginning of an array
array_values — Return all the values of an array
array_walk_recursive — Apply a user function recursively to every member of an array
array_walk — Apply a user function to every member of an array
array — Create an array
arsort — Sort an array in reverse order and maintain index association
asort — Sort an array and maintain index association
compact — Create array containing variables and their values
count — Count elements in an array, or properties in an object
current — Return the current element in an array
each — Return the current key and value pair from an array and advance the array cursor
end — Set the internal pointer of an array to its last element
extract — Import variables into the current symbol table from an array
in_array — Checks if a value exists in an array
key — Fetch a key from an associative array
krsort — Sort an array by key in reverse order
ksort — Sort an array by key
list — Assign variables as if they were an array
natcasesort — Sort an array using a case insensitive "natural order" algorithm
natsort — Sort an array using a "natural order" algorithm
next — Advance the internal array pointer of an array
pos — Alias of current()
prev — Rewind the internal array pointer
range — Create an array containing a range of elements
reset — Set the internal pointer of an array to its first element
rsort — Sort an array in reverse order
shuffle — Shuffle an array
sizeof — Alias of count()
sort — Sort an array
uasort — Sort an array with a user-defined comparison function and maintain index association
uksort — Sort an array by keys using a user-defined comparison function
usort — Sort an array by values using a user-defined comparison function
VI. Aspell
aspell_check_raw — Check a word without changing its case or trying to trim it [deprecated]
aspell_check — Check a word [deprecated]
aspell_new — Load a new dictionary [deprecated]
aspell_suggest — Suggest spellings of a word [deprecated]
VII. BBCode
bbcode_add_element — Adds a bbcode element
bbcode_add_smiley — Adds a smiley to the parser
bbcode_create — Create a BBCode Resource
bbcode_destroy — Close BBCode_container resource
bbcode_parse — Parse a string following a given rule set
bbcode_set_arg_parser — Attach another parser in order to use another rule set for argument parsing
bbcode_set_flags — Set or alter parser options
VIII. BC math
bcadd — Add two arbitrary precision numbers
bccomp — Compare two arbitrary precision numbers
bcdiv — Divide two arbitrary precision numbers
bcmod — Get modulus of an arbitrary precision number
bcmul — Multiply two arbitrary precision number
bcpow — Raise an arbitrary precision number to another
bcpowmod — Raise an arbitrary precision number to another, reduced by a specified modulus
bcscale — Set default scale parameter for all bc math functions
bcsqrt — Get the square root of an arbitrary precision number
bcsub — Subtract one arbitrary precision number from another
IX. bcompiler
bcompiler_load_exe — Reads and creates classes from a bcompiler exe file
bcompiler_load — Reads and creates classes from a bz compressed file
bcompiler_parse_class — Reads the bytecodes of a class and calls back to a user function
bcompiler_read — Reads and creates classes from a filehandle
bcompiler_write_class — Writes an defined class as bytecodes
bcompiler_write_constant — Writes a defined constant as bytecodes
bcompiler_write_exe_footer — Writes the start pos, and sig to the end of a exe type file
bcompiler_write_file — Writes a php source file as bytecodes
bcompiler_write_footer — Writes the single character \x00 to indicate End of compiled data
bcompiler_write_function — Writes an defined function as bytecodes
bcompiler_write_functions_from_file — Writes all functions defined in a file as bytecodes
bcompiler_write_header — Writes the bcompiler header
bcompiler_write_included_filename — Writes an included file as bytecodes
X. Bzip2
bzclose — Close a bzip2 file
bzcompress — Compress a string into bzip2 encoded data
bzdecompress — Decompresses bzip2 encoded data
bzerrno — Returns a bzip2 error number
bzerror — Returns the bzip2 error number and error string in an array
bzerrstr — Returns a bzip2 error string
bzflush — Force a write of all buffered data
bzopen — Opens a bzip2 compressed file
bzread — Binary safe bzip2 file read
bzwrite — Binary safe bzip2 file write
XI. Calendar
cal_days_in_month — Return the number of days in a month for a given year and calendar
cal_from_jd — Converts from Julian Day Count to a supported calendar
cal_info — Returns information about a particular calendar
cal_to_jd — Converts from a supported calendar to Julian Day Count
easter_date — Get Unix timestamp for midnight on Easter of a given year
easter_days — Get number of days after March 21 on which Easter falls for a given year
FrenchToJD — Converts a date from the French Republican Calendar to a Julian Day Count
GregorianToJD — Converts a Gregorian date to Julian Day Count
JDDayOfWeek — Returns the day of the week
JDMonthName — Returns a month name
JDToFrench — Converts a Julian Day Count to the French Republican Calendar
JDToGregorian — Converts Julian Day Count to Gregorian date
jdtojewish — Converts a Julian day count to a Jewish calendar date
JDToJulian — Converts a Julian Day Count to a Julian Calendar Date
jdtounix — Convert Julian Day to Unix timestamp
JewishToJD — Converts a date in the Jewish Calendar to Julian Day Count
JulianToJD — Converts a Julian Calendar date to Julian Day Count
unixtojd — Convert Unix timestamp to Julian Day
XII. CCVS
ccvs_add — Add data to a transaction
ccvs_auth — Perform credit authorization test on a transaction
ccvs_command — Performs a command which is peculiar to a single protocol, and thus is not available in the general CCVS API
ccvs_count — Find out how many transactions of a given type are stored in the system
ccvs_delete — Delete a transaction
ccvs_done — Terminate CCVS engine and do cleanup work
ccvs_init — Initialize CCVS for use
ccvs_lookup — Look up an item of a particular type in the database #
ccvs_new — Create a new, blank transaction
ccvs_report — Return the status of the background communication process
ccvs_return — Transfer funds from the merchant to the credit card holder
ccvs_reverse — Perform a full reversal on an already-processed authorization
ccvs_sale — Transfer funds from the credit card holder to the merchant
ccvs_status — Check the status of an invoice
ccvs_textvalue — Get text return value for previous function call
ccvs_void — Perform a full reversal on a completed transaction
XIII. Classes/Objects
call_user_method_array — Call a user method given with an array of parameters [deprecated]
call_user_method — Call a user method on an specific object [deprecated]
class_exists — Checks if the class has been defined
get_class_methods — Gets the class methods' names
get_class_vars — Get the default properties of the class
get_class — Returns the name of the class of an object
get_declared_classes — Returns an array with the name of the defined classes
get_declared_interfaces — Returns an array of all declared interfaces
get_object_vars — Gets the properties of the given object
get_parent_class — Retrieves the parent class name for object or class
interface_exists — Checks if the interface has been defined
is_a — Checks if the object is of this class or has this class as one of its parents
is_subclass_of — Checks if the object has this class as one of its parents
method_exists — Checks if the class method exists
property_exists — Checks if the object or class has a property
XIV. Classkit
classkit_import — Import new class method definitions from a file
classkit_method_add — Dynamically adds a new method to a given class
classkit_method_copy — Copies a method from class to another
classkit_method_redefine — Dynamically changes the code of the given method
classkit_method_remove — Dynamically removes the given method
classkit_method_rename — Dynamically changes the name of the given method
XV. ClibPDF
cpdf_add_annotation — Adds annotation
cpdf_add_outline — Adds bookmark for current page
cpdf_arc — Draws an arc
cpdf_begin_text — Starts text section
cpdf_circle — Draw a circle
cpdf_clip — Clips to current path
cpdf_close — Closes the pdf document
cpdf_closepath_fill_stroke — Close, fill and stroke current path
cpdf_closepath_stroke — Close path and draw line along path
cpdf_closepath — Close path
cpdf_continue_text — Output text in next line
cpdf_curveto — Draws a curve
cpdf_end_text — Ends text section
cpdf_fill_stroke — Fill and stroke current path
cpdf_fill — Fill current path
cpdf_finalize_page — Ends page
cpdf_finalize — Ends document
cpdf_global_set_document_limits — Sets document limits for any pdf document
cpdf_import_jpeg — Opens a JPEG image
cpdf_lineto — Draws a line
cpdf_moveto — Sets current point
cpdf_newpath — Starts a new path
cpdf_open — Opens a new pdf document
cpdf_output_buffer — Outputs the pdf document in memory buffer
cpdf_page_init — Starts new page
cpdf_place_inline_image — Places an image on the page
cpdf_rect — Draw a rectangle
cpdf_restore — Restores formerly saved environment
cpdf_rlineto — Draws a line
cpdf_rmoveto — Sets current point
cpdf_rotate_text — Sets text rotation angle
cpdf_rotate — Sets rotation
cpdf_save_to_file — Writes the pdf document into a file
cpdf_save — Saves current environment
cpdf_scale — Sets scaling
cpdf_set_action_url — Sets hyperlink
cpdf_set_char_spacing — Sets character spacing
cpdf_set_creator — Sets the creator field in the pdf document
cpdf_set_current_page — Sets current page
cpdf_set_font_directories — Sets directories to search when using external fonts
cpdf_set_font_map_file — Sets fontname to filename translation map when using external fonts
cpdf_set_font — Select the current font face and size
cpdf_set_horiz_scaling — Sets horizontal scaling of text
cpdf_set_keywords — Sets the keywords field of the pdf document
cpdf_set_leading — Sets distance between text lines
cpdf_set_page_animation — Sets duration between pages
cpdf_set_subject — Sets the subject field of the pdf document
cpdf_set_text_matrix — Sets the text matrix
cpdf_set_text_pos — Sets text position
cpdf_set_text_rendering — Determines how text is rendered
cpdf_set_text_rise — Sets the text rise
cpdf_set_title — Sets the title field of the pdf document
cpdf_set_viewer_preferences — How to show the document in the viewer
cpdf_set_word_spacing — Sets spacing between words
cpdf_setdash — Sets dash pattern
cpdf_setflat — Sets flatness
cpdf_setgray_fill — Sets filling color to gray value
cpdf_setgray_stroke — Sets drawing color to gray value
cpdf_setgray — Sets drawing and filling color to gray value
cpdf_setlinecap — Sets linecap parameter
cpdf_setlinejoin — Sets linejoin parameter
cpdf_setlinewidth — Sets line width
cpdf_setmiterlimit — Sets miter limit
cpdf_setrgbcolor_fill — Sets filling color to rgb color value
cpdf_setrgbcolor_stroke — Sets drawing color to rgb color value
cpdf_setrgbcolor — Sets drawing and filling color to rgb color value
cpdf_show_xy — Output text at position
cpdf_show — Output text at current position
cpdf_stringwidth — Returns width of text in current font
cpdf_stroke — Draw line along path
cpdf_text — Output text with parameters
cpdf_translate — Sets origin of coordinate system
XVI. COM
COM — COM class
DOTNET — DOTNET class
VARIANT — VARIANT class
com_addref — Increases the components reference counter [deprecated]
com_create_guid — Generate a globally unique identifier (GUID)
com_event_sink — Connect events from a COM object to a PHP object
com_get_active_object — Returns a handle to an already running instance of a COM object
com_get — Gets the value of a COM Component's property [deprecated]
com_invoke — Calls a COM component's method [deprecated]
com_isenum — Indicates if a COM object has an IEnumVariant interface for iteration [deprecated]
com_load_typelib — Loads a Typelib
com_load — Creates a new reference to a COM component [deprecated]
com_message_pump — Process COM messages, sleeping for up to timeoutms milliseconds
com_print_typeinfo — Print out a PHP class definition for a dispatchable interface
com_propget — Alias of com_get()
com_propput — Alias of com_set()
com_propset — Alias of com_set()
com_release — Decreases the components reference counter [deprecated]
com_set — Assigns a value to a COM component's property
variant_abs — Returns the absolute value of a variant
variant_add — "Adds" two variant values together and returns the result
variant_and — performs a bitwise AND operation between two variants and returns the result
variant_cast — Convert a variant into a new variant object of another type
variant_cat — concatenates two variant values together and returns the result
variant_cmp — Compares two variants
variant_date_from_timestamp — Returns a variant date representation of a Unix timestamp
variant_date_to_timestamp — Converts a variant date/time value to Unix timestamp
variant_div — Returns the result from dividing two variants
variant_eqv — Performs a bitwise equivalence on two variants
variant_fix — Returns the integer portion ? of a variant
variant_get_type — Returns the type of a variant object
variant_idiv — Converts variants to integers and then returns the result from dividing them
variant_imp — Performs a bitwise implication on two variants
variant_int — Returns the integer portion of a variant
variant_mod — Divides two variants and returns only the remainder
variant_mul — multiplies the values of the two variants and returns the result
variant_neg — Performs logical negation on a variant
variant_not — Performs bitwise not negation on a variant
variant_or — Performs a logical disjunction on two variants
variant_pow — Returns the result of performing the power function with two variants
variant_round — Rounds a variant to the specified number of decimal places
variant_set_type — Convert a variant into another type "in-place"
variant_set — Assigns a new value for a variant object
variant_sub — subtracts the value of the right variant from the left variant value and returns the result
variant_xor — Performs a logical exclusion on two variants
XVII. Crack
crack_check — Performs an obscure check with the given password
crack_closedict — Closes an open CrackLib dictionary
crack_getlastmessage — Returns the message from the last obscure check
crack_opendict — Opens a new CrackLib dictionary
XVIII. ctype
ctype_alnum — Check for alphanumeric character(s)
ctype_alpha — Check for alphabetic character(s)
ctype_cntrl — Check for control character(s)
ctype_digit — Check for numeric character(s)
ctype_graph — Check for any printable character(s) except space
ctype_lower — Check for lowercase character(s)
ctype_print — Check for printable character(s)
ctype_punct — Check for any printable character which is not whitespace or an alphanumeric character
ctype_space — Check for whitespace character(s)
ctype_upper — Check for uppercase character(s)
ctype_xdigit — Check for character(s) representing a hexadecimal digit
XIX. CURL
Constants — Curl Predefined Constants
curl_close — Close a cURL session
curl_copy_handle — Copy a cURL handle along with all of its preferences
curl_errno — Return the last error number
curl_error — Return a string containing the last error for the current session
curl_exec — Perform a cURL session
curl_getinfo — Get information regarding a specific transfer
curl_init — Initialize a cURL session
curl_multi_add_handle — Add a normal cURL handle to a cURL multi handle
curl_multi_close — Close a set of cURL handles
curl_multi_exec — Run the sub-connections of the current cURL handle
curl_multi_getcontent — Return the content of a cURL handle if CURLOPT_RETURNTRANSFER is set
curl_multi_info_read — Get information about the current transfers
curl_multi_init — Returns a new cURL multi handle
curl_multi_remove_handle — Remove a multi handle from a set of cURL handles
curl_multi_select — Get all the sockets associated with the cURL extension, which can then be "selected"
curl_setopt_array — Set multiple options for a cURL transfer
curl_setopt — Set an option for a cURL transfer
curl_version — Gets cURL version information
XX. Cybercash
cybercash_base64_decode — base64 decode data for Cybercash
cybercash_base64_encode — base64 encode data for Cybercash
cybercash_decr — Cybercash decrypt
cybercash_encr — Cybercash encrypt
XXI. CyberMUT
cybermut_creerformulairecm — Generate HTML form of request for payment
cybermut_creerreponsecm — Generate the delivery's acknowledgement of the payment's confirmation
cybermut_testmac — Make sure that there was no data diddling contained in the received message of confirmation
XXII. Cyrus IMAP
cyrus_authenticate — Authenticate against a Cyrus IMAP server
cyrus_bind — Bind callbacks to a Cyrus IMAP connection
cyrus_close — Close connection to a Cyrus IMAP server
cyrus_connect — Connect to a Cyrus IMAP server
cyrus_query — Send a query to a Cyrus IMAP server
cyrus_unbind — Unbind ...
XXIII. Date/Time
checkdate — Validate a Gregorian date
date_create — Returns new DateTime object
date_date_set — Sets the date
date_default_timezone_get — Gets the default timezone used by all date/time functions in a script
date_default_timezone_set — Sets the default timezone used by all date/time functions in a script
date_format — Returns date formatted according to given format
date_isodate_set — Sets the ISO date
date_modify — Alters the timestamp
date_offset_get — Returns the daylight saving time offset
date_parse — Returns associative array with detailed info about given date
date_sun_info — Returns an array with information about sunset/sunrise and twilight begin/end
date_sunrise — Returns time of sunrise for a given day and location
date_sunset — Returns time of sunset for a given day and location
date_time_set — Sets the time
date_timezone_get — Return time zone relative to given DateTime
date_timezone_set — Sets the time zone for the DateTime object
date — Format a local time/date
getdate — Get date/time information
gettimeofday — Get current time
gmdate — Format a GMT/UTC date/time
gmmktime — Get Unix timestamp for a GMT date
gmstrftime — Format a GMT/UTC time/date according to locale settings
idate — Format a local time/date as integer
localtime — Get the local time
microtime — Return current Unix timestamp with microseconds
mktime — Get Unix timestamp for a date
strftime — Format a local time/date according to locale settings
strptime — Parse a time/date generated with strftime()
strtotime — Parse about any English textual datetime description into a Unix timestamp
time — Return current Unix timestamp
timezone_abbreviations_list — Returns associative array containing dst, offset and the timezone name
timezone_identifiers_list — Returns numerically index array with all timezone identifiers
timezone_name_from_abbr — Returns the timezone name from abbrevation
timezone_name_get — Returns the name of the timezone
timezone_offset_get — Returns the timezone offset from GMT
timezone_open — Returns new DateTimeZone object
timezone_transitions_get — Returns all transitions for the timezone
XXIV. DB++
dbplus_add — Add a tuple to a relation
dbplus_aql — Perform AQL query
dbplus_chdir — Get/Set database virtual current directory
dbplus_close — Close a relation
dbplus_curr — Get current tuple from relation
dbplus_errcode — Get error string for given errorcode or last error
dbplus_errno — Get error code for last operation
dbplus_find — Set a constraint on a relation
dbplus_first — Get first tuple from relation
dbplus_flush — Flush all changes made on a relation
dbplus_freealllocks — Free all locks held by this client
dbplus_freelock — Release write lock on tuple
dbplus_freerlocks — Free all tuple locks on given relation
dbplus_getlock — Get a write lock on a tuple
dbplus_getunique — Get an id number unique to a relation
dbplus_info — Get information about a relation
dbplus_last — Get last tuple from relation
dbplus_lockrel — Request write lock on relation
dbplus_next — Get next tuple from relation
dbplus_open — Open relation file
dbplus_prev — Get previous tuple from relation
dbplus_rchperm — Change relation permissions
dbplus_rcreate — Creates a new DB++ relation
dbplus_rcrtexact — Creates an exact but empty copy of a relation including indices
dbplus_rcrtlike — Creates an empty copy of a relation with default indices
dbplus_resolve — Resolve host information for relation
dbplus_restorepos — Restore position
dbplus_rkeys — Specify new primary key for a relation
dbplus_ropen — Open relation file local
dbplus_rquery — Perform local (raw) AQL query
dbplus_rrename — Rename a relation
dbplus_rsecindex — Create a new secondary index for a relation
dbplus_runlink — Remove relation from filesystem
dbplus_rzap — Remove all tuples from relation
dbplus_savepos — Save position
dbplus_setindex — Set index
dbplus_setindexbynumber — Set index by number
dbplus_sql — Perform SQL query
dbplus_tcl — Execute TCL code on server side
dbplus_tremove — Remove tuple and return new current tuple
dbplus_undo — Undo
dbplus_undoprepare — Prepare undo
dbplus_unlockrel — Give up write lock on relation
dbplus_unselect — Remove a constraint from relation
dbplus_update — Update specified tuple in relation
dbplus_xlockrel — Request exclusive lock on relation
dbplus_xunlockrel — Free exclusive lock on relation
XXV. dba
dba_close — Close a DBA database
dba_delete — Delete DBA entry specified by key
dba_exists — Check whether key exists
dba_fetch — Fetch data specified by key
dba_firstkey — Fetch first key
dba_handlers — List all the handlers available
dba_insert — Insert entry
dba_key_split — Splits a key in string representation into array representation
dba_list — List all open database files
dba_nextkey — Fetch next key
dba_open — Open database
dba_optimize — Optimize database
dba_popen — Open database persistently
dba_replace — Replace or insert entry
dba_sync — Synchronize database
XXVI. dBase
dbase_add_record — Adds a record to a database
dbase_close — Closes a database
dbase_create — Creates a database
dbase_delete_record — Deletes a record from a database
dbase_get_header_info — Gets the header info of a database
dbase_get_record_with_names — Gets a record from a database as an associative array
dbase_get_record — Gets a record from a database as an indexed array
dbase_numfields — Gets the number of fields of a database
dbase_numrecords — Gets the number of records in a database
dbase_open — Opens a database
dbase_pack — Packs a database
dbase_replace_record — Replaces a record in a database
XXVII. DBM
dblist — Describes the DBM-compatible library being used
dbmclose — Closes a dbm database
dbmdelete — Deletes the value for a key from a DBM database
dbmexists — Tells if a value exists for a key in a DBM database
dbmfetch — Fetches a value for a key from a DBM database
dbmfirstkey — Retrieves the first key from a DBM database
dbminsert — Inserts a value for a key in a DBM database
dbmnextkey
dbmopen — Opens a DBM database
dbmreplace — Replaces the value for a key in a DBM database
XXVIII. dbx
dbx_close — Close an open connection/database
dbx_compare — Compare two rows for sorting purposes
dbx_connect — Open a connection/database
dbx_error — Report the error message of the latest function call in the module
dbx_escape_string — Escape a string so it can safely be used in an sql-statement
dbx_fetch_row — Fetches rows from a query-result that had the DBX_RESULT_UNBUFFERED flag set
dbx_query — Send a query and fetch all results (if any)
dbx_sort — Sort a result from a dbx_query by a custom sort function
XXIX. Direct IO
dio_close — Closes the file descriptor given by fd
dio_fcntl — Performs a c library fcntl on fd
dio_open — Opens a new filename with specified permissions of flags and creation permissions of mode
dio_read — Reads bytes from a file descriptor
dio_seek — Seeks to pos on fd from whence
dio_stat — Gets stat information about the file descriptor fd
dio_tcsetattr — Sets terminal attributes and baud rate for a serial port
dio_truncate — Truncates file descriptor fd to offset bytes
dio_write — Writes data to fd with optional truncation at length
XXX. Directories
chdir — Change directory
chroot — Change the root directory
dir — Return an instance of the Directory class
closedir — Close directory handle
getcwd — Gets the current working directory
opendir — Open directory handle
readdir — Read entry from directory handle
rewinddir — Rewind directory handle
scandir — List files and directories inside the specified path
XXXI. DOM
DOMAttr->__construct() — Creates a new DOMAttr object
DOMAttr->isId() — Checks if attribute is a defined ID
DOMCharacterData->appendData() — Append the string to the end of the character data of the node
DOMCharacterData->deleteData() — Remove a range of characters from the node
DOMCharacterData->insertData() — Insert a string at the specified 16-bit unit offset
DOMCharacterData->replaceData() — Replace a substring within the DOMCharacterData node
DOMCharacterData->substringData() — Extracts a range of data from the node
DOMComment->__construct() — Creates a new DOMComment object
DOMDocument->__construct() — Creates a new DOMDocument object
DOMDocument->createAttribute() — Create new attribute
DOMDocument->createAttributeNS() — Create new attribute node with an associated namespace
DOMDocument->createCDATASection() — Create new cdata node
DOMDocument->createComment() — Create new comment node
DOMDocument->createDocumentFragment() — Create new document fragment
DOMDocument->createElement() — Create new element node
DOMDocument->createElementNS() — Create new element node with an associated namespace
DOMDocument->createEntityReference() — Create new entity reference node
DOMDocument->createProcessingInstruction() — Creates new PI node
DOMDocument->createTextNode() — Create new text node
DOMDocument->getElementById() — Searches for an element with a certain id
DOMDocument->getElementsByTagName() — Searches for all elements with given tag name
DOMDocument->getElementsByTagNameNS() — Searches for all elements with given tag name in specified namespace
DOMDocument->importNode() — Import node into current document
DOMDocument->load() — Load XML from a file
DOMDocument->loadHTML() — Load HTML from a string
DOMDocument->loadHTMLFile() — Load HTML from a file
DOMDocument->loadXML() — Load XML from a string
DOMDocument->normalizeDocument() — Normalizes the document
DOMDocument->registerNodeClass() — Register extended class used to create base node type
DOMDocument->relaxNGValidate() — Performs relaxNG validation on the document
DOMDocument->relaxNGValidateSource() — Performs relaxNG validation on the document
DOMDocument->save() — Dumps the internal XML tree back into a file
DOMDocument->saveHTML() — Dumps the internal document into a string using HTML formatting
DOMDocument->saveHTMLFile() — Dumps the internal document into a file using HTML formatting
DOMDocument->saveXML() — Dumps the internal XML tree back into a string
DOMDocument->schemaValidate() — Validates a document based on a schema
DOMDocument->schemaValidateSource() — Validates a document based on a schema
DOMDocument->validate() — Validates the document based on its DTD
DOMDocument->xinclude() — Substitutes XIncludes in a DOMDocument Object
DOMDocumentFragment->appendXML() — Append raw XML data
DOMElement->__construct() — Creates a new DOMElement object
DOMElement->getAttribute() — Returns value of attribute
DOMElement->getAttributeNode() — Returns attribute node
DOMElement->getAttributeNodeNS() — Returns attribute node
DOMElement->getAttributeNS() — Returns value of attribute
DOMElement->getElementsByTagName() — Gets elements by tagname
DOMElement->getElementsByTagNameNS() — Get elements by namespaceURI and localName
DOMElement->hasAttribute() — Checks to see if attribute exists
DOMElement->hasAttributeNS() — Checks to see if attribute exists
DOMElement->removeAttribute() — Removes attribute
DOMElement->removeAttributeNode() — Removes attribute
DOMElement->removeAttributeNS() — Removes attribute
DOMElement->setAttribute() — Adds new attribute
DOMElement->setAttributeNode() — Adds new attribute node to element
DOMElement->setAttributeNodeNS() — Adds new attribute node to element
DOMElement->setAttributeNS() — Adds new attribute
DOMElement->setIdAttribute() — Declares the attribute specified by name to be of type ID
DOMElement->setIdAttributeNode() — Declares the attribute specified by node to be of type ID
DOMElement->setIdAttributeNS() — Declares the attribute specified by local name and namespace URI to be of type ID
DOMEntityReference->__construct() — Creates a new DOMEntityReference object
DOMImplementation->__construct() — Creates a new DOMImplementation object
DOMImplementation->createDocument() — Creates a DOMDocument object of the specified type with its document element
DOMImplementation->createDocumentType() — Creates an empty DOMDocumentType object
DOMImplementation->hasFeature() — Test if the DOM implementation implements a specific feature
DOMNamedNodeMap->getNamedItem() — Retrieves a node specified by name
DOMNamedNodeMap->getNamedItemNS() — Retrieves a node specified by local name and namespace URI
DOMNamedNodeMap->item() — Retrieves a node specified by index
DOMNode->appendChild() — Adds new child at the end of the children
DOMNode->cloneNode() — Clones a node
DOMNode->hasAttributes() — Checks if node has attributes
DOMNode->hasChildNodes() — Checks if node has children
DOMNode->insertBefore() — Adds a new child before a reference node
DOMNode->isDefaultNamespace() — Checks if the specified namespaceURI is the default namespace or not
DOMNode->isSameNode() — Indicates if two nodes are the same node
DOMNode->isSupported() — Checks if feature is supported for specified version
DOMNode->lookupNamespaceURI() — Gets the namespace URI of the node based on the prefix
DOMNode->lookupPrefix() — Gets the namespace prefix of the node based on the namespace URI
DOMNode->normalize() — Normalizes the node
DOMNode->removeChild() — Removes child from list of children
DOMNode->replaceChild() — Replaces a child
DOMNodelist->item() — Retrieves a node specified by index
DOMProcessingInstruction->__construct() — Creates a new DOMProcessingInstruction object
DOMText->__construct() — Creates a new DOMText object
DOMText->isWhitespaceInElementContent() — Indicates whether this text node contains whitespace
DOMText->splitText() — Breaks this node into two nodes at the specified offset
DOMXPath->__construct() — Creates a new DOMXPath object
DOMXPath->evaluate() — Evaluates the given XPath expression and returns a typed result if possible.
DOMXPath->query() — Evaluates the given XPath expression
DOMXPath->registerNamespace() — Registers the namespace with the DOMXPath object
dom_import_simplexml — Gets a DOMElement object from a SimpleXMLElement object
XXXII. DOM XML
DomAttribute->name — Returns the name of attribute
DomAttribute->set_value — Sets the value of an attribute
DomAttribute->specified — Checks if attribute is specified
DomAttribute->value — Returns value of attribute
DomDocument->add_root — Adds a root node [deprecated]
DomDocument->create_attribute — Create new attribute
DomDocument->create_cdata_section — Create new cdata node
DomDocument->create_comment — Create new comment node
DomDocument->create_element_ns — Create new element node with an associated namespace
DomDocument->create_element — Create new element node
DomDocument->create_entity_reference — Create an entity reference
DomDocument->create_processing_instruction — Creates new PI node
DomDocument->create_text_node — Create new text node
DomDocument->doctype — Returns the document type
DomDocument->document_element — Returns root element node
DomDocument->dump_file — Dumps the internal XML tree back into a file
DomDocument->dump_mem — Dumps the internal XML tree back into a string
DomDocument->get_element_by_id — Searches for an element with a certain id
DomDocument->get_elements_by_tagname — Returns array with nodes with given tagname in document or empty array, if not found
DomDocument->html_dump_mem — Dumps the internal XML tree back into a string as HTML
DomDocument->xinclude — Substitutes XIncludes in a DomDocument Object
DomDocumentType->entities() — Returns list of entities
DomDocumentType->internal_subset() — Returns internal subset
DomDocumentType->name() — Returns name of document type
DomDocumentType->notations() — Returns list of notations
DomDocumentType->public_id() — Returns public id of document type
DomDocumentType->system_id() — Returns the system id of document type
DomElement->get_attribute_node() — Returns the node of the given attribute
DomElement->get_attribute() — Returns the value of the given attribute
DomElement->get_elements_by_tagname() — Gets elements by tagname
DomElement->has_attribute() — Checks to see if an attribute exists in the current node
DomElement->remove_attribute() — Removes attribute
DomElement->set_attribute_node() — Adds new attribute
DomElement->set_attribute() — Sets the value of an attribute
DomElement->tagname() — Returns the name of the current element
DomNode->add_namespace — Adds a namespace declaration to a node
DomNode->append_child — Adds a new child at the end of the children
DomNode->append_sibling — Adds new sibling to a node
DomNode->attributes — Returns list of attributes
DomNode->child_nodes — Returns children of node
DomNode->clone_node — Clones a node
DomNode->dump_node — Dumps a single node
DomNode->first_child — Returns first child of node
DomNode->get_content — Gets content of node
DomNode->has_attributes — Checks if node has attributes
DomNode->has_child_nodes — Checks if node has children
DomNode->insert_before — Inserts new node as child
DomNode->is_blank_node — Checks if node is blank
DomNode->last_child — Returns last child of node
DomNode->next_sibling — Returns the next sibling of node
DomNode->node_name — Returns name of node
DomNode->node_type — Returns type of node
DomNode->node_value — Returns value of a node
DomNode->owner_document — Returns the document this node belongs to
DomNode->parent_node — Returns the parent of the node
DomNode->prefix — Returns name space prefix of node
DomNode->previous_sibling — Returns the previous sibling of node
DomNode->remove_child — Removes child from list of children
DomNode->replace_child — Replaces a child
DomNode->replace_node — Replaces node
DomNode->set_content — Sets content of node
DomNode->set_name — Sets name of node
DomNode->set_namespace — Sets namespace of a node
DomNode->unlink_node — Deletes node
DomProcessingInstruction->data — Returns the data of ProcessingInstruction node
DomProcessingInstruction->target — Returns the target of a ProcessingInstruction node
DomXsltStylesheet->process() — Applies the XSLT-Transformation on a DomDocument Object
DomXsltStylesheet->result_dump_file() — Dumps the result from a XSLT-Transformation into a file
DomXsltStylesheet->result_dump_mem() — Dumps the result from a XSLT-Transformation back into a string
domxml_new_doc — Creates new empty XML document
domxml_open_file — Creates a DOM object from an XML file
domxml_open_mem — Creates a DOM object of an XML document
domxml_version — Gets the XML library version
domxml_xmltree — Creates a tree of PHP objects from an XML document
domxml_xslt_stylesheet_doc — Creates a DomXsltStylesheet Object from a DomDocument Object
domxml_xslt_stylesheet_file — Creates a DomXsltStylesheet Object from an XSL document in a file
domxml_xslt_stylesheet — Creates a DomXsltStylesheet object from an XSL document in a string
domxml_xslt_version — Gets the XSLT library version
xpath_eval_expression — Evaluates the XPath Location Path in the given string
xpath_eval — Evaluates the XPath Location Path in the given string
xpath_new_context — Creates new xpath context
xpath_register_ns_auto — Register the given namespace in the passed XPath context
xpath_register_ns — Register the given namespace in the passed XPath context
xptr_eval — Evaluate the XPtr Location Path in the given string
xptr_new_context — Create new XPath Context
XXXIII. enchant
enchant_broker_describe — Enumerates the Enchant providers
enchant_broker_dict_exists — Whether a dictionary exists or not. Using non-empty tag
enchant_broker_free_dict — Free a dictionary resource
enchant_broker_free — Free the broker resource and its dictionnaries
enchant_broker_get_error — Returns the last error of the broker
enchant_broker_init — create a new broker object capable of requesting
enchant_broker_list_dicts — Returns a list of available dictionaries
enchant_broker_request_dict — create a new dictionary using a tag
enchant_broker_request_pwl_dict — creates a dictionary using a PWL file. A PWL file is personal word file one word per line.
enchant_broker_set_ordering — Declares a preference of dictionaries to use for the language
enchant_dict_add_to_personal — add a word to personal word list
enchant_dict_add_to_session — add 'word' to this spell-checking session
enchant_dict_check — Check whether a word is correctly spelled or not.
enchant_dict_describe — Describes an individual dictionary
enchant_dict_get_error — Returns the last error of the current spelling-session
enchant_dict_is_in_session — whether or not 'word' exists in this spelling-session
enchant_dict_quick_check — Check the word is correctly spelled and provide suggestions
enchant_dict_store_replacement — add a correction for a word.
enchant_dict_suggest — Will return a list of values if any of those pre-conditions are not met.
XXXIV. Errors and Logging
debug_backtrace — Generates a backtrace
debug_print_backtrace — Prints a backtrace
error_get_last — Get the last occurred error
error_log — Send an error message somewhere
error_reporting — Sets which PHP errors are reported
restore_error_handler — Restores the previous error handler function
restore_exception_handler — Restores the previously defined exception handler function
set_error_handler — Sets a user-defined error handler function
set_exception_handler — Sets a user-defined exception handler function
trigger_error — Generates a user-level error/warning/notice message
user_error — Alias of trigger_error()
XXXV. Exif
exif_imagetype — Determine the type of an image
exif_read_data — Reads the EXIF headers from JPEG or TIFF
exif_tagname — Get the header name for an index
exif_thumbnail — Retrieve the embedded thumbnail of a TIFF or JPEG image
read_exif_data — Alias of exif_read_data()
XXXVI. Expect
expect_expectl — Waits until the output from a process matches one of the patterns, a specified time period has passed, or an EOF is seen
expect_popen — Execute command via Bourne shell, and open the PTY stream to the process
XXXVII. fam
fam_cancel_monitor — Terminate monitoring
fam_close — Close FAM connection
fam_monitor_collection — Monitor a collection of files in a directory for changes
fam_monitor_directory — Monitor a directory for changes
fam_monitor_file — Monitor a regular file for changes
fam_next_event — Get next pending FAM event
fam_open — Open connection to FAM daemon
fam_pending — Check for pending FAM events
fam_resume_monitor — Resume suspended monitoring
fam_suspend_monitor — Temporarily suspend monitoring
XXXVIII. FDF
fdf_add_doc_javascript — Adds javascript code to the FDF document
fdf_add_template — Adds a template into the FDF document
fdf_close — Close an FDF document
fdf_create — Create a new FDF document
fdf_enum_values — Call a user defined function for each document value
fdf_errno — Return error code for last fdf operation
fdf_error — Return error description for FDF error code
fdf_get_ap — Get the appearance of a field
fdf_get_attachment — Extracts uploaded file embedded in the FDF
fdf_get_encoding — Get the value of the /Encoding key
fdf_get_file — Get the value of the /F key
fdf_get_flags — Gets the flags of a field
fdf_get_opt — Gets a value from the opt array of a field
fdf_get_status — Get the value of the /STATUS key
fdf_get_value — Get the value of a field
fdf_get_version — Gets version number for FDF API or file
fdf_header — Sets FDF-specific output headers
fdf_next_field_name — Get the next field name
fdf_open_string — Read a FDF document from a string
fdf_open — Open a FDF document
fdf_remove_item — Sets target frame for form
fdf_save_string — Returns the FDF document as a string
fdf_save — Save a FDF document
fdf_set_ap — Set the appearance of a field
fdf_set_encoding — Sets FDF character encoding
fdf_set_file — Set PDF document to display FDF data in
fdf_set_flags — Sets a flag of a field
fdf_set_javascript_action — Sets an javascript action of a field
fdf_set_on_import_javascript — Adds javascript code to be executed when Acrobat opens the FDF
fdf_set_opt — Sets an option of a field
fdf_set_status — Set the value of the /STATUS key
fdf_set_submit_form_action — Sets a submit form action of a field
fdf_set_target_frame — Set target frame for form display
fdf_set_value — Set the value of a field
fdf_set_version — Sets version number for a FDF file
XXXIX. Fileinfo
finfo_buffer — Return information about a string buffer
finfo_close — Close fileinfo resource
finfo_file — Return information about a file
finfo_open — Create a new fileinfo resource
finfo_set_flags — Set libmagic configuration options
XL. filePro
filepro_fieldcount — Find out how many fields are in a filePro database
filepro_fieldname — Gets the name of a field
filepro_fieldtype — Gets the type of a field
filepro_fieldwidth — Gets the width of a field
filepro_retrieve — Retrieves data from a filePro database
filepro_rowcount — Find out how many rows are in a filePro database
filepro — Read and verify the map file
XLI. Filesystem
basename — Returns filename component of path
chgrp — Changes file group
chmod — Changes file mode
chown — Changes file owner
clearstatcache — Clears file status cache
copy — Copies file
delete — See unlink() or unset()
dirname — Returns directory name component of path
disk_free_space — Returns available space in directory
disk_total_space — Returns the total size of a directory
diskfreespace — Alias of disk_free_space()
fclose — Closes an open file pointer
feof — Tests for end-of-file on a file pointer
fflush — Flushes the output to a file
fgetc — Gets character from file pointer
fgetcsv — Gets line from file pointer and parse for CSV fields
fgets — Gets line from file pointer
fgetss — Gets line from file pointer and strip HTML tags
file_exists — Checks whether a file or directory exists
file_get_contents — Reads entire file into a string
file_put_contents — Write a string to a file
file — Reads entire file into an array
fileatime — Gets last access time of file
filectime — Gets inode change time of file
filegroup — Gets file group
fileinode — Gets file inode
filemtime — Gets file modification time
fileowner — Gets file owner
fileperms — Gets file permissions
filesize — Gets file size
filetype — Gets file type
flock — Portable advisory file locking
fnmatch — Match filename against a pattern
fopen — Opens file or URL
fpassthru — Output all remaining data on a file pointer
fputcsv — Format line as CSV and write to file pointer
fputs — Alias of fwrite()
fread — Binary-safe file read
fscanf — Parses input from a file according to a format
fseek — Seeks on a file pointer
fstat — Gets information about a file using an open file pointer
ftell — Tells file pointer read/write position
ftruncate — Truncates a file to a given length
fwrite — Binary-safe file write
glob — Find pathnames matching a pattern
is_dir — Tells whether the filename is a directory
is_executable — Tells whether the filename is executable
is_file — Tells whether the filename is a regular file
is_link — Tells whether the filename is a symbolic link
is_readable — Tells whether the filename is readable
is_uploaded_file — Tells whether the file was uploaded via HTTP POST
is_writable — Tells whether the filename is writable
is_writeable — Alias of is_writable()
lchgrp — Changes group ownership of symlink
lchown — Changes user ownership of symlink
link — Create a hard link
linkinfo — Gets information about a link
lstat — Gives information about a file or symbolic link
mkdir — Makes directory
move_uploaded_file — Moves an uploaded file to a new location
parse_ini_file — Parse a configuration file
pathinfo — Returns information about a file path
pclose — Closes process file pointer
popen — Opens process file pointer
readfile — Outputs a file
readlink — Returns the target of a symbolic link
realpath — Returns canonicalized absolute pathname
rename — Renames a file or directory
rewind — Rewind the position of a file pointer
rmdir — Removes directory
set_file_buffer — Alias of stream_set_write_buffer()
stat — Gives information about a file
symlink — Creates a symbolic link
tempnam — Create file with unique file name
tmpfile — Creates a temporary file
touch — Sets access and modification time of file
umask — Changes the current umask
unlink — Deletes a file
XLII. Filter
filter_has_var — Checks if variable of specified type exists
filter_id — Returns the filter ID belonging to a named filter
filter_input_array — Gets multiple variables from outside PHP and optionally filters them
filter_input — Gets variable from outside PHP and optionally filters it
filter_list — Returns a list of all supported filters
filter_var_array — Gets multiple variables and optionally filters them
filter_var — Filters a variable with a specified filter
XLIII. Firebird/InterBase
ibase_add_user — Add a user to a security database (only for IB6 or later)
ibase_affected_rows — Return the number of rows that were affected by the previous query
ibase_backup — Initiates a backup task in the service manager and returns immediately
ibase_blob_add — Add data into a newly created blob
ibase_blob_cancel — Cancel creating blob
ibase_blob_close — Close blob
ibase_blob_create — Create a new blob for adding data
ibase_blob_echo — Output blob contents to browser
ibase_blob_get — Get len bytes data from open blob
ibase_blob_import — Create blob, copy file in it, and close it
ibase_blob_info — Return blob length and other useful info
ibase_blob_open — Open blob for retrieving data parts
ibase_close — Close a connection to an InterBase database
ibase_commit_ret — Commit a transaction without closing it
ibase_commit — Commit a transaction
ibase_connect — Open a connection to an InterBase database
ibase_db_info — Request statistics about a database
ibase_delete_user — Delete a user from a security database (only for IB6 or later)
ibase_drop_db — Drops a database
ibase_errcode — Return an error code
ibase_errmsg — Return error messages
ibase_execute — Execute a previously prepared query
ibase_fetch_assoc — Fetch a result row from a query as an associative array
ibase_fetch_object — Get an object from a InterBase database
ibase_fetch_row — Fetch a row from an InterBase database
ibase_field_info — Get information about a field
ibase_free_event_handler — Cancels a registered event handler
ibase_free_query — Free memory allocated by a prepared query
ibase_free_result — Free a result set
ibase_gen_id — Increments the named generator and returns its new value
ibase_maintain_db — Execute a maintenance command on the database server
ibase_modify_user — Modify a user to a security database (only for IB6 or later)
ibase_name_result — Assigns a name to a result set
ibase_num_fields — Get the number of fields in a result set
ibase_num_params — Return the number of parameters in a prepared query
ibase_param_info — Return information about a parameter in a prepared query
ibase_pconnect — Open a persistent connection to an InterBase database
ibase_prepare — Prepare a query for later binding of parameter placeholders and execution
ibase_query — Execute a query on an InterBase database
ibase_restore — Initiates a restore task in the service manager and returns immediately
ibase_rollback_ret — Roll back a transaction without closing it
ibase_rollback — Roll back a transaction
ibase_server_info — Request information about a database server
ibase_service_attach — Connect to the service manager
ibase_service_detach — Disconnect from the service manager
ibase_set_event_handler — Register a callback function to be called when events are posted
ibase_timefmt — Sets the format of timestamp, date and time type columns returned from queries
ibase_trans — Begin a transaction
ibase_wait_event — Wait for an event to be posted by the database
XLIV. Firebird/Interbase (PDO)
PDO_FIREBIRD DSN — Connecting to Firebird and Interbase databases
XLV. FriBiDi
fribidi_log2vis — Convert a logical string to a visual one
XLVI. FrontBase
fbsql_affected_rows — Get number of affected rows in previous FrontBase operation
fbsql_autocommit — Enable or disable autocommit
fbsql_blob_size — Get the size of a BLOB
fbsql_change_user — Change logged in user of the active connection
fbsql_clob_size — Get the size of a CLOB
fbsql_close — Close FrontBase connection
fbsql_commit — Commits a transaction to the database
fbsql_connect — Open a connection to a FrontBase Server
fbsql_create_blob — Create a BLOB
fbsql_create_clob — Create a CLOB
fbsql_create_db — Create a FrontBase database
fbsql_data_seek — Move internal result pointer
fbsql_database_password — Sets or retrieves the password for a FrontBase database
fbsql_database — Get or set the database name used with a connection
fbsql_db_query — Send a FrontBase query
fbsql_db_status — Get the status for a given database
fbsql_drop_db — Drop (delete) a FrontBase database
fbsql_errno — Returns the error number from previous operation
fbsql_error — Returns the error message from previous operation
fbsql_fetch_array — Fetch a result row as an associative array, a numeric array, or both
fbsql_fetch_assoc — Fetch a result row as an associative array
fbsql_fetch_field — Get column information from a result and return as an object
fbsql_fetch_lengths — Get the length of each output in a result
fbsql_fetch_object — Fetch a result row as an object
fbsql_fetch_row — Get a result row as an enumerated array
fbsql_field_flags — Get the flags associated with the specified field in a result
fbsql_field_len — Returns the length of the specified field
fbsql_field_name — Get the name of the specified field in a result
fbsql_field_seek — Set result pointer to a specified field offset
fbsql_field_table — Get name of the table the specified field is in
fbsql_field_type — Get the type of the specified field in a result
fbsql_free_result — Free result memory
fbsql_get_autostart_info
fbsql_hostname — Get or set the host name used with a connection
fbsql_insert_id — Get the id generated from the previous INSERT operation
fbsql_list_dbs — List databases available on a FrontBase server
fbsql_list_fields — List FrontBase result fields
fbsql_list_tables — List tables in a FrontBase database
fbsql_next_result — Move the internal result pointer to the next result
fbsql_num_fields — Get number of fields in result
fbsql_num_rows — Get number of rows in result
fbsql_password — Get or set the user password used with a connection
fbsql_pconnect — Open a persistent connection to a FrontBase Server
fbsql_query — Send a FrontBase query
fbsql_read_blob — Read a BLOB from the database
fbsql_read_clob — Read a CLOB from the database
fbsql_result — Get result data
fbsql_rollback — Rollback a transaction to the database
fbsql_rows_fetched — Get the number of rows affected by the last statement
fbsql_select_db — Select a FrontBase database
fbsql_set_characterset — Change input/output character set
fbsql_set_lob_mode — Set the LOB retrieve mode for a FrontBase result set
fbsql_set_password — Change the password for a given user
fbsql_set_transaction — Set the transaction locking and isolation
fbsql_start_db — Start a database on local or remote server
fbsql_stop_db — Stop a database on local or remote server
fbsql_table_name — Get table name of field
fbsql_tablename — Alias of of fbsql_table_name()
fbsql_username — Get or set the username for the connection
fbsql_warnings — Enable or disable FrontBase warnings
XLVII. FTP
ftp_alloc — Allocates space for a file to be uploaded
ftp_cdup — Changes to the parent directory
ftp_chdir — Changes the current directory on a FTP server
ftp_chmod — Set permissions on a file via FTP
ftp_close — Closes an FTP connection
ftp_connect — Opens an FTP connection
ftp_delete — Deletes a file on the FTP server
ftp_exec — Requests execution of a command on the FTP server
ftp_fget — Downloads a file from the FTP server and saves to an open file
ftp_fput — Uploads from an open file to the FTP server
ftp_get_option — Retrieves various runtime behaviours of the current FTP stream
ftp_get — Downloads a file from the FTP server
ftp_login — Logs in to an FTP connection
ftp_mdtm — Returns the last modified time of the given file
ftp_mkdir — Creates a directory
ftp_nb_continue — Continues retrieving/sending a file (non-blocking)
ftp_nb_fget — Retrieves a file from the FTP server and writes it to an open file (non-blocking)
ftp_nb_fput — Stores a file from an open file to the FTP server (non-blocking)
ftp_nb_get — Retrieves a file from the FTP server and writes it to a local file (non-blocking)
ftp_nb_put — Stores a file on the FTP server (non-blocking)
ftp_nlist — Returns a list of files in the given directory
ftp_pasv — Turns passive mode on or off
ftp_put — Uploads a file to the FTP server
ftp_pwd — Returns the current directory name
ftp_quit — Alias of ftp_close()
ftp_raw — Sends an arbitrary command to an FTP server
ftp_rawlist — Returns a detailed list of files in the given directory
ftp_rename — Renames a file or a directory on the FTP server
ftp_rmdir — Removes a directory
ftp_set_option — Set miscellaneous runtime FTP options
ftp_site — Sends a SITE command to the server
ftp_size — Returns the size of the given file
ftp_ssl_connect — Opens an Secure SSL-FTP connection
ftp_systype — Returns the system type identifier of the remote FTP server
XLVIII. Function handling
call_user_func_array — Call a user function given with an array of parameters
call_user_func — Call a user function given by the first parameter
create_function — Create an anonymous (lambda-style) function
func_get_arg — Return an item from the argument list
func_get_args — Returns an array comprising a function's argument list
func_num_args — Returns the number of arguments passed to the function
function_exists — Return TRUE if the given function has been defined
get_defined_functions — Returns an array of all defined functions
register_shutdown_function — Register a function for execution on shutdown
register_tick_function — Register a function for execution on each tick
unregister_tick_function — De-register a function for execution on each tick
XLIX. GeoIP
geoip_country_code_by_name — Get the two letter country code
geoip_country_code3_by_name — Get the three letter country code
geoip_country_name_by_name — Get the full country name
geoip_database_info — Get GeoIP Database information
geoip_db_avail — Determine if GeoIP Database is available
geoip_db_filename — Returns the filename of the corresponding GeoIP Database
geoip_db_get_all_info — Returns detailed informations about all GeoIP database types
geoip_id_by_name — Get the Internet connection speed
geoip_org_by_name — Get the organization name
geoip_record_by_name — Returns the detailed City information found in the GeoIP Database
geoip_region_by_name — Get the country code and region
L. gettext
bind_textdomain_codeset — Specify the character encoding in which the messages from the DOMAIN message catalog will be returned
bindtextdomain — Sets the path for a domain
dcgettext — Overrides the domain for a single lookup
dcngettext — Plural version of dcgettext
dgettext — Override the current domain
dngettext — Plural version of dgettext
gettext — Lookup a message in the current domain
ngettext — Plural version of gettext
textdomain — Sets the default domain
LI. GMP
gmp_abs — Absolute value
gmp_add — Add numbers
gmp_and — Logical AND
gmp_clrbit — Clear bit
gmp_cmp — Compare numbers
gmp_com — Calculates one's complement
gmp_div_q — Divide numbers
gmp_div_qr — Divide numbers and get quotient and remainder
gmp_div_r — Remainder of the division of numbers
gmp_div — Alias of gmp_div_q()
gmp_divexact — Exact division of numbers
gmp_fact — Factorial
gmp_gcd — Calculate GCD
gmp_gcdext — Calculate GCD and multipliers
gmp_hamdist — Hamming distance
gmp_init — Create GMP number
gmp_intval — Convert GMP number to integer
gmp_invert — Inverse by modulo
gmp_jacobi — Jacobi symbol
gmp_legendre — Legendre symbol
gmp_mod — Modulo operation
gmp_mul — Multiply numbers
gmp_neg — Negate number
gmp_nextprime — Find next prime number
gmp_or — Logical OR
gmp_perfect_square — Perfect square check
gmp_popcount — Population count
gmp_pow — Raise number into power
gmp_powm — Raise number into power with modulo
gmp_prob_prime — Check if number is "probably prime"
gmp_random — Random number
gmp_scan0 — Scan for 0
gmp_scan1 — Scan for 1
gmp_setbit — Set bit
gmp_sign — Sign of number
gmp_sqrt — Calculate square root
gmp_sqrtrem — Square root with remainder
gmp_strval — Convert GMP number to string
gmp_sub — Subtract numbers
gmp_testbit — Tests if a bit is set
gmp_xor — Logical XOR
LII. gnupg
gnupg_adddecryptkey — Add a key for decryption
gnupg_addencryptkey — Add a key for encryption
gnupg_addsignkey — Add a key for signing
gnupg_cleardecryptkeys — Removes all keys which were set for decryption before
gnupg_clearencryptkeys — Removes all keys which were set for encryption before
gnupg_clearsignkeys — Removes all keys which were set for signing before
gnupg_decrypt — Decrypts a given text
gnupg_decryptverify — Decrypts and verifies a given text
gnupg_encrypt — Encrypts a given text
gnupg_encryptsign — Encrypts and signs a given text
gnupg_export — Exports a key
gnupg_geterror — Returns the errortext, if a function fails
gnupg_getprotocol — Returns the currently active protocol for all operations
gnupg_import — Imports a key
gnupg_keyinfo — Returns an array with information about all keys that matches the given pattern
gnupg_setarmor — Toggle armored output
gnupg_seterrormode — Sets the mode for error_reporting
gnupg_setsignmode — Sets the mode for signing
gnupg_sign — Signs a given text
gnupg_verify — Verifies a signed text
LIII. gopher
gopher_parsedir — Translate a gopher formatted directory entry into an associative array.
LIV. haru
HaruException — Haru PDF Exception Class
HaruDoc — Haru PDF Document Class
HaruPage — Haru PDF Page Class
HaruFont — Haru PDF Font Class
HaruImage — Haru PDF Image Class
HaruEncoder — Haru PDF Encoder Class
HaruOutline — Haru PDF Outline Class
HaruAnnotation — Haru PDF Annotation Class
HaruDestination — Haru PDF Destination Class
HaruAnnotation::setBorderStyle — Set the border style of the annotation
HaruAnnotation::setHighlightMode — Set the highlighting mode of the annotation
HaruAnnotation::setIcon — Set the icon style of the annotation
HaruAnnotation::setOpened — Set the initial state of the annotation
HaruDestination::setFit — Set the appearance of the page to fit the window
HaruDestination::setFitB — Set the appearance of the page to fit the bounding box of the page within the window
HaruDestination::setFitBH — Set the appearance of the page to fit the width of the bounding box
HaruDestination::setFitBV — Set the appearance of the page to fit the height of the boudning box
HaruDestination::setFitH — Set the appearance of the page to fit the window width
HaruDestination::setFitR — Set the appearance of the page to fit the specified rectangle
HaruDestination::setFitV — Set the appearance of the page to fit the window height
HaruDestination::setXYZ — Set the appearance of the page
HaruDoc::addPage — Add new page to the document
HaruDoc::addPageLabel — Set the numbering style for the specified range of pages
HaruDoc::__construct — Construct new HaruDoc instance
HaruDoc::createOutline — Create a HaruOutline instance
HaruDoc::getCurrentEncoder — Get HaruEncoder currently used in the document
HaruDoc::getCurrentPage — Return current page of the document
HaruDoc::getEncoder — Get HaruEncoder instance for the specified encoding
HaruDoc::getFont — Get HaruFont instance
HaruDoc::getInfoAttr — Get current value of the specified document attribute
HaruDoc::getPageLayout — Get current page layout
HaruDoc::getPageMode — Get current page mode
HaruDoc::getStreamSize — Get the size of the temporary stream
HaruDoc::insertPage — Insert new page just before the specified page
HaruDoc::loadJPEG — Load JPEG image and return new HaruImage instance
HaruDoc::loadPNG — Load PNG image and return HaruImage instance
HaruDoc::loadRaw — Load RAW image and return HaruImage instance
HaruDoc::loadTTC — Load the font with the specified index from TTC file
HaruDoc::loadTTF — Load TTF font file
HaruDoc::loadType1 — Load Type1 font
HaruDoc::output — Write the document data to the output buffer
HaruDoc::readFromStream — Read data from the temporary stream
HaruDoc::resetError — Reset error state of the document handle
HaruDoc::resetStream — Rewind the temporary stream
HaruDoc::save — Save the document into the specified file
HaruDoc::saveToStream — Save the document into a temporary stream
HaruDoc::setCompressionMode — Set compression mode for the document
HaruDoc::setCurrentEncoder — Set the current encoder for the document
HaruDoc::setEncryptionMode — Set encryption mode for the document
HaruDoc::setInfoAttr — Set the info attribute of the document
HaruDoc::setInfoDateAttr — Set the datetime info attributes of the document
HaruDoc::setOpenAction — Define which page is shown when the document is opened
HaruDoc::setPageLayout — Set how pages should be displayed
HaruDoc::setPageMode — Set how the document should be displayed
HaruDoc::setPagesConfiguration — Set the number of pages per set of pages
HaruDoc::setPassword — Set owner and user passwords for the document
HaruDoc::setPermission — Set permissions for the document
HaruDoc::useCNSEncodings — Enable Chinese simplified encodings
HaruDoc::useCNSFonts — Enable builtin Chinese simplified fonts
HaruDoc::useCNTEncodings — Enable Chinese traditional encodings
HaruDoc::useCNTFonts — Enable builtin Chinese traditional fonts
HaruDoc::useJPEncodings — Enable Japanese encodings
HaruDoc::useJPFonts — Enable builtin Japanese fonts
HaruDoc::useKREncodings — Enable Korean encodings
HaruDoc::useKRFonts — Enable builtin Korean fonts
HaruEncoder::getByteType — Get the type of the byte in the text
HaruEncoder::getType — Get the type of the encoder
HaruEncoder::getUnicode — Convert the specified character to unicode
HaruEncoder::getWritingMode — Get the writing mode of the encoder
HaruFont::getAscent — Get the vertical ascent of the font
HaruFont::getCapHeight — Get the distance from the baseline of uppercase letters
HaruFont::getDescent — Get the vertical descent of the font
HaruFont::getEncodingName — Get the name of the encoding
HaruFont::getFontName — Get the name of the font
HaruFont::getTextWidth — Get the total width of the text, number of characters, number of words and number of spaces
HaruFont::getUnicodeWidth — Get the width of the character in the font
HaruFont::getXHeight — Get the distance from the baseline of lowercase letters
HaruFont::measureText — Calculate the number of characters which can be included within the specified width
HaruImage::getBitsPerComponent — Get the number of bits used to describe each color component of the image
HaruImage::getColorSpace — Get the name of the color space
HaruImage::getHeight — Get the height of the image
HaruImage::getSize — Get size of the image
HaruImage::getWidth — Get the width of the image
HaruImage::setColorMask — Set the color mask of the image
HaruImage::setMaskImage — Set the image mask
HaruOutline::setDestination — Set the destination for the outline
HaruOutline::setOpened — Set the initial state of the outline
HaruPage::arc — Append an arc to the current path
HaruPage::beginText — Begin a text object and set the current text position to (0,0)
HaruPage::circle — Append a circle to the current path
HaruPage::closePath — Append a straight line from the current point to the start point of the path
HaruPage::concat — Concatenate current transformation matrix of the page and the specified matrix
HaruPage::createDestination — Create new HaruDestination instance
HaruPage::createLinkAnnotation — Create new HaruAnnotation instance
HaruPage::createTextAnnotation — Create new HaruAnnotation instance
HaruPage::createURLAnnotation — Create and return new HaruAnnotation instance
HaruPage::curveTo2 — Append a Bezier curve to the current path
HaruPage::curveTo3 — Append a Bezier curve to the current path
HaruPage::curveTo — Append a Bezier curve to the current path
HaruPage::drawImage — Show image at the page
HaruPage::ellipse — Append an ellipse to the current path
HaruPage::endPath — End current path object without filling and painting operations
HaruPage::endText — End current text object
HaruPage::eofill — Fill current path using even-odd rule
HaruPage::eoFillStroke — Fill current path using even-odd rule, then paint the path
HaruPage::fill — Fill current path using nonzero winding number rule
HaruPage::fillStroke — Fill current path using nonzero winding number rule, then paint the path
HaruPage::getCharSpace — Get the current value of character spacing
HaruPage::getCMYKFill — Get the current filling color
HaruPage::getCMYKStroke — Get the current stroking color
HaruPage::getCurrentFont — Get the currently used font
HaruPage::getCurrentFontSize — Get the current font size
HaruPage::getCurrentPos — Get the current position for path painting
HaruPage::getCurrentTextPos — Get the current position for text printing
HaruPage::getDash — Get the current dash pattern
HaruPage::getFillingColorSpace — Get the current filling color space
HaruPage::getFlatness — Get the flatness of the page
HaruPage::getGMode — Get the current graphics mode
HaruPage::getGrayFill — Get the current filling color
HaruPage::getGrayStroke — Get the current stroking color
HaruPage::getHeight — Get the height of the page
HaruPage::getHorizontalScaling — Get the current value of horizontal scaling
HaruPage::getLineCap — Get the current line cap style
HaruPage::getLineJoin — Get the current line join style
HaruPage::getLineWidth — Get the current line width
HaruPage::getMiterLimit — Get the value of miter limit
HaruPage::getRGBFill — Get the current filling color
HaruPage::getRGBStroke — Get the current stroking color
HaruPage::getStrokingColorSpace — Get the current stroking color space
HaruPage::getTextLeading — Get the current value of line spacing
HaruPage::getTextMatrix — Get the current text transformation matrix of the page
HaruPage::getTextRenderingMode — Get the current text rendering mode
HaruPage::getTextRise — Get the current value of text rising
HaruPage::getTextWidth — Get the width of the text using current fontsize, character spacing and word spacing
HaruPage::getTransMatrix — Get the current transformation matrix of the page
HaruPage::getWidth — Get the width of the page
HaruPage::getWordSpace — Get the current value of word spacing
HaruPage::lineTo — Draw a line from the current point to the specified point
HaruPage::measureText — Calculate the number of characters which can be included within the specified width
HaruPage::moveTextPos — Move text position to the specified offset
HaruPage::moveTo — Set starting point for new drawing path
HaruPage::moveToNextLine — Move text position to the start of the next line
HaruPage::rectangle — Append a rectangle to the current path
HaruPage::setCharSpace — Set character spacing for the page
HaruPage::setCMYKFill — Set filling color for the page
HaruPage::setCMYKStroke — Set stroking color for the page
HaruPage::setDash — Set the dash pattern for the page
HaruPage::setFlatness — Set flatness for the page
HaruPage::setFontAndSize — Set font and fontsize for the page
HaruPage::setGrayFill — Set filling color for the page
HaruPage::setGrayStroke — Sets stroking color for the page
HaruPage::setHeight — Set height of the page
HaruPage::setHorizontalScaling — Set horizontal scaling for the page
HaruPage::setLineCap — Set the shape to be used at the ends of lines
HaruPage::setLineJoin — Set line join style for the page
HaruPage::setLineWidth — Set line width for the page
HaruPage::setMiterLimit — Set the current value of the miter limit of the page
HaruPage::setRGBFill — Set filling color for the page
HaruPage::setRGBStroke — Set stroking color for the page
HaruPage::setRotate — Set rotation angle of the page
HaruPage::setSize — Set size and direction of the page
HaruPage::setSlideShow — Set transition style for the page
HaruPage::setTextLeading — Set text leading (line spacing) for the page
HaruPage::setTextMatrix — Set the current text transformation matrix of the page
HaruPage::setTextRenderingMode — Set text rendering mode for the page
HaruPage::setTextRise — Set the current value of text rising
HaruPage::setWidth — Set width of the page
HaruPage::setWordSpace — Set word spacing for the page
HaruPage::showText — Print text at the current position of the page
HaruPage::showTextNextLine — Move the current position to the start of the next line and print the text
HaruPage::stroke — Paint current path
HaruPage::textOut — Print the text on the specified position
HaruPage::textRect — Print the text inside the specified region
LV. hash
hash_algos — Return a list of registered hashing algorithms
hash_file — Generate a hash value using the contents of a given file
hash_final — Finalize an incremental hash and return resulting digest
hash_hmac_file — Generate a keyed hash value using the HMAC method and the contents of a given file
hash_hmac — Generate a keyed hash value using the HMAC method
hash_init — Initialize an incremental hashing context
hash_update_file — Pump data into an active hashing context from a file
hash_update_stream — Pump data into an active hashing context from an open stream
hash_update — Pump data into an active hashing context
hash — Generate a hash value (message digest)
LVI. http
Installation — Installing the HTTP extension
Configuration — http module configuration directives
Resources — Resources created by the HTTP extension
Constants — predefined http module constants
Request Options — options usable with the HttpRequest class and request functions
HttpMessage — HTTP Message Class
HttpMessage::__construct — HttpMessage constructor
HttpMessage::factory — Create HttpMessage from string
HttpMessage::fromEnv — Create HttpMessage from environment
HttpMessage::fromString — Create HttpMessage from string
HttpMessage::toString — Get string representation
HttpMessage::toMessageTypeObject — Create HTTP object regarding message type
HttpMessage::guessContentType — Guess content type
HttpMessage::detach — Detach HttpMessage
HttpMessage::prepend — Prepend message(s)
HttpMessage::reverse — Reverse message chain
HttpMessage::send — Send message
HttpMessage::getParentMessage — Get parent message
HttpMessage::getType — Get message type
HttpMessage::setType — Set message type
HttpMessage::getHttpVersion — Get HTTP version
HttpMessage::setHttpVersion — Set HTTP version
HttpMessage::getHeaders — Get message headers
HttpMessage::getHeader — Get header
HttpMessage::addHeaders — Add headers
HttpMessage::setHeaders — Set headers
HttpMessage::getBody — Get message body
HttpMessage::setBody — Set message body
HttpMessage::getRequestMethod — Get request method
HttpMessage::setRequestMethod — Set request method
HttpMessage::getRequestUrl — Get request URL
HttpMessage::setRequestUrl — Set request URL
HttpMessage::getResponseCode — Get response code
HttpMessage::setResponseCode — Set response code
HttpMessage::getResponseStatus — Get response status
HttpMessage::setResponseStatus — Set response status
HttpQueryString — HTTP Query String Class
HttpQueryString::__construct — HttpQueryString constructor
HttpQueryString::singleton — HttpQueryString singleton
HttpQueryString::get — Get (part of) query string
HttpQueryString::mod — Modifiy query string copy
HttpQueryString::set — Set query string params
HttpQueryString::toArray — Get query string as array
HttpQueryString::toString — Get query string
HttpQueryString::xlate — Change query strings charset
HttpDeflateStream — HTTP Deflate Stream Class
HttpDeflateStream::factory — HttpDeflateStream class factory
HttpDeflateStream::__construct — HttpDeflateStream class constructor
HttpDeflateStream::update — Update deflate stream
HttpDeflateStream::flush — Flush deflate stream
HttpDeflateStream::finish — Finalize deflate stream
HttpInflateStream — HTTP Inflate Stream
HttpInflateStream::factory — HttpInflateStream class factory
HttpInflateStream::__construct — HttpInflateStream class constructor
HttpInflateStream::update — Update inflate stream
HttpInflateStream::flush — Flush inflate stream
HttpInflateStream::finish — Finalize inflate stream
HttpRequest — HTTP Request Class
HttpRequest::addCookies — Add cookies
HttpRequest::addHeaders — Add headers
HttpRequest::addPostFields — Add post fields
HttpRequest::addPostFile — Add post file
HttpRequest::addPutData — Add put data
HttpRequest::addQueryData — Add query data
HttpRequest::addRawPostData — Add raw post data
HttpRequest::addSslOptions — Add ssl options
HttpRequest::clearHistory — Clear history
HttpRequest::__construct — HttpRequest constructor
HttpRequest::enableCookies — Enable cookies
HttpRequest::getContentType — Get content type
HttpRequest::getCookies — Get cookies
HttpRequest::getHeaders — Get headers
HttpRequest::getHistory — Get history
HttpRequest::getMethod — Get method
HttpRequest::getOptions — Get options
HttpRequest::getPostFields — Get post fields
HttpRequest::getPostFiles — Get post files
HttpRequest::getPutData — Get put data
HttpRequest::getPutFile — Get put file
HttpRequest::getQueryData — Get query data
HttpRequest::getRawPostData — Get raw post data
HttpRequest::getRawRequestMessage — Get raw request message
HttpRequest::getRawResponseMessage — Get raw response message
HttpRequest::getRequestMessage — Get request message
HttpRequest::getResponseBody — Get response body
HttpRequest::getResponseCode — Get response code
HttpRequest::getResponseCookies — Get response cookie(s)
HttpRequest::getResponseData — Get response data
HttpRequest::getResponseHeader — Get response header(s)
HttpRequest::getResponseInfo — Get response info
HttpRequest::getResponseMessage — Get response message
HttpRequest::getResponseStatus — Get response status
HttpRequest::getSslOptions — Get ssl options
HttpRequest::getUrl — Get url
HttpRequest::resetCookies — Reset cookies
HttpRequest::send — Send request
HttpRequest::setContentType — Set content type
HttpRequest::setCookies — Set cookies
HttpRequest::setHeaders — Set headers
HttpRequest::setMethod — Set method
HttpRequest::setOptions — Set options
HttpRequest::setPostFields — Set post fields
HttpRequest::setPostFiles — Set post files
HttpRequest::setPutData — Set put data
HttpRequest::setPutFile — Set put file
HttpRequest::setQueryData — Set query data
HttpRequest::setRawPostData — Set raw post data
HttpRequest::setSslOptions — Set ssl options
HttpRequest::setUrl — Set URL
HttpRequestPool — HTTP Request Pool Class
HttpRequestPool::attach — Attach HttpRequest
HttpRequestPool::__construct — HttpRequestPool constructor
HttpRequestPool::__destruct — HttpRequestPool destructor
HttpRequestPool::detach — Detach HttpRequest
HttpRequestPool::getAttachedRequests — Get attached requests
HttpRequestPool::getFinishedRequests — Get finished requests
HttpRequestPool::reset — Reset request pool
HttpRequestPool::send — Send all requests
HttpRequestPool::socketPerform — Perform socket actions
HttpRequestPool::socketSelect — Perform socket select
HttpResponse — HTTP Response Class
HttpResponse::capture — Capture script output
HttpResponse::getBufferSize — Get buffer size
HttpResponse::getCacheControl — Get cache control
HttpResponse::getCache — Get cache
HttpResponse::getContentDisposition — Get content disposition
HttpResponse::getContentType — Get content type
HttpResponse::getData — Get data
HttpResponse::getETag — Get ETag
HttpResponse::getFile — Get file
HttpResponse::getGzip — Get gzip
HttpResponse::getHeader — Get header
HttpResponse::getLastModified — Get last modified
HttpResponse::getStream — Get Stream
HttpResponse::getThrottleDelay — Get throttle delay
HttpResponse::getRequestBody — Get request body
HttpResponse::getRequestBodyStream — Get request body stream
HttpResponse::getRequestHeaders — Get request headers
HttpResponse::guessContentType — Guess content type
HttpResponse::redirect — Redirect
HttpResponse::send — Send response
HttpResponse::setBufferSize — Set buffer size
HttpResponse::setCacheControl — Set cache control
HttpResponse::setCache — Set cache
HttpResponse::setContentDisposition — Set content disposition
HttpResponse::setContentType — Set content type
HttpResponse::setData — Set data
HttpResponse::setETag — Set ETag
HttpResponse::setFile — Set file
HttpResponse::setGzip — Set gzip
HttpResponse::setHeader — Set header
HttpResponse::setLastModified — Set last modified
HttpResponse::setStream — Set stream
HttpResponse::setThrottleDelay — Set throttle delay
HttpResponse::status — Send HTTP response status
http_cache_etag — Caching by ETag
http_cache_last_modified — Caching by last modification
http_chunked_decode — Decode chunked-encoded data
http_deflate — Deflate data
http_inflate — Inflate data
http_get_request_body_stream — Get request body as stream
http_get_request_body — Get request body as string
http_get_request_headers — Get request headers as array
http_date — Compose HTTP RFC compliant date
http_support — Check built-in HTTP support
http_match_etag — Match ETag
http_match_modified — Match last modification
http_match_request_header — Match any header
http_build_cookie — Build cookie string
http_negotiate_charset — Negotiate clients preferred character set
http_negotiate_content_type — Negotiate clients preferred content type
http_negotiate_language — Negotiate clients preferred language
ob_deflatehandler — Deflate output handler
ob_etaghandler — ETag output handler
ob_inflatehandler — Inflate output handler
http_parse_cookie — Parse HTTP cookie
http_parse_headers — Parse HTTP headers
http_parse_message — Parse HTTP messages
http_parse_params — Parse parameter list
http_persistent_handles_count — Stat persistent handles
http_persistent_handles_ident — Get/set ident of persistent handles
http_persistent_handles_clean — Clean up persistent handles
http_get — Perform GET request
http_head — Perform HEAD request
http_post_data — Perform POST request with pre-encoded data
http_post_fields — Perform POST request with data to be encoded
http_put_data — Perform PUT request with data
http_put_file — Perform PUT request with file
http_put_stream — Perform PUT request with stream
http_request_method_exists — Check whether request method exists
http_request_method_name — Get request method name
http_request_method_register — Register request method
http_request_method_unregister — Unregister request method
http_request — Perform custom request
http_request_body_encode — Encode request body
http_redirect — Issue HTTP redirect
http_send_content_disposition — Send Content-Disposition
http_send_content_type — Send Content-Type
http_send_data — Send arbitrary data
http_send_file — Send file
http_send_last_modified — Send Last-Modified
http_send_status — Send HTTP response status
http_send_stream — Send stream
http_throttle — HTTP throttling
http_build_str — Build query string
http_build_url — Build an URL
LVII. Hyperwave
hw_Array2Objrec — Convert attributes from object array to object record
hw_changeobject — Changes attributes of an object (obsolete)
hw_Children — Object ids of children
hw_ChildrenObj — Object records of children
hw_Close — Closes the Hyperwave connection
hw_Connect — Opens a connection
hw_connection_info — Prints information about the connection to Hyperwave server
hw_cp — Copies objects
hw_Deleteobject — Deletes object
hw_DocByAnchor — Object id object belonging to anchor
hw_DocByAnchorObj — Object record object belonging to anchor
hw_Document_Attributes — Object record of hw_document
hw_Document_BodyTag — Body tag of hw_document
hw_Document_Content — Returns content of hw_document
hw_Document_SetContent — Sets/replaces content of hw_document
hw_Document_Size — Size of hw_document
hw_dummy — Hyperwave dummy function
hw_EditText — Retrieve text document
hw_Error — Error number
hw_ErrorMsg — Returns error message
hw_Free_Document — Frees hw_document
hw_GetAnchors — Object ids of anchors of document
hw_GetAnchorsObj — Object records of anchors of document
hw_GetAndLock — Return object record and lock object
hw_GetChildColl — Object ids of child collections
hw_GetChildCollObj — Object records of child collections
hw_GetChildDocColl — Object ids of child documents of collection
hw_GetChildDocCollObj — Object records of child documents of collection
hw_GetObject — Object record
hw_GetObjectByQuery — Search object
hw_GetObjectByQueryColl — Search object in collection
hw_GetObjectByQueryCollObj — Search object in collection
hw_GetObjectByQueryObj — Search object
hw_GetParents — Object ids of parents
hw_GetParentsObj — Object records of parents
hw_getrellink — Get link from source to dest relative to rootid
hw_GetRemote — Gets a remote document
hw_getremotechildren — Gets children of remote document
hw_GetSrcByDestObj — Returns anchors pointing at object
hw_GetText — Retrieve text document
hw_getusername — Name of currently logged in user
hw_Identify — Identifies as user
hw_InCollections — Check if object ids in collections
hw_Info — Info about connection
hw_InsColl — Insert collection
hw_InsDoc — Insert document
hw_insertanchors — Inserts only anchors into text
hw_InsertDocument — Upload any document
hw_InsertObject — Inserts an object record
hw_mapid — Maps global id on virtual local id
hw_Modifyobject — Modifies object record
hw_mv — Moves objects
hw_New_Document — Create new document
hw_objrec2array — Convert attributes from object record to object array
hw_Output_Document — Prints hw_document
hw_pConnect — Make a persistent database connection
hw_PipeDocument — Retrieve any document
hw_Root — Root object id
hw_setlinkroot — Set the id to which links are calculated
hw_stat — Returns status string
hw_Unlock — Unlock object
hw_Who — List of currently logged in users
LVIII. Hyperwave API
hw_api_attribute->key — Returns key of the attribute
hw_api_attribute->langdepvalue — Returns value for a given language
hw_api_attribute->value — Returns value of the attribute
hw_api_attribute->values — Returns all values of the attribute
hw_api_attribute — Creates instance of class hw_api_attribute
hw_api->checkin — Checks in an object
hw_api->checkout — Checks out an object
hw_api->children — Returns children of an object
hw_api_content->mimetype — Returns mimetype
hw_api_content->read — Read content
hw_api->content — Returns content of an object
hw_api->copy — Copies physically
hw_api->dbstat — Returns statistics about database server
hw_api->dcstat — Returns statistics about document cache server
hw_api->dstanchors — Returns a list of all destination anchors
hw_api->dstofsrcanchor — Returns destination of a source anchor
hw_api_error->count — Returns number of reasons
hw_api_error->reason — Returns reason of error
hw_api->find — Search for objects
hw_api->ftstat — Returns statistics about fulltext server
hwapi_hgcsp — Returns object of class hw_api
hw_api->hwstat — Returns statistics about Hyperwave server
hw_api->identify — Log into Hyperwave Server
hw_api->info — Returns information about server configuration
hw_api->insert — Inserts a new object
hw_api->insertanchor — Inserts a new object of type anchor
hw_api->insertcollection — Inserts a new object of type collection
hw_api->insertdocument — Inserts a new object of type document
hw_api->link — Creates a link to an object
hw_api->lock — Locks an object
hw_api->move — Moves object between collections
hw_api_content — Create new instance of class hw_api_content
hw_api_object->assign — Clones object
hw_api_object->attreditable — Checks whether an attribute is editable
hw_api_object->count — Returns number of attributes
hw_api_object->insert — Inserts new attribute
hw_api_object — Creates a new instance of class hw_api_object
hw_api_object->remove — Removes attribute
hw_api_object->title — Returns the title attribute
hw_api_object->value — Returns value of attribute
hw_api->object — Retrieve attribute information
hw_api->objectbyanchor — Returns the object an anchor belongs to
hw_api->parents — Returns parents of an object
hw_api_reason->description — Returns description of reason
hw_api_reason->type — Returns type of reason
hw_api->remove — Delete an object
hw_api->replace — Replaces an object
hw_api->setcommittedversion — Commits version other than last version
hw_api->srcanchors — Returns a list of all source anchors
hw_api->srcsofdst — Returns source of a destination object
hw_api->unlock — Unlocks a locked object
hw_api->user — Returns the own user object
hw_api->userlist — Returns a list of all logged in users
LIX. i18n
locale_get_default — Get the default Locale
locale_set_default — Set the default Locale
LX. IBM (PDO)
PDO_IBM DSN — Connecting to IBM databases
LXI. ibm_db2
db2_autocommit — Returns or sets the AUTOCOMMIT state for a database connection
db2_bind_param — Binds a PHP variable to an SQL statement parameter
db2_client_info — Returns an object with properties that describe the DB2 database client
db2_close — Closes a database connection
db2_column_privileges — Returns a result set listing the columns and associated privileges for a table
db2_columns — Returns a result set listing the columns and associated metadata for a table
db2_commit — Commits a transaction
db2_conn_error — Returns a string containing the SQLSTATE returned by the last connection attempt
db2_conn_errormsg — Returns the last connection error message and SQLCODE value
db2_connect — Returns a connection to a database
db2_cursor_type — Returns the cursor type used by a statement resource
db2_escape_string — Used to escape certain characters.
db2_exec — Executes an SQL statement directly
db2_execute — Executes a prepared SQL statement
db2_fetch_array — Returns an array, indexed by column position, representing a row in a result set
db2_fetch_assoc — Returns an array, indexed by column name, representing a row in a result set
db2_fetch_both — Returns an array, indexed by both column name and position, representing a row in a result set
db2_fetch_object — Returns an object with properties representing columns in the fetched row
db2_fetch_row — Sets the result set pointer to the next row or requested row
db2_field_display_size — Returns the maximum number of bytes required to display a column
db2_field_name — Returns the name of the column in the result set
db2_field_num — Returns the position of the named column in a result set
db2_field_precision — Returns the precision of the indicated column in a result set
db2_field_scale — Returns the scale of the indicated column in a result set
db2_field_type — Returns the data type of the indicated column in a result set
db2_field_width — Returns the width of the current value of the indicated column in a result set
db2_foreign_keys — Returns a result set listing the foreign keys for a table
db2_free_result — Frees resources associated with a result set
db2_free_stmt — Frees resources associated with the indicated statement resource
db2_get_option — Retrieves an option value for a statement resource or a connection resource
db2_lob_read — Gets a user defined size of LOB files with each invocation
db2_next_result — Requests the next result set from a stored procedure
db2_num_fields — Returns the number of fields contained in a result set
db2_num_rows — Returns the number of rows affected by an SQL statement
db2_pconnect — Returns a persistent connection to a database
db2_prepare — Prepares an SQL statement to be executed
db2_primary_keys — Returns a result set listing primary keys for a table
db2_procedure_columns — Returns a result set listing stored procedure parameters
db2_procedures — Returns a result set listing the stored procedures registered in a database
db2_result — Returns a single column from a row in the result set
db2_rollback — Rolls back a transaction
db2_server_info — Returns an object with properties that describe the DB2 database server
db2_set_option — Set options for connection or statement resources
db2_special_columns — Returns a result set listing the unique row identifier columns for a table
db2_statistics — Returns a result set listing the index and statistics for a table
db2_stmt_error — Returns a string containing the SQLSTATE returned by an SQL statement
db2_stmt_errormsg — Returns a string containing the last SQL statement error message
db2_table_privileges — Returns a result set listing the tables and associated privileges in a database
db2_tables — Returns a result set listing the tables and associated metadata in a database
LXII. iconv
iconv_get_encoding — Retrieve internal configuration variables of iconv extension
iconv_mime_decode_headers — Decodes multiple MIME header fields at once
iconv_mime_decode — Decodes a MIME header field
iconv_mime_encode — Composes a MIME header field
iconv_set_encoding — Set current setting for character encoding conversion
iconv_strlen — Returns the character count of string
iconv_strpos — Finds position of first occurrence of a needle within a haystack
iconv_strrpos — Finds the last occurrence of a needle within a haystack
iconv_substr — Cut out part of a string
iconv — Convert string to requested character encoding
ob_iconv_handler — Convert character encoding as output buffer handler
LXIII. id3
id3_get_frame_long_name — Get the long name of an ID3v2 frame
id3_get_frame_short_name — Get the short name of an ID3v2 frame
id3_get_genre_id — Get the id for a genre
id3_get_genre_list — Get all possible genre values
id3_get_genre_name — Get the name for a genre id
id3_get_tag — Get all information stored in an ID3 tag
id3_get_version — Get version of an ID3 tag
id3_remove_tag — Remove an existing ID3 tag
id3_set_tag — Update information stored in an ID3 tag
LXIV. IIS Functions
iis_add_server — Creates a new virtual web server
iis_get_dir_security — Gets Directory Security
iis_get_script_map — Gets script mapping on a virtual directory for a specific extension
iis_get_server_by_comment — Return the instance number associated with the Comment
iis_get_server_by_path — Return the instance number associated with the Path
iis_get_server_rights — Gets server rights
iis_get_service_state — Returns the state for the service defined by ServiceId
iis_remove_server — Removes the virtual web server indicated by ServerInstance
iis_set_app_settings — Creates application scope for a virtual directory
iis_set_dir_security — Sets Directory Security
iis_set_script_map — Sets script mapping on a virtual directory
iis_set_server_rights — Sets server rights
iis_start_server — Starts the virtual web server
iis_start_service — Starts the service defined by ServiceId
iis_stop_server — Stops the virtual web server
iis_stop_service — Stops the service defined by ServiceId
LXV. Image
gd_info — Retrieve information about the currently installed GD library
getimagesize — Get the size of an image
image_type_to_extension — Get file extension for image type
image_type_to_mime_type — Get Mime-Type for image-type returned by getimagesize, exif_read_data, exif_thumbnail, exif_imagetype
image2wbmp — Output image to browser or file
imagealphablending — Set the blending mode for an image
imageantialias — Should antialias functions be used or not
imagearc — Draws an arc
imagechar — Draw a character horizontally
imagecharup — Draw a character vertically
imagecolorallocate — Allocate a color for an image
imagecolorallocatealpha — Allocate a color for an image
imagecolorat — Get the index of the color of a pixel
imagecolorclosest — Get the index of the closest color to the specified color
imagecolorclosestalpha — Get the index of the closest color to the specified color + alpha
imagecolorclosesthwb — Get the index of the color which has the hue, white and blackness nearest to the given color
imagecolordeallocate — De-allocate a color for an image
imagecolorexact — Get the index of the specified color
imagecolorexactalpha — Get the index of the specified color + alpha
imagecolormatch — Makes the colors of the palette version of an image more closely match the true color version
imagecolorresolve — Get the index of the specified color or its closest possible alternative
imagecolorresolvealpha — Get the index of the specified color + alpha or its closest possible alternative
imagecolorset — Set the color for the specified palette index
imagecolorsforindex — Get the colors for an index
imagecolorstotal — Find out the number of colors in an image's palette
imagecolortransparent — Define a color as transparent
imageconvolution — Apply a 3x3 convolution matrix, using coefficient and offset
imagecopy — Copy part of an image
imagecopymerge — Copy and merge part of an image
imagecopymergegray — Copy and merge part of an image with gray scale
imagecopyresampled — Copy and resize part of an image with resampling
imagecopyresized — Copy and resize part of an image
imagecreate — Create a new palette based image
imagecreatefromgd2 — Create a new image from GD2 file or URL
imagecreatefromgd2part — Create a new image from a given part of GD2 file or URL
imagecreatefromgd — Create a new image from GD file or URL
imagecreatefromgif — Create a new image from file or URL
imagecreatefromjpeg — Create a new image from file or URL
imagecreatefrompng — Create a new image from file or URL
imagecreatefromstring — Create a new image from the image stream in the string
imagecreatefromwbmp — Create a new image from file or URL
imagecreatefromxbm — Create a new image from file or URL
imagecreatefromxpm — Create a new image from file or URL
imagecreatetruecolor — Create a new true color image
imagedashedline — Draw a dashed line
imagedestroy — Destroy an image
imageellipse — Draw an ellipse
imagefill — Flood fill
imagefilledarc — Draw a partial ellipse and fill it
imagefilledellipse — Draw a filled ellipse
imagefilledpolygon — Draw a filled polygon
imagefilledrectangle — Draw a filled rectangle
imagefilltoborder — Flood fill to specific color
imagefilter — Applies a filter to an image
imagefontheight — Get font height
imagefontwidth — Get font width
imageftbbox — Give the bounding box of a text using fonts via freetype2
imagefttext — Write text to the image using fonts using FreeType 2
imagegammacorrect — Apply a gamma correction to a GD image
imagegd2 — Output GD2 image to browser or file
imagegd — Output GD image to browser or file
imagegif — Output image to browser or file
imagegrabscreen — Captures the whole screen
imagegrabwindow — Captures a window
imageinterlace — Enable or disable interlace
imageistruecolor — Finds whether an image is a truecolor image
imagejpeg — Output image to browser or file
imagelayereffect — Set the alpha blending flag to use the bundled libgd layering effects
imageline — Draw a line
imageloadfont — Load a new font
imagepalettecopy — Copy the palette from one image to another
imagepng — Output a PNG image to either the browser or a file
imagepolygon — Draws a polygon
imagepsbbox — Give the bounding box of a text rectangle using PostScript Type1 fonts
imagepsencodefont — Change the character encoding vector of a font
imagepsextendfont — Extend or condense a font
imagepsfreefont — Free memory used by a PostScript Type 1 font
imagepsloadfont — Load a PostScript Type 1 font from file
imagepsslantfont — Slant a font
imagepstext — Draws a text over an image using PostScript Type1 fonts
imagerectangle — Draw a rectangle
imagerotate — Rotate an image with a given angle
imagesavealpha — Set the flag to save full alpha channel information (as opposed to single-color transparency) when saving PNG images
imagesetbrush — Set the brush image for line drawing
imagesetpixel — Set a single pixel
imagesetstyle — Set the style for line drawing
imagesetthickness — Set the thickness for line drawing
imagesettile — Set the tile image for filling
imagestring — Draw a string horizontally
imagestringup — Draw a string vertically
imagesx — Get image width
imagesy — Get image height
imagetruecolortopalette — Convert a true color image to a palette image
imagettfbbox — Give the bounding box of a text using TrueType fonts
imagettftext — Write text to the image using TrueType fonts
imagetypes — Return the image types supported by this PHP build
imagewbmp — Output image to browser or file
imagexbm — Output XBM image to browser or file
iptcembed — Embed binary IPTC data into a JPEG image
iptcparse — Parse a binary IPTC block into single tags.
jpeg2wbmp — Convert JPEG image file to WBMP image file
png2wbmp — Convert PNG image file to WBMP image file
LXVI. Imagick Image Library
Constants — Imagick class constants
Installation — Installing the Imagick extension
Imagick — Imagick Class
Imagick::adaptiveBlurImage — Adds adaptive blur filter to image
Imagick::adaptiveResizeImage — Adaptively resize image with data dependent triangulation
Imagick::adaptiveSharpenImage — Adaptively sharpen the image
Imagick::adaptiveThresholdImage — Selects a threshold for each pixel based on a range of intensity
Imagick::addImage — Adds new image to Imagick object image list
Imagick::addNoiseImage — Adds random noise to the image
Imagick::affineTransformImage — Transforms an image
Imagick::annotateImage — Annotates an image with text
Imagick::appendImages — Append a set of images
Imagick::averageImages — Average a set of images
Imagick::blackThresholdImage — Forces all pixels below the threshold into black
Imagick::blurImage — Adds blur filter to image
Imagick::borderImage — Surrounds the image with a border
Imagick::charcoalImage — Simulates a charcoal drawing
Imagick::chopImage — Removes a region of an image and trims
Imagick::clear — Clears all resources associated to Imagick object
Imagick::clipImage — Clips along the first path from the 8BIM profile
Imagick::clipPathImage — Clips along the named paths from the 8BIM profile
Imagick::clone — Makes an exact copy of the Imagick object
Imagick::coalesceImages — Composites a set of images
Imagick::colorFloodfillImage — Changes the color value of any pixel that matches target
Imagick::colorizeImage — Blends the fill color with the image
Imagick::clutImage — Replaces colors in the image from a color lookup table
Imagick::combineImages — Combines one or more images into a single image
Imagick::commentImage — Adds a comment to your image
Imagick::compareImageChannels — Returns the difference in one or more images
Imagick::compareImageLayers — Returns the maximum bounding region between images
Imagick::compositeImage — Composite one image onto another
Imagick::__construct — The Imagick constructor
Imagick::contrastImage — Change the contrast of the image
Imagick::contrastStretchImage — Enhances the contrast of a color image
Imagick::convolveImage — Applies a custom convolution kernel to the image
Imagick::cropImage — Extracts a region of the image
Imagick::current — Sets image pointer at the correct sequence
Imagick::cycleColormapImage — Displaces an image's colormap
Imagick::deconstructImages — Returns certain pixel differences between images
Imagick::despeckleImage — Reduces the speckle noise in an image
Imagick::destroy — Destroys the Imagick object
Imagick::drawImage — Renders the ImagickDrawing object on the current image
Imagick::edgeImage — Enhance edges within the image
Imagick::embossImage — Returns a grayscale image with a three-dimensional effect
Imagick::enhanceImage — Improves the quality of a noisy image
Imagick::equalizeImage — Equalizes the image histogram
Imagick::evaluateImage — Applies an expression to an image
Imagick::flattenImages — Merges a sequence of images
Imagick::flipImage — Creates a vertical mirror image
Imagick::flopImage — Creates a horizontal mirror image
Imagick::frameImage — Adds a simulated three-dimensional border
Imagick::fxImage — Evaluate expression for each pixel in the image
Imagick::gammaImage — Gamma-corrects an image
Imagick::gaussianBlurImage — Blurs an image
Imagick::getCompressionQuality — Gets the object compression quality
Imagick::getCompression — Gets the object compression type
Imagick::getCopyright — Returns the ImageMagick API copyright as a string constant
Imagick::getFilename — The filename associated with an image sequence
Imagick::getFormat — Returns the format of the Imagick object
Imagick::getHomeURL — Returns the ImageMagick home URL
Imagick::getImageBackgroundColor — Returns the image background color
Imagick::getImageBlob — Returns the image sequence as a blob
Imagick::getImageBluePrimary — Returns the chromaticy blue primary point
Imagick::getImageBorderColor — Returns the image border color
Imagick::getImageChannelDepth — Gets the depth for a particular image channel
Imagick::getImageChannelDistortion — Compares image channels of an image to a reconstructed image
Imagick::getImageChannelExtrema — Gets the extrema for one or more image channels
Imagick::getImageChannelMean — Gets the mean and standard deviation
Imagick::getImageChannelStatistics — Returns statistics for each channel in the image
Imagick::getImageColormapColor — Returns the color of the specified colormap index
Imagick::getImageColorspace — Gets the image colorspace
Imagick::getImageColors — Gets the number of unique colors in the image
Imagick::getImageCompose — Returns the composite operator associated with the image
Imagick::getImageDelay — Gets the image delay
Imagick::getImageDepth — Gets the image depth
Imagick::getImageDispose — Gets the image disposal method
Imagick::getImageDistortion — Compares an image to a reconstructed image
Imagick::getImageExtrema — Gets the extrema for the image
Imagick::getImageFilename — Returns the filename of a particular image in a sequence
Imagick::getImageSize — Returns the image length in bytes
Imagick::getImageLength — Returns the image length in bytes
Imagick::getImageFormat — Returns the format of a particular image in a sequence
Imagick::getImageGamma — Gets the image gamma
Imagick::getImageGeometry — Gets the width and height as an associative array
Imagick::getImageGreenPrimary — Returns the chromaticy green primary point
Imagick::getImageHeight — Returns the image height
Imagick::getImageHistogram — Gets the image histogram
Imagick::getImageIndex — Gets the index of the current active image
Imagick::getIteratorIndex — Gets the index of the current active image
Imagick::getImageInterlaceScheme — Gets the image interlace scheme
Imagick::getImageInterpolateMethod — Returns the interpolation method
Imagick::getImageIterations — Gets the image iterations
Imagick::getImageMatteColor — Returns the image matte color
Imagick::getImageMatte — Return if the image has a matte channel
Imagick::getImagePage — Returns the page geometry
Imagick::getImagePixelColor — Returns the color of the specified pixel
Imagick::getImageProfile — Returns the named image profile
Imagick::getImageProfiles — Returns the image profiles
Imagick::getImageProperty — Returns the named image property
Imagick::getImageProperties — Returns the image properties
Imagick::getImageRedPrimary — Returns the chromaticy red primary point
Imagick::getImageRegion — Extracts a region of the image
Imagick::getImageRenderingIntent — Gets the image rendering intent
Imagick::getImageResolution — Gets the image X and Y resolution
Imagick::getImageScene — Gets the image scene
Imagick::getImageSignature — Generates an SHA-256 message digest
Imagick::getImageTicksPerSecond — Gets the image ticks-per-second
Imagick::getImageTotalInkDensity — Gets the image total ink density
Imagick::getImageType — Gets the potential image type
Imagick::getImageUnits — Gets the image units of resolution
Imagick::getImageVirtualPixelMethod — Returns the virtual pixel method
Imagick::getImageWhitePoint — Returns the chromaticy white point
Imagick::getImageWidth — Returns the image width
Imagick::getImage — Returns a new Imagick object
Imagick::getInterlaceScheme — Gets the object interlace scheme
Imagick::getImageOrientation — Gets the image orientation.
Imagick::getNumberImages — Returns the number of images in the object
Imagick::getOption — Returns a value associated with the specified key
Imagick::getPackageName — Returns the ImageMagick package name
Imagick::getPage — Returns the page geometry
Imagick::getPixelIterator — Returns a MagickPixelIterator
Imagick::getPixelRegionIterator — Get an ImagickPixelIterator for an image section
Imagick::getQuantumDepth — Gets the quantum depth
Imagick::getQuantumRange — Returns the Imagick quantum range
Imagick::getReleaseDate — Returns the ImageMagick release date
Imagick::getResourceLimit — Returns the specified resource limit
Imagick::getResource — Returns the specified resource's memory usage
Imagick::getSamplingFactors — Gets the horizontal and vertical sampling factor
Imagick::getSizeOffset — Returns the size offset
Imagick::getSize — Returns the size associated with the Imagick object
Imagick::getVersion — Returns the ImageMagick API version
Imagick::hasNextImage — Checks if the object has more images
Imagick::hasPreviousImage — Checks if the object has a previous image
Imagick::identifyImage — Identifies an image and fetches attributes
Imagick::implodeImage — Creates a new image as a copy
Imagick::labelImage — Adds a label to an image
Imagick::levelImage — Adjusts the levels of an image
Imagick::linearStretchImage — Stretches with saturation the image intensity
Imagick::magnifyImage — Scales an image proportionally 2x
Imagick::matteFloodfillImage — Changes the transparency value of a color
Imagick::medianFilterImage — Applies a digital filter
Imagick::minifyImage — Scales an image proportionally to half its size
Imagick::modulateImage — Control the brightness, saturation, and hue
Imagick::montageImage — Creates a composite image
Imagick::morphImages — Method morphs a set of images
Imagick::compareImages — Compares an image to a reconstructed image
Imagick::mosaicImages — Forms a mosaic from images
Imagick::motionBlurImage — Simulates motion blur
Imagick::negateImage — Negates the colors in the reference image
Imagick::distortImage — Distorts an image using various distortion methods
Imagick::newImage — Creates a new image
Imagick::setImage — Replaces image in the object
Imagick::setImageOpacity — Sets the image opacity level
Imagick::newPseudoImage — Creates a new image
Imagick::nextImage — Moves to the next image
Imagick::normalizeImage — Enhances the contrast of a color image
Imagick::oilPaintImage — Simulates an oil painting
Imagick::optimizeImageLayers — Removes repeated portions of images to optimize
Imagick::paintOpaqueImage — Change any pixel that matches color
Imagick::paintTransparentImage — Changes any pixel that matches color with the color defined by fill
Imagick::pingImageBlob — Quickly fetch attributes
Imagick::pingImageFile — Get basic image attributes in a lightweight manner
Imagick::pingImage — Fetch basic attributes about the image
Imagick::posterizeImage — Reduces the image to a limited number of color level
Imagick::previousImage — Move to the previous image in the object
Imagick::profileImage — Adds or removes a profile from an image
Imagick::queryFormats — Returns formats supported by Imagick
Imagick::radialBlurImage — Radial blurs an image
Imagick::raiseImage — Creates a simulated 3d button-like effect
Imagick::randomThresholdImage — Creates a high-contrast, two-color image
Imagick::readImageBlob — Reads image from a binary string
Imagick::readImageFile — Reads image from open filehandle
Imagick::readImage — Reads image from filename
Imagick::reduceNoiseImage — Smooths the contours of an image
Imagick::removeImageProfile — Removes the named image profile and returns it
Imagick::removeImage — Removes an image from the image list
Imagick::render — Renders all preceding drawing commands
Imagick::resampleImage — Resample image to desired resolution
Imagick::resizeImage — Scales an image
Imagick::rollImage — Offsets an image
Imagick::rotateImage — Rotates an image
Imagick::sampleImage — Scales an image with pixel sampling
Imagick::scaleImage — Scales the size of an image
Imagick::separateImageChannel — Separates a channel from the image
Imagick::sepiaToneImage — Sepia tones an image
Imagick::setBackgroundColor — Sets the object's default background color
Imagick::setCompressionQuality — Sets the object's default compression quality
Imagick::setCompression — Sets the object's default compression type
Imagick::setFilename — Sets the filename before you read or write the image
Imagick::setFirstIterator — Sets the Imagick iterator to the first image
Imagick::setLastIterator — Sets the Imagick iterator to the last image
Imagick::setFormat — Sets the format of the Imagick object
Imagick::setImageBackgroundColor — Sets the image background color
Imagick::setImageBias — Sets the image bias for any method that convolves an image
Imagick::setImageBluePrimary — Sets the image chromaticity blue primary point
Imagick::setImageBorderColor — Sets the image border color
Imagick::setImageChannelDepth — Sets the depth of a particular image channel
Imagick::setImageColormapColor — Sets the color of the specified colormap index
Imagick::setImageColorspace — Sets the image colorspace
Imagick::setImageCompose — Sets the image composite operator
Imagick::setImageCompression — Sets the image compression
Imagick::setImageDelay — Sets the image delay
Imagick::setImageDepth — Sets the image depth
Imagick::setImageDispose — Sets the image disposal method
Imagick::setImageExtent — Sets the image size
Imagick::setImageFilename — Sets the filename of a particular image
Imagick::setImageFormat — Sets the format of a particular image
Imagick::setImageGamma — Sets the image gamma
Imagick::setImageGreenPrimary — Sets the image chromaticity green primary point
Imagick::setImageIndex — Set the iterator position
Imagick::setIteratorIndex — Set the iterator position
Imagick::setImageInterlaceScheme — Sets the image compression
Imagick::setImageInterpolateMethod — Sets the image interpolate pixel method
Imagick::setImageIterations — Sets the image iterations
Imagick::setImageMatteColor — Sets the image matte color
Imagick::setImageMatte — Sets the image matte channel
Imagick::setImagePage — Sets the page geometry of the image
Imagick::setImageProfile — Adds a named profile to the Imagick object
Imagick::setImageProperty — Sets an image property
Imagick::setImageRedPrimary — Sets the image chromaticity red primary point
Imagick::setImageRenderingIntent — Sets the image rendering intent
Imagick::setImageResolution — Sets the image resolution
Imagick::setImageScene — Sets the image scene
Imagick::setImageTicksPerSecond — Sets the image ticks-per-second
Imagick::setImageType — Sets the image type
Imagick::setImageUnits — Sets the image units of resolution
Imagick::setImageVirtualPixelMethod — Sets the image virtual pixel method
Imagick::setImageWhitePoint — Sets the image chromaticity white point
Imagick::setInterlaceScheme — Sets the image compression
Imagick::setImageOrientation — Sets the image orientation.
Imagick::setOption — Set an option
Imagick::setPage — Sets the page geometry of the Imagick object
Imagick::setResolution — Sets the image resolution
Imagick::setResourceLimit — Sets the limit for a particular resource in megabytes
Imagick::setSamplingFactors — Sets the image sampling factors
Imagick::setSizeOffset — Sets the size and offset of the Imagick object
Imagick::setSize — Sets the size of the Imagick object
Imagick::setType — Sets the image type attribute
Imagick::shadeImage — Creates a 3D effect
Imagick::shadowImage — Simulates an image shadow
Imagick::sharpenImage — Sharpens an image
Imagick::shaveImage — Shaves pixels from the image edges
Imagick::shearImage — Creating a parallelogram
Imagick::sigmoidalContrastImage — Adjusts the contrast of an image
Imagick::sketchImage — Simulates a pencil sketch
Imagick::solarizeImage — Applies a solarizing effect to the image
Imagick::spliceImage — Splices a solid color into the image
Imagick::spreadImage — Randomly displaces each pixel in a block
Imagick::steganoImage — Hides a digital watermark within the image
Imagick::stereoImage — Composites two images
Imagick::stripImage — Strips an image of all profiles and comments
Imagick::swirlImage — Swirls the pixels about the center of the image
Imagick::textureImage — Repeatedly tiles the texture image
Imagick::thresholdImage — Changes the value of individual pixels based on a threshold
Imagick::thumbnailImage — Changes the size of an image
Imagick::tintImage — Applies a color vector to each pixel in the image
Imagick::transverseImage — Creates a horizontal mirror image
Imagick::trimImage — Remove edges from the image
Imagick::uniqueImageColors — Discards all but one of any pixel color
Imagick::unsharpMaskImage — Sharpens an image
Imagick::valid — Checks if the current item is valid
Imagick::vignetteImage — Adds vignette filter to the image
Imagick::waveImage — Adds wave filter to the image
Imagick::whiteThresholdImage — Force all pixels above the threshold into white
Imagick::writeImages — Writes an image or image sequence
Imagick::writeImage — Writes an image to the specified filename
Imagick::displayImage — Displays an image
Imagick::displayImages — Displays an image or image sequence
Imagick::cropThumbnailImage — Creates a crop thumbnail
Imagick::roundCorners — Rounds image corners
Imagick::polaroidImage — Simulates a Polaroid picture
Imagick::queryFonts — Returns the configured fonts
Imagick::queryFontMetrics — Returns an array representing the font metrics
ImagickDraw::affine — Adjusts the current affine transformation matrix
ImagickDraw::annotation — Draws text on the image
ImagickDraw::arc — Draws an arc
ImagickDraw::bezier — Draws a bezier curve
ImagickDraw::circle — Draws a circle
ImagickDraw::clear — Clears the ImagickDraw
ImagickDraw::clone — Makes an exact copy of the specified ImagickDraw object
ImagickDraw::color — Draws color on image
ImagickDraw::comment — Adds a comment
ImagickDraw::composite — Composites an image onto the current image
ImagickDraw::__construct — The ImagickDraw constructor
ImagickDraw::destroy — Frees all associated resources
ImagickDraw::ellipse — Draws an ellipse on the image
ImagickDraw::getClipPath — Obtains the current clipping path ID
ImagickDraw::getClipRule — Returns the current polygon fill rule
ImagickDraw::getClipUnits — Returns the interpretation of clip path units
ImagickDraw::getFillColor — Returns the fill color
ImagickDraw::getFillOpacity — Returns the opacity used when drawing
ImagickDraw::getFillRule — Returns the fill rule
ImagickDraw::getFontFamily — Returns the font family
ImagickDraw::getFontSize — Returns the font pointsize
ImagickDraw::getFontStyle — Returns the font style
ImagickDraw::getFontWeight — Returns the font weight
ImagickDraw::getFont — Returns the font
ImagickDraw::getGravity — Returns the text placement gravity
ImagickDraw::getStrokeAntialias — Returns the current stroke antialias setting
ImagickDraw::getStrokeColor — Returns the color used for stroking object outlines
ImagickDraw::getStrokeDashArray — Returns an array representing the pattern of dashes and gaps used to stroke paths
ImagickDraw::getStrokeDashOffset — Returns the offset into the dash pattern to start the dash
ImagickDraw::getStrokeLineCap — Returns the shape to be used at the end of open subpaths when they are stroked
ImagickDraw::getStrokeLineJoin — Returns the shape to be used at the corners of paths when they are stroked
ImagickDraw::getStrokeMiterLimit — Returns the stroke miter limit
ImagickDraw::getStrokeOpacity — Returns the opacity of stroked object outlines
ImagickDraw::getStrokeWidth — Returns the width of the stroke used to draw object outlines
ImagickDraw::getTextAlignment — Returns the text alignment
ImagickDraw::getTextAntialias — Returns the current text antialias setting
ImagickDraw::getTextDecoration — Returns the text decoration
ImagickDraw::getTextEncoding — Returns the code set used for text annotations
ImagickDraw::getTextUnderColor — Returns the text under color
ImagickDraw::getVectorGraphics — Returns a string containing vector graphics
ImagickDraw::line — Draws a line
ImagickDraw::matte — Paints on the image's opacity channel
ImagickDraw::pathClose — Adds a path element to the current path
ImagickDraw::pathCurveToAbsolute — Draws a cubic Bezier curve
ImagickDraw::pathCurveToQuadraticBezierAbsolute — Draws a quadratic Bezier curve
ImagickDraw::pathCurveToQuadraticBezierRelative — Draws a quadratic Bezier curve
ImagickDraw::pathCurveToQuadraticBezierSmoothAbsolute — Draws a quadratic Bezier curve
ImagickDraw::pathCurveToQuadraticBezierSmoothRelative — Draws a quadratic Bezier curve
ImagickDraw::pathCurveToRelative — Draws a cubic Bezier curve
ImagickDraw::pathCurveToSmoothAbsolute — Draws a cubic Bezier curve
ImagickDraw::pathCurveToSmoothRelative — Draws a cubic Bezier curve
ImagickDraw::pathEllipticArcAbsolute — Draws an elliptical arc
ImagickDraw::pathEllipticArcRelative — Draws an elliptical arc
ImagickDraw::pathFinish — Terminates the current path
ImagickDraw::pathLineToAbsolute — Draws a line path
ImagickDraw::pathLineToHorizontalAbsolute — Draws a horizontal line path
ImagickDraw::pathLineToHorizontalRelative — Draws a horizontal line
ImagickDraw::pathLineToRelative — Draws a line path
ImagickDraw::pathLineToVerticalAbsolute — Draws a vertical line
ImagickDraw::pathLineToVerticalRelative — Draws a vertical line path
ImagickDraw::pathMoveToAbsolute — Starts a new sub-path
ImagickDraw::pathMoveToRelative — Starts a new sub-path
ImagickDraw::pathStart — Declares the start of a path drawing list
ImagickDraw::point — Draws a point
ImagickDraw::polygon — Draws a polygon
ImagickDraw::polyline — Draws a polyline
ImagickDraw::popClipPath — Terminates a clip path definition
ImagickDraw::popDefs — Terminates a definition list
ImagickDraw::pop — Destroys the current ImagickDraw in the stack, and returns to the previously pushed ImagickDraw
ImagickDraw::popPattern — Terminates a pattern definition
ImagickDraw::pushClipPath — Starts a clip path definition
ImagickDraw::pushDefs — Indicates that following commands create named elements for early processing
ImagickDraw::push — Clones the current ImagickDraw and pushes it to the stack
ImagickDraw::pushPattern — Indicates that subsequent commands up to a ImagickDraw::opPattern() command comprise the definition of a named pattern
ImagickDraw::rectangle — Draws a rectangle
ImagickDraw::render — Renders all preceding drawing commands onto the image
ImagickDraw::rotate — Applies the specified rotation to the current coordinate space
ImagickDraw::roundRectangle — Draws a rounted rectangle
ImagickDraw::scale — Adjusts the scaling factor
ImagickDraw::setClipPath — Associates a named clipping path with the image
ImagickDraw::setClipRule — Set the polygon fill rule to be used by the clipping path
ImagickDraw::setClipUnits — Sets the interpretation of clip path units
ImagickDraw::setFillAlpha — Sets the opacity to use when drawing using the fill color or fill texture
ImagickDraw::setFillColor — Sets the fill color to be used for drawing filled objects
ImagickDraw::setFillOpacity — Sets the opacity to use when drawing using the fill color or fill texture
ImagickDraw::setFillPatternURL — Sets the URL to use as a fill pattern for filling objects
ImagickDraw::setFillRule — Sets the fill rule to use while drawing polygons
ImagickDraw::setFontFamily — Sets the font family to use when annotating with text
ImagickDraw::setFontSize — Sets the font pointsize to use when annotating with text
ImagickDraw::setFontStretch — Sets the font stretch to use when annotating with text
ImagickDraw::setFontStyle — Sets the font style to use when annotating with text
ImagickDraw::setFontWeight — Sets the font weight
ImagickDraw::setFont — Sets the fully-specified font to use when annotating with text
ImagickDraw::setGravity — Sets the text placement gravity
ImagickDraw::setStrokeAlpha — Specifies the opacity of stroked object outlines
ImagickDraw::setStrokeAntialias — Controls whether stroked outlines are antialiased
ImagickDraw::setStrokeColor — Sets the color used for stroking object outlines
ImagickDraw::setStrokeDashArray — Specifies the pattern of dashes and gaps used to stroke paths
ImagickDraw::setStrokeDashOffset — Specifies the offset into the dash pattern to start the dash
ImagickDraw::setStrokeLineCap — Specifies the shape to be used at the end of open subpaths when they are stroked
ImagickDraw::setStrokeLineJoin — Specifies the shape to be used at the corners of paths when they are stroked
ImagickDraw::setStrokeMiterLimit — Specifies the miter limit
ImagickDraw::setStrokeOpacity — Specifies the opacity of stroked object outlines
ImagickDraw::setStrokePatternURL — Sets the pattern used for stroking object outlines
ImagickDraw::setStrokeWidth — Sets the width of the stroke used to draw object outlines
ImagickDraw::setTextAlignment — Specifies a text alignment
ImagickDraw::setTextAntialias — Controls whether text is antialiased
ImagickDraw::setTextDecoration — Specifies a decoration
ImagickDraw::setTextEncoding — Specifies specifies the text code set
ImagickDraw::setTextUnderColor — Specifies the color of a background rectangle
ImagickDraw::setVectorGraphics — Sets the vector graphics
ImagickDraw::setViewbox — Sets the overall canvas size
ImagickDraw::skewX — Skews the current coordinate system in the horizontal direction
ImagickDraw::skewY — Skews the current coordinate system in the vertical direction
ImagickDraw::translate — Applies a translation to the current coordinate system
ImagickPixel::clear — Clears resources associated with this object
ImagickPixel::__construct — The ImagickPixel constructor
ImagickPixel::destroy — Deallocates resources associated with this object
ImagickPixel::getColor — Returns the color
ImagickPixel::getColorCount — Returns the color count associated with this color
ImagickPixel::getColorValue — Gets the normalized value of the provided color channel
ImagickPixel::getHSL — Returns the normalized HSL color of the ImagickPixel object
ImagickPixel::isSimilar — Check the distance between this color and another
ImagickPixel::setColorValue — Sets the normalized value of one of the channels
ImagickPixel::setColor — Sets the color
ImagickPixel::setHSL — Sets the normalized HSL color
ImagickPixelIterator::clear — Clear resources associated with a PixelIterator
ImagickPixelIterator::__construct — The ImagickPixelIterator constructor
ImagickPixelIterator::destroy — Deallocates resources associated with a PixelIterator
ImagickPixelIterator::getCurrentIteratorRow — Returns the current row of ImagickPixel objects
ImagickPixelIterator::getIteratorRow — Returns the current pixel iterator row
ImagickPixelIterator::getNextIteratorRow — Returns the next row of the pixel iterator
ImagickPixelIterator::getPreviousIteratorRow — Returns the previous row
ImagickPixelIterator::newPixelIterator — Returns a new pixel iterator
ImagickPixelIterator::newPixelRegionIterator — Returns a new pixel iterator
ImagickPixelIterator::resetIterator — Resets the pixel iterator
ImagickPixelIterator::setIteratorFirstRow — Sets the pixel iterator to the first pixel row
ImagickPixelIterator::setIteratorLastRow — Sets the pixel iterator to the last pixel row
ImagickPixelIterator::setIteratorRow — Set the pixel iterator row
ImagickPixelIterator::syncIterator — Syncs the pixel iterator
LXVII. IMAP
imap_8bit — Convert an 8bit string to a quoted-printable string
imap_alerts — Returns all IMAP alert messages that have occurred
imap_append — Append a string message to a specified mailbox
imap_base64 — Decode BASE64 encoded text
imap_binary — Convert an 8bit string to a base64 string
imap_body — Read the message body
imap_bodystruct — Read the structure of a specified body section of a specific message
imap_check — Check current mailbox
imap_clearflag_full — Clears flags on messages
imap_close — Close an IMAP stream
imap_createmailbox — Create a new mailbox
imap_delete — Mark a message for deletion from current mailbox
imap_deletemailbox — Delete a mailbox
imap_errors — Returns all of the IMAP errors that have occured
imap_expunge — Delete all messages marked for deletion
imap_fetch_overview — Read an overview of the information in the headers of the given message
imap_fetchbody — Fetch a particular section of the body of the message
imap_fetchheader — Returns header for a message
imap_fetchstructure — Read the structure of a particular message
imap_get_quota — Retrieve the quota level settings, and usage statics per mailbox
imap_get_quotaroot — Retrieve the quota settings per user
imap_getacl — Gets the ACL for a given mailbox
imap_getmailboxes — Read the list of mailboxes, returning detailed information on each one
imap_getsubscribed — List all the subscribed mailboxes
imap_header — Alias of imap_headerinfo()
imap_headerinfo — Read the header of the message
imap_headers — Returns headers for all messages in a mailbox
imap_last_error — Gets the last IMAP error that occurred during this page request
imap_list — Read the list of mailboxes
imap_listmailbox — Alias of imap_list()
imap_listscan — Returns the list of mailboxes that matches the given text
imap_listsubscribed — Alias of imap_lsub()
imap_lsub — List all the subscribed mailboxes
imap_mail_compose — Create a MIME message based on given envelope and body sections
imap_mail_copy — Copy specified messages to a mailbox
imap_mail_move — Move specified messages to a mailbox
imap_mail — Send an email message
imap_mailboxmsginfo — Get information about the current mailbox
imap_mime_header_decode — Decode MIME header elements
imap_msgno — Gets the message sequence number for the given UID
imap_num_msg — Gets the number of messages in the current mailbox
imap_num_recent — Gets the number of recent messages in current mailbox
imap_open — Open an IMAP stream to a mailbox
imap_ping — Check if the IMAP stream is still active
imap_qprint — Convert a quoted-printable string to an 8 bit string
imap_renamemailbox — Rename an old mailbox to new mailbox
imap_reopen — Reopen IMAP stream to new mailbox
imap_rfc822_parse_adrlist — Parses an address string
imap_rfc822_parse_headers — Parse mail headers from a string
imap_rfc822_write_address — Returns a properly formatted email address given the mailbox, host, and personal info
imap_savebody — Save a specific body section to a file
imap_scanmailbox — Alias of imap_listscan()
imap_search — This function returns an array of messages matching the given search criteria
imap_set_quota — Sets a quota for a given mailbox
imap_setacl — Sets the ACL for a giving mailbox
imap_setflag_full — Sets flags on messages
imap_sort — Gets and sort messages
imap_status — Returns status information on a mailbox
imap_subscribe — Subscribe to a mailbox
imap_thread — Returns a tree of threaded message
imap_timeout — Set or fetch imap timeout
imap_uid — This function returns the UID for the given message sequence number
imap_undelete — Unmark the message which is marked deleted
imap_unsubscribe — Unsubscribe from a mailbox
imap_utf7_decode — Decodes a modified UTF-7 encoded string
imap_utf7_encode — Converts ISO-8859-1 string to modified UTF-7 text
imap_utf8 — Converts MIME-encoded text to UTF-8
LXVIII. Informix
ifx_affected_rows — Get number of rows affected by a query
ifx_blobinfile_mode — Set the default blob mode for all select queries
ifx_byteasvarchar — Set the default byte mode
ifx_close — Close Informix connection
ifx_connect — Open Informix server connection
ifx_copy_blob — Duplicates the given blob object
ifx_create_blob — Creates an blob object
ifx_create_char — Creates an char object
ifx_do — Execute a previously prepared SQL-statement
ifx_error — Returns error code of last Informix call
ifx_errormsg — Returns error message of last Informix call
ifx_fetch_row — Get row as an associative array
ifx_fieldproperties — List of SQL fieldproperties
ifx_fieldtypes — List of Informix SQL fields
ifx_free_blob — Deletes the blob object
ifx_free_char — Deletes the char object
ifx_free_result — Releases resources for the query
ifx_get_blob — Return the content of a blob object
ifx_get_char — Return the content of the char object
ifx_getsqlca — Get the contents of sqlca.sqlerrd[0..5] after a query
ifx_htmltbl_result — Formats all rows of a query into a HTML table
ifx_nullformat — Sets the default return value on a fetch row
ifx_num_fields — Returns the number of columns in the query
ifx_num_rows — Count the rows already fetched from a query
ifx_pconnect — Open persistent Informix connection
ifx_prepare — Prepare an SQL-statement for execution
ifx_query — Send Informix query
ifx_textasvarchar — Set the default text mode
ifx_update_blob — Updates the content of the blob object
ifx_update_char — Updates the content of the char object
ifxus_close_slob — Deletes the slob object
ifxus_create_slob — Creates an slob object and opens it
ifxus_free_slob — Deletes the slob object
ifxus_open_slob — Opens an slob object
ifxus_read_slob — Reads nbytes of the slob object
ifxus_seek_slob — Sets the current file or seek position
ifxus_tell_slob — Returns the current file or seek position
ifxus_write_slob — Writes a string into the slob object
LXIX. Informix (PDO)
PDO_INFORMIX DSN — Connecting to Informix databases
LXX. Ingres II
ingres_autocommit — Switch autocommit on or off
ingres_close — Close an Ingres II database connection
ingres_commit — Commit a transaction
ingres_connect — Open a connection to an Ingres database
ingres_cursor — Gets a cursor name for a given link resource
ingres_errno — Gets the last ingres error number generated
ingres_error — Gets a meaningful error message for the last error generated
ingres_errsqlstate — Gets the last SQLSTATE error code generated
ingres_fetch_array — Fetch a row of result into an array
ingres_fetch_object — Fetch a row of result into an object
ingres_fetch_row — Fetch a row of result into an enumerated array
ingres_field_length — Get the length of a field
ingres_field_name — Get the name of a field in a query result
ingres_field_nullable — Test if a field is nullable
ingres_field_precision — Get the precision of a field
ingres_field_scale — Get the scale of a field
ingres_field_type — Get the type of a field in a query result
ingres_num_fields — Get the number of fields returned by the last query
ingres_num_rows — Get the number of rows affected or returned by the last query
ingres_pconnect — Open a persistent connection to an Ingres II database
ingres_query — Send a SQL query to Ingres II
ingres_rollback — Roll back a transaction
LXXI. IRC Gateway
ircg_channel_mode — Set channel mode flags for user
ircg_disconnect — Close connection to server
ircg_eval_ecmascript_params — Decodes a list of JS-encoded parameters
ircg_fetch_error_msg — Returns the error from previous IRCG operation
ircg_get_username — Get username for connection
ircg_html_encode — Encodes HTML preserving output
ircg_ignore_add — Add a user to your ignore list on a server
ircg_ignore_del — Remove a user from your ignore list on a server
ircg_invite — Invites nickname to channel
ircg_is_conn_alive — Check connection status
ircg_join — Join a channel on a connected server
ircg_kick — Kick a user out of a channel on server
ircg_list — List topic/user count of channel(s)
ircg_lookup_format_messages — Check for the existence of a format message set
ircg_lusers — IRC network statistics
ircg_msg — Send message to channel or user on server
ircg_names — Query visible usernames
ircg_nick — Change nickname on server
ircg_nickname_escape — Encode special characters in nickname to be IRC-compliant
ircg_nickname_unescape — Decodes encoded nickname
ircg_notice — Send a notice to a user on server
ircg_oper — Elevates privileges to IRC OPER
ircg_part — Leave a channel on server
ircg_pconnect — Connect to an IRC server
ircg_register_format_messages — Register a format message set
ircg_set_current — Set current connection for output
ircg_set_file — Set logfile for connection
ircg_set_on_die — Set action to be executed when connection dies
ircg_topic — Set topic for channel on server
ircg_who — Queries server for WHO information
ircg_whois — Query server for user information
LXXII. Java
java_last_exception_clear — Clear last Java exception
java_last_exception_get — Get last Java exception
LXXIII. JSON
json_decode — Decodes a JSON string
json_encode — Returns the JSON representation of a value
LXXIV. kadm5
kadm5_chpass_principal — Changes the principal's password
kadm5_create_principal — Creates a kerberos principal with the given parameters
kadm5_delete_principal — Deletes a kerberos principal
kadm5_destroy — Closes the connection to the admin server and releases all related resources
kadm5_flush — Flush all changes to the Kerberos database, leaving the connection to the Kerberos admin server open
kadm5_get_policies — Gets all policies from the Kerberos database
kadm5_get_principal — Gets the principal's entries from the Kerberos database
kadm5_get_principals — Gets all principals from the Kerberos database
kadm5_init_with_password — Opens a connection to the KADM5 library and initializes any neccessary state information
kadm5_modify_principal — Modifies a kerberos principal with the given parameters
LXXV. LDAP
ldap_8859_to_t61 — Translate 8859 characters to t61 characters
ldap_add — Add entries to LDAP directory
ldap_bind — Bind to LDAP directory
ldap_close — Alias of ldap_unbind()
ldap_compare — Compare value of attribute found in entry specified with DN
ldap_connect — Connect to an LDAP server
ldap_count_entries — Count the number of entries in a search
ldap_delete — Delete an entry from a directory
ldap_dn2ufn — Convert DN to User Friendly Naming format
ldap_err2str — Convert LDAP error number into string error message
ldap_errno — Return the LDAP error number of the last LDAP command
ldap_error — Return the LDAP error message of the last LDAP command
ldap_explode_dn — Splits DN into its component parts
ldap_first_attribute — Return first attribute
ldap_first_entry — Return first result id
ldap_first_reference — Return first reference
ldap_free_result — Free result memory
ldap_get_attributes — Get attributes from a search result entry
ldap_get_dn — Get the DN of a result entry
ldap_get_entries — Get all result entries
ldap_get_option — Get the current value for given option
ldap_get_values_len — Get all binary values from a result entry
ldap_get_values — Get all values from a result entry
ldap_list — Single-level search
ldap_mod_add — Add attribute values to current attributes
ldap_mod_del — Delete attribute values from current attributes
ldap_mod_replace — Replace attribute values with new ones
ldap_modify — Modify an LDAP entry
ldap_next_attribute — Get the next attribute in result
ldap_next_entry — Get next result entry
ldap_next_reference — Get next reference
ldap_parse_reference — Extract information from reference entry
ldap_parse_result — Extract information from result
ldap_read — Read an entry
ldap_rename — Modify the name of an entry
ldap_sasl_bind — Bind to LDAP directory using SASL
ldap_search — Search LDAP tree
ldap_set_option — Set the value of the given option
ldap_set_rebind_proc — Set a callback function to do re-binds on referral chasing
ldap_sort — Sort LDAP result entries
ldap_start_tls — Start TLS
ldap_t61_to_8859 — Translate t61 characters to 8859 characters
ldap_unbind — Unbind from LDAP directory
LXXVI. libxml
libxml_clear_errors — Clear libxml error buffer
libxml_get_errors — Retrieve array of errors
libxml_get_last_error — Retrieve last error from libxml
libxml_set_streams_context — Set the streams context for the next libxml document load or write
libxml_use_internal_errors — Disable libxml errors and allow user to fetch error information as needed
LXXVII. Lotus Notes
notes_body — Open the message msg_number in the specified mailbox on the specified server (leave serv
notes_copy_db — Copy a Lotus Notes database
notes_create_db — Create a Lotus Notes database
notes_create_note — Create a note using form form_name
notes_drop_db — Drop a Lotus Notes database
notes_find_note — Returns a note id found in database_name
notes_header_info — Open the message msg_number in the specified mailbox on the specified server (leave serv
notes_list_msgs — Returns the notes from a selected database_name
notes_mark_read — Mark a note_id as read for the User user_name
notes_mark_unread — Mark a note_id as unread for the User user_name
notes_nav_create — Create a navigator name, in database_name
notes_search — Find notes that match keywords in database_name
notes_unread — Returns the unread note id's for the current User user_name
notes_version — Get the version Lotus Notes
LXXVIII. LZF
lzf_compress — LZF compression
lzf_decompress — LZF decompression
lzf_optimized_for — Determines what LZF extension was optimized for
LXXIX. Mail
ezmlm_hash — Calculate the hash value needed by EZMLM
mail — Send mail
LXXX. Mailparse
mailparse_determine_best_xfer_encoding — Gets the best way of encoding
mailparse_msg_create — Create a mime mail resource
mailparse_msg_extract_part_file — Extracts/decodes a message section
mailparse_msg_extract_part — Extracts/decodes a message section
mailparse_msg_extract_whole_part_file — Extracts a message section including headers without decoding the transfer encoding
mailparse_msg_free — Frees a MIME resource
mailparse_msg_get_part_data — Returns an associative array of info about the message
mailparse_msg_get_part — Returns a handle on a given section in a mimemessage
mailparse_msg_get_structure — Returns an array of mime section names in the supplied message
mailparse_msg_parse_file — Parses a file
mailparse_msg_parse — Incrementally parse data into buffer
mailparse_rfc822_parse_addresses — Parse RFC 822 compliant addresses
mailparse_stream_encode — Streams data from source file pointer, apply encoding and write to destfp
mailparse_uudecode_all — Scans the data from fp and extract each embedded uuencoded file
LXXXI. Math
abs — Absolute value
acos — Arc cosine
acosh — Inverse hyperbolic cosine
asin — Arc sine
asinh — Inverse hyperbolic sine
atan2 — Arc tangent of two variables
atan — Arc tangent
atanh — Inverse hyperbolic tangent
base_convert — Convert a number between arbitrary bases
bindec — Binary to decimal
ceil — Round fractions up
cos — Cosine
cosh — Hyperbolic cosine
decbin — Decimal to binary
dechex — Decimal to hexadecimal
decoct — Decimal to octal
deg2rad — Converts the number in degrees to the radian equivalent
exp — Calculates the exponent of e
expm1 — Returns exp(number) - 1, computed in a way that is accurate even when the value of number is close to zero
floor — Round fractions down
fmod — Returns the floating point remainder (modulo) of the division of the arguments
getrandmax — Show largest possible random value
hexdec — Hexadecimal to decimal
hypot — Calculate the length of the hypotenuse of a right-angle triangle
is_finite — Finds whether a value is a legal finite number
is_infinite — Finds whether a value is infinite
is_nan — Finds whether a value is not a number
lcg_value — Combined linear congruential generator
log10 — Base-10 logarithm
log1p — Returns log(1 + number), computed in a way that is accurate even when the value of number is close to zero
log — Natural logarithm
max — Find highest value
min — Find lowest value
mt_getrandmax — Show largest possible random value
mt_rand — Generate a better random value
mt_srand — Seed the better random number generator
octdec — Octal to decimal
pi — Get value of pi
pow — Exponential expression
rad2deg — Converts the radian number to the equivalent number in degrees
rand — Generate a random integer
round — Rounds a float
sin — Sine
sinh — Hyperbolic sine
sqrt — Square root
srand — Seed the random number generator
tan — Tangent
tanh — Hyperbolic tangent
LXXXII. MaxDB
maxdb_affected_rows — Gets the number of affected rows in a previous MaxDB operation
maxdb_autocommit — Turns on or off auto-commiting database modifications
maxdb_bind_param — Alias of maxdb_stmt_bind_param()
maxdb_bind_result — Alias of maxdb_stmt_bind_result()
maxdb_change_user — Changes the user of the specified database connection
maxdb_character_set_name — Returns the default character set for the database connection
maxdb_client_encoding — Alias of maxdb_character_set_name()
maxdb_close_long_data — Alias of maxdb_stmt_close_long_data()
maxdb_close — Closes a previously opened database connection
maxdb_commit — Commits the current transaction
maxdb_connect_errno — Returns the error code from last connect call
maxdb_connect_error — Returns a string description of the last connect error
maxdb_connect — Open a new connection to the MaxDB server
maxdb_data_seek — Adjusts the result pointer to an arbitary row in the result
maxdb_debug — Performs debugging operations
maxdb_disable_reads_from_master — Disable reads from master
maxdb_disable_rpl_parse — Disable RPL parse
maxdb_dump_debug_info — Dump debugging information into the log
maxdb_embedded_connect — Open a connection to an embedded MaxDB server
maxdb_enable_reads_from_master — Enable reads from master
maxdb_enable_rpl_parse — Enable RPL parse
maxdb_errno — Returns the error code for the most recent function call
maxdb_error — Returns a string description of the last error
maxdb_escape_string — Alias of maxdb_real_escape_string()
maxdb_execute — Alias of maxdb_stmt_execute()
maxdb_fetch_array — Fetch a result row as an associative, a numeric array, or both
maxdb_fetch_assoc — Fetch a result row as an associative array
maxdb_fetch_field_direct — Fetch meta-data for a single field
maxdb_fetch_field — Returns the next field in the result set
maxdb_fetch_fields — Returns an array of resources representing the fields in a result set
maxdb_fetch_lengths — Returns the lengths of the columns of the current row in the result set
maxdb_fetch_object — Returns the current row of a result set as an object
maxdb_fetch_row — Get a result row as an enumerated array
maxdb_fetch — Alias of maxdb_stmt_fetch()
maxdb_field_count — Returns the number of columns for the most recent query
maxdb_field_seek — Set result pointer to a specified field offset
maxdb_field_tell — Get current field offset of a result pointer
maxdb_free_result — Frees the memory associated with a result
maxdb_get_client_info — Returns the MaxDB client version as a string
maxdb_get_client_version — Get MaxDB client info
maxdb_get_host_info — Returns a string representing the type of connection used
maxdb_get_metadata — Alias of maxdb_stmt_result_metadata()
maxdb_get_proto_info — Returns the version of the MaxDB protocol used
maxdb_get_server_info — Returns the version of the MaxDB server
maxdb_get_server_version — Returns the version of the MaxDB server as an integer
maxdb_info — Retrieves information about the most recently executed query
maxdb_init — Initializes MaxDB and returns an resource for use with maxdb_real_connect
maxdb_insert_id — Returns the auto generated id used in the last query
maxdb_kill — Disconnects from a MaxDB server
maxdb_master_query — Enforce execution of a query on the master in a master/slave setup
maxdb_more_results — Check if there any more query results from a multi query
maxdb_multi_query — Performs a query on the database
maxdb_next_result — Prepare next result from multi_query
maxdb_num_fields — Get the number of fields in a result
maxdb_num_rows — Gets the number of rows in a result
maxdb_options — Set options
maxdb_param_count — Alias of maxdb_stmt_param_count()
maxdb_ping — Pings a server connection, or tries to reconnect if the connection has gone down
maxdb_prepare — Prepare a SQL statement for execution
maxdb_query — Performs a query on the database
maxdb_real_connect — Opens a connection to a MaxDB server
maxdb_real_escape_string — Escapes special characters in a string for use in a SQL statement, taking into account the current charset of the connection
maxdb_real_query — Execute an SQL query
maxdb_report — Enables or disables internal report functions
maxdb_rollback — Rolls back current transaction
maxdb_rpl_parse_enabled — Check if RPL parse is enabled
maxdb_rpl_probe — RPL probe
maxdb_rpl_query_type — Returns RPL query type
maxdb_select_db — Selects the default database for database queries
maxdb_send_long_data — Alias of maxdb_stmt_send_long_data()
maxdb_send_query — Send the query and return
maxdb_server_end — Shut down the embedded server
maxdb_server_init — Initialize embedded server
maxdb_set_opt — Alias of maxdb_options()
maxdb_sqlstate — Returns the SQLSTATE error from previous MaxDB operation
maxdb_ssl_set — Used for establishing secure connections using SSL
maxdb_stat — Gets the current system status
maxdb_stmt_affected_rows — Returns the total number of rows changed, deleted, or inserted by the last executed statement
maxdb_stmt_bind_param — Binds variables to a prepared statement as parameters
maxdb_stmt_bind_result — Binds variables to a prepared statement for result storage
maxdb_stmt_close_long_data — Ends a sequence of maxdb_stmt_send_long_data()
maxdb_stmt_close — Closes a prepared statement
maxdb_stmt_data_seek — Seeks to an arbitray row in statement result set
maxdb_stmt_errno — Returns the error code for the most recent statement call
maxdb_stmt_error — Returns a string description for last statement error
maxdb_stmt_execute — Executes a prepared Query
maxdb_stmt_fetch — Fetch results from a prepared statement into the bound variables
maxdb_stmt_free_result — Frees stored result memory for the given statement handle
maxdb_stmt_init — Initializes a statement and returns an resource for use with maxdb_stmt_prepare
maxdb_stmt_num_rows — Return the number of rows in statements result set
maxdb_stmt_param_count — Returns the number of parameter for the given statement
maxdb_stmt_prepare — Prepare a SQL statement for execution
maxdb_stmt_reset — Resets a prepared statement
maxdb_stmt_result_metadata — Returns result set metadata from a prepared statement
maxdb_stmt_send_long_data — Send data in blocks
maxdb_stmt_sqlstate — Returns SQLSTATE error from previous statement operation
maxdb_stmt_store_result — Transfers a result set from a prepared statement
maxdb_store_result — Transfers a result set from the last query
maxdb_thread_id — Returns the thread ID for the current connection
maxdb_thread_safe — Returns whether thread safety is given or not
maxdb_use_result — Initiate a result set retrieval
maxdb_warning_count — Returns the number of warnings from the last query for the given link
LXXXIII. MCAL
mcal_append_event — Store a new event into an MCAL calendar
mcal_close — Close an MCAL stream
mcal_create_calendar — Create a new MCAL calendar
mcal_date_compare — Compares two dates
mcal_date_valid — Returns TRUE if the given year, month, day is a valid date
mcal_day_of_week — Returns the day of the week of the given date
mcal_day_of_year — Returns the day of the year of the given date
mcal_days_in_month — Returns the number of days in a month
mcal_delete_calendar — Delete an MCAL calendar
mcal_delete_event — Delete an event from an MCAL calendar
mcal_event_add_attribute — Adds an attribute and a value to the streams global event structure
mcal_event_init — Initializes a streams global event structure
mcal_event_set_alarm — Sets the alarm of the streams global event structure
mcal_event_set_category — Sets the category of the streams global event structure
mcal_event_set_class — Sets the class of the streams global event structure
mcal_event_set_description — Sets the description of the streams global event structure
mcal_event_set_end — Sets the end date and time of the streams global event structure
mcal_event_set_recur_daily — Sets the recurrence of the streams global event structure
mcal_event_set_recur_monthly_mday — Sets the recurrence of the streams global event structure
mcal_event_set_recur_monthly_wday — Sets the recurrence of the streams global event structure
mcal_event_set_recur_none — Sets the recurrence of the streams global event structure
mcal_event_set_recur_weekly — Sets the recurrence of the streams global event structure
mcal_event_set_recur_yearly — Sets the recurrence of the streams global event structure
mcal_event_set_start — Sets the start date and time of the streams global event structure
mcal_event_set_title — Sets the title of the streams global event structure
mcal_expunge — Deletes all events marked for being expunged
mcal_fetch_current_stream_event — Returns an object containing the current streams event structure
mcal_fetch_event — Fetches an event from the calendar stream
mcal_is_leap_year — Returns if the given year is a leap year or not
mcal_list_alarms — Return a list of events that has an alarm triggered at the given datetime
mcal_list_events — Return a list of IDs for a date or a range of dates
mcal_next_recurrence — Returns the next recurrence of the event
mcal_open — Opens up an MCAL connection
mcal_popen — Opens up a persistent MCAL connection
mcal_rename_calendar — Rename an MCAL calendar
mcal_reopen — Reopens an MCAL connection
mcal_snooze — Turn off an alarm for an event
mcal_store_event — Modify an existing event in an MCAL calendar
mcal_time_valid — Returns TRUE if the given hour, minutes and seconds is a valid time
mcal_week_of_year — Returns the week number of the given date
LXXXIV. mcrypt
mcrypt_cbc — Encrypt/decrypt data in CBC mode
mcrypt_cfb — Encrypt/decrypt data in CFB mode
mcrypt_create_iv — Create an initialization vector (IV) from a random source
mcrypt_decrypt — Decrypts crypttext with given parameters
mcrypt_ecb — Deprecated: Encrypt/decrypt data in ECB mode
mcrypt_enc_get_algorithms_name — Returns the name of the opened algorithm
mcrypt_enc_get_block_size — Returns the blocksize of the opened algorithm
mcrypt_enc_get_iv_size — Returns the size of the IV of the opened algorithm
mcrypt_enc_get_key_size — Returns the maximum supported keysize of the opened mode
mcrypt_enc_get_modes_name — Returns the name of the opened mode
mcrypt_enc_get_supported_key_sizes — Returns an array with the supported keysizes of the opened algorithm
mcrypt_enc_is_block_algorithm_mode — Checks whether the encryption of the opened mode works on blocks
mcrypt_enc_is_block_algorithm — Checks whether the algorithm of the opened mode is a block algorithm
mcrypt_enc_is_block_mode — Checks whether the opened mode outputs blocks
mcrypt_enc_self_test — This function runs a self test on the opened module
mcrypt_encrypt — Encrypts plaintext with given parameters
mcrypt_generic_deinit — This function deinitializes an encryption module
mcrypt_generic_end — This function terminates encryption
mcrypt_generic_init — This function initializes all buffers needed for encryption
mcrypt_generic — This function encrypts data
mcrypt_get_block_size — Get the block size of the specified cipher
mcrypt_get_cipher_name — Get the name of the specified cipher
mcrypt_get_iv_size — Returns the size of the IV belonging to a specific cipher/mode combination
mcrypt_get_key_size — Get the key size of the specified cipher
mcrypt_list_algorithms — Get an array of all supported ciphers
mcrypt_list_modes — Get an array of all supported modes
mcrypt_module_close — Close the mcrypt module
mcrypt_module_get_algo_block_size — Returns the blocksize of the specified algorithm
mcrypt_module_get_algo_key_size — Returns the maximum supported keysize of the opened mode
mcrypt_module_get_supported_key_sizes — Returns an array with the supported keysizes of the opened algorithm
mcrypt_module_is_block_algorithm_mode — Returns if the specified module is a block algorithm or not
mcrypt_module_is_block_algorithm — This function checks whether the specified algorithm is a block algorithm
mcrypt_module_is_block_mode — Returns if the specified mode outputs blocks or not
mcrypt_module_open — Opens the module of the algorithm and the mode to be used
mcrypt_module_self_test — This function runs a self test on the specified module
mcrypt_ofb — Encrypt/decrypt data in OFB mode
mdecrypt_generic — Decrypt data
LXXXV. MCVE
m_checkstatus — Check to see if a transaction has completed
m_completeauthorizations — Number of complete authorizations in queue, returning an array of their identifiers
m_connect — Establish the connection to MCVE
m_connectionerror — Get a textual representation of why a connection failed
m_deletetrans — Delete specified transaction from MCVE_CONN structure
m_destroyconn — Destroy the connection and MCVE_CONN structure
m_destroyengine — Free memory associated with IP/SSL connectivity
m_getcell — Get a specific cell from a comma delimited response by column name
m_getcellbynum — Get a specific cell from a comma delimited response by column number
m_getcommadelimited — Get the RAW comma delimited data returned from MCVE
m_getheader — Get the name of the column in a comma-delimited response
m_initconn — Create and initialize an MCVE_CONN structure
m_initengine — Ready the client for IP/SSL Communication
m_iscommadelimited — Checks to see if response is comma delimited
m_maxconntimeout — The maximum amount of time the API will attempt a connection to MCVE
m_monitor — Perform communication with MCVE (send/receive data) Non-blocking
m_numcolumns — Number of columns returned in a comma delimited response
m_numrows — Number of rows returned in a comma delimited response
m_parsecommadelimited — Parse the comma delimited response so m_getcell, etc will work
m_responsekeys — Returns array of strings which represents the keys that can be used for response parameters on this transaction
m_responseparam — Get a custom response parameter
m_returnstatus — Check to see if the transaction was successful
m_setblocking — Set blocking/non-blocking mode for connection
m_setdropfile — Set the connection method to Drop-File
m_setip — Set the connection method to IP
m_setssl_cafile — Set SSL CA (Certificate Authority) file for verification of server certificate
m_setssl_files — Set certificate key files and certificates if server requires client certificate verification
m_setssl — Set the connection method to SSL
m_settimeout — Set maximum transaction time (per trans)
m_sslcert_gen_hash — Generate hash for SSL client certificate verification
m_transactionssent — Check to see if outgoing buffer is clear
m_transinqueue — Number of transactions in client-queue
m_transkeyval — Add key/value pair to a transaction. Replaces deprecated transparam()
m_transnew — Start a new transaction
m_transsend — Finalize and send the transaction
m_uwait — Wait x microsecs
m_validateidentifier — Whether or not to validate the passed identifier on any transaction it is passed to
m_verifyconnection — Set whether or not to PING upon connect to verify connection
m_verifysslcert — Set whether or not to verify the server ssl certificate
LXXXVI. Memcache
Memcache::add — Add an item to the server
Memcache::addServer — Add a memcached server to connection pool
Memcache::close — Close memcached server connection
Memcache::connect — Open memcached server connection
memcache_debug — Turn debug output on/off
Memcache::decrement — Decrement item's value
Memcache::delete — Delete item from the server
Memcache::flush — Flush all existing items at the server
Memcache::get — Retrieve item from the server
Memcache::getExtendedStats — Get statistics from all servers in pool
Memcache::getServerStatus — Returns server status
Memcache::getStats — Get statistics of the server
Memcache::getVersion — Return version of the server
Memcache::increment — Increment item's value
Memcache::pconnect — Open memcached server persistent connection
Memcache::replace — Replace value of the existing item
Memcache::set — Store data at the server
Memcache::setCompressThreshold — Enable automatic compression of large values
Memcache::setServerParams — Changes server parameters and status at runtime
LXXXVII. mhash
mhash_count — Get the highest available hash id
mhash_get_block_size — Get the block size of the specified hash
mhash_get_hash_name — Get the name of the specified hash
mhash_keygen_s2k — Generates a key
mhash — Compute hash
LXXXVIII. Mimetype
mime_content_type — Detect MIME Content-type for a file (deprecated)
LXXXIX. Ming (flash)
SWFAction — SWFAction Class
SWFAction->__construct() — Creates a new SWFAction
SWFBitmap — SWFBitmap Class
SWFBitmap->__construct() — Loads Bitmap object
SWFBitmap->getHeight() — Returns the bitmap's height
SWFBitmap->getWidth() — Returns the bitmap's width
SWFButton — SWFButton Class
SWFButton->__construct() — Creates a new Button
SWFButton->addAction() — Adds an action
SWFButton->addASound() — Associates a sound with a button transition
SWFButton->addShape() — Adds a shape to a button
SWFButton->setAction() — Sets the action
SWFButton->setDown() — Alias for addShape(shape, SWFBUTTON_DOWN)
SWFButton->setHit() — Alias for addShape(shape, SWFBUTTON_HIT)
SWFButton->setMenu() — enable track as menu button behaviour
SWFButton->setOver() — Alias for addShape(shape, SWFBUTTON_OVER)
SWFButton->setUp() — Alias for addShape(shape, SWFBUTTON_UP)
SWFDisplayItem — SWFDisplayItem Class
SWFDisplayItem->addAction() — Adds this SWFAction to the given SWFSprite instance
SWFDisplayItem->addColor() — Adds the given color to this item's color transform
SWFDisplayItem->endMask() — Another way of defining a MASK layer
SWFDisplayItem->getRot()
SWFDisplayItem->getX()
SWFDisplayItem->getXScale()
SWFDisplayItem->getXSkew()
SWFDisplayItem->getY()
SWFDisplayItem->getYScale()
SWFDisplayItem->getYSkew()
SWFDisplayItem->move() — Moves object in relative coordinates
SWFDisplayItem->moveTo() — Moves object in global coordinates
SWFDisplayItem->multColor() — Multiplies the item's color transform
SWFDisplayItem->remove() — Removes the object from the movie
SWFDisplayItem->rotate() — Rotates in relative coordinates
SWFDisplayItem->rotateTo() — Rotates the object in global coordinates
SWFDisplayItem->scale() — Scales the object in relative coordinates
SWFDisplayItem->scaleTo() — Scales the object in global coordinates
SWFDisplayItem->setDepth() — Sets z-order
SWFDisplayItem->setMaskLevel() — Defines a MASK layer at level
SWFDisplayItem->setMatrix() — Sets the item's transform matrix
SWFDisplayItem->setName() — Sets the object's name
SWFDisplayItem->setRatio() — Sets the object's ratio
SWFDisplayItem->skewX() — Sets the X-skew
SWFDisplayItem->skewXTo() — Sets the X-skew
SWFDisplayItem->skewY() — Sets the Y-skew
SWFDisplayItem->skewYTo() — Sets the Y-skew
SWFFill — SWFFill Class
SWFFill->moveTo() — Moves fill origin
SWFFill->rotateTo() — Sets fill's rotation
SWFFill->scaleTo() — Sets fill's scale
SWFFill->skewXTo() — Sets fill x-skew
SWFFill->skewYTo() — Sets fill y-skew
SWFFont — SWFFont Class
SWFFont->__construct() — Loads a font definition
SWFFont->getAscent() — Returns the ascent of the font, or 0 if not available
SWFFont->getDescent() — Returns the descent of the font, or 0 if not available
SWFFont->getLeading() — Returns the leading of the font, or 0 if not available
SWFFont->getShape() — Returns the glyph shape of a char as a text string
SWFFont->getUTF8Width() — Calculates the width of the given string in this font at full height
SWFFont->getWidth() — Returns the string's width
SWFFontChar — SWFFontChar Class
SWFFontChar->addChars() — Adds characters to a font for exporting font
SWFFontChar->addUTF8Chars() — Adds characters to a font for exporting font
SWFGradient — SWFGradient Class
SWFGradient->__construct() — Creates a gradient object
SWFGradient->addEntry() — Adds an entry to the gradient list
SWFMorph — SWFMorph Class
SWFMorph->__construct() — Creates a new SWFMorph object
SWFMorph->getShape1() — Gets a handle to the starting shape
SWFMorph->getShape2() — Gets a handle to the ending shape
SWFMovie — SWFMovie Class
SWFMovie->__construct() — Creates a new movie object, representing an SWF version 4 movie
SWFMovie->add() — Adds any type of data to a movie
SWFMovie->addExport()
SWFMovie->addFont()
SWFMovie->importChar()
SWFMovie->importFont()
SWFMovie->labelFrame() — Labels a frame
SWFMovie->nextFrame() — Moves to the next frame of the animation
SWFMovie->output() — Dumps your lovingly prepared movie out
SWFMovie->remove() — Removes the object instance from the display list
SWFMovie->save() — Saves the SWF movie in a file
SWFMovie->saveToFile()
SWFMovie->setbackground() — Sets the background color
SWFMovie->setDimension() — Sets the movie's width and height
SWFMovie->setFrames() — Sets the total number of frames in the animation
SWFMovie->setRate() — Sets the animation's frame rate
SWFMovie->startSound()
SWFMovie->stopSound()
SWFMovie->streamMP3() — Streams a MP3 file
SWFMovie->writeExports()
SWFPrebuiltClip — SWFPrebuiltClip Class
SWFPrebuiltClip->__construct() — Returns a SWFPrebuiltClip object
SWFShape — SWFShape Class
SWFShape->__construct() — Creates a new shape object
SWFShape->addFill() — Adds a solid fill to the shape
SWFShape->drawArc() — Draws an arc of radius r centered at the current location, from angle startAngle to angle endAngle measured clockwise from 12 o'clock
SWFShape->drawCircle() — Draws a circle of radius r centered at the current location, in a counter-clockwise fashion
SWFShape->drawCubic() — Draws a cubic bezier curve using the current position and the three given points as control points
SWFShape->drawCubicTo() — Draws a cubic bezier curve using the current position and the three given points as control points
SWFShape->drawCurve() — Draws a curve (relative)
SWFShape->drawCurveTo() — Draws a curve
SWFShape->drawGlyph() — Draws the first character in the given string into the shape using the glyph definition from the given font
SWFShape->drawLine() — Draws a line (relative)
SWFShape->drawLineTo() — Draws a line
SWFShape->movePen() — Moves the shape's pen (relative)
SWFShape->movePenTo() — Moves the shape's pen
SWFShape->setLeftFill() — Sets left rasterizing color
SWFShape->setLine() — Sets the shape's line style
SWFShape->setRightFill() — Sets right rasterizing color
SWFSound — SWFSound Class
SWFSound — Returns a new SWFSound object from given file
SWFSoundInstance — SWFSoundInstance Class
SWFSoundInstance->loopCount()
SWFSoundInstance->loopInPoint()
SWFSoundInstance->loopOutPoint()
SWFSoundInstance->noMultiple()
SWFSprite — SWFSprite Class
SWFSprite->__construct() — Creates a movie clip (a sprite)
SWFSprite->add() — Adds an object to a sprite
SWFSprite->labelFrame() — Labels frame
SWFSprite->nextFrame() — Moves to the next frame of the animation
SWFSprite->remove() — Removes an object to a sprite
SWFSprite->setFrames() — Sets the total number of frames in the animation
SWFSprite->startSound()
SWFSprite->stopSound()
SWFText — SWFText Class
SWFText->__construct() — Creates a new SWFText object
SWFText->addString() — Draws a string
SWFText->addUTF8String() — Writes the given text into this SWFText object at the current pen position, using the current font, height, spacing, and color
SWFText->getAscent() — Returns the ascent of the current font at its current size, or 0 if not available
SWFText->getDescent() — Returns the descent of the current font at its current size, or 0 if not available
SWFText->getLeading() — Returns the leading of the current font at its current size, or 0 if not available
SWFText->getUTF8Width() — calculates the width of the given string in this text objects current font and size
SWFText->getWidth() — Computes string's width
SWFText->moveTo() — Moves the pen
SWFText->setColor() — Sets the current text color
SWFText->setFont() — Sets the current font
SWFText->setHeight() — Sets the current font height
SWFText->setSpacing() — Sets the current font spacing
SWFTextField — SWFTextField Class
SWFTextField->__construct() — Creates a text field object
SWFTextField->addChars() — adds characters to a font that will be available within a textfield
SWFTextField->addString() — Concatenates the given string to the text field
SWFTextField->align() — Sets the text field alignment
SWFTextField->setBounds() — Sets the text field width and height
SWFTextField->setColor() — Sets the color of the text field
SWFTextField->setFont() — Sets the text field font
SWFTextField->setHeight() — Sets the font height of this text field font
SWFTextField->setIndentation() — Sets the indentation of the first line
SWFTextField->setLeftMargin() — Sets the left margin width of the text field
SWFTextField->setLineSpacing() — Sets the line spacing of the text field
SWFTextField->setMargins() — Sets the margins width of the text field
SWFTextField->setName() — Sets the variable name
SWFTextField->setPadding() — Sets the padding of this textfield
SWFTextField->setRightMargin() — Sets the right margin width of the text field
SWFVideoStream — SWFVideoStream Class
SWFVideoStream->__construct() — Returns a SWFVideoStream object
SWFVideoStream->getNumFrames()
SWFVideoStream->setDimension()
ming_keypress — Returns the action flag for keyPress(char)
ming_setcubicthreshold — Set cubic threshold
ming_setscale — Set scale
ming_setswfcompression — Sets the SWF output compression
ming_useconstants — Use constant pool
ming_useswfversion — Sets the SWF version
XC. Misc.
connection_aborted — Check whether client disconnected
connection_status — Returns connection status bitfield
connection_timeout — Check if the script timed out
constant — Returns the value of a constant
define — Defines a named constant
defined — Checks whether a given named constant exists
die — Equivalent to exit()
eval — Evaluate a string as PHP code
exit — Output a message and terminate the current script
get_browser — Tells what the user's browser is capable of
__halt_compiler — Halts the compiler execution
highlight_file — Syntax highlighting of a file
highlight_string — Syntax highlighting of a string
ignore_user_abort — Set whether a client disconnect should abort script execution
pack — Pack data into binary string
php_check_syntax — Check the PHP syntax of (and execute) the specified file
php_strip_whitespace — Return source with stripped comments and whitespace
show_source — Alias of highlight_file()
sleep — Delay execution
sys_getloadavg — Gets system load average
time_nanosleep — Delay for a number of seconds and nanoseconds
time_sleep_until — Make the script sleep until the specified time
uniqid — Generate a unique ID
unpack — Unpack data from binary string
usleep — Delay execution in microseconds
XCI. mnoGoSearch
udm_add_search_limit — Add various search limits
udm_alloc_agent_array — Allocate mnoGoSearch session
udm_alloc_agent — Allocate mnoGoSearch session
udm_api_version — Get mnoGoSearch API version
udm_cat_list — Get all the categories on the same level with the current one
udm_cat_path — Get the path to the current category
udm_check_charset — Check if the given charset is known to mnogosearch
udm_check_stored — Check connection to stored
udm_clear_search_limits — Clear all mnoGoSearch search restrictions
udm_close_stored — Close connection to stored
udm_crc32 — Return CRC32 checksum of given string
udm_errno — Get mnoGoSearch error number
udm_error — Get mnoGoSearch error message
udm_find — Perform search
udm_free_agent — Free mnoGoSearch session
udm_free_ispell_data — Free memory allocated for ispell data
udm_free_res — Free mnoGoSearch result
udm_get_doc_count — Get total number of documents in database
udm_get_res_field — Fetch a result field
udm_get_res_param — Get mnoGoSearch result parameters
udm_hash32 — Return Hash32 checksum of gived string
udm_load_ispell_data — Load ispell data
udm_open_stored — Open connection to stored
udm_set_agent_param — Set mnoGoSearch agent session parameters
XCII. MS SQL Server
mssql_bind — Adds a parameter to a stored procedure or a remote stored procedure
mssql_close — Close MS SQL Server connection
mssql_connect — Open MS SQL server connection
mssql_data_seek — Moves internal row pointer
mssql_execute — Executes a stored procedure on a MS SQL server database
mssql_fetch_array — Fetch a result row as an associative array, a numeric array, or both
mssql_fetch_assoc — Returns an associative array of the current row in the result
mssql_fetch_batch — Returns the next batch of records
mssql_fetch_field — Get field information
mssql_fetch_object — Fetch row as object
mssql_fetch_row — Get row as enumerated array
mssql_field_length — Get the length of a field
mssql_field_name — Get the name of a field
mssql_field_seek — Seeks to the specified field offset
mssql_field_type — Gets the type of a field
mssql_free_result — Free result memory
mssql_free_statement — Free statement memory
mssql_get_last_message — Returns the last message from the server
mssql_guid_string — Converts a 16 byte binary GUID to a string
mssql_init — Initializes a stored procedure or a remote stored procedure
mssql_min_error_severity — Sets the lower error severity
mssql_min_message_severity — Sets the lower message severity
mssql_next_result — Move the internal result pointer to the next result
mssql_num_fields — Gets the number of fields in result
mssql_num_rows — Gets the number of rows in result
mssql_pconnect — Open persistent MS SQL connection
mssql_query — Send MS SQL query
mssql_result — Get result data
mssql_rows_affected — Returns the number of records affected by the query
mssql_select_db — Select MS SQL database
XCIII. MS SQL Server (PDO)
PDO_DBLIB DSN — Connecting to Microsoft SQL Server and Sybase databases
XCIV. Msession
msession_connect — Connect to msession server
msession_count — Get session count
msession_create — Create a session
msession_destroy — Destroy a session
msession_disconnect — Close connection to msession server
msession_find — Find all sessions with name and value
msession_get_array — Get array of msession variables
msession_get_data — Get data session unstructured data
msession_get — Get value from session
msession_inc — Increment value in session
msession_list — List all sessions
msession_listvar — List sessions with variable
msession_lock — Lock a session
msession_plugin — Call an escape function within the msession personality plugin
msession_randstr — Get random string
msession_set_array — Set msession variables from an array
msession_set_data — Set data session unstructured data
msession_set — Set value in session
msession_timeout — Set/get session timeout
msession_uniq — Get unique id
msession_unlock — Unlock a session
XCV. mSQL
msql_affected_rows — Returns number of affected rows
msql_close — Close mSQL connection
msql_connect — Open mSQL connection
msql_create_db — Create mSQL database
msql_createdb — Alias of msql_create_db()
msql_data_seek — Move internal row pointer
msql_db_query — Send mSQL query
msql_dbname — Alias of msql_result()
msql_drop_db — Drop (delete) mSQL database
msql_error — Returns error message of last msql call
msql_fetch_array — Fetch row as array
msql_fetch_field — Get field information
msql_fetch_object — Fetch row as object
msql_fetch_row — Get row as enumerated array
msql_field_flags — Get field flags
msql_field_len — Get field length
msql_field_name — Get the name of the specified field in a result
msql_field_seek — Set field offset
msql_field_table — Get table name for field
msql_field_type — Get field type
msql_fieldflags — Alias of msql_field_flags()
msql_fieldlen — Alias of msql_field_len()
msql_fieldname — Alias of msql_field_name()
msql_fieldtable — Alias of msql_field_table()
msql_fieldtype — Alias of msql_field_type()
msql_free_result — Free result memory
msql_list_dbs — List mSQL databases on server
msql_list_fields — List result fields
msql_list_tables — List tables in an mSQL database
msql_num_fields — Get number of fields in result
msql_num_rows — Get number of rows in result
msql_numfields — Alias of msql_num_fields()
msql_numrows — Alias of msql_num_rows()
msql_pconnect — Open persistent mSQL connection
msql_query — Send mSQL query
msql_regcase — Alias of sql_regcase()
msql_result — Get result data
msql_select_db — Select mSQL database
msql_tablename — Alias of msql_result()
msql — Alias of msql_db_query()
XCVI. Multibyte String
mb_check_encoding — Check if the string is valid for the specified encoding
mb_convert_case — Perform case folding on a string
mb_convert_encoding — Convert character encoding
mb_convert_kana — Convert "kana" one from another ("zen-kaku", "han-kaku" and more)
mb_convert_variables — Convert character code in variable(s)
mb_decode_mimeheader — Decode string in MIME header field
mb_decode_numericentity — Decode HTML numeric string reference to character
mb_detect_encoding — Detect character encoding
mb_detect_order — Set/Get character encoding detection order
mb_encode_mimeheader — Encode string for MIME header
mb_encode_numericentity — Encode character to HTML numeric string reference
mb_ereg_match — Regular expression match for multibyte string
mb_ereg_replace — Replace regular expression with multibyte support
mb_ereg_search_getpos — Returns start point for next regular expression match
mb_ereg_search_getregs — Retrieve the result from the last multibyte regular expression match
mb_ereg_search_init — Setup string and regular expression for multibyte regularexpression match
mb_ereg_search_pos — Return position and length of matched part of multibyte regular expression for predefined multibyte string
mb_ereg_search_regs — Returns the matched part of multibyte regular expression
mb_ereg_search_setpos — Set start point of next regular expression match
mb_ereg_search — Multibyte regular expression match for predefined multibyte string
mb_ereg — Regular expression match with multibyte support
mb_eregi_replace — Replace regular expression with multibyte support ignoring case
mb_eregi — Regular expression match ignoring case with multibyte support
mb_get_info — Get internal settings of mbstring
mb_http_input — Detect HTTP input character encoding
mb_http_output — Set/Get HTTP output character encoding
mb_internal_encoding — Set/Get internal character encoding
mb_language — Set/Get current language
mb_output_handler — Callback function converts character encoding in output buffer
mb_parse_str — Parse GET/POST/COOKIE data and set global variable
mb_preferred_mime_name — Get MIME charset string
mb_regex_encoding — Returns current encoding for multibyte regex as string
mb_regex_set_options — Set/Get the default options for mbregex functions
mb_send_mail — Send encoded mail
mb_split — Split multibyte string using regular expression
mb_strcut — Get part of string
mb_strimwidth — Get truncated string with specified width
mb_stripos — Finds position of first occurrence of a string within another, case insensitive
mb_stristr — Finds first occurrence of a string within another, case insensitive
mb_strlen — Get string length
mb_strpos — Find position of first occurrence of string in a string
mb_strrchr — Finds the last occurrence of a character in a string within another
mb_strrichr — Finds the last occurrence of a character in a string within another, case insensitive
mb_strripos — Finds position of last occurrence of a string within another, case insensitive
mb_strrpos — Find position of last occurrence of a string in a string
mb_strstr — Finds first occurrence of a string within another
mb_strtolower — Make a string lowercase
mb_strtoupper — Make a string uppercase
mb_strwidth — Return width of string
mb_substitute_character — Set/Get substitution character
mb_substr_count — Count the number of substring occurrences
mb_substr — Get part of string
XCVII. muscat
muscat_close — Shuts down the muscat session
muscat_get — Gets a line back from the core muscat API
muscat_give — Sends string to the core muscat API
muscat_setup_net — Creates a new muscat session
muscat_setup — Creates a new local muscat session
XCVIII. MySQL
mysql_affected_rows — Get number of affected rows in previous MySQL operation
mysql_change_user — Change logged in user of the active connection
mysql_client_encoding — Returns the name of the character set
mysql_close — Close MySQL connection
mysql_connect — Open a connection to a MySQL Server
mysql_create_db — Create a MySQL database
mysql_data_seek — Move internal result pointer
mysql_db_name — Get result data
mysql_db_query — Send a MySQL query
mysql_drop_db — Drop (delete) a MySQL database
mysql_errno — Returns the numerical value of the error message from previous MySQL operation
mysql_error — Returns the text of the error message from previous MySQL operation
mysql_escape_string — Escapes a string for use in a mysql_query
mysql_fetch_array — Fetch a result row as an associative array, a numeric array, or both
mysql_fetch_assoc — Fetch a result row as an associative array
mysql_fetch_field — Get column information from a result and return as an object
mysql_fetch_lengths — Get the length of each output in a result
mysql_fetch_object — Fetch a result row as an object
mysql_fetch_row — Get a result row as an enumerated array
mysql_field_flags — Get the flags associated with the specified field in a result
mysql_field_len — Returns the length of the specified field
mysql_field_name — Get the name of the specified field in a result
mysql_field_seek — Set result pointer to a specified field offset
mysql_field_table — Get name of the table the specified field is in
mysql_field_type — Get the type of the specified field in a result
mysql_free_result — Free result memory
mysql_get_client_info — Get MySQL client info
mysql_get_host_info — Get MySQL host info
mysql_get_proto_info — Get MySQL protocol info
mysql_get_server_info — Get MySQL server info
mysql_info — Get information about the most recent query
mysql_insert_id — Get the ID generated from the previous INSERT operation
mysql_list_dbs — List databases available on a MySQL server
mysql_list_fields — List MySQL table fields
mysql_list_processes — List MySQL processes
mysql_list_tables — List tables in a MySQL database
mysql_num_fields — Get number of fields in result
mysql_num_rows — Get number of rows in result
mysql_pconnect — Open a persistent connection to a MySQL server
mysql_ping — Ping a server connection or reconnect if there is no connection
mysql_query — Send a MySQL query
mysql_real_escape_string — Escapes special characters in a string for use in a SQL statement
mysql_result — Get result data
mysql_select_db — Select a MySQL database
mysql_set_charset — Sets the client character set
mysql_stat — Get current system status
mysql_tablename — Get table name of field
mysql_thread_id — Return the current thread ID
mysql_unbuffered_query — Send an SQL query to MySQL, without fetching and buffering the result rows
XCIX. MySQL (PDO)
PDO_MYSQL DSN — Connecting to MySQL databases
C. mysqli
mysqli_affected_rows — Gets the number of affected rows in a previous MySQL operation
mysqli_autocommit — Turns on or off auto-commiting database modifications
mysqli_bind_param — Alias for mysqli_stmt_bind_param()
mysqli_bind_result — Alias for mysqli_stmt_bind_result()
mysqli_change_user — Changes the user of the specified database connection
mysqli_character_set_name — Returns the default character set for the database connection
mysqli_client_encoding — Alias of mysqli_character_set_name()
mysqli_close — Closes a previously opened database connection
mysqli_commit — Commits the current transaction
mysqli_connect_errno — Returns the error code from last connect call
mysqli_connect_error — Returns a string description of the last connect error
mysqli_connect — Open a new connection to the MySQL server
mysqli_data_seek — Adjusts the result pointer to an arbitary row in the result
mysqli_debug — Performs debugging operations
mysqli_disable_reads_from_master — Disable reads from master
mysqli_disable_rpl_parse — Disable RPL parse
mysqli_dump_debug_info — Dump debugging information into the log
mysqli_embedded_server_end
mysqli_embedded_server_start
mysqli_enable_reads_from_master — Enable reads from master
mysqli_enable_rpl_parse — Enable RPL parse
mysqli_errno — Returns the error code for the most recent function call
mysqli_error — Returns a string description of the last error
mysqli_escape_string — Alias of mysqli_real_escape_string()
mysqli_execute — Alias for mysqli_stmt_execute()
mysqli_fetch_array — Fetch a result row as an associative, a numeric array, or both
mysqli_fetch_assoc — Fetch a result row as an associative array
mysqli_fetch_field_direct — Fetch meta-data for a single field
mysqli_fetch_field — Returns the next field in the result set
mysqli_fetch_fields — Returns an array of objects representing the fields in a result set
mysqli_fetch_lengths — Returns the lengths of the columns of the current row in the result set
mysqli_fetch_object — Returns the current row of a result set as an object
mysqli_fetch_row — Get a result row as an enumerated array
mysqli_fetch — Alias for mysqli_stmt_fetch()
mysqli_field_count — Returns the number of columns for the most recent query
mysqli_field_seek — Set result pointer to a specified field offset
mysqli_field_tell — Get current field offset of a result pointer
mysqli_free_result — Frees the memory associated with a result
mysqli_get_charset — Returns a character set object
mysqli_get_client_info — Returns the MySQL client version as a string
mysqli_get_client_version — Get MySQL client info
mysqli_get_host_info — Returns a string representing the type of connection used
mysqli_get_metadata — Alias for mysqli_stmt_result_metadata()
mysqli_get_proto_info — Returns the version of the MySQL protocol used
mysqli_get_server_info — Returns the version of the MySQL server
mysqli_get_server_version — Returns the version of the MySQL server as an integer
mysqli_get_warnings
mysqli_info — Retrieves information about the most recently executed query
mysqli_init — Initializes MySQLi and returns a resource for use with mysqli_real_connect()
mysqli_insert_id — Returns the auto generated id used in the last query
mysqli_kill — Asks the server to kill a MySQL thread
mysqli_master_query — Enforce execution of a query on the master in a master/slave setup
mysqli_more_results — Check if there are any more query results from a multi query
mysqli_multi_query — Performs a query on the database
mysqli_next_result — Prepare next result from multi_query
mysqli_num_fields — Get the number of fields in a result
mysqli_num_rows — Gets the number of rows in a result
mysqli_options — Set options
mysqli_param_count — Alias for mysqli_stmt_param_count()
mysqli_ping — Pings a server connection, or tries to reconnect if the connection has gone down
mysqli_prepare — Prepare a SQL statement for execution
mysqli_query — Performs a query on the database
mysqli_real_connect — Opens a connection to a mysql server
mysqli_real_escape_string — Escapes special characters in a string for use in a SQL statement, taking into account the current charset of the connection
mysqli_real_query — Execute an SQL query
mysqli_report — Enables or disables internal report functions
mysqli_rollback — Rolls back current transaction
mysqli_rpl_parse_enabled — Check if RPL parse is enabled
mysqli_rpl_probe — RPL probe
mysqli_rpl_query_type — Returns RPL query type
mysqli_select_db — Selects the default database for database queries
mysqli_send_long_data — Alias for mysqli_stmt_send_long_data()
mysqli_send_query — Send the query and return
mysqli_server_end — Shut down the embedded server
mysqli_server_init — Initialize embedded server
mysqli_set_charset — Sets the default client character set
mysqli_set_local_infile_default — Unsets user defined handler for load local infile command
mysqli_set_local_infile_handler — Set callback functions for LOAD DATA LOCAL INFILE command
mysqli_set_opt — Alias of mysqli_options()
mysqli_slave_query — Force execution of a query on a slave in a master/slave setup
mysqli_sqlstate — Returns the SQLSTATE error from previous MySQL operation
mysqli_ssl_set — Used for establishing secure connections using SSL
mysqli_stat — Gets the current system status
mysqli_stmt_affected_rows — Returns the total number of rows changed, deleted, or inserted by the last executed statement
mysqli_stmt_attr_get
mysqli_stmt_attr_set
mysqli_stmt_bind_param — Binds variables to a prepared statement as parameters
mysqli_stmt_bind_result — Binds variables to a prepared statement for result storage
mysqli_stmt_close — Closes a prepared statement
mysqli_stmt_data_seek — Seeks to an arbitray row in statement result set
mysqli_stmt_errno — Returns the error code for the most recent statement call
mysqli_stmt_error — Returns a string description for last statement error
mysqli_stmt_execute — Executes a prepared Query
mysqli_stmt_fetch — Fetch results from a prepared statement into the bound variables
mysqli_stmt_field_count — Returns the number of field in the given statement
mysqli_stmt_free_result — Frees stored result memory for the given statement handle
mysqli_stmt_get_warnings
mysqli_stmt_init — Initializes a statement and returns an object for use with mysqli_stmt_prepare
mysqli_stmt_insert_id — Get the ID generated from the previous INSERT operation
mysqli_stmt_num_rows — Return the number of rows in statements result set
mysqli_stmt_param_count — Returns the number of parameter for the given statement
mysqli_stmt_prepare — Prepare a SQL statement for execution
mysqli_stmt_reset — Resets a prepared statement
mysqli_stmt_result_metadata — Returns result set metadata from a prepared statement
mysqli_stmt_send_long_data — Send data in blocks
mysqli_stmt_sqlstate — Returns SQLSTATE error from previous statement operation
mysqli_stmt_store_result — Transfers a result set from a prepared statement
mysqli_store_result — Transfers a result set from the last query
mysqli_thread_id — Returns the thread ID for the current connection
mysqli_thread_safe — Returns whether thread safety is given or not
mysqli_use_result — Initiate a result set retrieval
mysqli_warning_count — Returns the number of warnings from the last query for the given link
CI. Ncurses
ncurses_addch — Add character at current position and advance cursor
ncurses_addchnstr — Add attributed string with specified length at current position
ncurses_addchstr — Add attributed string at current position
ncurses_addnstr — Add string with specified length at current position
ncurses_addstr — Output text at current position
ncurses_assume_default_colors — Define default colors for color 0
ncurses_attroff — Turn off the given attributes
ncurses_attron — Turn on the given attributes
ncurses_attrset — Set given attributes
ncurses_baudrate — Returns baudrate of terminal
ncurses_beep — Let the terminal beep
ncurses_bkgd — Set background property for terminal screen
ncurses_bkgdset — Control screen background
ncurses_border — Draw a border around the screen using attributed characters
ncurses_bottom_panel — Moves a visible panel to the bottom of the stack
ncurses_can_change_color — Check if we can change terminals colors
ncurses_cbreak — Switch of input buffering
ncurses_clear — Clear screen
ncurses_clrtobot — Clear screen from current position to bottom
ncurses_clrtoeol — Clear screen from current position to end of line
ncurses_color_content — Gets the RGB value for color
ncurses_color_set — Set fore- and background color
ncurses_curs_set — Set cursor state
ncurses_def_prog_mode — Saves terminals (program) mode
ncurses_def_shell_mode — Saves terminals (shell) mode
ncurses_define_key — Define a keycode
ncurses_del_panel — Remove panel from the stack and delete it (but not the associated window)
ncurses_delay_output — Delay output on terminal using padding characters
ncurses_delch — Delete character at current position, move rest of line left
ncurses_deleteln — Delete line at current position, move rest of screen up
ncurses_delwin — Delete a ncurses window
ncurses_doupdate — Write all prepared refreshes to terminal
ncurses_echo — Activate keyboard input echo
ncurses_echochar — Single character output including refresh
ncurses_end — Stop using ncurses, clean up the screen
ncurses_erase — Erase terminal screen
ncurses_erasechar — Returns current erase character
ncurses_filter — Set LINES for iniscr() and newterm() to 1
ncurses_flash — Flash terminal screen (visual bell)
ncurses_flushinp — Flush keyboard input buffer
ncurses_getch — Read a character from keyboard
ncurses_getmaxyx — Returns the size of a window
ncurses_getmouse — Reads mouse event
ncurses_getyx — Returns the current cursor position for a window
ncurses_halfdelay — Put terminal into halfdelay mode
ncurses_has_colors — Check if terminal has colors
ncurses_has_ic — Check for insert- and delete-capabilities
ncurses_has_il — Check for line insert- and delete-capabilities
ncurses_has_key — Check for presence of a function key on terminal keyboard
ncurses_hide_panel — Remove panel from the stack, making it invisible
ncurses_hline — Draw a horizontal line at current position using an attributed character and max. n characters long
ncurses_inch — Get character and attribute at current position
ncurses_init_color — Set new RGB value for color
ncurses_init_pair — Allocate a color pair
ncurses_init — Initialize ncurses
ncurses_insch — Insert character moving rest of line including character at current position
ncurses_insdelln — Insert lines before current line scrolling down (negative numbers delete and scroll up)
ncurses_insertln — Insert a line, move rest of screen down
ncurses_insstr — Insert string at current position, moving rest of line right
ncurses_instr — Reads string from terminal screen
ncurses_isendwin — Ncurses is in endwin mode, normal screen output may be performed
ncurses_keyok — Enable or disable a keycode
ncurses_keypad — Turns keypad on or off
ncurses_killchar — Returns current line kill character
ncurses_longname — Returns terminals description
ncurses_meta — Enables/Disable 8-bit meta key information
ncurses_mouse_trafo — Transforms coordinates
ncurses_mouseinterval — Set timeout for mouse button clicks
ncurses_mousemask — Sets mouse options
ncurses_move_panel — Moves a panel so that its upper-left corner is at [startx, starty]
ncurses_move — Move output position
ncurses_mvaddch — Move current position and add character
ncurses_mvaddchnstr — Move position and add attributed string with specified length
ncurses_mvaddchstr — Move position and add attributed string
ncurses_mvaddnstr — Move position and add string with specified length
ncurses_mvaddstr — Move position and add string
ncurses_mvcur — Move cursor immediately
ncurses_mvdelch — Move position and delete character, shift rest of line left
ncurses_mvgetch — Move position and get character at new position
ncurses_mvhline — Set new position and draw a horizontal line using an attributed character and max. n characters long
ncurses_mvinch — Move position and get attributed character at new position
ncurses_mvvline — Set new position and draw a vertical line using an attributed character and max. n characters long
ncurses_mvwaddstr — Add string at new position in window
ncurses_napms — Sleep
ncurses_new_panel — Create a new panel and associate it with window
ncurses_newpad — Creates a new pad (window)
ncurses_newwin — Create a new window
ncurses_nl — Translate newline and carriage return / line feed
ncurses_nocbreak — Switch terminal to cooked mode
ncurses_noecho — Switch off keyboard input echo
ncurses_nonl — Do not translate newline and carriage return / line feed
ncurses_noqiflush — Do not flush on signal characters
ncurses_noraw — Switch terminal out of raw mode
ncurses_pair_content — Gets the RGB value for color
ncurses_panel_above — Returns the panel above panel
ncurses_panel_below — Returns the panel below panel
ncurses_panel_window — Returns the window associated with panel
ncurses_pnoutrefresh — Copies a region from a pad into the virtual screen
ncurses_prefresh — Copies a region from a pad into the virtual screen
ncurses_putp — Apply padding information to the string and output it
ncurses_qiflush — Flush on signal characters
ncurses_raw — Switch terminal into raw mode
ncurses_refresh — Refresh screen
ncurses_replace_panel — Replaces the window associated with panel
ncurses_reset_prog_mode — Resets the prog mode saved by def_prog_mode
ncurses_reset_shell_mode — Resets the shell mode saved by def_shell_mode
ncurses_resetty — Restores saved terminal state
ncurses_savetty — Saves terminal state
ncurses_scr_dump — Dump screen content to file
ncurses_scr_init — Initialize screen from file dump
ncurses_scr_restore — Restore screen from file dump
ncurses_scr_set — Inherit screen from file dump
ncurses_scrl — Scroll window content up or down without changing current position
ncurses_show_panel — Places an invisible panel on top of the stack, making it visible
ncurses_slk_attr — Returns current soft label key attribute
ncurses_slk_attroff — Turn off the given attributes for soft function-key labels
ncurses_slk_attron — Turn on the given attributes for soft function-key labels
ncurses_slk_attrset — Set given attributes for soft function-key labels
ncurses_slk_clear — Clears soft labels from screen
ncurses_slk_color — Sets color for soft label keys
ncurses_slk_init — Initializes soft label key functions
ncurses_slk_noutrefresh — Copies soft label keys to virtual screen
ncurses_slk_refresh — Copies soft label keys to screen
ncurses_slk_restore — Restores soft label keys
ncurses_slk_set — Sets function key labels
ncurses_slk_touch — Forces output when ncurses_slk_noutrefresh is performed
ncurses_standend — Stop using 'standout' attribute
ncurses_standout — Start using 'standout' attribute
ncurses_start_color — Start using colors
ncurses_termattrs — Returns a logical OR of all attribute flags supported by terminal
ncurses_termname — Returns terminals (short)-name
ncurses_timeout — Set timeout for special key sequences
ncurses_top_panel — Moves a visible panel to the top of the stack
ncurses_typeahead — Specify different filedescriptor for typeahead checking
ncurses_ungetch — Put a character back into the input stream
ncurses_ungetmouse — Pushes mouse event to queue
ncurses_update_panels — Refreshes the virtual screen to reflect the relations between panels in the stack
ncurses_use_default_colors — Assign terminal default colors to color id -1
ncurses_use_env — Control use of environment information about terminal size
ncurses_use_extended_names — Control use of extended names in terminfo descriptions
ncurses_vidattr — Display the string on the terminal in the video attribute mode
ncurses_vline — Draw a vertical line at current position using an attributed character and max. n characters long
ncurses_waddch — Adds character at current position in a window and advance cursor
ncurses_waddstr — Outputs text at current postion in window
ncurses_wattroff — Turns off attributes for a window
ncurses_wattron — Turns on attributes for a window
ncurses_wattrset — Set the attributes for a window
ncurses_wborder — Draws a border around the window using attributed characters
ncurses_wclear — Clears window
ncurses_wcolor_set — Sets windows color pairings
ncurses_werase — Erase window contents
ncurses_wgetch — Reads a character from keyboard (window)
ncurses_whline — Draws a horizontal line in a window at current position using an attributed character and max. n characters long
ncurses_wmouse_trafo — Transforms window/stdscr coordinates
ncurses_wmove — Moves windows output position
ncurses_wnoutrefresh — Copies window to virtual screen
ncurses_wrefresh — Refresh window on terminal screen
ncurses_wstandend — End standout mode for a window
ncurses_wstandout — Enter standout mode for a window
ncurses_wvline — Draws a vertical line in a window at current position using an attributed character and max. n characters long
CII. Network
checkdnsrr — Check DNS records corresponding to a given Internet host name or IP address
closelog — Close connection to system logger
debugger_off — Disable internal PHP debugger (PHP 3)
debugger_on — Enable internal PHP debugger (PHP 3)
define_syslog_variables — Initializes all syslog related constants
dns_check_record — Alias of checkdnsrr()
dns_get_mx — Alias of getmxrr()
dns_get_record — Fetch DNS Resource Records associated with a hostname
fsockopen — Open Internet or Unix domain socket connection
gethostbyaddr — Get the Internet host name corresponding to a given IP address
gethostbyname — Get the IP address corresponding to a given Internet host name
gethostbynamel — Get a list of IP addresses corresponding to a given Internet host name
getmxrr — Get MX records corresponding to a given Internet host name
getprotobyname — Get protocol number associated with protocol name
getprotobynumber — Get protocol name associated with protocol number
getservbyname — Get port number associated with an Internet service and protocol
getservbyport — Get Internet service which corresponds to port and protocol
header — Send a raw HTTP header
headers_list — Returns a list of response headers sent (or ready to send)
headers_sent — Checks if or where headers have been sent
inet_ntop — Converts a packed internet address to a human readable representation
inet_pton — Converts a human readable IP address to its packed in_addr representation
ip2long — Converts a string containing an (IPv4) Internet Protocol dotted address into a proper address
long2ip — Converts an (IPv4) Internet network address into a string in Internet standard dotted format
openlog — Open connection to system logger
pfsockopen — Open persistent Internet or Unix domain socket connection
setcookie — Send a cookie
setrawcookie — Send a cookie without urlencoding the cookie value
socket_get_status — Alias of stream_get_meta_data()
socket_set_blocking — Alias of stream_set_blocking()
socket_set_timeout — Alias of stream_set_timeout()
syslog — Generate a system log message
CIII. Newt
newt_bell — Send a beep to the terminal
newt_button_bar — This function returns a grid containing the buttons created.
newt_button — Create a new button
newt_centered_window — Open a centered window of the specified size
newt_checkbox_get_value — Retreives value of checkox resource
newt_checkbox_set_flags — Configures checkbox resource
newt_checkbox_set_value — Sets the value of the checkbox
newt_checkbox_tree_add_item — Adds new item to the checkbox tree
newt_checkbox_tree_find_item — Finds an item in the checkbox tree
newt_checkbox_tree_get_current — Returns checkbox tree selected item
newt_checkbox_tree_get_entry_value
newt_checkbox_tree_get_multi_selection
newt_checkbox_tree_get_selection
newt_checkbox_tree_multi
newt_checkbox_tree_set_current
newt_checkbox_tree_set_entry_value
newt_checkbox_tree_set_entry
newt_checkbox_tree_set_width
newt_checkbox_tree
newt_checkbox
newt_clear_key_buffer — Discards the contents of the terminal's input buffer without waiting for additional input
newt_cls
newt_compact_button
newt_component_add_callback
newt_component_takes_focus
newt_create_grid
newt_cursor_off
newt_cursor_on
newt_delay
newt_draw_form
newt_draw_root_text — Displays the string text at the position indicated
newt_entry_get_value
newt_entry_set_filter
newt_entry_set_flags
newt_entry_set
newt_entry
newt_finished — Uninitializes newt interface
newt_form_add_component — Adds a single component to the form
newt_form_add_components — Add several components to the form
newt_form_add_hot_key
newt_form_destroy — Destroys a form
newt_form_get_current
newt_form_run — Runs a form
newt_form_set_background
newt_form_set_height
newt_form_set_size
newt_form_set_timer
newt_form_set_width
newt_form_watch_fd
newt_form — Create a form
newt_get_screen_size — Fills in the passed references with the current size of the terminal
newt_grid_add_components_to_form
newt_grid_basic_window
newt_grid_free
newt_grid_get_size
newt_grid_h_close_stacked
newt_grid_h_stacked
newt_grid_place
newt_grid_set_field
newt_grid_simple_window
newt_grid_v_close_stacked
newt_grid_v_stacked
newt_grid_wrapped_window_at
newt_grid_wrapped_window
newt_init — Initialize newt
newt_label_set_text
newt_label
newt_listbox_append_entry
newt_listbox_clear_selection
newt_listbox_clear
newt_listbox_delete_entry
newt_listbox_get_current
newt_listbox_get_selection
newt_listbox_insert_entry
newt_listbox_item_count
newt_listbox_select_item
newt_listbox_set_current_by_key
newt_listbox_set_current
newt_listbox_set_data
newt_listbox_set_entry
newt_listbox_set_width
newt_listbox
newt_listitem_get_data
newt_listitem_set
newt_listitem
newt_open_window — Open a window of the specified size and position
newt_pop_help_line — Replaces the current help line with the one from the stack
newt_pop_window — Removes the top window from the display
newt_push_help_line — Saves the current help line on a stack, and displays the new line
newt_radio_get_current
newt_radiobutton
newt_redraw_help_line
newt_reflow_text
newt_refresh — Updates modified portions of the screen
newt_resize_screen
newt_resume — Resume using the newt interface after calling newt_suspend()
newt_run_form — Runs a form
newt_scale_set
newt_scale
newt_scrollbar_set
newt_set_help_callback
newt_set_suspend_callback — Set a callback function which gets invoked when user presses the suspend key
newt_suspend — Tells newt to return the terminal to its initial state
newt_textbox_get_num_lines
newt_textbox_reflowed
newt_textbox_set_height
newt_textbox_set_text
newt_textbox
newt_vertical_scrollbar
newt_wait_for_key — Doesn't return until a key has been pressed
newt_win_choice
newt_win_entries
newt_win_menu
newt_win_message
newt_win_messagev
newt_win_ternary
CIV. NSAPI
nsapi_request_headers — Fetch all HTTP request headers
nsapi_response_headers — Fetch all HTTP response headers
nsapi_virtual — Perform an NSAPI sub-request
CV. Object Aggregation
aggregate_info — Gets aggregation information for a given object
aggregate_methods_by_list — Selective dynamic class methods aggregation to an object
aggregate_methods_by_regexp — Selective class methods aggregation to an object using a regular expression
aggregate_methods — Dynamic class and object aggregation of methods
aggregate_properties_by_list — Selective dynamic class properties aggregation to an object
aggregate_properties_by_regexp — Selective class properties aggregation to an object using a regular expression
aggregate_properties — Dynamic aggregation of class properties to an object
aggregate — Dynamic class and object aggregation of methods and properties
aggregation_info — Alias of aggregate_info()
deaggregate — Removes the aggregated methods and properties from an object
CVI. Object overloading
overload — Enable property and method call overloading for a class
CVII. OCI8
oci_bind_array_by_name — Binds PHP array to Oracle PL/SQL array by name
oci_bind_by_name — Binds the PHP variable to the Oracle placeholder
oci_cancel — Cancels reading from cursor
oci_close — Closes Oracle connection
OCI-Collection->append — Appends element to the collection
OCI-Collection->assign — Assigns a value to the collection from another existing collection
OCI-Collection->assignElem — Assigns a value to the element of the collection
OCI-Collection->free — Frees the resources associated with the collection object
OCI-Collection->getElem — Returns value of the element
OCI-Collection->max — Returns the maximum number of elements in the collection
OCI-Collection->size — Returns size of the collection
OCI-Collection->trim — Trims elements from the end of the collection
oci_commit — Commits outstanding statements
oci_connect — Establishes a connection to the Oracle server
oci_define_by_name — Uses a PHP variable for the define-step during a SELECT
oci_error — Returns the last error found
oci_execute — Executes a statement
oci_fetch_all — Fetches all rows of result data into an array
oci_fetch_array — Returns the next row from the result data as an associative or numeric array, or both
oci_fetch_assoc — Returns the next row from the result data as an associative array
oci_fetch_object — Returns the next row from the result data as an object
oci_fetch_row — Returns the next row from the result data as a numeric array
oci_fetch — Fetches the next row into result-buffer
oci_field_is_null — Checks if the field is NULL
oci_field_name — Returns the name of a field from the statement
oci_field_precision — Tell the precision of a field
oci_field_scale — Tell the scale of the field
oci_field_size — Returns field's size
oci_field_type_raw — Tell the raw Oracle data type of the field
oci_field_type — Returns field's data type
oci_free_statement — Frees all resources associated with statement or cursor
oci_internal_debug — Enables or disables internal debug output
OCI-Lob->append — Appends data from the large object to another large object
OCI-Lob->close — Closes LOB descriptor
oci_lob_copy — Copies large object
OCI-Lob->eof — Tests for end-of-file on a large object's descriptor
OCI-Lob->erase — Erases a specified portion of the internal LOB data
OCI-Lob->export — Exports LOB's contents to a file
OCI-Lob->flush — Flushes/writes buffer of the LOB to the server
OCI-Lob->free — Frees resources associated with the LOB descriptor
OCI-Lob->getBuffering — Returns current state of buffering for the large object
OCI-Lob->import — Imports file data to the LOB
oci_lob_is_equal — Compares two LOB/FILE locators for equality
OCI-Lob->load — Returns large object's contents
OCI-Lob->read — Reads part of the large object
OCI-Lob->rewind — Moves the internal pointer to the beginning of the large object
OCI-Lob->save — Saves data to the large object
OCI-Lob->saveFile — Alias of oci_lob_import()
OCI-Lob->seek — Sets the internal pointer of the large object
OCI-Lob->setBuffering — Changes current state of buffering for the large object
OCI-Lob->size — Returns size of large object
OCI-Lob->tell — Returns current position of internal pointer of large object
OCI-Lob->truncate — Truncates large object
OCI-Lob->write — Writes data to the large object
OCI-Lob->writeTemporary — Writes temporary large object
OCI-Lob->writeToFile — Alias of oci_lob_export()
oci_new_collection — Allocates new collection object
oci_new_connect — Establishes a new connection to the Oracle server
oci_new_cursor — Allocates and returns a new cursor (statement handle)
oci_new_descriptor — Initializes a new empty LOB or FILE descriptor
oci_num_fields — Returns the number of result columns in a statement
oci_num_rows — Returns number of rows affected during statement execution
oci_parse — Prepares Oracle statement for execution
oci_password_change — Changes password of Oracle's user
oci_pconnect — Connect to an Oracle database using a persistent connection
oci_result — Returns field's value from the fetched row
oci_rollback — Rolls back outstanding transaction
oci_server_version — Returns server version
oci_set_prefetch — Sets number of rows to be prefetched
oci_statement_type — Returns the type of an OCI statement
ocibindbyname — Alias of oci_bind_by_name()
ocicancel — Alias of oci_cancel()
ocicloselob — Alias of OCI-Lob->close
ocicollappend — Alias of OCI-Collection->append
ocicollassign — Alias of OCI-Collection->assign
ocicollassignelem — Alias of OCI-Collection->assignElem
ocicollgetelem — Alias of OCI-Collection->getElem
ocicollmax — Alias of OCI-Collection->max
ocicollsize — Alias of OCI-Collection->size
ocicolltrim — Alias of OCI-Collection->trim
ocicolumnisnull — Alias of oci_field_is_null()
ocicolumnname — Alias of oci_field_name()
ocicolumnprecision — Alias of oci_field_precision()
ocicolumnscale — Alias of oci_field_scale()
ocicolumnsize — Alias of oci_field_size()
ocicolumntype — Alias of oci_field_type()
ocicolumntyperaw — Alias of oci_field_type_raw()
ocicommit — Alias of oci_commit()
ocidefinebyname — Alias of oci_define_by_name()
ocierror — Alias of oci_error()
ociexecute — Alias of oci_execute()
ocifetch — Alias of oci_fetch()
ocifetchinto — Fetches the next row into an array (deprecated)
ocifetchstatement — Alias of oci_fetch_all()
ocifreecollection — Alias of OCI-Collection->free
ocifreecursor — Alias of oci_free_statement()
ocifreedesc — Alias of OCI-Lob->free
ocifreestatement — Alias of oci_free_statement()
ociinternaldebug — Alias of oci_internal_debug()
ociloadlob — Alias of OCI-Lob->load
ocilogoff — Alias of oci_close()
ocilogon — Alias of oci_connect()
ocinewcollection — Alias of oci_new_collection()
ocinewcursor — Alias of oci_new_cursor()
ocinewdescriptor — Alias of oci_new_descriptor()
ocinlogon — Alias of oci_new_connect()
ocinumcols — Alias of oci_num_fields()
ociparse — Alias of oci_parse()
ociplogon — Alias of oci_pconnect()
ociresult — Alias of oci_result()
ocirollback — Alias of oci_rollback()
ocirowcount — Alias of oci_num_rows()
ocisavelob — Alias of OCI-Lob->save
ocisavelobfile — Alias of OCI-Lob->import
ociserverversion — Alias of oci_server_version()
ocisetprefetch — Alias of oci_set_prefetch()
ocistatementtype — Alias of oci_statement_type()
ociwritelobtofile — Alias of OCI-Lob->export
ociwritetemporarylob — Alias of OCI-Lob->writeTemporary
CVIII. ODBC
odbc_autocommit — Toggle autocommit behaviour
odbc_binmode — Handling of binary column data
odbc_close_all — Close all ODBC connections
odbc_close — Close an ODBC connection
odbc_columnprivileges — Returns a result identifier that can be used to fetch a list of columns and associated privileges
odbc_columns — Lists the column names in specified tables
odbc_commit — Commit an ODBC transaction
odbc_connect — Connect to a datasource
odbc_cursor — Get cursorname
odbc_data_source — Returns information about a current connection
odbc_do — Synonym for odbc_exec()
odbc_error — Get the last error code
odbc_errormsg — Get the last error message
odbc_exec — Prepare and execute a SQL statement
odbc_execute — Execute a prepared statement
odbc_fetch_array — Fetch a result row as an associative array
odbc_fetch_into — Fetch one result row into array
odbc_fetch_object — Fetch a result row as an object
odbc_fetch_row — Fetch a row
odbc_field_len — Get the length (precision) of a field
odbc_field_name — Get the columnname
odbc_field_num — Return column number
odbc_field_precision — Synonym for odbc_field_len()
odbc_field_scale — Get the scale of a field
odbc_field_type — Datatype of a field
odbc_foreignkeys — Returns a list of foreign keys in the specified table or a list of foreign keys in other tables that refer to the primary key in the specified table
odbc_free_result — Free resources associated with a result
odbc_gettypeinfo — Returns a result identifier containing information about data types supported by the data source
odbc_longreadlen — Handling of LONG columns
odbc_next_result — Checks if multiple results are available
odbc_num_fields — Number of columns in a result
odbc_num_rows — Number of rows in a result
odbc_pconnect — Open a persistent database connection
odbc_prepare — Prepares a statement for execution
odbc_primarykeys — Returns a result identifier that can be used to fetch the column names that comprise the primary key for a table
odbc_procedurecolumns — Retrieve information about parameters to procedures
odbc_procedures — Get the list of procedures stored in a specific data source
odbc_result_all — Print result as HTML table
odbc_result — Get result data
odbc_rollback — Rollback a transaction
odbc_setoption — Adjust ODBC settings
odbc_specialcolumns — Returns either the optimal set of columns that uniquely identifies a row in the table or columns that are automatically updated when any value in the row is updated by a transaction
odbc_statistics — Retrieve statistics about a table
odbc_tableprivileges — Lists tables and the privileges associated with each table
odbc_tables — Get the list of table names stored in a specific data source
CIX. ODBC and DB2 (PDO)
PDO_ODBC DSN — Connecting to ODBC or DB2 databases
CX. OGG/Vorbis
Usage — Examples on using the ogg:// wrapper.
CXI. openal
openal_buffer_create — Generate OpenAL buffer
openal_buffer_data — Load a buffer with data
openal_buffer_destroy — Destroys an OpenAL buffer
openal_buffer_get — Retrieve an OpenAL buffer property
openal_buffer_loadwav — Load a .wav file into a buffer
openal_context_create — Create an audio processing context
openal_context_current — Make the specified context current
openal_context_destroy — Destroys a context
openal_context_process — Process the specified context
openal_context_suspend — Suspend the specified context
openal_device_close — Close an OpenAL device
openal_device_open — Initialize the OpenAL audio layer
openal_listener_get — Retrieve a listener property
openal_listener_set — Set a listener property
openal_source_create — Generate a source resource
openal_source_destroy — Destroy a source resource
openal_source_get — Retrieve an OpenAL source property
openal_source_pause — Pause the source
openal_source_play — Start playing the source
openal_source_rewind — Rewind the source
openal_source_set — Set source property
openal_source_stop — Stop playing the source
openal_stream — Begin streaming on a source
CXII. OpenSSL
openssl_csr_export_to_file — Exports a CSR to a file
openssl_csr_export — Exports a CSR as a string
openssl_csr_get_public_key — Returns the public key of a CERT
openssl_csr_get_subject — Returns the subject of a CERT
openssl_csr_new — Generates a CSR
openssl_csr_sign — Sign a CSR with another certificate (or itself) and generate a certificate
openssl_error_string — Return openSSL error message
openssl_free_key — Free key resource
openssl_get_privatekey — Alias of openssl_pkey_get_private()
openssl_get_publickey — Alias of openssl_pkey_get_public()
openssl_open — Open sealed data
openssl_pkcs12_export_to_file — Exports a PKCS#12 Compatible Certificate Store File
openssl_pkcs12_export — Exports a PKCS#12 Compatible Certificate Store File to variable.
openssl_pkcs12_read — Parse a PKCS#12 Certificate Store into an array
openssl_pkcs7_decrypt — Decrypts an S/MIME encrypted message
openssl_pkcs7_encrypt — Encrypt an S/MIME message
openssl_pkcs7_sign — Sign an S/MIME message
openssl_pkcs7_verify — Verifies the signature of an S/MIME signed message
openssl_pkey_export_to_file — Gets an exportable representation of a key into a file
openssl_pkey_export — Gets an exportable representation of a key into a string
openssl_pkey_free — Frees a private key
openssl_pkey_get_details — Returns an array with the key details
openssl_pkey_get_private — Get a private key
openssl_pkey_get_public — Extract public key from certificate and prepare it for use
openssl_pkey_new — Generates a new private key
openssl_private_decrypt — Decrypts data with private key
openssl_private_encrypt — Encrypts data with private key
openssl_public_decrypt — Decrypts data with public key
openssl_public_encrypt — Encrypts data with public key
openssl_seal — Seal (encrypt) data
openssl_sign — Generate signature
openssl_verify — Verify signature
openssl_x509_check_private_key — Checks if a private key corresponds to a certificate
openssl_x509_checkpurpose — Verifies if a certificate can be used for a particular purpose
openssl_x509_export_to_file — Exports a certificate to file
openssl_x509_export — Exports a certificate as a string
openssl_x509_free — Free certificate resource
openssl_x509_parse — Parse an X509 certificate and return the information as an array
openssl_x509_read — Parse an X.509 certificate and return a resource identifier for it
CXIII. Oracle
ora_bind — Binds a PHP variable to an Oracle parameter
ora_close — Closes an Oracle cursor
ora_columnname — Gets the name of an Oracle result column
ora_columnsize — Returns the size of an Oracle result column
ora_columntype — Gets the type of an Oracle result column
ora_commit — Commit an Oracle transaction
ora_commitoff — Disable automatic commit
ora_commiton — Enable automatic commit
ora_do — Parse, Exec, Fetch
ora_error — Gets an Oracle error message
ora_errorcode — Gets an Oracle error code
ora_exec — Execute a parsed statement on an Oracle cursor
ora_fetch_into — Fetch a row into the specified result array
ora_fetch — Fetch a row of data from a cursor
ora_getcolumn — Get data from a fetched column
ora_logoff — Close an Oracle connection
ora_logon — Open an Oracle connection
ora_numcols — Returns the number of columns
ora_numrows — Returns the number of rows
ora_open — Opens an Oracle cursor
ora_parse — Parse an SQL statement with Oracle
ora_plogon — Open a persistent Oracle connection
ora_rollback — Rolls back a transaction
CXIV. Oracle (PDO)
PDO_OCI DSN — Connecting to Oracle databases
CXV. Output Control
flush — Flush the output buffer
ob_clean — Clean (erase) the output buffer
ob_end_clean — Clean (erase) the output buffer and turn off output buffering
ob_end_flush — Flush (send) the output buffer and turn off output buffering
ob_flush — Flush (send) the output buffer
ob_get_clean — Get current buffer contents and delete current output buffer
ob_get_contents — Return the contents of the output buffer
ob_get_flush — Flush the output buffer, return it as a string and turn off output buffering
ob_get_length — Return the length of the output buffer
ob_get_level — Return the nesting level of the output buffering mechanism
ob_get_status — Get status of output buffers
ob_gzhandler — ob_start callback function to gzip output buffer
ob_implicit_flush — Turn implicit flush on/off
ob_list_handlers — List all output handlers in use
ob_start — Turn on output buffering
output_add_rewrite_var — Add URL rewriter values
output_reset_rewrite_vars — Reset URL rewriter values
CXVI. OvrimosSQL
ovrimos_close — Closes the connection to ovrimos
ovrimos_commit — Commits the transaction
ovrimos_connect — Connect to the specified database
ovrimos_cursor — Returns the name of the cursor
ovrimos_exec — Executes an SQL statement
ovrimos_execute — Executes a prepared SQL statement
ovrimos_fetch_into — Fetches a row from the result set
ovrimos_fetch_row — Fetches a row from the result set
ovrimos_field_len — Returns the length of the output column
ovrimos_field_name — Returns the output column name
ovrimos_field_num — Returns the (1-based) index of the output column
ovrimos_field_type — Returns the type of the output column
ovrimos_free_result — Frees the specified result_id
ovrimos_longreadlen — Specifies how many bytes are to be retrieved from long datatypes
ovrimos_num_fields — Returns the number of columns
ovrimos_num_rows — Returns the number of rows affected by update operations
ovrimos_prepare — Prepares an SQL statement
ovrimos_result_all — Prints the whole result set as an HTML table
ovrimos_result — Retrieves the output column
ovrimos_rollback — Rolls back the transaction
CXVII. Paradox
px_close — Closes a paradox database
px_create_fp — Create a new paradox database
px_date2string — Converts a date into a string.
px_delete_record — Deletes record from paradox database
px_delete — Deletes resource of paradox database
px_get_field — Returns the specification of a single field
px_get_info — Return lots of information about a paradox file
px_get_parameter — Gets a parameter
px_get_record — Returns record of paradox database
px_get_schema — Returns the database schema
px_get_value — Gets a value
px_insert_record — Inserts record into paradox database
px_new — Create a new paradox object
px_numfields — Returns number of fields in a database
px_numrecords — Returns number of records in a database
px_open_fp — Open paradox database
px_put_record — Stores record into paradox database
px_retrieve_record — Returns record of paradox database
px_set_blob_file — Sets the file where blobs are read from
px_set_parameter — Sets a parameter
px_set_tablename — Sets the name of a table (deprecated)
px_set_targetencoding — Sets the encoding for character fields (deprecated)
px_set_value — Sets a value
px_timestamp2string — Converts the timestamp into a string.
px_update_record — Updates record in paradox database
CXVIII. Parsekit
parsekit_compile_file — Compile a string of PHP code and return the resulting op array
parsekit_compile_string — Compile a string of PHP code and return the resulting op array
parsekit_func_arginfo — Return information regarding function argument(s)
CXIX. PCNTL
pcntl_alarm — Set an alarm clock for delivery of a signal
pcntl_exec — Executes specified program in current process space
pcntl_fork — Forks the currently running process
pcntl_getpriority — Get the priority of any process
pcntl_setpriority — Change the priority of any process
pcntl_signal — Installs a signal handler
pcntl_wait — Waits on or returns the status of a forked child
pcntl_waitpid — Waits on or returns the status of a forked child
pcntl_wexitstatus — Returns the return code of a terminated child
pcntl_wifexited — Checks if status code represents a normal exit
pcntl_wifsignaled — Checks whether the status code represents a termination due to a signal
pcntl_wifstopped — Checks whether the child process is currently stopped
pcntl_wstopsig — Returns the signal which caused the child to stop
pcntl_wtermsig — Returns the signal which caused the child to terminate
CXX. PCRE
Pattern Modifiers — Describes possible modifiers in regex patterns
Pattern Syntax — Describes PCRE regex syntax
preg_grep — Return array entries that match the pattern
preg_last_error — Returns the error code of the last PCRE regex execution
preg_match_all — Perform a global regular expression match
preg_match — Perform a regular expression match
preg_quote — Quote regular expression characters
preg_replace_callback — Perform a regular expression search and replace using a callback
preg_replace — Perform a regular expression search and replace
preg_split — Split string by a regular expression
CXXI. PDF
PDF_activate_item — Activate structure element or other content item
PDF_add_annotation — Add annotation [deprecated]
PDF_add_bookmark — Add bookmark for current page [deprecated]
PDF_add_launchlink — Add launch annotation for current page [deprecated]
PDF_add_locallink — Add link annotation for current page [deprecated]
PDF_add_nameddest — Create named destination
PDF_add_note — Set annotation for current page [deprecated]
PDF_add_outline — Add bookmark for current page [deprecated]
PDF_add_pdflink — Add file link annotation for current page [deprecated]
PDF_add_table_cell — Add a cell to a new or existing table
PDF_add_textflow — Create Textflow or add text to existing Textflow
PDF_add_thumbnail — Add thumbnail for current page
PDF_add_weblink — Add weblink for current page [deprecated]
PDF_arc — Draw a counterclockwise circular arc segment
PDF_arcn — Draw a clockwise circular arc segment
PDF_attach_file — Add file attachment for current page [deprecated]
PDF_begin_document — Create new PDF file
PDF_begin_font — Start a Type 3 font definition
PDF_begin_glyph — Start glyph definition for Type 3 font
PDF_begin_item — Open structure element or other content item
PDF_begin_layer — Start layer
PDF_begin_page_ext — Start new page
PDF_begin_page — Start new page [deprecated]
PDF_begin_pattern — Start pattern definition
PDF_begin_template_ext — Start template definition
PDF_begin_template — Start template definition [deprecated]
PDF_circle — Draw a circle
PDF_clip — Clip to current path
PDF_close_image — Close image
PDF_close_pdi_page — Close the page handle
PDF_close_pdi — Close the input PDF document [deprecated]
PDF_close — Close pdf resource [deprecated]
PDF_closepath_fill_stroke — Close, fill and stroke current path
PDF_closepath_stroke — Close and stroke path
PDF_closepath — Close current path
PDF_concat — Concatenate a matrix to the CTM
PDF_continue_text — Output text in next line
PDF_create_3dview — Create 3D view
PDF_create_action — Create action for objects or events
PDF_create_annotation — Create rectangular annotation
PDF_create_bookmark — Create bookmark
PDF_create_field — Create form field
PDF_create_fieldgroup — Create form field group
PDF_create_gstate — Create graphics state object
PDF_create_pvf — Create PDFlib virtual file
PDF_create_textflow — Create textflow object
PDF_curveto — Draw Bezier curve
PDF_define_layer — Create layer definition
PDF_delete_pvf — Delete PDFlib virtual file
PDF_delete_table — Delete table object
PDF_delete_textflow — Delete textflow object
PDF_delete — Delete PDFlib object
PDF_encoding_set_char — Add glyph name and/or Unicode value
PDF_end_document — Close PDF file
PDF_end_font — Terminate Type 3 font definition
PDF_end_glyph — Terminate glyph definition for Type 3 font
PDF_end_item — Close structure element or other content item
PDF_end_layer — Deactivate all active layers
PDF_end_page_ext — Finish page
PDF_end_page — Finish page
PDF_end_pattern — Finish pattern
PDF_end_template — Finish template
PDF_endpath — End current path
PDF_fill_imageblock — Fill image block with variable data
PDF_fill_pdfblock — Fill PDF block with variable data
PDF_fill_stroke — Fill and stroke path
PDF_fill_textblock — Fill text block with variable data
PDF_fill — Fill current path
PDF_findfont — Prepare font for later use [deprecated]
PDF_fit_image — Place image or template
PDF_fit_pdi_page — Place imported PDF page
PDF_fit_table — Place table on page
PDF_fit_textflow — Format textflow in rectangular area
PDF_fit_textline — Place single line of text
PDF_get_apiname — Get name of unsuccessfull API function
PDF_get_buffer — Get PDF output buffer
PDF_get_errmsg — Get error text
PDF_get_errnum — Get error number
PDF_get_font — Get font [deprecated]
PDF_get_fontname — Get font name [deprecated]
PDF_get_fontsize — Font handling [deprecated]
PDF_get_image_height — Get image height [deprecated]
PDF_get_image_width — Get image width [deprecated]
PDF_get_majorversion — Get major version number [deprecated]
PDF_get_minorversion — Get minor version number [deprecated]
PDF_get_parameter — Get string parameter
PDF_get_pdi_parameter — Get PDI string parameter [deprecated]
PDF_get_pdi_value — Get PDI numerical parameter [deprecated]
PDF_get_value — Get numerical parameter
PDF_info_font — Query detailed information about a loaded font
PDF_info_matchbox — Query matchbox information
PDF_info_table — Retrieve table information
PDF_info_textflow — Query textflow state
PDF_info_textline — Perform textline formatting and query metrics
PDF_initgraphics — Reset graphic state
PDF_lineto — Draw a line
PDF_load_3ddata — Load 3D model
PDF_load_font — Search and prepare font
PDF_load_iccprofile — Search and prepare ICC profile
PDF_load_image — Open image file
PDF_makespotcolor — Make spot color
PDF_moveto — Set current point
PDF_new — Create PDFlib object
PDF_open_ccitt — Open raw CCITT image [deprecated]
PDF_open_file — Create PDF file [deprecated]
PDF_open_gif — Open GIF image [deprecated]
PDF_open_image_file — Read image from file [deprecated]
PDF_open_image — Use image data [deprecated]
PDF_open_jpeg — Open JPEG image [deprecated]
PDF_open_memory_image — Open image created with PHP's image functions [not supported]
PDF_open_pdi_page — Prepare a page
PDF_open_pdi — Open PDF file [deprecated]
PDF_open_tiff — Open TIFF image [deprecated]
PDF_pcos_get_number — Get value of pCOS path with type number or boolean
PDF_pcos_get_stream — Get contents of pCOS path with type stream, fstream, or string
PDF_pcos_get_string — Get value of pCOS path with type name, string, or boolean
PDF_place_image — Place image on the page [deprecated]
PDF_place_pdi_page — Place PDF page [deprecated]
PDF_process_pdi — Process imported PDF document
PDF_rect — Draw rectangle
PDF_restore — Restore graphics state
PDF_resume_page — Resume page
PDF_rotate — Rotate coordinate system
PDF_save — Save graphics state
PDF_scale — Scale coordinate system
PDF_set_border_color — Set border color of annotations [deprecated]
PDF_set_border_dash — Set border dash style of annotations [deprecated]
PDF_set_border_style — Set border style of annotations [deprecated]
PDF_set_char_spacing — Set character spacing [deprecated]
PDF_set_duration — Set duration between pages [deprecated]
PDF_set_gstate — Activate graphics state object
PDF_set_horiz_scaling — Set horizontal text scaling [deprecated]
PDF_set_info_author — Fill the author document info field [deprecated]
PDF_set_info_creator — Fill the creator document info field [deprecated]
PDF_set_info_keywords — Fill the keywords document info field [deprecated]
PDF_set_info_subject — Fill the subject document info field [deprecated]
PDF_set_info_title — Fill the title document info field [deprecated]
PDF_set_info — Fill document info field
PDF_set_layer_dependency — Define relationships among layers
PDF_set_leading — Set distance between text lines [deprecated]
PDF_set_parameter — Set string parameter
PDF_set_text_matrix — Set text matrix [deprecated]
PDF_set_text_pos — Set text position
PDF_set_text_rendering — Determine text rendering [deprecated]
PDF_set_text_rise — Set text rise [deprecated]
PDF_set_value — Set numerical parameter
PDF_set_word_spacing — Set spacing between words [deprecated]
PDF_setcolor — Set fill and stroke color
PDF_setdash — Set simple dash pattern
PDF_setdashpattern — Set dash pattern
PDF_setflat — Set flatness
PDF_setfont — Set font
PDF_setgray_fill — Set fill color to gray [deprecated]
PDF_setgray_stroke — Set stroke color to gray [deprecated]
PDF_setgray — Set color to gray [deprecated]
PDF_setlinecap — Set linecap parameter
PDF_setlinejoin — Set linejoin parameter
PDF_setlinewidth — Set line width
PDF_setmatrix — Set current transformation matrix
PDF_setmiterlimit — Set miter limit
PDF_setpolydash — Set complicated dash pattern [deprecated]
PDF_setrgbcolor_fill — Set fill rgb color values [deprecated]
PDF_setrgbcolor_stroke — Set stroke rgb color values [deprecated]
PDF_setrgbcolor — Set fill and stroke rgb color values [deprecated]
PDF_shading_pattern — Define shading pattern
PDF_shading — Define blend
PDF_shfill — Fill area with shading
PDF_show_boxed — Output text in a box [deprecated]
PDF_show_xy — Output text at given position
PDF_show — Output text at current position
PDF_skew — Skew the coordinate system
PDF_stringwidth — Return width of text
PDF_stroke — Stroke path
PDF_suspend_page — Suspend page
PDF_translate — Set origin of coordinate system
PDF_utf16_to_utf8 — Convert string from UTF-16 to UTF-8
PDF_utf32_to_utf16 — Convert string from UTF-32 to UTF-16
PDF_utf8_to_utf16 — Convert string from UTF-8 to UTF-16
CXXII. PDO
PDO->beginTransaction() — Initiates a transaction
PDO->commit() — Commits a transaction
PDO->__construct() — Creates a PDO instance representing a connection to a database
PDO->errorCode() — Fetch the SQLSTATE associated with the last operation on the database handle
PDO->errorInfo() — Fetch extended error information associated with the last operation on the database handle
PDO->exec() — Execute an SQL statement and return the number of affected rows
PDO->getAttribute() — Retrieve a database connection attribute
PDO->getAvailableDrivers() — Return an array of available PDO drivers
PDO->lastInsertId() — Returns the ID of the last inserted row or sequence value
PDO->prepare() — Prepares a statement for execution and returns a statement object
PDO->query() — Executes an SQL statement, returning a result set as a PDOStatement object
PDO->quote() — Quotes a string for use in a query.
PDO->rollBack() — Rolls back a transaction
PDO->setAttribute() — Set an attribute
PDOStatement->bindColumn() — Bind a column to a PHP variable
PDOStatement->bindParam() — Binds a parameter to the specified variable name
PDOStatement->bindValue() — Binds a value to a parameter
PDOStatement->closeCursor() — Closes the cursor, enabling the statement to be executed again.
PDOStatement->columnCount() — Returns the number of columns in the result set
PDOStatement->errorCode() — Fetch the SQLSTATE associated with the last operation on the statement handle
PDOStatement->errorInfo() — Fetch extended error information associated with the last operation on the statement handle
PDOStatement->execute() — Executes a prepared statement
PDOStatement->fetch() — Fetches the next row from a result set
PDOStatement->fetchAll() — Returns an array containing all of the result set rows
PDOStatement->fetchColumn() — Returns a single column from the next row of a result set
PDOStatement->fetchObject() — Fetches the next row and returns it as an object.
PDOStatement->getAttribute() — Retrieve a statement attribute
PDOStatement->getColumnMeta() — Returns metadata for a column in a result set
PDOStatement->nextRowset() — Advances to the next rowset in a multi-rowset statement handle
PDOStatement->rowCount() — Returns the number of rows affected by the last SQL statement
PDOStatement->setAttribute() — Set a statement attribute
PDOStatement->setFetchMode() — Set the default fetch mode for this statement
CXXIII. phar
Phar::apiVersion — Returns the api version
Phar::canCompress — Returns whether phar extension supports compression using either zlib or bzip2
Phar::canWrite — Returns whether phar extension supports writing and creating phars
Phar->compressAllFilesBZIP2 — Compresses all files in the current Phar archive using Bzip2 compression
Phar->compressAllFilesGZ — Compresses all files in the current Phar archive using Gzip compression
Phar::__construct — Construct a Phar archive object
Phar->count — Returns the number of entries (files) in the Phar archive
Phar->getMetaData — Returns phar archive meta-data
Phar->getModified — Return whether phar was modified
Phar->getSignature — Return MD5/SHA1 signature of a Phar archive
Phar->getStub — Return the PHP loader or bootstrap stub of a Phar archive
Phar->getVersion — Return version info of Phar archive
Phar->isBuffering — Used to determine whether Phar write operations are being buffered, or are flushing directly to disk
Phar::loadPhar — Loads any phar archive with an alias
Phar::mapPhar — Reads the currently executed file (a phar) and registers its manifest
Phar::offsetExists — determines whether a file exists in the phar
Phar::offsetGet — get a PharFileInfo object for a specific file
Phar::offsetSet — set the contents of an internal file to those of an external file
Phar::offsetUnset — remove a file from a phar
Phar->setMetaData — Sets phar archive meta-data
Phar->setStub — Used to set the PHP loader or bootstrap stub of a Phar archive
Phar->startBuffering — Start buffering Phar write operations, do not modify the Phar object on disk
Phar->stopBuffering — Stop buffering write requests to the Phar archive, and save changes to disk
Phar->uncompressAllFiles — Uncompresses all files in the current Phar archive
PharFileInfo->chmod — Sets file-specific permission bits
PharFileInfo::__construct — Construct a Phar entry object
PharFileInfo->getCompressedSize — Returns the actual size of the file (with compression) inside the Phar archive
PharFileInfo->getCRC32 — Returns CRC32 code or throws an exception if not CRC checked
PharFileInfo->getMetaData — Returns file-specific meta-data saved with a file
PharFileInfo->getPharFlags — Returns the Phar file entry flags
PharFileInfo->isCompressed — Returns whether the entry is compressed
PharFileInfo->isCompressedBZIP2 — Returns whether the entry is compressed using bzip2
PharFileInfo->isCompressedGZ — Returns whether the entry is compressed using gz
PharFileInfo->isCRCChecked — Returns whether file entry has had its CRC verified
PharFileInfo->setCompressedBZIP2 — Compresses the current Phar entry within the phar using Bzip2 compression
PharFileInfo->setCompressedGZ — Compresses the current Phar entry within the phar using gz compression
PharFileInfo->setMetaData — Sets file-specific meta-data saved with a file
PharFileInfo->setUncompressed — Uncompresses the current Phar entry within the phar, if it is compressed
CXXIV. PHP Options/Info
assert_options — Set/get the various assert flags
assert — Checks if assertion is FALSE
dl — Loads a PHP extension at runtime
extension_loaded — Find out whether an extension is loaded
get_cfg_var — Gets the value of a PHP configuration option
get_current_user — Gets the name of the owner of the current PHP script
get_defined_constants — Returns an associative array with the names of all the constants and their values
get_extension_funcs — Returns an array with the names of the functions of a module
get_include_path — Gets the current include_path configuration option
get_included_files — Returns an array with the names of included or required files
get_loaded_extensions — Returns an array with the names of all modules compiled and loaded
get_magic_quotes_gpc — Gets the current configuration setting of magic quotes gpc
get_magic_quotes_runtime — Gets the current active configuration setting of magic_quotes_runtime
get_required_files — Alias of get_included_files()
getenv — Gets the value of an environment variable
getlastmod — Gets time of last page modification
getmygid — Get PHP script owner's GID
getmyinode — Gets the inode of the current script
getmypid — Gets PHP's process ID
getmyuid — Gets PHP script owner's UID
getopt — Gets options from the command line argument list
getrusage — Gets the current resource usages
ini_alter — Alias of ini_set()
ini_get_all — Gets all configuration options
ini_get — Gets the value of a configuration option
ini_restore — Restores the value of a configuration option
ini_set — Sets the value of a configuration option
main — Dummy for main()
memory_get_peak_usage — Returns the peak of memory allocated by PHP
memory_get_usage — Returns the amount of memory allocated to PHP
php_ini_scanned_files — Return a list of .ini files parsed from the additional ini dir
php_logo_guid — Gets the logo guid
php_sapi_name — Returns the type of interface between web server and PHP
php_uname — Returns information about the operating system PHP is running on
phpcredits — Prints out the credits for PHP
phpinfo — Outputs lots of PHP information
phpversion — Gets the current PHP version
putenv — Sets the value of an environment variable
restore_include_path — Restores the value of the include_path configuration option
set_include_path — Sets the include_path configuration option
set_magic_quotes_runtime — Sets the current active configuration setting of magic_quotes_runtime
set_time_limit — Limits the maximum execution time
sys_get_temp_dir — Returns directory path used for temporary files
version_compare — Compares two "PHP-standardized" version number strings
zend_logo_guid — Gets the Zend guid
zend_thread_id — Returns a unique identifier for the current thread
zend_version — Gets the version of the current Zend engine
CXXV. POSIX
posix_access — Determine accessibility of a file
posix_ctermid — Get path name of controlling terminal
posix_get_last_error — Retrieve the error number set by the last posix function that failed
posix_getcwd — Pathname of current directory
posix_getegid — Return the effective group ID of the current process
posix_geteuid — Return the effective user ID of the current process
posix_getgid — Return the real group ID of the current process
posix_getgrgid — Return info about a group by group id
posix_getgrnam — Return info about a group by name
posix_getgroups — Return the group set of the current process
posix_getlogin — Return login name
posix_getpgid — Get process group id for job control
posix_getpgrp — Return the current process group identifier
posix_getpid — Return the current process identifier
posix_getppid — Return the parent process identifier
posix_getpwnam — Return info about a user by username
posix_getpwuid — Return info about a user by user id
posix_getrlimit — Return info about system resource limits
posix_getsid — Get the current sid of the process
posix_getuid — Return the real user ID of the current process
posix_initgroups — Calculate the group access list
posix_isatty — Determine if a file descriptor is an interactive terminal
posix_kill — Send a signal to a process
posix_mkfifo — Create a fifo special file (a named pipe)
posix_mknod — Create a special or ordinary file (POSIX.1)
posix_setegid — Set the effective GID of the current process
posix_seteuid — Set the effective UID of the current process
posix_setgid — Set the GID of the current process
posix_setpgid — Set process group id for job control
posix_setsid — Make the current process a session leader
posix_setuid — Set the UID of the current process
posix_strerror — Retrieve the system error message associated with the given errno
posix_times — Get process times
posix_ttyname — Determine terminal device name
posix_uname — Get system name
CXXVI. POSIX Regex
ereg_replace — Replace regular expression
ereg — Regular expression match
eregi_replace — Replace regular expression case insensitive
eregi — Case insensitive regular expression match
split — Split string into array by regular expression
spliti — Split string into array by regular expression case insensitive
sql_regcase — Make regular expression for case insensitive match
CXXVII. PostgreSQL
pg_affected_rows — Returns number of affected records (tuples)
pg_cancel_query — Cancel an asynchronous query
pg_client_encoding — Gets the client encoding
pg_close — Closes a PostgreSQL connection
pg_connect — Open a PostgreSQL connection
pg_connection_busy — Get connection is busy or not
pg_connection_reset — Reset connection (reconnect)
pg_connection_status — Get connection status
pg_convert — Convert associative array values into suitable for SQL statement
pg_copy_from — Insert records into a table from an array
pg_copy_to — Copy a table to an array
pg_dbname — Get the database name
pg_delete — Deletes records
pg_end_copy — Sync with PostgreSQL backend
pg_escape_bytea — Escape a string for insertion into a bytea field
pg_escape_string — Escape a string for insertion into a text field
pg_execute — Sends a request to execute a prepared statement with given parameters, and waits for the result.
pg_fetch_all_columns — Fetches all rows in a particular result column as an array
pg_fetch_all — Fetches all rows from a result as an array
pg_fetch_array — Fetch a row as an array
pg_fetch_assoc — Fetch a row as an associative array
pg_fetch_object — Fetch a row as an object
pg_fetch_result — Returns values from a result resource
pg_fetch_row — Get a row as an enumerated array
pg_field_is_null — Test if a field is SQL NULL
pg_field_name — Returns the name of a field
pg_field_num — Returns the field number of the named field
pg_field_prtlen — Returns the printed length
pg_field_size — Returns the internal storage size of the named field
pg_field_table — Returns the name or oid of the tables field
pg_field_type_oid — Returns the type ID (OID) for the corresponding field number
pg_field_type — Returns the type name for the corresponding field number
pg_free_result — Free result memory
pg_get_notify — Gets SQL NOTIFY message
pg_get_pid — Gets the backend's process ID
pg_get_result — Get asynchronous query result
pg_host — Returns the host name associated with the connection
pg_insert — Insert array into table
pg_last_error — Get the last error message string of a connection
pg_last_notice — Returns the last notice message from PostgreSQL server
pg_last_oid — Returns the last row's OID
pg_lo_close — Close a large object
pg_lo_create — Create a large object
pg_lo_export — Export a large object to file
pg_lo_import — Import a large object from file
pg_lo_open — Open a large object
pg_lo_read_all — Reads an entire large object and send straight to browser
pg_lo_read — Read a large object
pg_lo_seek — Seeks position within a large object
pg_lo_tell — Returns current seek position a of large object
pg_lo_unlink — Delete a large object
pg_lo_write — Write to a large object
pg_meta_data — Get meta data for table
pg_num_fields — Returns the number of fields in a result
pg_num_rows — Returns the number of rows in a result
pg_options — Get the options associated with the connection
pg_parameter_status — Looks up a current parameter setting of the server.
pg_pconnect — Open a persistent PostgreSQL connection
pg_ping — Ping database connection
pg_port — Return the port number associated with the connection
pg_prepare — Submits a request to create a prepared statement with the given parameters, and waits for completion.
pg_put_line — Send a NULL-terminated string to PostgreSQL backend
pg_query_params — Submits a command to the server and waits for the result, with the ability to pass parameters separately from the SQL command text.
pg_query — Execute a query
pg_result_error_field — Returns an individual field of an error report.
pg_result_error — Get error message associated with result
pg_result_seek — Set internal row offset in result resource
pg_result_status — Get status of query result
pg_select — Select records
pg_send_execute — Sends a request to execute a prepared statement with given parameters, without waiting for the result(s).
pg_send_prepare — Sends a request to create a prepared statement with the given parameters, without waiting for completion.
pg_send_query_params — Submits a command and separate parameters to the server without waiting for the result(s).
pg_send_query — Sends asynchronous query
pg_set_client_encoding — Set the client encoding
pg_set_error_verbosity — Determines the verbosity of messages returned by pg_last_error() and pg_result_error().
pg_trace — Enable tracing a PostgreSQL connection
pg_transaction_status — Returns the current in-transaction status of the server.
pg_tty — Return the TTY name associated with the connection
pg_unescape_bytea — Unescape binary for bytea type
pg_untrace — Disable tracing of a PostgreSQL connection
pg_update — Update table
pg_version — Returns an array with client, protocol and server version (when available)
CXXVIII. PostgreSQL (PDO)
PDO_PGSQL DSN — Connecting to PostgreSQL databases
PDO::pgsqlLOBCreate — Creates a new large object
PDO::pgsqlLOBOpen — Opens an existing large object stream
PDO::pgsqlLOBUnlink — Deletes the large object
CXXIX. Printer
printer_abort — Deletes the printer's spool file
printer_close — Close an open printer connection
printer_create_brush — Create a new brush
printer_create_dc — Create a new device context
printer_create_font — Create a new font
printer_create_pen — Create a new pen
printer_delete_brush — Delete a brush
printer_delete_dc — Delete a device context
printer_delete_font — Delete a font
printer_delete_pen — Delete a pen
printer_draw_bmp — Draw a bmp
printer_draw_chord — Draw a chord
printer_draw_elipse — Draw an ellipse
printer_draw_line — Draw a line
printer_draw_pie — Draw a pie
printer_draw_rectangle — Draw a rectangle
printer_draw_roundrect — Draw a rectangle with rounded corners
printer_draw_text — Draw text
printer_end_doc — Close document
printer_end_page — Close active page
printer_get_option — Retrieve printer configuration data
printer_list — Return an array of printers attached to the server
printer_logical_fontheight — Get logical font height
printer_open — Opens a connection to a printer
printer_select_brush — Select a brush
printer_select_font — Select a font
printer_select_pen — Select a pen
printer_set_option — Configure the printer connection
printer_start_doc — Start a new document
printer_start_page — Start a new page
printer_write — Write data to the printer
CXXX. Program Execution
escapeshellarg — Escape a string to be used as a shell argument
escapeshellcmd — Escape shell metacharacters
exec — Execute an external program
passthru — Execute an external program and display raw output
proc_close — Close a process opened by proc_open() and return the exit code of that process.
proc_get_status — Get information about a process opened by proc_open()
proc_nice — Change the priority of the current process
proc_open — Execute a command and open file pointers for input/output
proc_terminate — Kills a process opened by proc_open
shell_exec — Execute command via shell and return the complete output as a string
system — Execute an external program and display the output
CXXXI. PS
ps_add_bookmark — Add bookmark to current page
ps_add_launchlink — Adds link which launches file
ps_add_locallink — Adds link to a page in the same document
ps_add_note — Adds note to current page
ps_add_pdflink — Adds link to a page in a second pdf document
ps_add_weblink — Adds link to a web location
ps_arc — Draws an arc counterclockwise
ps_arcn — Draws an arc clockwise
ps_begin_page — Start a new page
ps_begin_pattern — Start a new pattern
ps_begin_template — Start a new template
ps_circle — Draws a circle
ps_clip — Clips drawing to current path
ps_close_image — Closes image and frees memory
ps_close — Closes a PostScript document
ps_closepath_stroke — Closes and strokes path
ps_closepath — Closes path
ps_continue_text — Continue text in next line
ps_curveto — Draws a curve
ps_delete — Deletes all resources of a PostScript document
ps_end_page — End a page
ps_end_pattern — End a pattern
ps_end_template — End a template
ps_fill_stroke — Fills and strokes the current path
ps_fill — Fills the current path
ps_findfont — Loads a font
ps_get_buffer — Fetches the full buffer containig the generated PS data
ps_get_parameter — Gets certain parameters
ps_get_value — Gets certain values
ps_hyphenate — Hyphenates a word
ps_include_file — Reads an external file with raw PostScript code
ps_lineto — Draws a line
ps_makespotcolor — Create spot color
ps_moveto — Sets current point
ps_new — Creates a new PostScript document object
ps_open_file — Opens a file for output
ps_open_image_file — Opens image from file
ps_open_image — Reads an image for later placement
ps_open_memory_image — Takes an GD image and returns an image for placement in a PS document
ps_place_image — Places image on the page
ps_rect — Draws a rectangle
ps_restore — Restore previously save context
ps_rotate — Sets rotation factor
ps_save — Save current context
ps_scale — Sets scaling factor
ps_set_border_color — Sets color of border for annotations
ps_set_border_dash — Sets length of dashes for border of annotations
ps_set_border_style — Sets border style of annotations
ps_set_info — Sets information fields of document
ps_set_parameter — Sets certain parameters
ps_set_text_pos — Sets position for text output
ps_set_value — Sets certain values
ps_setcolor — Sets current color
ps_setdash — Sets appearance of a dashed line
ps_setflat — Sets flatness
ps_setfont — Sets font to use for following output
ps_setgray — Sets gray value
ps_setlinecap — Sets appearance of line ends
ps_setlinejoin — Sets how contected lines are joined
ps_setlinewidth — Sets width of a line
ps_setmiterlimit — Sets the miter limit
ps_setoverprintmode — Sets overprint mode
ps_setpolydash — Sets appearance of a dashed line
ps_shading_pattern — Creates a pattern based on a shading
ps_shading — Creates a shading for later use
ps_shfill — Fills an area with a shading
ps_show_boxed — Output text in a box
ps_show_xy2 — Output text at position
ps_show_xy — Output text at given position
ps_show2 — Output a text at current position
ps_show — Output text
ps_string_geometry — Gets geometry of a string
ps_stringwidth — Gets width of a string
ps_stroke — Draws the current path
ps_symbol_name — Gets name of a glyph
ps_symbol_width — Gets width of a glyph
ps_symbol — Output a glyph
ps_translate — Sets translation
CXXXII. Pspell
pspell_add_to_personal — Add the word to a personal wordlist
pspell_add_to_session — Add the word to the wordlist in the current session
pspell_check — Check a word
pspell_clear_session — Clear the current session
pspell_config_create — Create a config used to open a dictionary
pspell_config_data_dir — location of language data files
pspell_config_dict_dir — Location of the main word list
pspell_config_ignore — Ignore words less than N characters long
pspell_config_mode — Change the mode number of suggestions returned
pspell_config_personal — Set a file that contains personal wordlist
pspell_config_repl — Set a file that contains replacement pairs
pspell_config_runtogether — Consider run-together words as valid compounds
pspell_config_save_repl — Determine whether to save a replacement pairs list along with the wordlist
pspell_new_config — Load a new dictionary with settings based on a given config
pspell_new_personal — Load a new dictionary with personal wordlist
pspell_new — Load a new dictionary
pspell_save_wordlist — Save the personal wordlist to a file
pspell_store_replacement — Store a replacement pair for a word
pspell_suggest — Suggest spellings of a word
CXXXIII. qtdom
qdom_error — Returns the error string from the last QDOM operation or FALSE if no errors occurred
qdom_tree — Creates a tree of an XML string
CXXXIV. radius
radius_acct_open — Creates a Radius handle for accounting
radius_add_server — Adds a server
radius_auth_open — Creates a Radius handle for authentication
radius_close — Frees all ressources
radius_config — Causes the library to read the given configuration file
radius_create_request — Create accounting or authentication request
radius_cvt_addr — Converts raw data to IP-Address
radius_cvt_int — Converts raw data to integer
radius_cvt_string — Converts raw data to string
radius_demangle_mppe_key — Derives mppe-keys from mangled data
radius_demangle — Demangles data
radius_get_attr — Extracts an attribute
radius_get_vendor_attr — Extracts a vendor specific attribute
radius_put_addr — Attaches an IP-Address attribute
radius_put_attr — Attaches a binary attribute
radius_put_int — Attaches an integer attribute
radius_put_string — Attaches a string attribute
radius_put_vendor_addr — Attaches a vendor specific IP-Address attribute
radius_put_vendor_attr — Attaches a vendor specific binary attribute
radius_put_vendor_int — Attaches a vendor specific integer attribute
radius_put_vendor_string — Attaches a vendor specific string attribute
radius_request_authenticator — Returns the request authenticator
radius_send_request — Sends the request and waites for a reply
radius_server_secret — Returns the shared secret
radius_strerror — Returns an error message
CXXXV. Rar
rar_close — Close Rar archive and free all resources
rar_entry_get — Get entry object from the Rar archive
Rar::extract — Extract entry from the archive
Rar::getAttr — Get attributes of the entry
Rar::getCrc — Get CRC of the entry
Rar::getFileTime — Get entry last modification time
Rar::getHostOs — Get entry host OS
Rar::getMethod — Get pack method of the entry
Rar::getName — Get name of the entry
Rar::getPackedSize — Get packed size of the entry
Rar::getUnpackedSize — Get unpacked size of the entry
Rar::getVersion — Get version of the archiver used to add the entry
rar_list — Get entries list from the Rar archive
rar_open — Open Rar archive
CXXXVI. Readline
readline_add_history — Adds a line to the history
readline_callback_handler_install — Initializes the readline callback interface and terminal, prints the prompt and returns immediately
readline_callback_handler_remove — Removes a previously installed callback handler and restores terminal settings
readline_callback_read_char — Reads a character and informs the readline callback interface when a line is received
readline_clear_history — Clears the history
readline_completion_function — Registers a completion function
readline_info — Gets/sets various internal readline variables
readline_list_history — Lists the history
readline_on_new_line — Inform readline that the cursor has moved to a new line
readline_read_history — Reads the history
readline_redisplay — Redraws the display
readline_write_history — Writes the history
readline — Reads a line
CXXXVII. Recode
recode_file — Recode from file to file according to recode request
recode_string — Recode a string according to a recode request
recode — Alias of recode_string()
CXXXVIII. RPMReader
rpm_close — Closes an RPM file
rpm_get_tag — Retrieves a header tag from an RPM file
rpm_is_valid — Tests a filename for validity as an RPM file
rpm_open — Opens an RPM file
rpm_version — Returns a string representing the current version of the rpmreader extension
CXXXIX. runkit
Runkit_Sandbox — Runkit Sandbox Class -- PHP Virtual Machine
Runkit_Sandbox_Parent — Runkit Anti-Sandbox Class
runkit_class_adopt — Convert a base class to an inherited class, add ancestral methods when appropriate
runkit_class_emancipate — Convert an inherited class to a base class, removes any method whose scope is ancestral
runkit_constant_add — Similar to define(), but allows defining in class definitions as well
runkit_constant_redefine — Redefine an already defined constant
runkit_constant_remove — Remove/Delete an already defined constant
runkit_function_add — Add a new function, similar to create_function()
runkit_function_copy — Copy a function to a new function name
runkit_function_redefine — Replace a function definition with a new implementation
runkit_function_remove — Remove a function definition
runkit_function_rename — Change a function's name
runkit_import — Process a PHP file importing function and class definitions, overwriting where appropriate
runkit_lint_file — Check the PHP syntax of the specified file
runkit_lint — Check the PHP syntax of the specified php code
runkit_method_add — Dynamically adds a new method to a given class
runkit_method_copy — Copies a method from class to another
runkit_method_redefine — Dynamically changes the code of the given method
runkit_method_remove — Dynamically removes the given method
runkit_method_rename — Dynamically changes the name of the given method
runkit_return_value_used — Determines if the current functions return value will be used
runkit_sandbox_output_handler — Specify a function to capture and/or process output from a runkit sandbox
runkit_superglobals — Return numerically indexed array of registered superglobals
CXL. SAM
SAMConnection->commit() — Commits (completes) the current unit of work.
SAMConnection->connect() — Establishes a connection to a Messaging Server
SAMConnection->__construct() — Creates a new connection to a Messaging Server
SAMConnection->disconnect() — Disconnects from a Messaging Server
SAMConnection->errno — Contains the unique numeric error code of the last executed SAM operation.
SAMConnection->error — Contains the text description of the last failed SAM operation.
SAMConnection->isConnected() — Queries whether a connection is established to a Messaging Server
SAMConnection->peek() — Read a message from a queue without removing it from the queue.
SAMConnection->peekAll() — Read one or more messages from a queue without removing it from the queue.
SAMConnection->receive() — Receive a message from a queue or subscription.
SAMConnection->remove() — Remove a message from a queue.
SAMConnection->rollback() — Cancels (rolls back) an in-flight unit of work.
SAMConnection->send() — Send a message to a queue or publish an item to a topic.
SAMConnection::setDebug() — Turn on or off additional debugging output.
SAMConnection->subscribe() — Create a subscription to a specified topic.
SAMConnection->unsubscribe() — Cancel a subscription to a specified topic.
SAMMessage->body — The body of the message.
SAMMessage->__construct() — Creates a new Message object
SAMMessage->header — The header properties of the message.
CXLI. Satellite
OrbitEnum — Use CORBA enums
OrbitObject — Access CORBA objects
OrbitStruct — Use CORBA structs
satellite_caught_exception — See if an exception was caught from the previous function
satellite_exception_id — Get the repository id for the latest exception.
satellite_exception_value — Get the exception struct for the latest exception
satellite_get_repository_id — NOT IMPLEMENTED
satellite_load_idl — Instruct the type manager to load an IDL file
satellite_object_to_string — Convert an object to its string representation
CXLII. SCA
SCA_LocalProxy::createDataObject — create an SDO
SCA_SoapProxy::createDataObject — create an SDO
SCA::createDataObject — create an SDO
SCA::getService — Obtain a proxy for a service
CXLIII. SDO
SDO_DAS_ChangeSummary::beginLogging — Begin change logging
SDO_DAS_ChangeSummary::endLogging — End change logging
SDO_DAS_ChangeSummary::getChangeType — Get the type of change made to an SDO_DataObject
SDO_DAS_ChangeSummary::getChangedDataObjects — Get the changed data objects from a change summary
SDO_DAS_ChangeSummary::getOldContainer — Get the old container for a deleted SDO_DataObject
SDO_DAS_ChangeSummary::getOldValues — Get the old values for a given changed SDO_DataObject
SDO_DAS_ChangeSummary::isLogging — Test to see whether change logging is switched on
SDO_DAS_DataFactory::addPropertyToType — Adds a property to a type
SDO_DAS_DataFactory::addType — Add a new type to a model
SDO_DAS_DataFactory::getDataFactory — Get a data factory instance
SDO_DAS_DataObject::getChangeSummary — Get a data object's change summary
SDO_DAS_Setting::getListIndex — Get the list index for a changed many-valued property
SDO_DAS_Setting::getPropertyIndex — Get the property index for a changed property
SDO_DAS_Setting::getPropertyName — Get the property name for a changed property
SDO_DAS_Setting::getValue — Get the old value for the changed property
SDO_DAS_Setting::isSet — Test whether a property was set prior to being modified
SDO_DataFactory::create — Create an SDO_DataObject
SDO_DataObject::clear — Clear an SDO_DataObject's properties
SDO_DataObject::createDataObject — Create a child SDO_DataObject
SDO_DataObject::getContainer — Get a data object's container
SDO_DataObject::getSequence — Get the sequence for a data object
SDO_DataObject::getTypeName — Return the name of the type for a data object.
SDO_DataObject::getTypeNamespaceURI — Return the namespace URI of the type for a data object.
SDO_Exception::getCause — Get the cause of the exception.
SDO_List::insert — Insert into a list
SDO_Model_Property::getContainingType — Get the SDO_Model_Type which contains this property
SDO_Model_Property::getDefault — Get the default value for the property
SDO_Model_Property::getName — Get the name of the SDO_Model_Property
SDO_Model_Property::getType — Get the SDO_Model_Type of the property
SDO_Model_Property::isContainment — Test to see if the property defines a containment relationship
SDO_Model_Property::isMany — Test to see if the property is many-valued
SDO_Model_ReflectionDataObject::__construct — Construct an SDO_Model_ReflectionDataObject
SDO_Model_ReflectionDataObject::export — Get a string describing the SDO_DataObject.
SDO_Model_ReflectionDataObject::getContainmentProperty — Get the property which defines the containment relationship to the data object
SDO_Model_ReflectionDataObject::getInstanceProperties — Get the instance properties of the SDO_DataObject
SDO_Model_ReflectionDataObject::getType — Get the SDO_Model_Type for the SDO_DataObject
SDO_Model_Type::getBaseType — Get the base type for this type
SDO_Model_Type::getName — Get the name of the type
SDO_Model_Type::getNamespaceURI — Get the namespace URI of the type
SDO_Model_Type::getProperties — Get the SDO_Model_Property objects defined for the type
SDO_Model_Type::getProperty — Get an SDO_Model_Property of the type
SDO_Model_Type::isAbstractType — Test to see if this SDO_Model_Type is an abstract data type
SDO_Model_Type::isDataType — Test to see if this SDO_Model_Type is a primitive data type
SDO_Model_Type::isInstance — Test for an SDO_DataObject being an instance of this SDO_Model_Type
SDO_Model_Type::isOpenType — Test to see if this type is an open type
SDO_Model_Type::isSequencedType — Test to see if this is a sequenced type
SDO_Sequence::getProperty — Return the property for the specified sequence index.
SDO_Sequence::insert — Insert into a sequence
SDO_Sequence::move — Move an item to another sequence position
CXLIV. SDO DAS XML
SDO_DAS_XML_Document::getRootDataObject — Returns the root SDO_DataObject
SDO_DAS_XML_Document::getRootElementName — Returns root element's name
SDO_DAS_XML_Document::getRootElementURI — Returns root element's URI string
SDO_DAS_XML_Document::setEncoding — Sets the given string as encoding
SDO_DAS_XML_Document::setXMLDeclaration — Sets the xml declaration
SDO_DAS_XML_Document::setXMLVersion — Sets the given string as xml version
SDO_DAS_XML::addTypes — To load a second or subsequent schema file to a SDO_DAS_XML object
SDO_DAS_XML::create — To create SDO_DAS_XML object for a given schema file
SDO_DAS_XML::createDataObject — Creates SDO_DataObject for a given namespace URI and type name
SDO_DAS_XML::createDocument — Creates an XML Document object from scratch, without the need to load a document from a file or string.
SDO_DAS_XML::loadFile — Returns SDO_DAS_XML_Document object for a given path to xml instance document
SDO_DAS_XML::loadString — Returns SDO_DAS_XML_Document for a given xml instance string
SDO_DAS_XML::saveFile — Saves the SDO_DAS_XML_Document object to a file
SDO_DAS_XML::saveString — Saves the SDO_DAS_XML_Document object to a string
CXLV. SDO-DAS-Relational
SDO_DAS_Relational::applyChanges — Applies the changes made to a data graph back to the database.
SDO_DAS_Relational::__construct — Creates an instance of a Relational Data Access Service
SDO_DAS_Relational::createRootDataObject — Returns the special root object in an otherwise empty data graph. Used when creating a data graph from scratch.
SDO_DAS_Relational::executePreparedQuery — Executes an SQL query passed as a prepared statement, with a list of values to substitute for placeholders, and return the results as a normalised data graph.
SDO_DAS_Relational::executeQuery — Executes a given SQL query against a relational database and returns the results as a normalised data graph.
CXLVI. Semaphore
ftok — Convert a pathname and a project identifier to a System V IPC key
msg_get_queue — Create or attach to a message queue
msg_receive — Receive a message from a message queue
msg_remove_queue — Destroy a message queue
msg_send — Send a message to a message queue
msg_set_queue — Set information in the message queue data structure
msg_stat_queue — Returns information from the message queue data structure
sem_acquire — Acquire a semaphore
sem_get — Get a semaphore id
sem_release — Release a semaphore
sem_remove — Remove a semaphore
shm_attach — Creates or open a shared memory segment
shm_detach — Disconnects from shared memory segment
shm_get_var — Returns a variable from shared memory
shm_put_var — Inserts or updates a variable in shared memory
shm_remove_var — Removes a variable from shared memory
shm_remove — Removes shared memory from Unix systems
CXLVII. SESAM
sesam_affected_rows — Get number of rows affected by an immediate query
sesam_commit — Commit pending updates to the SESAM database
sesam_connect — Open SESAM database connection
sesam_diagnostic — Return status information for last SESAM call
sesam_disconnect — Detach from SESAM connection
sesam_errormsg — Returns error message of last SESAM call
sesam_execimm — Execute an "immediate" SQL-statement
sesam_fetch_array — Fetch one row as an associative array
sesam_fetch_result — Return all or part of a query result
sesam_fetch_row — Fetch one row as an array
sesam_field_array — Return meta information about individual columns in a result
sesam_field_name — Return one column name of the result set
sesam_free_result — Releases resources for the query
sesam_num_fields — Return the number of fields/columns in a result set
sesam_query — Perform a SESAM SQL query and prepare the result
sesam_rollback — Discard any pending updates to the SESAM database
sesam_seek_row — Set scrollable cursor mode for subsequent fetches
sesam_settransaction — Set SESAM transaction parameters
CXLVIII. Session PgSQL
session_pgsql_add_error — Increments error counts and sets last error message
session_pgsql_get_error — Returns number of errors and last error message
session_pgsql_get_field — Get custom field value
session_pgsql_reset — Reset connection to session database servers
session_pgsql_set_field — Set custom field value
session_pgsql_status — Get current save handler status
CXLIX. Sessions
session_cache_expire — Return current cache expire
session_cache_limiter — Get and/or set the current cache limiter
session_commit — Alias of session_write_close()
session_decode — Decodes session data from a string
session_destroy — Destroys all data registered to a session
session_encode — Encodes the current session data as a string
session_get_cookie_params — Get the session cookie parameters
session_id — Get and/or set the current session id
session_is_registered — Find out whether a global variable is registered in a session
session_module_name — Get and/or set the current session module
session_name — Get and/or set the current session name
session_regenerate_id — Update the current session id with a newly generated one
session_register — Register one or more global variables with the current session
session_save_path — Get and/or set the current session save path
session_set_cookie_params — Set the session cookie parameters
session_set_save_handler — Sets user-level session storage functions
session_start — Initialize session data
session_unregister — Unregister a global variable from the current session
session_unset — Free all session variables
session_write_close — Write session data and end session
CL. shmop
shmop_close — Close shared memory block
shmop_delete — Delete shared memory block
shmop_open — Create or open shared memory block
shmop_read — Read data from shared memory block
shmop_size — Get size of shared memory block
shmop_write — Write data into shared memory block
CLI. SimpleXML
SimpleXMLElement->addAttribute() — Adds an attribute to the SimpleXML element
SimpleXMLElement->addChild() — Adds a child element to the XML node
SimpleXMLElement->asXML() — Return a well-formed XML string based on SimpleXML element
SimpleXMLElement->attributes() — Identifies an element's attributes
SimpleXMLElement->children() — Finds children of given node
SimpleXMLElement->__construct() — Creates a new SimpleXMLElement object
SimpleXMLElement->getDocNamespaces() — Returns namespaces declared in document
SimpleXMLElement->getName() — Gets the name of the XML element
SimpleXMLElement->getNamespaces() — Returns namespaces used in document
SimpleXMLElement->registerXPathNamespace() — Creates a prefix/ns context for the next XPath query
SimpleXMLElement->xpath() — Runs XPath query on XML data
simplexml_import_dom — Get a SimpleXMLElement object from a DOM node.
simplexml_load_file — Interprets an XML file into an object
simplexml_load_string — Interprets a string of XML into an object
CLII. SNMP
snmp_get_quick_print — Fetches the current value of the UCD library's quick_print setting
snmp_get_valueretrieval — Return the method how the SNMP values will be returned
snmp_read_mib — Reads and parses a MIB file into the active MIB tree
snmp_set_enum_print — Return all values that are enums with their enum value instead of the raw integer
snmp_set_oid_numeric_print — Return all objects including their respective object id within the specified one
snmp_set_oid_output_format — Set the OID output format
snmp_set_quick_print — Set the value of quick_print within the UCD SNMP library
snmp_set_valueretrieval — Specify the method how the SNMP values will be returned
snmpget — Fetch an SNMP object
snmpgetnext — Fetch a SNMP object
snmprealwalk — Return all objects including their respective object ID within the specified one
snmpset — Set an SNMP object
snmpwalk — Fetch all the SNMP objects from an agent
snmpwalkoid — Query for a tree of information about a network entity
CLIII. SOAP
is_soap_fault — Checks if SOAP call was failed
SoapClient->__call() — Calls a SOAP function (deprecated)
SoapClient->__construct() — SoapClient constructor
SoapClient->__doRequest() — Performs a SOAP request
SoapClient->__getFunctions() — Returns list of SOAP functions
SoapClient->__getLastRequest() — Returns last SOAP request
SoapClient->__getLastRequestHeaders() — Returns last SOAP request headers
SoapClient->__getLastResponse() — Returns last SOAP response.
SoapClient->__getLastResponseHeaders() — Returns last SOAP response headers.
SoapClient->__getTypes() — Returns list of SOAP types
SoapClient->__setCookie() — Sets the cookie that will be sent with the SOAP request
SoapClient->__soapCall() — Calls a SOAP function
SoapFault->__construct() — SoapFault constructor
SoapHeader->__construct() — SoapHeader constructor
SoapParam->__construct() — SoapParam constructor
SoapServer->addFunction() — Adds one or several functions those will handle SOAP requests
SoapServer->__construct() — SoapServer constructor
SoapServer->fault() — Issue SoapServer fault indicating an error
SoapServer->getFunctions() — Returns list of defined functions
SoapServer->handle() — Handles a SOAP request
SoapServer->setClass() — Sets class which will handle SOAP requests
SoapServer->setPersistence() — Sets persistence mode of SoapServer
SoapVar->__construct() — SoapVar constructor
use_soap_error_handler — Set whether to use the SOAP error handler and return the former value
CLIV. Sockets
socket_accept — Accepts a connection on a socket
socket_bind — Binds a name to a socket
socket_clear_error — Clears the error on the socket or the last error code
socket_close — Closes a socket resource
socket_connect — Initiates a connection on a socket
socket_create_listen — Opens a socket on port to accept connections
socket_create_pair — Creates a pair of indistinguishable sockets and stores them in an array
socket_create — Create a socket (endpoint for communication)
socket_get_option — Gets socket options for the socket
socket_getpeername — Queries the remote side of the given socket which may either result in host/port or in a Unix filesystem path, dependent on its type
socket_getsockname — Queries the local side of the given socket which may either result in host/port or in a Unix filesystem path, dependent on its type
socket_last_error — Returns the last error on the socket
socket_listen — Listens for a connection on a socket
socket_read — Reads a maximum of length bytes from a socket
socket_recv — Receives data from a connected socket
socket_recvfrom — Receives data from a socket whether or not it is connection-oriented
socket_select — Runs the select() system call on the given arrays of sockets with a specified timeout
socket_send — Sends data to a connected socket
socket_sendto — Sends a message to a socket, whether it is connected or not
socket_set_block — Sets blocking mode on a socket resource
socket_set_nonblock — Sets nonblocking mode for file descriptor fd
socket_set_option — Sets socket options for the socket
socket_shutdown — Shuts down a socket for receiving, sending, or both
socket_strerror — Return a string describing a socket error
socket_write — Write to a socket
CLV. spl
ArrayIterator::current — Return current array entry
ArrayIterator::key — Return current array key
ArrayIterator::next — Move to next entry
ArrayIterator::rewind — Rewind array back to the start
ArrayIterator::seek — Seek to position
ArrayIterator::valid — Check whether array contains more entries
ArrayObject::append — Appends the value
ArrayObject::__construct — Construct a new array object
ArrayObject::count — Return the number of elements in the Iterator
ArrayObject::getIterator — Create a new iterator from an ArrayObject instance
ArrayObject::offsetExists — Returns whether the requested $index exists
ArrayObject::offsetGet — Returns the value at the specified $index
ArrayObject::offsetSet — Sets the value at the specified $index to $newval
ArrayObject::offsetUnset — Unsets the value at the specified $index
CachingIterator::hasNext — Check whether the inner iterator has a valid next element
CachingIterator::next — Move the iterator forward
CachingIterator::rewind — Rewind the iterator
CachingIterator::__toString — Return the string representation of the current element
CachingIterator::valid — Check whether the current element is valid
CachingRecursiveIterator::getChildren — Return the inner iterator's children as a CachingRecursiveIterator
CachingRecursiveIterator::hasChildren — Check whether the current element of the inner iterator has children
DirectoryIterator::__construct — Constructs a new dir iterator from a path
DirectoryIterator::current — Return this (needed for Iterator interface)
DirectoryIterator::getATime — Get last access time of file
DirectoryIterator::getCTime — Get inode modification time of file
DirectoryIterator::getFilename — Return filename of current dir entry
DirectoryIterator::getGroup — Get file group
DirectoryIterator::getInode — Get file inode
DirectoryIterator::getMTime — Get last modification time of file
DirectoryIterator::getOwner — Get file owner
DirectoryIterator::getPath — Return directory path
DirectoryIterator::getPathname — Return path and filename of current dir entry
DirectoryIterator::getPerms — Get file permissions
DirectoryIterator::getSize — Get file size
DirectoryIterator::getType — Get file type
DirectoryIterator::isDir — Returns true if file is directory
DirectoryIterator::isDot — Returns true if current entry is '.' or '..'
DirectoryIterator::isExecutable — Returns true if file is executable
DirectoryIterator::isFile — Returns true if file is a regular file
DirectoryIterator::isLink — Returns true if file is symbolic link
DirectoryIterator::isReadable — Returns true if file can be read
DirectoryIterator::isWritable — Returns true if file can be written
DirectoryIterator::key — Return current dir entry
DirectoryIterator::next — Move to next entry
DirectoryIterator::rewind — Rewind dir back to the start
DirectoryIterator::valid — Check whether dir contains more entries
FilterIterator::current — Get the current element value
FilterIterator::getInnerIterator — Get the inner iterator
FilterIterator::key — Get the current key
FilterIterator::next — Move the iterator forward
FilterIterator::rewind — Rewind the iterator
FilterIterator::valid — Check whether the current element is valid
LimitIterator::getPosition — Return the current position
LimitIterator::next — Move the iterator forward
LimitIterator::rewind — Rewind the iterator to the specified starting offset
LimitIterator::seek — Seek to the given position
LimitIterator::valid — Check whether the current element is valid
ParentIterator::getChildren — Return the inner iterator's children contained in a ParentIterator
ParentIterator::hasChildren — Check whether the inner iterator's current element has children
ParentIterator::next — Move the iterator forward
ParentIterator::rewind — Rewind the iterator
RecursiveDirectoryIterator::getChildren — Returns an iterator for the current entry if it is a directory
RecursiveDirectoryIterator::hasChildren — Returns whether current entry is a directory and not '.' or '..'
RecursiveDirectoryIterator::key — Return path and filename of current dir entry
RecursiveDirectoryIterator::next — Move to next entry
RecursiveDirectoryIterator::rewind — Rewind dir back to the start
RecursiveIteratorIterator::current — Access the current element value
RecursiveIteratorIterator::getDepth — Get the current depth of the recursive iteration
RecursiveIteratorIterator::getSubIterator — The current active sub iterator
RecursiveIteratorIterator::key — Access the current key
RecursiveIteratorIterator::next — Move forward to the next element
RecursiveIteratorIterator::rewind — Rewind the iterator to the first element of the top level inner iterator
RecursiveIteratorIterator::valid — Check whether the current position is valid
SimpleXMLIterator::current — Return current SimpleXML entry
SimpleXMLIterator::getChildren — Returns an iterator for the current entry if it is a SimpleXML object
SimpleXMLIterator::hasChildren — Returns whether current entry is a SimpleXML object
SimpleXMLIterator::key — Return current SimpleXML key
SimpleXMLIterator::next — Move to next entry
SimpleXMLIterator::rewind — Rewind SimpleXML back to the start
SimpleXMLIterator::valid — Check whether SimpleXML contains more entries
class_implements — Return the interfaces which are implemented by the given class
class_parents — Return the parent classes of the given class
iterator_count — Count the elements in an iterator
iterator_to_array — Copy the iterator into an array
spl_autoload_call — Try all registered __autoload() function to load the requested class
spl_autoload_extensions — Register and return default file extensions for spl_autoload
spl_autoload_functions — Return all registered __autoload() functions
spl_autoload_register — Register given function as __autoload() implementation
spl_autoload_unregister — Unregister given function as __autoload() implementation
spl_autoload — Default implementation for __autoload()
spl_classes — Return available SPL classes
spl_object_hash — Return hash id for given object
CLVI. SQLite
sqlite_array_query — Execute a query against a given database and returns an array
sqlite_busy_timeout — Set busy timeout duration, or disable busy handlers
sqlite_changes — Returns the number of rows that were changed by the most recent SQL statement
sqlite_close — Closes an open SQLite database
sqlite_column — Fetches a column from the current row of a result set
sqlite_create_aggregate — Register an aggregating UDF for use in SQL statements
sqlite_create_function — Registers a "regular" User Defined Function for use in SQL statements
sqlite_current — Fetches the current row from a result set as an array
sqlite_error_string — Returns the textual description of an error code
sqlite_escape_string — Escapes a string for use as a query parameter
sqlite_exec — Executes a result-less query against a given database
sqlite_factory — Opens a SQLite database and returns a SQLiteDatabase object
sqlite_fetch_all — Fetches all rows from a result set as an array of arrays
sqlite_fetch_array — Fetches the next row from a result set as an array
sqlite_fetch_column_types — Return an array of column types from a particular table
sqlite_fetch_object — Fetches the next row from a result set as an object
sqlite_fetch_single — Fetches the first column of a result set as a string
sqlite_fetch_string — Alias of sqlite_fetch_single()
sqlite_field_name — Returns the name of a particular field
sqlite_has_more — Finds whether or not more rows are available
sqlite_has_prev — Returns whether or not a previous row is available
sqlite_key — Returns the current row index
sqlite_last_error — Returns the error code of the last error for a database
sqlite_last_insert_rowid — Returns the rowid of the most recently inserted row
sqlite_libencoding — Returns the encoding of the linked SQLite library
sqlite_libversion — Returns the version of the linked SQLite library
sqlite_next — Seek to the next row number
sqlite_num_fields — Returns the number of fields in a result set
sqlite_num_rows — Returns the number of rows in a buffered result set
sqlite_open — Opens a SQLite database and create the database if it does not exist
sqlite_popen — Opens a persistent handle to an SQLite database and create the database if it does not exist
sqlite_prev — Seek to the previous row number of a result set
sqlite_query — Executes a query against a given database and returns a result handle
sqlite_rewind — Seek to the first row number
sqlite_seek — Seek to a particular row number of a buffered result set
sqlite_single_query — Executes a query and returns either an array for one single column or the value of the first row
sqlite_udf_decode_binary — Decode binary data passed as parameters to an UDF
sqlite_udf_encode_binary — Encode binary data before returning it from an UDF
sqlite_unbuffered_query — Execute a query that does not prefetch and buffer all data
sqlite_valid — Returns whether more rows are available
CLVII. SQLite (PDO)
PDO_SQLITE DSN — Connecting to SQLite databases
PDO->sqliteCreateAggregate() — Registers an aggregating User Defined Function for use in SQL statements
PDO->sqliteCreateFunction() — Registers a User Defined Function for use in SQL statements
CLVIII. ssh2
ssh2_auth_hostbased_file — Authenticate using a public hostkey
ssh2_auth_none — Authenticate as "none"
ssh2_auth_password — Authenticate over SSH using a plain password
ssh2_auth_pubkey_file — Authenticate using a public key
ssh2_connect — Connect to an SSH server
ssh2_exec — Execute a command on a remote server
ssh2_fetch_stream — Fetch an extended data stream
ssh2_fingerprint — Retreive fingerprint of remote server
ssh2_methods_negotiated — Return list of negotiated methods
ssh2_publickey_add — Add an authorized publickey
ssh2_publickey_init — Initialize Publickey subsystem
ssh2_publickey_list — List currently authorized publickeys
ssh2_publickey_remove — Remove an authorized publickey
ssh2_scp_recv — Request a file via SCP
ssh2_scp_send — Send a file via SCP
ssh2_sftp_lstat — Stat a symbolic link
ssh2_sftp_mkdir — Create a directory
ssh2_sftp_readlink — Return the target of a symbolic link
ssh2_sftp_realpath — Resolve the realpath of a provided path string
ssh2_sftp_rename — Rename a remote file
ssh2_sftp_rmdir — Remove a directory
ssh2_sftp_stat — Stat a file on a remote filesystem
ssh2_sftp_symlink — Create a symlink
ssh2_sftp_unlink — Delete a file
ssh2_sftp — Initialize SFTP subsystem
ssh2_shell — Request an interactive shell
ssh2_tunnel — Open a tunnel through a remote server
CLIX. Statistics
stats_absolute_deviation — Returns the absolute deviation of an array of values
stats_cdf_beta — CDF function for BETA Distribution. Calculates any one parameter of the beta distribution given values for the others.
stats_cdf_binomial — Calculates any one parameter of the binomial distribution given values for the others.
stats_cdf_cauchy — Not documented
stats_cdf_chisquare — Calculates any one parameter of the chi-square distribution given values for the others.
stats_cdf_exponential — Not documented
stats_cdf_f — Calculates any one parameter of the F distribution given values for the others.
stats_cdf_gamma — Calculates any one parameter of the gamma distribution given values for the others.
stats_cdf_laplace — Not documented
stats_cdf_logistic — Not documented
stats_cdf_negative_binomial — Calculates any one parameter of the negative binomial distribution given values for the others.
stats_cdf_noncentral_chisquare — Calculates any one parameter of the non-central chi-square distribution given values for the others.
stats_cdf_noncentral_f — Calculates any one parameter of the Non-central F distribution given values for the others.
stats_cdf_poisson — Calculates any one parameter of the Poisson distribution given values for the others.
stats_cdf_t — Calculates any one parameter of the T distribution given values for the others.
stats_cdf_uniform — Not documented
stats_cdf_weibull — Not documented
stats_covariance — Computes the covariance of two data sets
stats_den_uniform — Not documented
stats_dens_beta — Not documented
stats_dens_cauchy — Not documented
stats_dens_chisquare — Not documented
stats_dens_exponential — Not documented
stats_dens_f
stats_dens_gamma — Not documented
stats_dens_laplace — Not documented
stats_dens_logistic — Not documented
stats_dens_negative_binomial — Not documented
stats_dens_normal — Not documented
stats_dens_pmf_binomial — Not documented
stats_dens_pmf_hypergeometric
stats_dens_pmf_poisson — Not documented
stats_dens_t — Not documented
stats_dens_weibull — Not documented
stats_harmonic_mean — Returns the harmonic mean of an array of values
stats_kurtosis — Computes the kurtosis of the data in the array
stats_rand_gen_beta — Generates beta random deviate
stats_rand_gen_chisquare — Generates random deviate from the distribution of a chisquare with "df" degrees of freedom random variable.
stats_rand_gen_exponential — Generates a single random deviate from an exponential distribution with mean "av"
stats_rand_gen_f — Generates a random deviate
stats_rand_gen_funiform — Generates uniform float between low (exclusive) and high (exclusive)
stats_rand_gen_gamma — Generates random deviates from a gamma distribution
stats_rand_gen_ibinomial_negative — Generates a single random deviate from a negative binomial distribution. Arguments : n - the number of trials in the negative binomial distribution from which a random deviate is to be generated (n > 0), p - the probability of an event (0 < p < 1)).
stats_rand_gen_ibinomial — Generates a single random deviate from a binomial distribution whose number of trials is "n" (n >= 0) and whose probability of an event in each trial is "pp" ([0;1]). Method : algorithm BTPE
stats_rand_gen_int — Generates random integer between 1 and 2147483562
stats_rand_gen_ipoisson — Generates a single random deviate from a Poisson distribution with mean "mu" (mu >= 0.0).
stats_rand_gen_iuniform — Generates integer uniformly distributed between LOW (inclusive) and HIGH (inclusive)
stats_rand_gen_noncenral_chisquare — Generates random deviate from the distribution of a noncentral chisquare with "df" degrees of freedom and noncentrality parameter "xnonc". d must be >= 1.0, xnonc must >= 0.0
stats_rand_gen_noncentral_f — Generates a random deviate from the noncentral F (variance ratio) distribution with "dfn" degrees of freedom in the numerator, and "dfd" degrees of freedom in the denominator, and noncentrality parameter "xnonc". Method : directly generates ratio of noncentral numerator chisquare variate to central denominator chisquare variate.
stats_rand_gen_noncentral_t — Generates a single random deviate from a noncentral T distribution
stats_rand_gen_normal — Generates a single random deviate from a normal distribution with mean, av, and standard deviation, sd (sd >= 0). Method : Renames SNORM from TOMS as slightly modified by BWB to use RANF instead of SUNIF.
stats_rand_gen_t — Generates a single random deviate from a T distribution
stats_rand_get_seeds — Not documented
stats_rand_phrase_to_seeds — generate two seeds for the RGN random number generator
stats_rand_ranf — Returns a random floating point number from a uniform distribution over 0 - 1 (endpoints of this interval are not returned) using the current generator
stats_rand_setall — Not documented
stats_skew — Computes the skewness of the data in the array
stats_standard_deviation — Returns the standard deviation
stats_stat_binomial_coef — Not documented
stats_stat_correlation — Not documented
stats_stat_gennch — Not documented
stats_stat_independent_t — Not documented
stats_stat_innerproduct
stats_stat_noncentral_t — Calculates any one parameter of the noncentral t distribution give values for the others.
stats_stat_paired_t — Not documented
stats_stat_percentile — Not documented
stats_stat_powersum — Not documented
stats_variance — Returns the population variance
CLX. Streams
stream_bucket_append — Append bucket to brigade
stream_bucket_make_writeable — Return a bucket object from the brigade for operating on
stream_bucket_new — Create a new bucket for use on the current stream
stream_bucket_prepend — Prepend bucket to brigade
stream_context_create — Create a streams context
stream_context_get_default — Retreive the default streams context
stream_context_get_options — Retrieve options for a stream/wrapper/context
stream_context_set_option — Sets an option for a stream/wrapper/context
stream_context_set_params — Set parameters for a stream/wrapper/context
stream_copy_to_stream — Copies data from one stream to another
stream_encoding — Set character set for stream encoding
stream_filter_append — Attach a filter to a stream
stream_filter_prepend — Attach a filter to a stream
stream_filter_register — Register a stream filter implemented as a PHP class derived from php_user_filter
stream_filter_remove — Remove a filter from a stream
stream_get_contents — Reads remainder of a stream into a string
stream_get_filters — Retrieve list of registered filters
stream_get_line — Gets line from stream resource up to a given delimiter
stream_get_meta_data — Retrieves header/meta data from streams/file pointers
stream_get_transports — Retrieve list of registered socket transports
stream_get_wrappers — Retrieve list of registered streams
stream_register_wrapper — Alias of stream_wrapper_register()
stream_resolve_include_path — Determine what file will be opened by calls to fopen() with a relative path
stream_select — Runs the equivalent of the select() system call on the given arrays of streams with a timeout specified by tv_sec and tv_usec
stream_set_blocking — Set blocking/non-blocking mode on a stream
stream_set_timeout — Set timeout period on a stream
stream_set_write_buffer — Sets file buffering on the given stream
stream_socket_accept — Accept a connection on a socket created by stream_socket_server()
stream_socket_client — Open Internet or Unix domain socket connection
stream_socket_enable_crypto — Turns encryption on/off on an already connected socket
stream_socket_get_name — Retrieve the name of the local or remote sockets
stream_socket_pair — Creates a pair of connected, indistinguishable socket streams
stream_socket_recvfrom — Receives data from a socket, connected or not
stream_socket_sendto — Sends a message to a socket, whether it is connected or not
stream_socket_server — Create an Internet or Unix domain server socket
stream_socket_shutdown — Shutdown a full-duplex connection
stream_wrapper_register — Register a URL wrapper implemented as a PHP class
stream_wrapper_restore — Restores a previously unregistered built-in wrapper
stream_wrapper_unregister — Unregister a URL wrapper
CLXI. Strings
addcslashes — Quote string with slashes in a C style
addslashes — Quote string with slashes
bin2hex — Convert binary data into hexadecimal representation
chop — Alias of rtrim()
chr — Return a specific character
chunk_split — Split a string into smaller chunks
convert_cyr_string — Convert from one Cyrillic character set to another
convert_uudecode — Decode a uuencoded string
convert_uuencode — Uuencode a string
count_chars — Return information about characters used in a string
crc32 — Calculates the crc32 polynomial of a string
crypt — One-way string encryption (hashing)
echo — Output one or more strings
explode — Split a string by string
fprintf — Write a formatted string to a stream
get_html_translation_table — Returns the translation table used by htmlspecialchars() and htmlentities()
hebrev — Convert logical Hebrew text to visual text
hebrevc — Convert logical Hebrew text to visual text with newline conversion
html_entity_decode — Convert all HTML entities to their applicable characters
htmlentities — Convert all applicable characters to HTML entities
htmlspecialchars_decode — Convert special HTML entities back to characters
htmlspecialchars — Convert special characters to HTML entities
implode — Join array elements with a string
join — Alias of implode()
levenshtein — Calculate Levenshtein distance between two strings
localeconv — Get numeric formatting information
ltrim — Strip whitespace (or other characters) from the beginning of a string
md5_file — Calculates the md5 hash of a given file
md5 — Calculate the md5 hash of a string
metaphone — Calculate the metaphone key of a string
money_format — Formats a number as a currency string
nl_langinfo — Query language and locale information
nl2br — Inserts HTML line breaks before all newlines in a string
number_format — Format a number with grouped thousands
ord — Return ASCII value of character
parse_str — Parses the string into variables
print — Output a string
printf — Output a formatted string
quoted_printable_decode — Convert a quoted-printable string to an 8 bit string
quotemeta — Quote meta characters
rtrim — Strip whitespace (or other characters) from the end of a string
setlocale — Set locale information
sha1_file — Calculate the sha1 hash of a file
sha1 — Calculate the sha1 hash of a string
similar_text — Calculate the similarity between two strings
soundex — Calculate the soundex key of a string
sprintf — Return a formatted string
sscanf — Parses input from a string according to a format
str_getcsv — Parse a CSV string into an array
str_ireplace — Case-insensitive version of str_replace().
str_pad — Pad a string to a certain length with another string
str_repeat — Repeat a string
str_replace — Replace all occurrences of the search string with the replacement string
str_rot13 — Perform the rot13 transform on a string
str_shuffle — Randomly shuffles a string
str_split — Convert a string to an array
str_word_count — Return information about words used in a string
strcasecmp — Binary safe case-insensitive string comparison
strchr — Alias of strstr()
strcmp — Binary safe string comparison
strcoll — Locale based string comparison
strcspn — Find length of initial segment not matching mask
strip_tags — Strip HTML and PHP tags from a string
stripcslashes — Un-quote string quoted with addcslashes()
stripos — Find position of first occurrence of a case-insensitive string
stripslashes — Un-quote string quoted with addslashes()
stristr — Case-insensitive strstr()
strlen — Get string length
strnatcasecmp — Case insensitive string comparisons using a "natural order" algorithm
strnatcmp — String comparisons using a "natural order" algorithm
strncasecmp — Binary safe case-insensitive string comparison of the first n characters
strncmp — Binary safe string comparison of the first n characters
strpbrk — Search a string for any of a set of characters
strpos — Find position of first occurrence of a string
strrchr — Find the last occurrence of a character in a string
strrev — Reverse a string
strripos — Find position of last occurrence of a case-insensitive string in a string
strrpos — Find position of last occurrence of a char in a string
strspn — Find length of initial segment matching mask
strstr — Find first occurrence of a string
strtok — Tokenize string
strtolower — Make a string lowercase
strtoupper — Make a string uppercase
strtr — Translate certain characters
substr_compare — Binary safe comparison of 2 strings from an offset, up to length characters
substr_count — Count the number of substring occurrences
substr_replace — Replace text within a portion of a string
substr — Return part of a string
trim — Strip whitespace (or other characters) from the beginning and end of a string
ucfirst — Make a string's first character uppercase
ucwords — Uppercase the first character of each word in a string
vfprintf — Write a formatted string to a stream
vprintf — Output a formatted string
vsprintf — Return a formatted string
wordwrap — Wraps a string to a given number of characters
CLXII. SVN
svn_add — Schedules the addition of an item in a working directory
svn_auth_get_parameter — Retrieves authentication parameter
svn_auth_set_parameter — Sets an authentication parameter
svn_cat — Returns the contents of a file in a repository
svn_checkout — Checks out a working copy from the repository
svn_cleanup — Recursively cleanup a working copy directory, finishing incomplete operations and removing locks
svn_client_version — Returns the version of the SVN client libraries
svn_commit — Sends changes from the local working copy to the repository
svn_diff — Recursively diffs two paths
svn_fs_abort_txn — Abort a transaction, returns true if everything is ok, false othewise
svn_fs_apply_text — Creates and returns a stream that will be used to replace
svn_fs_begin_txn2 — Create a new transaction
svn_fs_change_node_prop — Return true if everything is ok, false otherwise
svn_fs_check_path — Determines what kind of item lives at path in a given repository fsroot
svn_fs_contents_changed — Return true if content is different, false otherwise
svn_fs_copy — Copies a file or a directory, returns true if all is ok, false otherwise
svn_fs_delete — Deletes a file or a directory, return true if all is ok, false otherwise
svn_fs_dir_entries — Enumerates the directory entries under path; returns a hash of dir names to file type
svn_fs_file_contents — Returns a stream to access the contents of a file from a given version of the fs
svn_fs_file_length — Returns the length of a file from a given version of the fs
svn_fs_is_dir — Return true if the path points to a directory, false otherwise
svn_fs_is_file — Return true if the path points to a file, false otherwise
svn_fs_make_dir — Creates a new empty directory, returns true if all is ok, false otherwise
svn_fs_make_file — Creates a new empty file, returns true if all is ok, false otherwise
svn_fs_node_created_rev — Returns the revision in which path under fsroot was created
svn_fs_node_prop — Returns the value of a property for a node
svn_fs_props_changed — Return true if props are different, false otherwise
svn_fs_revision_prop — Fetches the value of a named property
svn_fs_revision_root — Get a handle on a specific version of the repository root
svn_fs_txn_root — Creates and returns a transaction root
svn_fs_youngest_rev — Returns the number of the youngest revision in the filesystem
svn_import — Imports an unversioned path into a repository
svn_log — Returns the commit log messages of a repository URL
svn_ls — Returns list of directory contents in repository URL, optionally at revision number
svn_repos_create — Create a new subversion repository at path
svn_repos_fs_begin_txn_for_commit — Create a new transaction
svn_repos_fs_commit_txn — Commits a transaction and returns the new revision
svn_repos_fs — Gets a handle on the filesystem for a repository
svn_repos_hotcopy — Make a hot-copy of the repos at repospath; copy it to destpath
svn_repos_open — Open a shared lock on a repository.
svn_repos_recover — Run recovery procedures on the repository located at path.
svn_status — Returns the status of working copy files and directories
svn_update — Update working copy
CLXIII. SWF
swf_actiongeturl — Get a URL from a Shockwave Flash movie
swf_actiongotoframe — Play a frame and then stop
swf_actiongotolabel — Display a frame with the specified label
swf_actionnextframe — Go forward one frame
swf_actionplay — Start playing the flash movie from the current frame
swf_actionprevframe — Go backwards one frame
swf_actionsettarget — Set the context for actions
swf_actionstop — Stop playing the flash movie at the current frame
swf_actiontogglequality — Toggle between low and high quality
swf_actionwaitforframe — Skip actions if a frame has not been loaded
swf_addbuttonrecord — Controls location, appearance and active area of the current button
swf_addcolor — Set the global add color to the rgba value specified
swf_closefile — Close the current Shockwave Flash file
swf_definebitmap — Define a bitmap
swf_definefont — Defines a font
swf_defineline — Define a line
swf_definepoly — Define a polygon
swf_definerect — Define a rectangle
swf_definetext — Define a text string
swf_endbutton — End the definition of the current button
swf_enddoaction — End the current action
swf_endshape — Completes the definition of the current shape
swf_endsymbol — End the definition of a symbol
swf_fontsize — Change the font size
swf_fontslant — Set the font slant
swf_fonttracking — Set the current font tracking
swf_getbitmapinfo — Get information about a bitmap
swf_getfontinfo — Gets font information
swf_getframe — Get the frame number of the current frame
swf_labelframe — Label the current frame
swf_lookat — Define a viewing transformation
swf_modifyobject — Modify an object
swf_mulcolor — Sets the global multiply color to the rgba value specified
swf_nextid — Returns the next free object id
swf_oncondition — Describe a transition used to trigger an action list
swf_openfile — Open a new Shockwave Flash file
swf_ortho2 — Defines 2D orthographic mapping of user coordinates onto the current viewport
swf_ortho — Defines an orthographic mapping of user coordinates onto the current viewport
swf_perspective — Define a perspective projection transformation
swf_placeobject — Place an object onto the screen
swf_polarview — Define the viewer's position with polar coordinates
swf_popmatrix — Restore a previous transformation matrix
swf_posround — Enables or Disables the rounding of the translation when objects are placed or moved
swf_pushmatrix — Push the current transformation matrix back unto the stack
swf_removeobject — Remove an object
swf_rotate — Rotate the current transformation
swf_scale — Scale the current transformation
swf_setfont — Change the current font
swf_setframe — Switch to a specified frame
swf_shapearc — Draw a circular arc
swf_shapecurveto3 — Draw a cubic bezier curve
swf_shapecurveto — Draw a quadratic bezier curve between two points
swf_shapefillbitmapclip — Set current fill mode to clipped bitmap
swf_shapefillbitmaptile — Set current fill mode to tiled bitmap
swf_shapefilloff — Turns off filling
swf_shapefillsolid — Set the current fill style to the specified color
swf_shapelinesolid — Set the current line style
swf_shapelineto — Draw a line
swf_shapemoveto — Move the current position
swf_showframe — Display the current frame
swf_startbutton — Start the definition of a button
swf_startdoaction — Start a description of an action list for the current frame
swf_startshape — Start a complex shape
swf_startsymbol — Define a symbol
swf_textwidth — Get the width of a string
swf_translate — Translate the current transformations
swf_viewport — Select an area for future drawing
CLXIV. swish
Swish::__construct — Construct a Swish object
Swish->getMetaList — Get the list of meta entries for the index
Swish->getPropertyList — Get the list of properties for the index
Swish->prepare — Prepare a search query
Swish->query — Execute a query and return results object
SwishResult->getMetaList — Get a list of meta entries
SwishResult->stem — Stems the given word
SwishResults->getParsedWords — Get an array of parsed words
SwishResults->getRemovedStopwords — Get an array of stopwords removed from the query
SwishResults->nextResult — Get the next search result
SwishResults->seekResult — Set current seek pointer to the given position
SwishSearch->execute — Execute the search and get the results
SwishSearch->resetLimit — Reset the search limits
SwishSearch->setLimit — Set the search limits
SwishSearch->setPhraseDelimiter — Set the phrase delimiter
SwishSearch->setSort — Set the sort order
SwishSearch->setStructure — Set the structure flag in the search object
CLXV. Sybase
sybase_affected_rows — Gets number of affected rows in last query
sybase_close — Closes a Sybase connection
sybase_connect — Opens a Sybase server connection
sybase_data_seek — Moves internal row pointer
sybase_deadlock_retry_count — Sets the deadlock retry count
sybase_fetch_array — Fetch row as array
sybase_fetch_assoc — Fetch a result row as an associative array
sybase_fetch_field — Get field information from a result
sybase_fetch_object — Fetch a row as an object
sybase_fetch_row — Get a result row as an enumerated array
sybase_field_seek — Sets field offset
sybase_free_result — Frees result memory
sybase_get_last_message — Returns the last message from the server
sybase_min_client_severity — Sets minimum client severity
sybase_min_error_severity — Sets minimum error severity
sybase_min_message_severity — Sets minimum message severity
sybase_min_server_severity — Sets minimum server severity
sybase_num_fields — Gets the number of fields in a result set
sybase_num_rows — Get number of rows in a result set
sybase_pconnect — Open persistent Sybase connection
sybase_query — Sends a Sybase query
sybase_result — Get result data
sybase_select_db — Selects a Sybase database
sybase_set_message_handler — Sets the handler called when a server message is raised
sybase_unbuffered_query — Send a Sybase query and do not block
CLXVI. TCP Wrappers
tcpwrap_check — Performs a tcpwrap check
CLXVII. tidy
ob_tidyhandler — ob_start callback function to repair the buffer
tidy_access_count — Returns the Number of Tidy accessibility warnings encountered for specified document
tidy_clean_repair — Execute configured cleanup and repair operations on parsed markup
tidy_config_count — Returns the Number of Tidy configuration errors encountered for specified document
tidy::__construct — Constructs a new tidy object
tidy_diagnose — Run configured diagnostics on parsed and repaired markup
tidy_error_count — Returns the Number of Tidy errors encountered for specified document
tidy_get_body — Returns a tidyNode Object starting from the <body> tag of the tidy parse tree
tidy_get_config — Get current Tidy configuration
tidy_get_error_buffer — Return warnings and errors which occurred parsing the specified document
tidy_get_head — Returns a tidyNode Object starting from the <head> tag of the tidy parse tree
tidy_get_html_ver — Get the Detected HTML version for the specified document
tidy_get_html — Returns a tidyNode Object starting from the <html> tag of the tidy parse tree
tidy_get_opt_doc — Returns the documentation for the given option name
tidy_get_output — Return a string representing the parsed tidy markup
tidy_get_release — Get release date (version) for Tidy library
tidy_get_root — Returns a tidyNode object representing the root of the tidy parse tree
tidy_get_status — Get status of specified document
tidy_getopt — Returns the value of the specified configuration option for the tidy document
tidy_is_xhtml — Indicates if the document is a XHTML document
tidy_is_xml — Indicates if the document is a generic (non HTML/XHTML) XML document
tidy_load_config — Load an ASCII Tidy configuration file with the specified encoding
tidy_node->get_attr — Return the attribute with the provided attribute id
tidy_node->get_nodes — Return an array of nodes under this node with the specified id
tidy_node->next — Returns the next sibling to this node
tidy_node->prev — Returns the previous sibling to this node
tidy_parse_file — Parse markup in file or URI
tidy_parse_string — Parse a document stored in a string
tidy_repair_file — Repair a file and return it as a string
tidy_repair_string — Repair a string using an optionally provided configuration file
tidy_reset_config — Restore Tidy configuration to default values
tidy_save_config — Save current settings to named file
tidy_set_encoding — Set the input/output character encoding for parsing markup
tidy_setopt — Updates the configuration settings for the specified tidy document
tidy_warning_count — Returns the Number of Tidy warnings encountered for specified document
tidyNode->hasChildren — Returns true if this node has children
tidyNode->hasSiblings — Returns true if this node has siblings
tidyNode->isAsp — Returns true if this node is ASP
tidyNode->isComment — Returns true if this node represents a comment
tidyNode->isHtml — Returns true if this node is part of a HTML document
tidyNode->isJste — Returns true if this node is JSTE
tidyNode->isPhp — Returns true if this node is PHP
tidyNode->isText — Returns true if this node represents text (no markup)
tidyNode::getParent — returns the parent node of the current node
CLXVIII. Tokenizer
token_get_all — Split given source into PHP tokens
token_name — Get the symbolic name of a given PHP token
CLXIX. Unicode
unicode_decode — Convert a binary string into a Unicode string
unicode_encode — Convert a unicode string in any encoding
unicode_get_error_mode — Get the error mode for strings conversions
unicode_get_subst_char — Get the substitution character for string conversion errors
unicode_semantics — Check whether unicode semantics is enabled
unicode_set_error_mode — Set the error mode for strings conversions
unicode_set_subst_char — Set the substitution character for string conversion errors
CLXX. URLs
base64_decode — Decodes data encoded with MIME base64
base64_encode — Encodes data with MIME base64
get_headers — Fetches all the headers sent by the server in response to a HTTP request
get_meta_tags — Extracts all meta tag content attributes from a file and returns an array
http_build_query — Generate URL-encoded query string
parse_url — Parse a URL and return its components
rawurldecode — Decode URL-encoded strings
rawurlencode — URL-encode according to RFC 1738
urldecode — Decodes URL-encoded string
urlencode — URL-encodes string
CLXXI. Variables handling
debug_zval_dump — Dumps a string representation of an internal zend value to output
doubleval — Alias of floatval()
empty — Determine whether a variable is empty
floatval — Get float value of a variable
get_defined_vars — Returns an array of all defined variables
get_resource_type — Returns the resource type
gettype — Get the type of a variable
import_request_variables — Import GET/POST/Cookie variables into the global scope
intval — Get the integer value of a variable
is_array — Finds whether a variable is an array
is_binary — Finds whether a variable is a native binary string
is_bool — Finds out whether a variable is a boolean
is_buffer — Finds whether a variable is a native unicode or binary string
is_callable — Verify that the contents of a variable can be called as a function
is_double — Alias of is_float()
is_float — Finds whether the type of a variable is float
is_int — Find whether the type of a variable is integer
is_integer — Alias of is_int()
is_long — Alias of is_int()
is_null — Finds whether a variable is NULL
is_numeric — Finds whether a variable is a number or a numeric string
is_object — Finds whether a variable is an object
is_real — Alias of is_float()
is_resource — Finds whether a variable is a resource
is_scalar — Finds whether a variable is a scalar
is_string — Find whether the type of a variable is string
is_unicode — Finds whether a variable is a unicode string
isset — Determine whether a variable is set
print_r — Prints human-readable information about a variable
serialize — Generates a storable representation of a value
settype — Set the type of a variable
strval — Get string value of a variable
unserialize — Creates a PHP value from a stored representation
unset — Unset a given variable
var_dump — Dumps information about a variable
var_export — Outputs or returns a parsable string representation of a variable
CLXXII. Verisign Payflow Pro
pfpro_cleanup — Shuts down the Payflow Pro library
pfpro_init — Initialises the Payflow Pro library
pfpro_process_raw — Process a raw transaction with Payflow Pro
pfpro_process — Process a transaction with Payflow Pro
pfpro_version — Returns the version of the Payflow Pro software
CLXXIII. vpopmail
vpopmail_add_alias_domain_ex — Add alias to an existing virtual domain
vpopmail_add_alias_domain — Add an alias for a virtual domain
vpopmail_add_domain_ex — Add a new virtual domain
vpopmail_add_domain — Add a new virtual domain
vpopmail_add_user — Add a new user to the specified virtual domain
vpopmail_alias_add — Insert a virtual alias
vpopmail_alias_del_domain — Deletes all virtual aliases of a domain
vpopmail_alias_del — Deletes all virtual aliases of a user
vpopmail_alias_get_all — Get all lines of an alias for a domain
vpopmail_alias_get — Get all lines of an alias for a domain
vpopmail_auth_user — Attempt to validate a username/domain/password
vpopmail_del_domain_ex — Delete a virtual domain
vpopmail_del_domain — Delete a virtual domain
vpopmail_del_user — Delete a user from a virtual domain
vpopmail_error — Get text message for last vpopmail error
vpopmail_passwd — Change a virtual user's password
vpopmail_set_user_quota — Sets a virtual user's quota
CLXXIV. W32api
w32api_deftype — Defines a type for use with other w32api_functions
w32api_init_dtype — Creates an instance of the data type typename and fills it with the values passed
w32api_invoke_function — Invokes function funcname with the arguments passed after the function name
w32api_register_function — Registers function function_name from library with PHP
w32api_set_call_method — Sets the calling method used
CLXXV. WDDX
wddx_add_vars — Add variables to a WDDX packet with the specified ID
wddx_deserialize — Alias of wddx_unserialize()
wddx_packet_end — Ends a WDDX packet with the specified ID
wddx_packet_start — Starts a new WDDX packet with structure inside it
wddx_serialize_value — Serialize a single value into a WDDX packet
wddx_serialize_vars — Serialize variables into a WDDX packet
wddx_unserialize — Unserializes a WDDX packet
CLXXVI. win32ps
win32_ps_list_procs — List running processes
win32_ps_stat_mem — Stat memory utilization
win32_ps_stat_proc — Stat process
CLXXVII. win32service
win32_create_service — Creates a new service entry in the SCM database
win32_delete_service — Deletes a service entry from the SCM database
win32_get_last_control_message — Returns the last control message that was sent to this service
win32_query_service_status — Queries the status of a service
win32_set_service_status — Update the service status
win32_start_service_ctrl_dispatcher — Registers the script with the SCM, so that it can act as the service with the given name
win32_start_service — Starts a service
win32_stop_service — Stops a service
CLXXVIII. xattr
xattr_get — Get an extended attribute
xattr_list — Get a list of extended attributes
xattr_remove — Remove an extended attribute
xattr_set — Set an extended attribute
xattr_supported — Check if filesystem supports extended attributes
CLXXIX. xdiff
xdiff_file_diff_binary — Make binary diff of two files
xdiff_file_diff — Make unified diff of two files
xdiff_file_merge3 — Merge 3 files into one
xdiff_file_patch_binary — Patch a file with a binary diff
xdiff_file_patch — Patch a file with an unified diff
xdiff_string_diff_binary — Make binary diff of two strings
xdiff_string_diff — Make unified diff of two strings
xdiff_string_merge3 — Merge 3 strings into one
xdiff_string_patch_binary — Patch a string with a binary diff
xdiff_string_patch — Patch a string with an unified diff
CLXXX. XML
utf8_decode — Converts a string with ISO-8859-1 characters encoded with UTF-8 to single-byte ISO-8859-1
utf8_encode — Encodes an ISO-8859-1 string to UTF-8
xml_error_string — Get XML parser error string
xml_get_current_byte_index — Get current byte index for an XML parser
xml_get_current_column_number — Get current column number for an XML parser
xml_get_current_line_number — Get current line number for an XML parser
xml_get_error_code — Get XML parser error code
xml_parse_into_struct — Parse XML data into an array structure
xml_parse — Start parsing an XML document
xml_parser_create_ns — Create an XML parser with namespace support
xml_parser_create — Create an XML parser
xml_parser_free — Free an XML parser
xml_parser_get_option — Get options from an XML parser
xml_parser_set_option — Set options in an XML parser
xml_set_character_data_handler — Set up character data handler
xml_set_default_handler — Set up default handler
xml_set_element_handler — Set up start and end element handlers
xml_set_end_namespace_decl_handler — Set up end namespace declaration handler
xml_set_external_entity_ref_handler — Set up external entity reference handler
xml_set_notation_decl_handler — Set up notation declaration handler
xml_set_object — Use XML Parser within an object
xml_set_processing_instruction_handler — Set up processing instruction (PI) handler
xml_set_start_namespace_decl_handler — Set up start namespace declaration handler
xml_set_unparsed_entity_decl_handler — Set up unparsed entity declaration handler
CLXXXI. XML-RPC
xmlrpc_decode_request — Decodes XML into native PHP types
xmlrpc_decode — Decodes XML into native PHP types
xmlrpc_encode_request — Generates XML for a method request
xmlrpc_encode — Generates XML for a PHP value
xmlrpc_get_type — Gets xmlrpc type for a PHP value
xmlrpc_is_fault — Determines if an array value represents an XMLRPC fault
xmlrpc_parse_method_descriptions — Decodes XML into a list of method descriptions
xmlrpc_server_add_introspection_data — Adds introspection documentation
xmlrpc_server_call_method — Parses XML requests and call methods
xmlrpc_server_create — Creates an xmlrpc server
xmlrpc_server_destroy — Destroys server resources
xmlrpc_server_register_introspection_callback — Register a PHP function to generate documentation
xmlrpc_server_register_method — Register a PHP function to resource method matching method_name
xmlrpc_set_type — Sets xmlrpc type, base64 or datetime, for a PHP string value
CLXXXII. XMLReader
XMLReader::close — Close the XMLReader input
XMLReader::expand — Returns a copy of the current node as a DOM object
XMLReader::getAttribute — Get the value of a named attribute
XMLReader::getAttributeNo — Get the value of an attribute by index
XMLReader::getAttributeNs — Get the value of an attribute by localname and URI
XMLReader::getParserProperty — Indicates if specified property has been set
XMLReader::isValid — Indicates if the parsed document is valid
XMLReader::lookupNamespace — Lookup namespace for a prefix
XMLReader::moveToAttribute — Move cursor to a named attribute
XMLReader::moveToAttributeNo — Move cursor to an attribute by index
XMLReader::moveToAttributeNs — Move cursor to a named attribute
XMLReader::moveToElement — Position cursor on the parent Element of current Attribute
XMLReader::moveToFirstAttribute — Position cursor on the first Attribute
XMLReader::moveToNextAttribute — Position cursor on the next Attribute
XMLReader::next — Move cursor to next node skipping all subtrees
XMLReader::open — Set the URI containing the XML to parse
XMLReader::read — Move to next node in document
XMLReader::setParserProperty — Set or Unset parser options
XMLReader::setRelaxNGSchema — Set the filename or URI for a RelaxNG Schema
XMLReader::setRelaxNGSchemaSource — Set the data containing a RelaxNG Schema
XMLReader::XML — Set the data containing the XML to parse
CLXXXIII. XMLWriter
XMLWriter::endAttribute — End attribute
XMLWriter::endCData — End current CDATA
XMLWriter::endComment — Create end comment
XMLWriter::endDocument — End current document
XMLWriter::endDTDAttlist — End current DTD AttList
XMLWriter::endDTDElement — End current DTD element
XMLWriter::endDTDEntity — End current DTD Entity
XMLWriter::endDTD — End current DTD
XMLWriter::endElement — End current element
XMLWriter::endPI — End current PI
XMLWriter::flush — Flush current buffer
XMLWriter::fullEndElement — End current element
XMLWriter::openMemory — Create new xmlwriter using memory for string output
XMLWriter::openURI — Create new xmlwriter using source uri for output
XMLWriter::outputMemory — Returns current buffer
XMLWriter::setIndentString — Set string used for indenting
XMLWriter::setIndent — Toggle indentation on/off
XMLWriter::startAttributeNS — Create start namespaced attribute
XMLWriter::startAttribute — Create start attribute
XMLWriter::startCData — Create start CDATA tag
XMLWriter::startComment — Create start comment
XMLWriter::startDocument — Create document tag
XMLWriter::startDTDAttlist — Create start DTD AttList
XMLWriter::startDTDElement — Create start DTD element
XMLWriter::startDTDEntity — Create start DTD Entity
XMLWriter::startDTD — Create start DTD tag
XMLWriter::startElementNS — Create start namespaced element tag
XMLWriter::startElement — Create start element tag
XMLWriter::startPI — Create start PI tag
XMLWriter::text — Write text
XMLWriter::writeAttributeNS — Write full namespaced attribute
XMLWriter::writeAttribute — Write full attribute
XMLWriter::writeCData — Write full CDATA tag
XMLWriter::writeComment — Write full comment tag
XMLWriter::writeDTDAttlist — Write full DTD AttList tag
XMLWriter::writeDTDElement — Write full DTD element tag
XMLWriter::writeDTDEntity — Write full DTD Entity tag
XMLWriter::writeDTD — Write full DTD tag
XMLWriter::writeElementNS — Write full namesapced element tag
XMLWriter::writeElement — Write full element tag
XMLWriter::writePI — Writes a PI
XMLWriter::writeRaw — Write a raw XML text
CLXXXIV. XSL
XSLTProcessor::__construct — Creates a new XSLTProcessor object
XSLTProcessor::getParameter — Get value of a parameter
XSLTProcessor::hasExsltSupport — Determine if PHP has EXSLT support
XSLTProcessor::importStylesheet — Import stylesheet
XSLTProcessor::registerPHPFunctions — Enables the ability to use PHP functions as XSLT functions
XSLTProcessor::removeParameter — Remove parameter
XSLTProcessor::setParameter — Set value for a parameter
XSLTProcessor::transformToDoc — Transform to a DOMDocument
XSLTProcessor::transformToURI — Transform to URI
XSLTProcessor::transformToXML — Transform to XML
CLXXXV. XSLT
xslt_backend_info — Returns the information on the compilation settings of the backend
xslt_backend_name — Returns the name of the backend
xslt_backend_version — Returns the version number of Sablotron
xslt_create — Create a new XSLT processor
xslt_errno — Returns an error number
xslt_error — Returns an error string
xslt_free — Free XSLT processor
xslt_getopt — Get options on a given xsl processor
xslt_process — Perform an XSLT transformation
xslt_set_base — Set the base URI for all XSLT transformations
xslt_set_encoding — Set the encoding for the parsing of XML documents
xslt_set_error_handler — Set an error handler for a XSLT processor
xslt_set_log — Set the log file to write log messages to
xslt_set_object — Sets the object in which to resolve callback functions
xslt_set_sax_handler — Set SAX handlers for a XSLT processor
xslt_set_sax_handlers — Set the SAX handlers to be called when the XML document gets processed
xslt_set_scheme_handler — Set Scheme handlers for a XSLT processor
xslt_set_scheme_handlers — Set the scheme handlers for the XSLT processor
xslt_setopt — Set options on a given xsl processor
CLXXXVI. YAZ
yaz_addinfo — Returns additional error information
yaz_ccl_conf — Configure CCL parser
yaz_ccl_parse — Invoke CCL Parser
yaz_close — Close YAZ connection
yaz_connect — Prepares for a connection to a Z39.50 server
yaz_database — Specifies the databases within a session
yaz_element — Specifies Element-Set Name for retrieval
yaz_errno — Returns error number
yaz_error — Returns error description
yaz_es_result — Inspects Extended Services Result
yaz_es — Prepares for an Extended Service Request
yaz_get_option — Returns value of option for connection
yaz_hits — Returns number of hits for last search
yaz_itemorder — Prepares for Z39.50 Item Order with an ILL-Request package
yaz_present — Prepares for retrieval (Z39.50 present)
yaz_range — Specifies a range of records to retrieve
yaz_record — Returns a record
yaz_scan_result — Returns Scan Response result
yaz_scan — Prepares for a scan
yaz_schema — Specifies schema for retrieval
yaz_search — Prepares for a search
yaz_set_option — Sets one or more options for connection
yaz_sort — Sets sorting criteria
yaz_syntax — Specifies the preferred record syntax for retrieval
yaz_wait — Wait for Z39.50 requests to complete
CLXXXVII. YP/NIS
yp_all — Traverse the map and call a function on each entry
yp_cat — Return an array containing the entire map
yp_err_string — Returns the error string associated with the given error code
yp_errno — Returns the error code of the previous operation
yp_first — Returns the first key-value pair from the named map
yp_get_default_domain — Fetches the machine's default NIS domain
yp_master — Returns the machine name of the master NIS server for a map
yp_match — Returns the matched line
yp_next — Returns the next key-value pair in the named map
yp_order — Returns the order number for a map
CLXXXVIII. Zip
zip_close — Close a ZIP file archive
zip_entry_close — Close a directory entry
zip_entry_compressedsize — Retrieve the compressed size of a directory entry
zip_entry_compressionmethod — Retrieve the compression method of a directory entry
zip_entry_filesize — Retrieve the actual file size of a directory entry
zip_entry_name — Retrieve the name of a directory entry
zip_entry_open — Open a directory entry for reading
zip_entry_read — Read from an open directory entry
zip_open — Open a ZIP file archive
zip_read — Read next entry in a ZIP file archive
ZipArchive::addEmptyDir — Add a new directory
ZipArchive::addFile — Adds a file to a ZIP archive from the given path
ZipArchive::addFromString — Add a file to a ZIP archive using its contents
ZipArchive::close — Close the active archive (opened or newly created)
ZipArchive::deleteIndex — delete an entry in the archive using its index
ZipArchive::deleteName — delete an entry in the archive using its name
ZipArchive::extractTo — Extract the archive contents
ZipArchive::getArchiveComment — Returns the Zip archive comment
ZipArchive::getCommentIndex — Returns the comment of an entry using the entry index
ZipArchive::getCommentName — Returns the comment of an entry using the entry name
ZipArchive::getFromIndex — Returns the entry contents using its index.
ZipArchive::getFromName — Returns the entry contents using its name.
ZipArchive::getNameIndex — Returns the name of an entry using its index
ZipArchive::getStream — Get a file handler to the entry defined by its name (read only).
ZipArchive::locateName — Returns the index of the entry in the archive
ZipArchive::open — Open a ZIP file archive
ZipArchive::renameIndex — Renames an entry defined by its index
ZipArchive::renameName — Renames an entry defined by its name
ZipArchive::setArchiveComment — Set the comment of a ZIP archive
ZipArchive::setCommentIndex — Set the comment of an entry defined by its index
ZipArchive::setCommentName — Set the comment of an entry defined by its name
ZipArchive::statIndex — Get the details of an entry defined by its index.
ZipArchive::statName — Get the details of an entry defined by its name.
ZipArchive::unchangeAll — Undo all changes done in the archive.
ZipArchive::unchangeArchive — Revert all global changes done in the archive.
ZipArchive::unchangeIndex — Revert all changes done to an entry at the given index.
ZipArchive::unchangeName — Revert all changes done to an entry with the given name.
CLXXXIX. Zlib
gzclose — Close an open gz-file pointer
gzcompress — Compress a string
gzdecode — Decodes a gzip compressed string
gzdeflate — Deflate a string
gzencode — Create a gzip compressed string
gzeof — Test for end-of-file on a gz-file pointer
gzfile — Read entire gz-file into an array
gzgetc — Get character from gz-file pointer
gzgets — Get line from file pointer
gzgetss — Get line from gz-file pointer and strip HTML tags
gzinflate — Inflate a deflated string
gzopen — Open gz-file
gzpassthru — Output all remaining data on a gz-file pointer
gzputs — Alias of gzwrite()
gzread — Binary-safe gz-file read
gzrewind — Rewind the position of a gz-file pointer
gzseek — Seek on a gz-file pointer
gztell — Tell gz-file pointer read/write position
gzuncompress — Uncompress a compressed string
gzwrite — Binary-safe gz-file write
readgzfile — Output a gz-file
zlib_get_coding_type — Returns the coding type used for output compression


Use the accounting equation to avoid errors and understand your company. . Yuan-Global . Discover the vast world of casinos, a haven for gaming enthusiasts.